Callable Object from another server?

Is there any way of setting up a Web Dynpro application or component as a callable object in GP that was deployed to a server other than the portal server? Our WD apps and components will not be living on the portal server but we would like to set them up as callable objects within GP.
Thanks,
Cindy

This is the document I followed to create a WD callable object. However, the deployed object does not show up in the list of available WD objects. Other WD applications also do not show up in the list if I pick the WD application as a callable object to set up. My assumption is that if these are not deployed to the portal they will not show up in the list. Are there settings or some configuration for the portal that will allow WD apps, etc. deployed to other servers to show up in the list as available objects?
Thanks,
Cindy

Similar Messages

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

Transportation ( how to transport objects from one server to another)

Hi BW guru's
Please tell me the steps to transport objects from one server to another server.

Follow the steps.
1. RSA1 > Transport connection
2. In the right window there is a catagory "all object according to type"
3. Select required object you want to transport.
4. Expand that object , there is select object, double click on this you will get the number of objects, select yours one.
5. Continue.
6. Go with the selection, select all your required objects you want to transport.
7. There is icon Transport Object (Truck Symbol).
8. Click that, it will creat one request, note it down this request.
9. Go to Transport Organiser (T.code SE01).
10. in the display tab, enter the Request, then go with display.
11. Check your transport request whether contains the required objects or not, if not go with edit, if yes "Release" that request.
Thats it, your cordinator will move this request to Quality or Production.
Hope its helps.
Regards

How to transport objects from one server to another server?

How to transport objects from one server to another server.ie..from development to testing sewrver....

Hi Manoj,
Check these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Transporting Objects IR ID using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
You can choose either File transfer methor or CMS. File transfer method is the simplest.
Sachin

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Problem in accessing the media files from another server

Currently I am working in a project with streaming video on demand and using FMS 4.5.
Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
Please let me know:
If we need to configure any other parameter to stream videos from another server.
VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
          Please let me know can we stream using http also as we need this to run f4m manifest file.
          http://121.123.35.34:8134/vod/hr/sample.mp4.
          http://121.123.35.34:8134/vod/hr/sample.f4m
Thanks,
Anjali

Hi Shiven,
I followed the steps suggested by you:
1) Changed the stream:
<Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
http:// 121.123.35.34:8134/vod/test.mp4 or
http:// 121.123.35.34:8134/hds-vod/test.mp4
But not able to load the video.
Please suggest?
Thanks & Regards,
Anjali Rawat

Hi,how can i transport objects from one server to other like (Dev To Qty)

Hi Sir/madam,
Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
Regards,
Vishali.

Hi Vishali,
Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
Step 2: Release the subrequests first and then the main request by pressing Truck button
Step 3: STMS or Customized transactions
Object Collection In Transports:
The respective Transports should have the following objects:
1. Base Objects -
a. Info Area
b. Info object catalogs
c. Info Objects
2. Info Providers u2013
a. Info Cubes
b. Multi Providers
c. Info Sets
d. Data Store Objects
e. Info Cube Aggregates
3. Transfer Rules u2013
a. Application Components
b. Communication Structure
c. Data Source replica
d. Info Packages
e. Transfer Rules
f. Transformations
g. Info Source Transaction data
h. Transfer Structure
i. Data sources (Active version)
j. Routines & BW Formulas used in the Transfer routines
k. Extract Structures
l. (Note) If the transfer structures and related objects are being transferred without preceding
Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
Objects as well.
4. Update Rules u2013
a. Update rules
b. Routines and formulas used in Update rules
c. DTPs
5. Process Chains u2013
a. Process Chains
b. Process Chain Starter
c. Process Variants
d. Event u2013 Administration Chains
6. Report Objects u2013
a. Reports
b. Report Objects
c. Web Templates
Regards,
Suman

Accept Mail from another server

We are testing a migration scenario and are running into a few issues. I have our new mail server setup with the same domain as our old. We will slowly be migrating from the old to the new, sort of like a split domain. The old server is running GroupWise 7, the new is Zimbra based.
What I am attempting to do is allow for users on Zimbra (using the same domain) to be able to send messages to users on Groupwise. So far I have been unable to find a setting in GWIA that allows me to say it is "ok" to accept email from this server. I believe that since both the Zimbra and GW servers are using the example.com domain GW is not allowing messages to go to mailboxes.
How do I setup Groupwise to allow messages from another server using the same domain?

