"caller 70" is missing

My Int data load for a BW stat cube got failed with error 'caller 70' is missing. This is a production issues. I checked my ST22 and got the following details;
Runtime Errors         DBIF_RSQL_INTERNAL_ERROR
Internal error when accessing a table.
DBIF_RSQL_INTERNAL_ERROR" C
SAPLSDCL " or "LSDCLU56 "
PHIOS_GET_REQU_HEADER_PROPS"
Client................ 100
User.................. "PUBLIC"
Language key....... ..."E"
Transaction............" "
Program............... "SAPLSDCL "
Screen.............. .."SAPMHTTP 0010
Row in Screen..........2
I checked the OSS note 828516 the error is same but the program is different in the OSS note.
Does anyone have this situation! Do you think it would solve the problems If I scheduled the job with PSA and update to targets!.. I had set the runtime for 6 hrs in the Infopackage itself.because I got runtime error 'time out' in my first load. Help me here.

Hi Nitik,
How did u solved the Problem, If U can, Provide the information
That will be very usefull........
Thanks in advance
Badri

Similar Messages

Error Caller 70" is missing while loading master data

Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
Sandhya

Hi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps

My FaceTime icon in dock is not showing when and how many calls I have missed (similar to the email system where it shows how many emails (on the stamp icon) have been received

My Face Time icon in dock does not show how many calls I have missed. It should show the number similar to the email system(a red number appears on the stamp icon). How can I rectify this problem?

Hey michelefromuk,
Thanks for using Apple Support Communities.
Mac Basics: Notifications keep you informed
http://support.apple.com/kb/ht5362
Check or uncheck "Badge app icon" option to show badges on the icon of the app in the Dock.
Have a nice day,
Mario

Caller 70 is missing time out (short dump)

when I was trying to load transaction data into cube , it was failed
the error message was :
short dump : caller 70 is missing
I checked in st22 , it shows that <b>time out</b> .
when check in r/3 side , extraction was over and job was finished.
data is coming upto PSA & is not updating into data target and geting failed after some time.
can any one give me suggestion.
thanks in advance
Ram

Hi Ram.
We were getting the same message. SAP recently published note 631668. It suggests dropping the InfoCube indexes before the load and then rebuilding them afterwards.
I set our system up to do that last night. We didn't get the error last night, but a single set of loads is not enough to make me say that it works. But it might be worth trying in your case.
Regards,
Adam

Add prefix 9 for incoming calling number of missed call only.

Dear,
I am wondering how to add the prefix 9 to incoming calling number of missed calls only, not the calling alerting number on the phone screen. For example, the local user 472 2001 calls our DID 482 3001 along with the calling number 472 2001 on the dialed phone screen, if I missed this call, in the directory missed call I can see 94722001.
I know I can add the prefix in the field incoming called party subscriber prefix on the gateway page, but when I do this, all of the calling number information show 9.
Thanks,
Kirin

If I understand you correctly, you would like to only change the missed calls/placed calls on your phones without changing the digits?
If you have an PRI, you can use this translation rule to change calling ID only on inbound calls:
Translation pattern to modify Caller ID to add a 9
voice translation-rule 1
Rule # /match/ /set/
(^.= Match anything begining with any number)(*= one or more digits) tranlasate to (9& = Take whatever is in the match phase and plug it in here)
rule 1 /^.*/ /9&/ type subscriber subscriber (subscriber = ton(Ton=Type of number) value local area)
rule 2 /^.*/ /91&/ type national national (national = ton value long distance area)
rule 3 /^.*/ /9011&/ type international international (international = ton value international area)
Config t
voice translation-rule 1
rule 1 /^.*/ /9&/ type subscriber subscriber
rule 2 /^.*/ /91&/ type national national
rule 3 /^.*/ /9011&/ type international international
voice translation-profile INBOUND_PSTN
translate calling 1
voice-port X/X/X
translation-profile incoming INBOUND_PSTN
Let me know if this helps.
John

How to disable "slide to call" feature for missed calls from lock screen on ios7

I realized that when the iphone (running iOS7) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode).
it is nice feature for people who don't care about locking their phone.but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through.
This is a serious security issue.it should be user configurable.
Hope Apple will take it seriously and release a update for the same.

You can provide feedback to Apple here: http://www.apple.com/feedback/iphone.html

Option to disable the "slide to call" feature for missed calls from lock screen

I realized that when the iphone (running iOS5) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode). This may allow malicious and unwanted calls to be made from a locked phone by anyone having access to the phone and defeats the purpose of having the phone locked by a passcode.
Don't get me wrong, it is nice feature for people who don't care about locking their phone, but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through.
At this point the only option that I see is to disable the phone related notifications from lock screen, which prevents all phone related notifications to be displayed on lock screen (missed or voicemail). This is not a desired solution.....
This is the first time in the history of iOSes, that a user can make outgoing calls from a locked phone with a passcode. Even the voice commands (for dialling a number) have option to be disabled on locked screen.
I was wondering if anybody else feels the same way about this? or have a solution?

I share the same feeling with you about this issue.
Actually I was very surprised when I discovered that!
In addition to this, when you actually slide a missed call, it calls the person and when you end the call, the notification of the missed call is still present! So that person can be called again and again and again.
This is a serious issue that Apple has overlooked!
Please secure the iOS 5.
Thanks.

Is it possible that the home button can show a light when a message or a phone call has beebn missed?!

