Call wont go through on either side

myself and my partner are having a problem. both of us have been using skype with each other for a couple years now and never have had this problem. were both signed in to skype today but she looks as if shes offline and on her side she said i look like im offline as well. and we cant call each other, the call just drops. both of our online settings are not set as invisible or offline either. we were just on yesterday no problems but today it wont let us. we have restarted our computers and skype a few times. still skype connects but wont let either of us call each other. what could be the problem?

chase_bjork wrote:
myself and my partner are having a problem. both of us have been using skype with each other for a couple years now and never have had this problem. were both signed in to skype today but she looks as if shes offline and on her side she said i look like im offline as well. and we cant call each other, the call just drops. both of our online settings are not set as invisible or offline either. we were just on yesterday no problems but today it wont let us. we have restarted our computers and skype a few times. still skype connects but wont let either of us call each other. what could be the problem?
Can you both please make sure you are using the latest version.
Before trying to isolate an issue, it's always best that one is running the latest Skype release. Which may in itself resolve the issue.
A new version has just been released September 1, 2011:
Please download/install this version from here, when prompted click the open or run button: http://download.skype.com/SkypeSetup.exe
This new version is 5.5.0.115 to check what version you have, using the main Skype client window please do:
Help -> About Skype
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Similar Messages

My calls wont go through and and the number and four others are displayed at the top of the screen

I already posted it once. What happened?

If you can't connect to celluar data, you'll need to take that up with AT&T.

My mail app wont open so that i can view it but it wont let me 'quit' either so I cant just do a restart to do updates and troubleshoot?

my mail app wont open so that i can view it but it wont let me 'quit' either so I cant just do a restart to do updates and troubleshoot?

Yeah I did that just after posting this and was able to then follow through with the above steps. All good! thanks for replying

Issues in calling Sql Loader through forms developer (10g)

Hi,
I am developing a form(in 10g) ,in which I am calling sql loader for loading data onto a oracle database table from external source (e.g. data file is a .CSV file).
But , somehow the sql loader is not getting executed.
Here , I am giving the environment settings , approach i am taking;
This is a distributed system , both the application server,and database server are mounted on two different servers.
The form is delpoyed on the application server.
The database table , and the sql loader are configured on the databse side.
I am using host(<sql loader command>) command to invoke the Operating System command through forms.
The sql loader is working ok , and the data is getting loaded successfully onto the required database table when I am executing the sql loader command on Unix prompt , but through the forms , it's not working.
Do I need to change some environmental setting to make this work...
Any quick help in this regard is highly appreciated.
Thanks.

Hi Craig,
I have already tried out the option of calling sql loader through stored procedure,but this is not working ...
could you please share any examples to do so ...
code snippet i am using in forms:
declare
usid get_application_property(userid);
pwd get_application_property(password);
db get_application_property(host);
msqlldr varchar2(250);
begin
msqlldr:='/u01/oracle/formss/bin/sqlldr' username=<uid/pwd@db> control=<control file name> data=<data file name> log=<log file name>
hosts(msqlldr);
end;
Note that sqlldr command ,for that matter any unix shell command is not working through the hosts() command ...
could you please suggest any way out ...
Thanks.

Pagination with 10 pages - 5 either side

Hi all,
I'm trying to get some pagination to my results page.
I would like the navigation links to only show 5 pages on either side of the current page.
For example if I have 40 pages in total:
Page 1 shows:
*1* _2_ _3_ _4_ _5_ _6_ _7_ _8_ _9_ _10_ [_Last_] Next
Page 18 shows:
[_First_] _14_ _15_ _16_ _17_ *18* _19_ _20_ _21_ _22_ _23_ [_Last_] Next
Currently I have all the page links (1-40 echoed) by using this tutorial:
http://www.phpbuilder.com/tips/item.php?id=2
Hope someone can help as I'm completed stumped!

If my very quick scan of the article was correct you'll need to change the loop start and end values in this part of the code:
// Now loop through the pages to create numbered links
// ex. 1 2 3 4 5 NEXT >>
for ($i=1;$i<=$pages;$i++) {
// Check if on current page
if (($offset/$limit) == ($i-1)) { Change the loop bounds 1 and $pages. You'll need to do some maths to work out the current page number, and then add and subtract 5 for the start and end. Make sure not to go past the start or end of the set of pages. Good luck.

