Caller 09 contains error messages in infopackage for master data

Hello
we are facing issue in info package some records were available in psa and then we got the job cancelled at R3 side and the short dump attached screen shot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart

Hi,
Can you please check the extractor in RSA3.
Also try to find the record which is failing and fix the Profit Center for that record.
If you dont know exact error record, please take help from FICO guys.
Else do random loads like, if total no of records are 100
Load 50 records by giving selections. If it went fine, then go to next 50. Do loads in Binary search way.
Regards

Similar Messages

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Error with "Creating Transformation for Master Data"

Hi!
I have the following error, when I try to create a transformation in SAP Solution Manager.
Error analysis
Short text of error message:
Network could not be launched due to control error
Long text of error message:
Diagnosis
Network control cannot be started either because is is not installed on the front-end computer, or because the control framework is inconsistent when the function is called up. To be able to start the network graphic, you need two OCX files that are delivered with the BW Frontend.
System Response
Processing has been terminated.
Procedure
Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
installed on your computer. You can find notes on installing and
checking the BW Frontend by searching for SAP Notes with the
following key words:
Version, sapservX, Setup, Patch, Installation, Frontend, BW,
sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
If the front end is installed correctly but the error still occurs, contact SAP.
Procedure for System Administration
Technical information about the message:
Message class....... "RSNG"
Number.............. 001
Variable 1.......... " "
Thank you very much!
regards
Thom

It seems like probably the installation is not proper.
Or
you don't have the SAP BW Data Flow Control for Administration Workbench installed in your system
This is what i found
wdbdadpt.ocx (SAP BW Data Flow Control for Administration Workbench) is a component from the software SAP BW Data Flow Control for Administration Workbench version 3020.6.21 by SAP AG, Walldorf. wdbdadpt.ocx version 3020.6.21 has a file size of 99,216 bytes, and is most commonly found under the directory "Controls" with a creation date of January 14, 2006
Seems like some one else also got this issue
Getting short dump in BI system, transaction RSA1
Regards,
Zaheer

Message Type inconsistent for Master Data Deltas

Hi All,
I have a question regarding the message types for the master data deltas. What I noticed on our server was that the message types (TCODE: BD52) is different for different severs for the same master data deltas (mostly they would begin with RS. If you do a wild card search RS*, you would find them for the different master data delta enabled extractors). Is this standard or is there something that we can do about it? I only ask because we modified the message types for one of the extractors to <u>create</u> a delta for the enhanced field on our extractor. This was done to create a delta when the enhanced field changes when nothing else changes on our standard extractor.
Please advise. Also let me know if you want me to clarify something above.
Regards,
Ashmith Roy

RSnnnn message type is created/assigned(in the source system) first time you initialize the delta for the master data. Hence it is normal to have different no assigned to different master data depending on when the particular master data was init (on that system).
When you say you enhanced the message type, what did you do?

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

LiveCycle unable to access Cache Controller. Exception message - Error accessing the cache container - Error on GET action for cache Replicated:UM_CLUSTER_INVALIDATION_CACHE

