Callback message not appearing on Siemens Hicom connected phones

We have connected two Siemens Hicom 350 PABXs using E1 controllers on two routers. The routers are connected via an IP (over ATM) link. Siemens digital phones are connected to each PABX. Calls are going across smoothly, however, when callback feature is initiated from a phone on one PABX to a phone on the other PABX, the initiating phone shows the message "Not possible" although the callback is actually set and does call back. The message should show as "Will call back".

Ok, the situation now is pretty bright. I think you should have noticed the error in the second debug output. The Cisco has hard time in parsing/decoding the ISDN Q.931 packet and therefore shot an error message.
Could you provide me with the IOS versions of the gateways, or even better - the H323 versions they are running.
For the time being, I would recommend to you to issue the global command "isdn gateway-max-internetworking". With this command the Cisco gateways will try to do their best to pass transparently the unknown ISDN packets without trying to decode them. Let me know if that works.
After checking the H323 version, compiled into your gateway's IOSes, you should see if they are running H323 version 2,3, or 4. AFAIK, 12.3 IOSes are running H323 version 4, which has the ability to "tunnel" QSIG messages over the IP.

Similar Messages

  • My iPhone 4s does not appear on devices when connected to iTunes in my Mac

    My iPhone 4s does not appear on devices when connected to iTunes in my Mac

    Check to make sure you have enough free space to include the videos.

  • My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop.  It does not appear in iTunes as connected, either.

    My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop.  It does not appear in iTunes as connected, either.  It does show that it is connected and charging on the phone itself.  This is a new problem.  It used to work just fine.

    Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian

  • Bell icon (symbol) does not appear when i put my phone on silent

    Bell icon (symbol) does not appear when i put my phone on silent (or vice-versa) when in standby mode. Help.

    I would try a reset
    Also look here
    https://discussions.apple.com/message/9446783#9446783

  • New Skype Emoji not appearing on Skype for Windows Phone

    Posted here because I couldn't select "Skype for mobile" in the Windows 10 Edge browser... I've noticed that emoji like (Windows10) do not appear in Skype on Windows Phone.  Instead, I see an empty white box.  I also don't see the text of the emoji. Seems like an issue with Skype for Windows Phone where the app understands that (Windows10) is an emoji, but can't find the image to display.   

    Please,  run the DirectX diagnostics tool (32-bit option only).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Call Message Not Appearing

    Hello!
    I was using Skype for a few months, but about a week ago, I noticed a problem. When my friend calles me, I the  call message (the blue one at the top right corner) does not appear. When he writes to me, however, everything's fine, and the message appears. I don't know what's the problem, I haven't changed any settings. I'm using Windows 8, and I have Skype from the Windows Store. Please help me.

    Having same problem.
    While I'm on Audio call, I can send IMs to anyone except the person(s) I'm on call with. If I go to recent chats, when I click on another person I get the chat screen with some previous messages, but when I click the person I'm on call with, I get connection pane, with his profile pic all over the screen.
    If that person sends me an IM, then the message appears in blue bubble, and disappears after a while, but I can't see previous messages.

  • ChaRM - Message not appearing in CRM Web Client

    Hi
    My company is using ChaRM and have ZMCR setup for Change Requests. Due to audit reasons, the requester and approver in ZMCR cannot be the same person.
    I have gone into SE91 and access message class SOCM_ACTION_LOG. Here, I have created my new message.
    I have then gone into SPRO and setup all the necessary configuration.
    And it works perfectly!!!! EXCEPT.....the error message doesn't show in CRM Web Client UI. So the functionality is working fine but obviously we need the message to appear so users no why the change request hasn't changed status.
    Firstly, here is my config in SPRO:
    And this is what's showing in CRM Web Client:
    I have read online that function module CRM_MESSAGE_COLLECT is used to show messages in CRM Web Client. I am not an ABAPer. How does this function module work? What do I do with it? Or is there something else I need to do for this message to show?
    Pretty sure my config is spot on so just need some advice on how to get the message to show.
    Thanks very much!!!!!!!
    Shaun

    Hi Shaun,
    Did you register your custom messages in the SPRO settings? You need to use Appl. Area SOCM_ACTION_LOG and make an entry in the below tanble for Single Messages;
    Regards,
    Vivek

  • My iphone does not appear in itunes when connected to my computer

    When I plug in my iphone to my computer it is not appearing in itunes.
    I can see in my computer that the phone is connected and photos can be browsed through MyComputer so the cable is making the connection.
    any ideas?

    Hey dalustig59,
    Thanks for the question. I understand that you are experiencing issues with your iPhone being recognized in iTunes. The following resources may provide a solution:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device detected but not identified properly on iTunes for Windows
    http://support.apple.com/kb/TS2818
    Thanks,
    Matt M.

  • Error code message not appearing

    Hi,
    I tried to create a set of labview error codes codes using tools-> edit error codes.  A created a few test errors and saved the file in 
    C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
     The file called test-errors.txt appears as follows:
     <?xml version="1.0" encoding="ISO-8859-1"?>
    <nidocument>
    <nicomment>
    First error code file Sean
    </nicomment>
    <nierror code="5000">
    Device unstable
    </nierror>
    <nierror code="5001">
    Device Critically Unstable
    </nierror>
    <nierror code="5002">
    Press Stop or device will begin countdown to destruction
    </nierror>
    <nierror code="5003">
    Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
    </nierror>
    </nidocument>
    I then designed a simple VI to test the error codes, see the attachment.  However the error message do not appear in the error out source box. 
    Does anyone know why LabVIEW is not recognising my error codes?
    Rgds,
    Sean
    Solved!
    Go to Solution.
    Attachments:
    test.vi ‏12 KB

    Hi Sean,
    OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
    All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
    Like i say, it works but if there is a better solution let me know!
    David
    David
    www.controlsoftwaresolutions.com
    Attachments:
    Error cluster from error code (with description).vi ‏13 KB

  • Why are some inbox messages not appearing in Mail on multiple macs and other devices?