I doubt that is it. Your GW system is set to receive messages for
@example.com and shouldn't care where they have come from. Your Zimbra
server should be set to forward to GW as a smarthost and have it forward
undeliverables to that host.
Usually, the Zimbra side is going to have problems, especially if it has all
of the addresses configured on it. It knows that it handles email for
example.com and will try to deliver it to itself, unless you do something
with undeliverables instead.
I think.......................
"dabrown ksu" <[email protected]> wrote in message
news:[email protected]..
>
> We are testing a migration scenario and are running into a few issues. I
> have our new mail server setup with the same domain as our old. We will
> slowly be migrating from the old to the new, sort of like a split
> domain. The old server is running GroupWise 7, the new is Zimbra based.
>
> What I am attempting to do is allow for users on Zimbra (using the same
> domain) to be able to send messages to users on Groupwise. So far I have
> been unable to find a setting in GWIA that allows me to say it is "ok"
> to accept email from this server. I believe that since both the Zimbra
> and GW servers are using the example.com domain GW is not allowing
> messages to go to mailboxes.
>
> How do I setup Groupwise to allow messages from another server using
> the same domain?
>
>
> --
> dabrown_ksu
> ------------------------------------------------------------------------
> dabrown_ksu's Profile: http://forums.novell.com/member.php?userid=90079
> View this thread: http://forums.novell.com/showthread.php?t=415905
>

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Loader will load images from another server, but then we get error on Bitmap operation

I'm developing an app that currently is using Loader to get images from another server. This shouldn't currently work since we are still waiting for the owner of that server to put a crossdomain file in place. However, it does work -- sort of .
Loader can load the images fine, without an error. But then the app has a feature in which we are making a larger duplicate of the image to display in a sidebar, we do this in this manner:
var myBitmap:Bitmap = Bitmap(loader.content);
and when this runs we get a Flash player security error 2122, sandbox violation.
So while I'm hoping all this will fix itself when the crossdomain.xml file is put in place, I'm confused as to why we only get the sandbox error when we make a Bitmap from the image, and not when we initially try to retrieve the image.
(Incidentally: is there a better way to make a "copy" of an image loaded by a Loader, and then change its width and height for simultaneous display in another part of the stage? I don't need to change its actual dimensions -- I just need to change its display width and height.)
Thanks!

The sandbox allows viewing, not editing from another server without a crossdomain.
So, when you try to load it up, it loads it, but "read-only" and gives you an error when you try to "edit" it by making a new Bitmap out of it.
This should resolve itself once that crossdomain is in place.
||EDIT||
I just realized I should clarify my statement a little more.
When you load images from another server without a crossdomain, it allows the load for display only. When you try to load data, it will fail. This is because, XML data, or some other type of data is editable by default, and images are only viewable by default. So, the image fails when you try to convert it into an editable form.

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

Connecting to a NT server from another server

Hello, All. I was wondering If anyone knew the best and more efficient way to connect to a NT server from another server. Once the connection is made I need to be able to execute .cmd file on the NT server.
Thanks
Donald

I doubt if there is a "best" way. Do you want to do this programatically or interactively?
Interactive methods include:
Run a terminal server on the NT box and telnet to it.
Run a webserver on the NT box and create some simple server side script to execute the .cmd
Programatically:
Create a simple server to listen on a port, recieve connections, and execute command that are passed. (This is signicantly more arduous than the interactive methods, especially if you want some user authentication).
Use RMI or CORBA

Loading a movie on html from another server

I have a question: I have a form on Flash and I want to make
the swf file a part of a HTML page.
Here is the(for me) tricky part: on Flash I use an external
php-file to send the information back to me, but the server where
the HTML page runs is an ASP.Net server. So I came up with the idea
to load the swf file from another server that runs the php-script.
But is not working.
Does anyone know if what I am doing is correct? Do I have to
write some code on flash or the HTML-page? Or do I just have to go
and learn ASP.Net?
Thanks a lot for any information.
Norman Parra

No. Movies are not eligible for iTunes in the Cloud (the movie studios won't grant Apple the necessary permissions, reportedly). So if you want the movie on another computer, you have to copy it there yourself from your work computer. Copy the movie to some removable medium or shared location, then just drag it into the iTunes window on your laptop.
Regards.

Transfer of business object from development server to testing server

if i want to transfer business object from development server to testing server how can i do that?
what is the system landscape?
what is business object?

Hi Rizwan,
U can get details of Business Objects in tcode - SWO1.
Business objects are real world entities modeled as objects in an information system.
Business objects encapsulate both data structures and the functions applied to the data, but hide their full complexity from other objects. This encapsulation of data and functions makes it easier to modify program components, because you can program with the relevant entities without having to know all the implementation details. You can also reuse existing functions.
Client programs access business objects by reading their attributes, or by calling the methods that make up the objectu2019s interface:
Attributes
Attributes describe the data stored in an object through a set of properties. They provide direct read access to the data structures of objects, but client programs cannot change them from outside.
Methods
Methods provide a way to encapsulate the data structures of business objects, and to process them. When accessing an object, the client program calls a method with parameters and gets back return parameters.
Interface
The interface is the set of methods associated with a business object, and determines how an object interacts with the outside world.
The client program defines the object types to be used and, at runtime, creates object instances of those object types.

How do I import email messages from another server?

Heya,
So I can't figure out how to import mail messages from another server into this one? I had [email protected] pointing to the old one, when I repointed it obviously all my email "disappeared" because there is none on the new server. So how do I move it from the old server to the new one? Usually I'd just drag and drop the email message files over FTP but SLS doesn't seem to give me permission to do that on this one.
Thanks!

Search for discussions of the imapsync tool.

Callable Object from another server?

Similar Messages

Maybe you are looking for