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

SELECT call performance increase through archiving...

Hi all,
Short description : SELECT call performance increase through archiving records that satisfy a particular criteria like a cut off date. Is there any way i can intercept a select call on the real table and make it return records from the real or archive table based on the criteria (dates) issued in the call.
Long description:
I've been given the job of decreasing the execution time of a select statement on a particular database consisting of a few lakh records. the premise is that not all of these records need to be searched through for a normal query. only audit reports need access to the entire table. the additional premise is that the separation of tables should be transparent to the program (no changes can be made to the code). given these premises, i've been toying with some ideas that have not helped me out.
* Read about Fine Grained Auditing that kind of allow a trigger on select which would change the sql query to select from either the real or archive table( not sure if this will work either). But my production system uses oracle 8i. so no FGA :-(
* thought of create/replace a view that would restrict the rows based on a cut off date. but this would require code changes to make select calls on the actual table whenever an audit is required.
Is there any way i can intercept a select call and make it select from one/ both of the tables based on the criteria (dates) issued in the call.
any other suggestions on this kind off transperant archiving is welcomed.

Do your queries have a WHERE clause? If so, and the table is partitioned by date, Oracle can implicitly eliminate all the older partitions.
If your queries are not currently limiting themselves to a particular date range, you could also create a parameterized view with sys_context. Without changing your application, you would need to ensure that there were different users for different roles (i.e. an audit user would have a login trigger that set up a different context than a login trigger for a normal user). If you can make small changes to your application, you could add a call to set the context whenever you want to change roles.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Incomings calls wont appear on screen with IOS8.1

After installing IOS 8.1 when somebody is calling me, the call wont appear on the screen even when the phone is unlocked. (the phone vibrates and sounds the ringtone when called)
Somebody having the same problem?

Hi, lizhou888.
Thank you for visitng Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through.
Screen won't lock or go black when answering calls
Verify mute or speaker have not been activated, just prior to placing your ear over the receiver.
While on a call hold your hand over the top third of the display, and verify that the screen is locked or goes to sleep.
Try turning iPhone off and then on again.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If the issue persists, see the section labeled Issue not resolved.
Jason H.

Black lines on either side of images in FCP Canvas

I'm posting this in the QuickTime forum because this happened since installing QT 7.1.
I use an app called Photo to Movie to do slow pans and zooms across still images rather than use the features within FCP, because it creates a nice smooth ripple free transition.
It is set up to create a five second 720x480 movie which I import into FCP.
Everything was going swimmingly until I installed QT 7.1 and now there's a 4 or 5 pixel black bar on either side of the image. It's also producing 640x480 movies for some reason.
Strange thing is that when I view the movie within QuickTime it looks fine, but when viewing the preview version in the Finder and also the Canvas in FCP the bands appear.
I reported the bug to the folks who make Photo to Movie, LQ Graphics, but also thought I'd report it here seeing as it's definitely a 7.1 issue.
BTW don't bother asking what version of this and that I have, everything is the latest.

Not answered, but none forthcoming either so closing this one out.

I have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

i have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

Hello aalapdesai112,
Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Regards,
-Norm G.

My 3g is stuck on a screen that only allows emergency calls, wont conect to itunes, doesnt change when turned off or plugged in, any ideas how to fix it?

my 3g fell in toilet thursday, dried out and worked yesterday, now its stuck on a screen that says emergency call. wont connect to itunes, doesnt change when turned off or plugged in, any ideas

If you are eligible for a discounted upgrade through your carrier, this would be a great time to consider it. The phone is most probably permanently damaged.