The incident starts after all the members are removed from the DCS Stack DefaultCoreGroup view and added back again by WebSphere Application Server. Following exceptions are seen after LiveCycle was added back in again to the view.
We have a clustered environment with two nodes 2A and 2B. Server 2A crashed and therefore all members on 2B node were removed from the DCS view. Later the new core group view was installed but LiveCycle did resume operations as expected.
Errors below:
Exception caught while dealing with cache : Action - Get, ObjectType - UM_CLUSTER_INVALIDATION_CACHE, Exception message - Error accessing the cache container - Error on GET action for cache Replicated:UM_CLUSTER_INVALIDATION_CACHE
ServiceRegist W   Cache get failed for service EncryptionService Reason: Error accessing the cache container - Error on GET action for cache
Error accessing the cache container - Error on GET action for cache Local:SERVICE_FACTORY_CACHE
The following message appeared for several different services:
Cache put failed for service [CredentialService, ReaderExtensionsService,EncryptionService, etc]
SSOSessionCle W   Error in cleaning stale sessions from the database. These sessions would be deleted in next trigger
                                 java.lang.RuntimeException: com.adobe.livecycle.cache.CacheActionException: Error accessing the cache container - Error on ENTRYSET action for cache Local:UM_ASSERTION_CACHE
at com.adobe.idp.um.businesslogic.authentication.AssertionCacheManager.removeExpiredResults( AssertionCacheManager.java:125)
at com.adobe.idp.um.scheduler.SSOSessionCleanupJob.execute(SSOSessionCleanupJob.java:69)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: com.adobe.livecycle.cache.CacheActionException: Error accessing the cache container - Error on ENTRYSET action for cache Local:UM_ASSERTION_CACHE
at com.adobe.livecycle.cache.adapter.GemfireLocalCacheAdapter.entrySet(GemfireLocalCacheAdap ter.java:219)
at com.adobe.idp.um.businesslogic.authentication.AssertionCacheManager.removeExpiredResults( AssertionCacheManager.java:99)
... 3 more
Caused by: com.gemstone.gemfire.distributed.DistributedSystemDisconnectedException: GemFire on 2B<v1>:9057/51073 started at Sun Aug 17 08:57:23 EDT 2014: Message distribution has terminated, caused by com.gemstone.gemfire.ForcedDisconnectException: This member has been forced out of the distributed system. Reason='this member is no longer in the view but is initiating connections'
at com.gemstone.gemfire.distributed.internal.DistributionManager$Stopper.generateCancelledEx ception(DistributionManager.java:746)
at com.gemstone.gemfire.distributed.internal.InternalDistributedSystem$Stopper.generateCance lledException(InternalDistributedSystem.java:846)
at com.gemstone.gemfire.internal.cache.GemFireCacheImpl$Stopper.generateCancelledException(G emFireCacheImpl.java:1090)
at com.gemstone.gemfire.CancelCriterion.checkCancelInProgress(CancelCriterion.java:59)
at com.gemstone.gemfire.internal.cache.LocalRegion.checkRegionDestroyed(LocalRegion.java:669 4)
at com.gemstone.gemfire.internal.cache.LocalRegion.checkReadiness(LocalRegion.java:2587)
at com.gemstone.gemfire.internal.cache.LocalRegion.entries(LocalRegion.java:1815)
at com.gemstone.gemfire.internal.cache.LocalRegion.entrySet(LocalRegion.java:7941)
at com.adobe.livecycle.cache.adapter.GemfireLocalCacheAdapter.entrySet(GemfireLocalCacheAdap ter.java:209)
... 4 more
Caused by: com.gemstone.gemfire.ForcedDisconnectException: This member has been forced out of the distributed system. Reason='this member is no longer in the view but is initiating connections'
at com.gemstone.org.jgroups.protocols.pbcast.ParticipantGmsImpl.handleLeaveResponse(Particip antGmsImpl.java:106)
at com.gemstone.org.jgroups.protocols.pbcast.GMS.up(GMS.java:1289)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.VIEW_SYNC.up(VIEW_SYNC.java:202)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.pbcast.STABLE.up(STABLE.java:276)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.UNICAST.up(UNICAST.java:294)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.pbcast.NAKACK.up(NAKACK.java:625)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.VERIFY_SUSPECT.up(VERIFY_SUSPECT.java:187)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.FD_SOCK.up(FD_SOCK.java:504)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.FD.up(FD.java:438)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.Discovery.up(Discovery.java:258)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.TP.handleIncomingMessage(TP.java:1110)
at com.gemstone.org.jgroups.protocols.TP.handleIncomingPacket(TP.java:1016)
at com.gemstone.org.jgroups.protocols.TP.receive(TP.java:923)
at com.gemstone.org.jgroups.protocols.UDP$UcastReceiver.run(UDP.java:1320)
at java.lang.Thread.run(Thread.java:773)
[22/08/14 0:28:10:237 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:29:10:252 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:30:10:268 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:31:10:283 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:32:10:298 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:33:10:313 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:34:10:328 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:35:10:343 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:36:10:358 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:37:10:373 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:38:10:389 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerExceptionor
I have tried looking for the root cause about why LiveCycle was not able to resume normally, didn't find anything related.