    My partner and I have an iMac at home and one at work.  We also have two iPhones and two iPads.  We only have a couple email accounts each and two for work set up on all six Mail applications.  For some reason inbox messages are not appearing consistantly on all six devices.  For example, I can have a new message from my Mom, see it at home and on my iPhone, but not on the iMac at work.
    Also, some messages I'd like deleted off my work iMac since they're personal, but I'd like them kept on my home iMac and iPhone.  Is this possible?  Is it possible to delete a message on one and have it deleted on all others?
    Message was edited by: witboy

    What type of email accounts are they? IMAP or POP.
    IMAP leaves messages on the server so you can get them from everywhere.
    With POP, messages are downloaded to your client and then removed from the server, depending on your settings.
    The iDevice setup for POP doesn't remove them from the server.
    I think Mail's default setup for POP is to remove immediately.
    If they are POP accounts, you can set Mail's preferences to leave messages on the server for a period of time so that you can retrieve them on multiple clients.

  • Raised Messages Not Appearing In ByDesign

    Hello everyone,
    Simple question --- I have a message on a custom BO I want to appear in ByDesign should a script successfully run. The message appears with the correct values in the debugger if I have it open, but nothing comes up along the bottom of the screen in ByDesign, whether the debugger's open or not.
    I was under the impression that all I had to do was write:
    raise MessageName.Create("S", <parameter list>);
    And it would appear, but apparently not. The screen in question is the file input screen: I want a message to appear should the file input successfully trigger and run an AfterModify script to completion. Any ideas? Thanks!
    Lewis

    Hi Frederick,
    In order to be able to display synchronous messages in SXI_MONITOR you have to set the following
    parameter in SXMB_ADM.
    Go to SXMB_ADM --> Integration Engine Configuration. Click on 'specific Configuration'.
    Add the following parameter:
    Category: RUNTIME
    Parameter: LOGGING_SYNC
    Value: 1.
    Hope this helps you.
    Carlos

  • Itunes 11.1.5 synchronization page does not appear when iphone is connected to imac !

    Today I updated itunes version 11.1.5  but when I connected my iphone 5c , the synchronisation page did not appear.  I could not synchronise my phone right away from the page that it used to appear once the phone is connected.
    i can see iphone appearing on the top right hand side tab  (where you disconnect the phone)
    I can see my phone from the file tab- Synch "Amani's iphone" where I synchronised the phone.
    But I want to see all the info about my phone, and I rreally need  this page back, is it called the synchronisation page? I am not sure
    Please help. I am so annoyed with this,
    my phone software is IOS7.1
    my imac peratin system is : 10.6.8 Snow Leopard

    Hello 51kFred,
    Here is a resource that should help resolve the iPhone not showing in iTunes.
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/#section_1
    All the best,
    Sterling

  • Messages not appearing on mac with mountain lion.

    I downloaded ML and have an iphone 4 with up to date OS software. Is there a reason that my messages are not appearing on both? I have enabled messages on both devices, but nothing is transferring over. In fact I think that some imessages are not coming through to my cell phone at all.

    You have to set this up a certain way to work.
    On your Messages program on your macbook, make sure the account is using the same account as on your iPhone.  On your iPhone, go into Messages settings, and make sure you are using your email address (the one from your account) as your caller ID.  When you begin an iMessage conversation with someone, it will show up in both.

  • Group text messages not appearing in messages

    I am receiving all one to one text messages on my iPhone and Macbook, but group strings are not appearing on my macbook pro.  Am I missing something?  I've deleted existing threads from phone, power cycled, and still no joy.

    Hi,
    I too have the same annoying issue. I have to continuously take out the battery and restart my Q10 in order for my text messages, facebook, and email notifications to come in. This is my second Q10 now as the first one started freezing when I tried sending emails so I thought the Hub problem was related to a faulty phone but now that I have my second one, the same problems are happening (except for the freezing of the phone). It is incredibly frustrating that a phone in this price range has such a basic fault when the main purpose of a mobile phone is to receive phone calls, text messages, and emails!!
    I have also found that I have multiple contact details for the same person and that if I try to call someone's mobile that begins with 04 (Australian mobiles) I get told I can't call that number, but if I call a mobile with +61 (Australian country code) I get through to them! The phone also wont save contact details of people who only have a landlines number.
    I have been with Blackberry for 6 years now and this is my 4th BB phone. I have always been a staunch advocate of the Blackberry until now. These software issues should not be happening in a high end phone.
    Blackberry, please create a fix for these basic issues as soon as possible.
    I have a Blackberry Q10; OS version 10.1.0.1910; Build 517312; and Software Update 10.1.0.314
    Many thanks

  • My ipod touch 4g does not appear in itunes when connected

    My ipod touch 4g does not appear in itunes when connected

    See the suggestions in this article.
    http://support.apple.com/kb/TS1538
    B-rock

Maybe you are looking for