Unity Express - Incoming calls wont get voice mail

CUE works fine with telephones on my local network. Incoming and outgoing calls work fine.
However when I get an incoming call via SIP trunk the call will not get forwarded to unity express after 10 seconds. The line goes dead.
I searched for another post which suggested the following commands:
telephony-service
call-forward pattern .T
voice service voip
allow connections from h323 to sip
I've double checked them and there's still something wrong.
Here's my current configuration:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
telephony-service
load 7910 P00403020214
load 7960-7940 P00305000301
max-ephones 24
max-dn 24
ip source-address 192.168.20.1 port 2000
auto assign 1 to 24
system message Comtek
voicemail 3000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
time-webedit
transfer-system full-consult
transfer-pattern 2...
transfer-pattern 3...
directory last-name-first
directory entry 2 2001 name Phone Two 7912
directory entry 3 2000 name Phone One 7970
ephone-dn 1 dual-line
number 2000 secondary 441833000000
call-forward busy 3000
call-forward noan 3000 timeout 10
no huntstop
ephone 1
no multicast-moh
device-security-mode none
mac-address 0017.0EF0.3642
type 7970
button 1:1
So pros, any suggestions?
Thanks

I made a new dial-peer to handle incoming calls as follows.
dial-peer voice 1000 voip
description Incoming SIP
translation-profile incoming SIPin
voice-class codec 1
session protocol sipv2
incoming called-number .T
dtmf-relay rtp-nte
no vad
The translation-profile puts the call through to my 2000 extension.
This is my "show call active voice brief" when an external incoming call is ringing through to my 2000 ephone-dn.
To me this seems to show the dial-peer "1000" matching and using the g711ulaw codec
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1715 : 552 596706500ms.1 +-1 pid:1000 Answer +441833696807 connecting
dur 00:00:00 tx:0/0 rx:0/0
IP 87.127.240.98:16188 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1715 : 553 596706510ms.1 +-1 pid:20001 Originate 2000 connecting
dur 00:00:00 tx:0/0 rx:0/0
Tele 50/0/1 (553) [50/0/1.0] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
This is the "show call active voice brief" for an external incoming call when the call is established.
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1731 : 569 597220040ms.1 +3730 pid:1000 Answer +441833696807 active
dur 00:00:02 tx:105/16800 rx:104/16640
IP 87.127.240.98:15162 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1731 : 570 597220060ms.1 +3700 pid:20001 Originate 2000 active
dur 00:00:02 tx:0/0 rx:105/16800
Tele 50/0/1 (570) [50/0/1.0] tx:16180/16180/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
Not too sure where to go from here.

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer?

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer? Whether it's free or cost money, can someone please give me a name of a program or software that allows me to do this? I can't seem to find anything like this for the iPhone.

No.

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

Error while calling pscp.exe through a batch file which is called in SSIS Execute Process Task

Hi,
I am using Windows Server 2012 R2 Standard, SSIS 2012. I am trying to copy files from a remote location by calling pscp.exe through a batch file (FileCopy.bat at location M:\bin\) which is referenced in a SSIS Execute Process Task. My batch file content
is,
ECHO OFF
echo. >> M:\Prod\bin\SourceFile_FileLog.txt
echo %date% - %time% - Copy Start (XYZ_a201211155952avx0_69999.NOR.gz) >> M:\Prod\bin\SourceFile_FileLog.txt
M:\ProdFiles\bin\pscp.exe -unsafe -scp -pw aaaaa myuser@sourceserver:/ABC_data/*.NOR.gz M:\Prod\FromMediation\
echo %date% - %time% - Copy Complete >> M:\Prod\bin\SourceFile_FileLog.txt
The error I am getting is
[Execute Process Task] Error: In Executing "M:\bin\FileCopy.bat" "" at "", The process exit code was "1" while the expected was "0".
Exactly same setup but using Windows Server 2003 R2 Enterprise and SSIS 2005, this works fine and copies the files successfully.
Please provide some guidance on this.
Thank you!
'In Persuit of Happiness' and ..... learning SQL.

Hi,
This is what I am getting while running the batch file from command prompt
M:\bin\mttrb1>CDR_FileCopy
M:\bin\mttrb1>ECHO OFF
The system cannot find the path specified.
The system cannot find the path specified.
scp: M:\Prod\FromMediation\: Cannot create file
scp: M:\Prod\FromMediation\: Cannot create file
scp: M:\Prod\FromMediation\: Cannot create file
The system cannot find the path specified.
'In Persuit of Happiness' and ..... learning SQL.

Call wont go through on either side

Similar Messages

Maybe you are looking for