LiveCycle uses Gemfire as distributed cache for cluster members. If you are using TCP Locators (caching based on TCP instead of UDP), below are the possible situations which might lead to “ForcedDisconnectException” :
- There is time difference between two nodes.
- These is network connectivity issues.
- The high CPU usage by the member crashed.
-Wasil

Caller 09 error message in bi 7?

Hi all,
I am getting an error in the pc " caller 09 contains error message:, i ran the abap program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data source. but after i select the data source and ran the program i am still getting
There is no DataSource with these attributes
but there is a datasource in the system!!
Can anyone pls help me on this!!, and this error is on BI 7 system!!
Thanks
Pooja

Hi Hari,
For DS activation you can goto edit mode of DS & activate . It is not always necessary that you should run the program to activate the DS.
Also in which system you are running the program?
R/3 or BW system?? I hope since your source system is R/3, you will be activating it in R3 by running the program & in BW side, do it manually if you cant do it using the program.
Hope this should solve your problem.
Regards,
Pavan
Edited by: PavanRaj_S on Jul 5, 2010 2:27 PM

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

SHR1 - Call contained Errors

Hi,
I am getting error for SHR1 Transaction.
in SHR1 Transaction when i give Resource, and go for Generate Shift report i am getting this error.
Error Message is FPRUNX003 and call contained errors:ADS(2).
Can any one explain.
Thanks
Nag
Edited by: nag1975 on May 18, 2010 7:38 AM

Dear Nag,
transaction SHR1 need ADS as precondition. As SHR1 display the result in PDF the installation of ADS is necessary. If ADS is not implemented or not correctly implemented you get error "Error Message is FPRUNX003 and call contained errors:ADS(2)."
So please make sure adobe document services setup (ADS) is correct.
Regards
Sabine

Cancel a SD invoice error message "no authorization for transaction FB08"

Hi Gurus,
I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
regards
Anmol Pareek

Hi Anmol
Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
take help of your basis team.

Error message -L3199-Total for assigned quantities exceeds quantity to be removed

Hi,
We are facing problem in picking at last HU in WM while creating transfer order for delivery document in PRD. We reproduced same issue in QXS.
Sales order was created with 40 Drums and also delivery with 40 Drums. Conversion factor mantained in material master is 441 DR = 30000KG, Base unit of measure is KG. While creating TO , we need to insert 5HU(each HU = 8DR) i different line items in TO . Tilll 4th HU is inserted i.e 32 DR(total) there is no issue. But as soon as we enter 5th HU below error is throwing.
Error Message - L3199-Total for assigned quantities exceeds quantity to be removed
In some cases delivery qty is showing more than picked qty (in other deliveries) and hence unable to create or confirm Transfer order.
Appreciate your comments on above issue /resolution or any OSS note/user exits/BADI exists ?
Regards,
Srinivas M

there is a huge amount of decimal dust
1 drum has a weight of 68.02721088435374
calculating the weight of 40 drums (quantity to be removed) in one single calculation rounds different to 5 * 8 drums where you actually have 5 individual calculations with a rounding that is then added to one result (assigned quantity).
Have a look into this KBA, as it explains different reactions based on the screens that are used.
However, I think you will not get lucky by this workaround as the you still have inaccurate quantities for the remaining drums
1926014 - LT03 - Overpicking allowed / not allowed during TO creation in foreground

Sony BRAVIA Call failed error message

I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??

Shorty wrote:
Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
Skype on my phone works better, with better video and sound quality. That's where I'm at.....
Maybe I'm on a downer tonight...

ERROR MESSAGE - Ivalid operation for forward only resultset : first 17075

Hi, all, I'm using Jdbc Drive Oracle JDBC driver 8.1.7.0.0 and weblogic. However, when I do:
Statment stmt = (CallableStatement) conn.prepareCall("{call some_pkg.p_searc(?,?,?,?,?,?,?,?,?)}",
ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
ResultSet.first();
I got the error message: Ivalid operation for forward only resultset : first 17075.
Thanks.
Mag

Thanks for your reply. But what I want to use first. One thing I don't understand is why even I use ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY, but the resultset is still not scrollable. How can I get a scrollable resultset. Thanks.

