Caller 09 contains error messages -RSM 78

Hi,
I am getting following errors while trying to do a initilisation (with data transfer) on Business Partner text.
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message. RSM 78
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I also chekced the job Log in the source system, it shows following:
ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Job cancelled
Please help!
Regards
Rakesh

Hi Rakesh
check if DS is active in R/3 side, replicate it , activate transfer rule/transformation and load data again.
Thanks
Tripple k

Similar Messages

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

Caller 09 error message in bi 7?

Hi all,
I am getting an error in the pc " caller 09 contains error message:, i ran the abap program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data source. but after i select the data source and ran the program i am still getting
There is no DataSource with these attributes
but there is a datasource in the system!!
Can anyone pls help me on this!!, and this error is on BI 7 system!!
Thanks
Pooja

Hi Hari,
For DS activation you can goto edit mode of DS & activate . It is not always necessary that you should run the program to activate the DS.
Also in which system you are running the program?
R/3 or BW system?? I hope since your source system is R/3, you will be activating it in R3 by running the program & in BW side, do it manually if you cant do it using the program.
Hope this should solve your problem.
Regards,
Pavan
Edited by: PavanRaj_S on Jul 5, 2010 2:27 PM

SHR1 - Call contained Errors

Hi,
I am getting error for SHR1 Transaction.
in SHR1 Transaction when i give Resource, and go for Generate Shift report i am getting this error.
Error Message is FPRUNX003 and call contained errors:ADS(2).
Can any one explain.
Thanks
Nag
Edited by: nag1975 on May 18, 2010 7:38 AM

Dear Nag,
transaction SHR1 need ADS as precondition. As SHR1 display the result in PDF the installation of ADS is necessary. If ADS is not implemented or not correctly implemented you get error "Error Message is FPRUNX003 and call contained errors:ADS(2)."
So please make sure adobe document services setup (ADS) is correct.
Regards
Sabine

VETS100A - Error - "Call contained error(s):ADS(2)

Hi,
When I executed the standard VETS report using VETS 100A form, I got the error "Call contained error: ADS(2)
Message No. FPRUNX003
When I executed it with VETS 100 form, it didn't display the job codes 00 and 01
Any help is much appreciated
Thanks

Hi,
Please check the OSS note 1372977.

Sony BRAVIA Call failed error message

I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??

Shorty wrote:
Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
Skype on my phone works better, with better video and sound quality. That's where I'm at.....
Maybe I'm on a downer tonight...

Call contained error(s): ADS (2)

Hi,
I have created a print form using transaction code SFP. while testing system giving me an error My form and interface showing active and no errors
<b>
Call contained error(s): ADS (2)
</b>
How to avoid this.
Sa_R

Hello,
are you sure that you have configured ADS on your J2EE engine?
Thank you for the information.
Best regards,
Dezso

Error Caller 09 contains error message - Data Marts loading(cube to ODS)

Dear all,
          Please ! Help me in this problem, This is very urgent.
          I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
         Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
          Error message from the source system
          Diagnosis
         An error occurred in the source system.
          System Response
         Caller 09 contains an error message.
         Further analysis:
         The error occurred in Extractor .
         Refer to the error message.
         Procedure
         How you remove the error depends on the error message.
         Note
         If the source system is a Client Workstation, then it is possible that the file that you wanted to                load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
              Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
         Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
         Thanks,
          Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AM

Hi Friends !
                  I didn't find any short dump for that in ST22.
                  Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows this messages :
                    Request still running
                    Diagnosis
                    No errors found. The current process has probably not finished yet.
                     System Response
                     The ALE inbox of BI is identical to the ALE outbox of the source system
                       or
                     the maximum wait time for this request has not yet been exceeded
                       or
                    the background job has not yet finished in the source system.
                   Current status
                   in the source system
                    And Details Tab shows following Messages :
                    Overall Status : Missing Messages or warnings
                    Requests (Messages) : Everything OK
                            Data Request arranged
                            Confirmed with : OK
                     Extraction(Messages) ; missing messages
                            Data request received
                            Data selection scheduled
                            Missing message : Number of Sent Records
                            Missing message : selection completed
                    Transfer (IDOCS and TRFC) : Everything OK
                            Info Idoc1 : Application Document Posted
                            Info Idoc2 : Application Document Posted
                     Processing (data packet) : No data
                    This Process runs for infinite time, then I have to kill that process from server, & Then It shows Caller 09 Error in Status Tab
                    Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
                    Please, give your suggestion as early as possible, I m ewaiting for your reply.
Thanks,
Pankaj N. Kude

Caller 09 contains error messages in infopackage for master data

Hello
we are facing issue in info package some records were available in psa and then we got the job cancelled at R3 side and the short dump attached screen shot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart

Hi,
Can you please check the extractor in RSA3.
Also try to find the record which is failing and fix the Profit Center for that record.
If you dont know exact error record, please take help from FICO guys.
Else do random loads like, if total no of records are 100
Load 50 records by giving selections. If it went fine, then go to next 50. Do loads in Binary search way.
Regards