Error message appears only for a short time

An error message appears only for a very very short time so i can't read it. Sometimes the message appers directly after log in, and sometimes after using the mac for a longer time. So What should i do?

Thank you for the fast reply.
This is the log of the last start. The message appeared directly after login.
06.03.12 21:37:47,000 bootlog: BOOT_TIME 1331066267 0
06.03.12 21:38:00,000 kernel: PMAP: PCID enabled
06.03.12 21:38:00,000 kernel: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
06.03.12 21:38:00,000 kernel: vm_page_bootstrap: 2003650 free pages and 77118 wired pages
06.03.12 21:38:00,000 kernel: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
06.03.12 21:38:00,000 kernel: zone leak detection enabled
06.03.12 21:38:00,000 kernel: standard timeslicing quantum is 10000 us
06.03.12 21:38:00,000 kernel: mig_table_max_displ = 73
06.03.12 21:38:00,000 kernel: TSC Deadline Timer supported and enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for TMSafetyNet
06.03.12 21:38:00,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Sandbox
06.03.12 21:38:00,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Quarantine
06.03.12 21:38:00,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
06.03.12 21:38:00,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
06.03.12 21:38:00,000 kernel: The Regents of the University of California. All rights reserved.
06.03.12 21:38:00,000 kernel: MAC Framework successfully initialized
06.03.12 21:38:00,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
06.03.12 21:38:00,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
06.03.12 21:38:00,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
06.03.12 21:38:00,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
06.03.12 21:38:00,000 kernel: [ PCI configuration begin ]
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 6689
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
06.03.12 21:38:00,000 kernel: console relocated to 0xf10010000
06.03.12 21:38:00,000 kernel: PCI configuration changed (bridge=16 device=5 cardbus=0)
06.03.12 21:38:00,000 kernel: [ PCI configuration end, bridges 12 devices 18 ]
06.03.12 21:38:00,000 kernel: mbinit: done [96 MB total pool size, (64/32) split]
06.03.12 21:38:00,000 kernel: Pthread support ABORTS when sync kernel primitives misused
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagementClient: ready
06.03.12 21:38:00,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffebc9f3e; max speed s800.
06.03.12 21:38:00,000 kernel: BTCOEXIST off
06.03.12 21:38:00,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
06.03.12 21:38:00,000 kernel: 5.100.98.75
06.03.12 21:38:00,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
06.03.12 21:38:00,000 kernel: rooting via boot-uuid from /chosen: C48C5E4E-3694-3F9E-87F9-351F848CEC3F
06.03.12 21:38:00,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
06.03.12 21:38:00,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
06.03.12 21:38:00,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Customer@2
06.03.12 21:38:00,000 kernel: BSD root: disk0s2, major 14, minor 2
06.03.12 21:38:00,000 kernel: Kernel is LP64
06.03.12 21:37:49,176 com.apple.launchd: *** launchd[1] has started up. ***
06.03.12 21:37:59,329 com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
06.03.12 21:38:04,363 com.apple.pfctl: No ALTQ support in kernel
06.03.12 21:38:04,363 com.apple.pfctl: ALTQ related functions disabled
06.03.12 21:38:04,389 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
06.03.12 21:38:05,090 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
06.03.12 21:38:05,092 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12039
06.03.12 21:38:05,092 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
06.03.12 21:38:05,265 UserEventAgent: CertsKeychainMonitor: configuring
06.03.12 21:38:06,000 kernel: Waiting for DSMOS...
06.03.12 21:38:06,000 kernel: BCM5701Enet: Ethernet address 40:6c:8f:00:09:d9
06.03.12 21:38:06,000 kernel: AirPort_Brcm4331: Ethernet address 68:a8:6d:4b:27:58
06.03.12 21:38:06,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
06.03.12 21:38:06,000 kernel: IO80211Interface::efiNVRAMPublished():
06.03.12 21:38:07,000 kernel: AGC: 3.0.16, HW version=1.9.23, flags:0, features:20600
06.03.12 21:38:07,000 kernel: Previous Shutdown Cause: 3
06.03.12 21:38:08,000 kernel: DSMOS has arrived
06.03.12 21:38:08,000 kernel: ** Device in slot: SLOT--1 **
06.03.12 21:38:08,869 com.apple.SecurityServer: Session 100000 created
06.03.12 21:38:09,849 mds: (Normal) FMW: FMW 0 0
06.03.12 21:38:10,000 kernel: macx_swapon SUCCESS
06.03.12 21:38:10,622 airportd: _processDLILEvent: en1 attached (down)
06.03.12 21:38:10,623 mDNSResponder: mDNSResponder mDNSResponder-320.14.0 (Nov 16 2011 01:16:56) starting OSXVers 11
06.03.12 21:38:10,641 com.apple.usbmuxd: usbmuxd-263 on Nov 14 2011 at 18:58:10, running 64 bit
06.03.12 21:38:10,000 kernel: Created virtif 0xffffff8014af6e00 p2p0
06.03.12 21:38:10,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:10,663 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:11,283 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
06.03.12 21:38:11,283 configd: DHCP en1: INIT-REBOOT transmit failed
06.03.12 21:38:11,304 configd: setting hostname to "Saschas-MacBook-Pro.local"
06.03.12 21:38:11,308 configd: network configuration changed.
06.03.12 21:38:13,000 kernel: en1: 802.11d country code set to 'DE'.
06.03.12 21:38:13,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
06.03.12 21:38:15,057 com.apple.SecurityServer: Entering service
06.03.12 21:38:15,080 systemkeychain: done file: /var/run/systemkeychaincheck.done
06.03.12 21:38:15,090 configd: network configuration changed.
06.03.12 21:38:15,091 configd: network configuration changed.
06.03.12 21:38:15,192 mDNSResponder: D2D_IPC: Loaded
06.03.12 21:38:15,192 mDNSResponder: D2DInitialize succeeded
06.03.12 21:38:15,217 UserEventAgent: ServermgrdRegistration cannot load config data
06.03.12 21:38:15,220 UserEventAgent: get_backup_share_points no AFP
06.03.12 21:38:15,000 kernel: MacAuthEvent en1 Auth result for: bc:05:43:a0:ff:1d MAC AUTH succeeded
06.03.12 21:38:15,000 kernel: wlEvent: en1 en1 Link UP
06.03.12 21:38:15,000 kernel: AirPort: Link Up on en1
06.03.12 21:38:15,000 kernel: en1: BSSID changed to bc:05:43:a0:ff:1d
06.03.12 21:38:15,000 kernel: AirPort: RSN handshake complete on en1
06.03.12 21:38:15,632 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
06.03.12 21:38:15,696 netbiosd: Unable to start NetBIOS name service:
06.03.12 21:38:17,000 kernel: AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
06.03.12 21:38:17,595 configd: network configuration changed.
06.03.12 21:38:17,596 ntpd: proto: precision = 1.000 usec
06.03.12 21:38:17,727 configd: setting hostname to "saschas-macbook-wlan.fritz.box"
06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
06.03.12 21:38:17,774 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Compound_Blank_10 because it is protected and not on the exception list
06.03.12 21:38:17,777 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
06.03.12 21:38:17,778 configd: network configuration changed.
06.03.12 21:38:17,891 loginwindow: Login Window Application Started
06.03.12 21:38:18,000 kernel: AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
06.03.12 21:38:22,191 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
06.03.12 21:38:22,719 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
06.03.12 21:38:22,894 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
06.03.12 21:38:22,948 com.apple.SecurityServer: Session 100005 created
06.03.12 21:38:22,950 loginwindow: Login Window Started Security Agent
06.03.12 21:38:23,023 SecurityAgent: Echo enabled
06.03.12 21:38:23,023 SecurityAgent: Echo enabled
06.03.12 21:38:23,702 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter setNeedsToUnmountDirVolumeAtLogout:] | mounter calling mechanism to setNeedsToUnmountDirVolumeAtLogout to 0
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | urlAttribute = null
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirPath did NOT follow a symlink, keeping original path of: /Users/Sascha
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirMajorType = 1
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | enter
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | Guest account check returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter setHomeDirType:] | setHomeDirType to 1
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism invoke] | mountHomeDirectoryForUser returns 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism updateAndUnlockKeychain] | updateAndUnlockKeychain
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism launchHomeDirFixerToolIfNeeded:] | launchHomeDirFixerToolIfNeeded called with 0
06.03.12 21:38:31,286 loginwindow: Login Window - Returned from Security Agent
06.03.12 21:38:31,308 loginwindow: USER_PROCESS: 37 console
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.AddressBook.PushNotification': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.safaridavclient.push': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.syncdefaultsd.push': unknown error code
06.03.12 21:38:31,379 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
06.03.12 21:38:31,486 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
06.03.12 21:38:31,676 com.apple.launchctl.Aqua: load: option requires an argument -- D
06.03.12 21:38:31,676 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
06.03.12 21:38:32,033 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 25095
06.03.12 21:38:33,566 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[131]) Exited with code: 1
06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.689 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.692 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:35,005 appleprofilepolicyd: appleprofilepolicyd: profiling drivers not loaded, loading
06.03.12 21:38:35,044 com.apple.launchd.peruser.501: (com.facebook.videochat.Sascha.updater[173]) Tried to setup shared memory more than once
06.03.12 21:38:35,671 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
06.03.12 21:38:35,673 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
06.03.12 21:38:35,673 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
06.03.12 21:38:36,318 com.apple.launchd.peruser.501: (*****-SharedServices[174]) Exited with code: 1
06.03.12 21:38:36,711 Firewall: java is listening from ::ffff:0.0.0.0:0 proto=6
06.03.12 21:38:49,925 coreservicesd: *** process 57 exceeded 500 log message per second limit - remaining messages this second discarded ***