Caller 09 contains error message in BI7

Hello Guru's,
We have a custom data source in r/3(full load) and we loaded full load last nigth to DSO and it is sucessfull.
Custom datasource is changed in r/3 today . so we replicated the datasource , activated Transformation , DSO , DTP, Deleted last nigth loaded request and try to load the data to PSA and we are getting following error message .
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
As it is common error we face in BI Implementation .
we followed these steps .
1) RFC Connection is checked and it is fine .
2) ST22 is checked and we couldn't see any error in R/3 side .
3) sm58 is checked and we couldn't see any IDOC'S in R/3 side .
4)Checked Extract checker RSA3 . we could see 10 records for that data source.
5) We thought it is Time stamp issue and we ran Program RS_TRANSTRU_ACTIVATE_ALL and activate the transfer rules and try to reload.( Not Sucessfull )
6) As above step doesn't make sence as we don't have Transfer rules for 7x datasource . we ran RSDS_DATASOURCE_ACTIVATE_ALL program and activated datasource and try to load the data and we have same issue.
7)we are checked Background user Aleremote . It is not locked.
8)BI side we relplicated datasource , activated , created a new infopackage and try to load the data . still we have same issue.
finally we thought it to be issue is not on Bi side and is on R/3 side .
Please let us know how to solve this issue .
Thanks,
PK.

Hi PokerKing:
You're getting the error because the structure of the data loaded yesterday is different from the structure of the data loaded today.
Delete the data both on PSA and on the DSO an reload.
Regards,
Francisco Milán.

The error occurred in Extractor Caller 09 Error message

Hi All,
I am trying to load the data from CRM to BI. While extracting i am getting error. It is throwing error in PSA itself.
Please help on this issue.
Error Message in RSMO.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Check Load from InfoSource 0CRM_SERVICE_PROCESS_H , Packet Info Package for 0CRM_SRV_PROCESS_H
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Note: If you not wish to receive any mails, maintain transaction RSMONMAIL.

Hi,
Just click right button on your source system and choose Transfer Global Setting. It should help. Please let me know the result.
Refer the below link,
http://www.sapfans.com/forums/viewtopic.php?f=12&t=308407&p=932153
Regards,
Ravindra.

IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational.

IPHONE 5: can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off. ATT went through the standard protocol - resetting network, resetting sim card, etc. No changes. Other phones working fine in same region with same carrier. Apple's solution is to restore software, but haven't gone there yet. Anyone successfully addressed this/these issues?

I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

Opening XLSX Files in change-Modus calls up Error message

Good Morning Community,
we are facing problems whenever we're trying to open Documents in our Business Blueprint Structure (SOLAR01) which are stored as document type XLSX.
The error message popping up reads as follows:
Windows cannot find 'C:\Users\SAPUSERNAME\AppData\Local\SAP\SAPGUI\tmp\001E0B76A9901ED0BAE62769F63D9E0A\OLY-SD-document types.xlsx' Make sure you typed the name correctly and then try again.
Funnily the error message has no consequence, the document still opens in Excel (2003, which we have in use in our company, whilst the original file, created by our external consultants, is in Office 2010 format), but we would like to get rid of that message. I already tried the solution suggested in Office 2007 Document Attaching in Solution Manager , but to no avail.
Does anyone else have similar difficulties and probably already found a solution? And no, upgrading to Office 2010 is out of scope
Thanks in advance,
Regards
Sabine

Hello Sabine,
It looks like there is a problem with your SAP GUI installation on the client.
Did you check this already?
During our project for the Office2010 upgrade I have checked all combinations of different installations:
Office2003 on a WinXP-32-client and on a WinXP-64 client
Office2010 on a WinXP-32-client and on a WinXP-64 client
SolMan documents in Office2003 format
SolMan documents in Office2010 format
All run well if SAPGUI release 720 has been correctly installed on the clients. Older versions don't work!
You find more information for SAPGUI 720 in the sapnotes 1393114 and 66971.
But I recommend to install Office2010 because there is some more trouble in SolMan functionality caused by Office2010 documents and using Office2003, e.g. generating the test report. Therefore we don't use 2010-files until all clients have upgraded to Office2010.
Hope this is the information you need!
Best regards,
Adelbert

Sometime fail to call servlet ERROR message: java.io.FileNotFoundException: Response: '500: Internal Server Error' for url:.

          Error:
          java.io.FileNotFoundException: Response: '500: Internal Server Error' for url:
          'http://www.xxxx.com//myServlet/anyfile.exml'
          at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:380)
          The URL is correct.
          When it fails, on IE browser, receive the following message,
          ·     The RPC server is unavailable
          ·     The remote procedure call failed.
          Servlet receives xml and set it into session.
          This class set or get session.
          Servlet is called many times.
          Using weblogic 8.1


          Error:
          java.io.FileNotFoundException: Response: '500: Internal Server Error' for url:
          'http://www.xxxx.com//myServlet/anyfile.exml'
          at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:380)
          The URL is correct.
          When it fails, on IE browser, receive the following message,
          ·     The RPC server is unavailable
          ·     The remote procedure call failed.
          Servlet receives xml and set it into session.
          This class set or get session.
          Servlet is called many times.
          Using weblogic 8.1

E65 Call Divert Error Message - Need Help

Hello,
I’ve been trying to divert all voice calls to my voicemail but the phone keeps giving me this message “Invalid Phone Number”.
My service operator has *555 as voicemail number…
Any suggestions?
Thanks again!
Martin

Try either fixing permissions or removing the user cache using Onyx or Applejack.

Caller 09 contains error messages -RSM 78

Similar Messages

Maybe you are looking for