Error messages or information for the invalidation of those procedures

Hello expert:
I have a few procedure invalidated . in principle , those procedures should be validated automatically when they are called somewhere. but they don't, that means there are some error blocking them validated. please where I can find out corresponding error messages or information for the invalidation of those procedures.
Many Thanks.

CREATE TABLE t
AS
   SELECT 1 id FROM DUAL;
CREATE OR REPLACE PROCEDURE my_procedure
AS
   v_id   t.id%TYPE;
BEGIN
   SELECT id INTO v_id FROM t;
END;
CREATE OR REPLACE PROCEDURE my_proc2
AS
BEGIN
   my_procedure;
END;
exec my_proc2;
DROP TABLE t;
ALTER PROCEDURE   dsamstrc.my_proc2
   COMPILE;
SELECT *
FROM SYS.USER_ERRORS
WHERE NAME = 'MY_PROC2'
       OR NAME IN (SELECT REFERENCED_NAME
                     FROM dba_dependencies
                    WHERE NAME = 'MY_PROC2');
NAME     TYPE     SEQUENCE     LINE     POSITION     TEXT     ATTRIBUTE     MESSAGE_NUMBER
MY_PROCEDURE     PROCEDURE     4     4     2     PL/SQL: SQL Statement ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     3     4     27     PL/SQL: ORA-00942: table or view does not exist     ERROR     0
MY_PROCEDURE     PROCEDURE     2     2     10     PL/SQL: Item ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     1     2     10     PLS-00201: identifier 'T.ID' must be declared     ERROR     201
MY_PROC2     PROCEDURE     2     3     5     PL/SQL: Statement ignored     ERROR     0
MY_PROC2     PROCEDURE     1     3     5     PLS-00905: object DSAMSTRC.MY_PROCEDURE is invalid     ERROR     905wonder if something like this would work if the dependencies were more than 2 deep.
SELECT distinct *
FROM SYS.USER_ERRORS
WHERE NAME in
       (SELECT name
        FROM dba_dependencies
connect by nocycle name = prior referenced_name
start with NAME = 'MY_PROC2')
order by name;Edited by: pollywog on Apr 4, 2011 2:49 PM

Caller 09 contains error messages in infopackage for master data

Similar Messages

Maybe you are looking for