Is it possible that the home button can show a light when a message or a phone call has beebn missed?!

No.
There is no light there.

Why is my Iphone 5 NOT ringing if somebody call me and Missing Ringtones ?

Why is my Iphone 5 NOT ringing of somebody call me and missing ringtones ?

Hello there, Thuy Loan.
The following Knowledge Base article offers some basics to review for the issue you're describing:
iPhone: No ring or sound from built-in speaker
http://support.apple.com/kb/TS1205
and
Phone - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Phone#TI9
Additionally you can check your Do Not Disturb settings using this article:
iOS: Using Do Not Disturb
http://support.apple.com/kb/HT5463
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

If I have my i5 on do not disturb, will my calls show as missed?

If I have my i5 on " do not disturb" will my calls show as missed?

Yes, they will.

My iPhone won't redial calls on the missed call list, why?

My iPhone won't redial missed phone calls from the missed call list, why?

Typically the way the sync you're trying to achieve is performed is to do the following on both your iPhone and iPad (assuming they have the same Apple ID):
Go to Settings > iTunes & App Stores and turn on "Books".
From that time on, books purchased on one device (then or later) will appear on the other.

How do I disable Who Called Feature since Missed Call has the same information?

I would like to disable the Who Called or the Missed Call option in my log files as they report the same information. Can anyone help?
Thank you.
Remi
Solved!
Go to Solution.

Remi, press the green dial key to open your Call Log > Menu > Options > Call Loggin and check NONE or whatever other option you desire. SAVE.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds like there is an incoming call which does not show up in either call waiting or missed calls.

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds as if there is an incoming call but it does not show up in call waiting or in missed calls. When I went to check on line, the fix involved a screen that I did not even have on my phone. Anyone else have this problem and is there a solution? I can't seem to get tech support at Verizon. Boo.

Hi Debsy1,
Thanks for the additional details! Let's get this issue resolved. What software version is the device on? Please reset the Network Settings on the device. Go to settings>general>reset>reset network settings. Please Note: Audio alerts may also indicate delivery of incoming text messages or emails. The tone will vary based on the type of information being delivered to the device. Tones may also indicate low battery charge or inadequate signal strength. Keep me posted with results.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

RADIUS packet-id not incrementing, called-station-id missing

I am running v1.3.5.58 on an SG300-20. I am attempting to use a Network Access Control (NAC) solution, which involves a RADIUS proxy. It is getting confused by two odd behaviors of the SG300 when attempting EAP-PEAP-MSCHAPv2 authentication.
1. The SG300 does not properly increment the "Packet Identifier" bits as it progresses through the RADIUS negotiation. The packet identifier is always 0x00.
2. The SG300 does not properly set the "Called-Station-ID" Attribute-Value-Pair (AVP). Instead, it is left blank.
Although freeradius is able to find away around these problems, the NAC RADIUS proxy cannot. Have I done something in the config to cause this to happen (see below)? Is this a known bug? Does it have a workaround? Will our hero save defeat the villain and save the day? ;-)
config-file-header
ausoff-sw-test1
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode switch
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
spanning-tree priority 40960
port jumbo-frame
vlan database
vlan 2-3,12,14,16,99,600,1000,1010
exit
voice vlan id 1010
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
dot1x system-auth-control
dot1x traps authentication failure 802.1x
dot1x traps authentication success 802.1x
hostname ausoff-sw-test1
line console
exec-timeout 30
exit
line ssh
exec-timeout 30
exit
line telnet
exec-timeout 30
exit
encrypted radius-server key C1TbrSasKDSDdUoOG2XrohFMsM5tVmu+3QyTwkiVKMI=
encrypted radius-server host 172.18.14.114 key C1TbrSasKDSDdUoOG2XrohFMsM5tVmu+3QyTwkiVKMI= priority 1 usage dot1.x
radius-server host 172.18.58.58 usage dot1.x
radius-server timeout 10
logging host 172.18.58.50
aaa accounting dot1x start-stop group radius
enable password level 15 encrypted
username nac password encrypted *** privilege 15
username admin password encrypted *** privilege 15
username cisco password encrypted *** privilege 15
username readonly password encrypted ***
ip ssh server
ip ssh password-auth
snmp-server server
snmp-server engineID local 800000090308cc68423f4d
snmp-server location "***"
snmp-server contact "***"
snmp-server community *** rw 172.18.58.58 view DefaultSuper
snmp-server community *** rw 172.18.14.105 view DefaultSuper
snmp-server host 172.18.58.58 traps version 2c nac
snmp-server host 172.18.58.58 version 3 auth nac
snmp-server group nac v3 auth notify DefaultSuper read DefaultSuper write DefaultSuper
snmp-server group SNMPSuperuser v3 auth notify DefaultSuper read DefaultSuper write DefaultSuper
encrypted snmp-server user nac nac v3 auth sha ***
encrypted snmp-server user ManageEngines SNMPSuperuser v3 auth sha ***
ip http timeout-policy 1800
clock timezone " " -6
sntp anycast client enable ipv4
sntp broadcast client enable ipv4
clock source sntp
sntp unicast client enable
sntp unicast client poll
sntp server 0.pool.ntp.org poll
sntp server 1.pool.ntp.org poll
ip domain name blah.net
ip name-server 172.18.19.232
ip domain timeout 2
ip domain retry 1
ip telnet server
interface vlan 2
name NACRegistration
interface vlan 3
name NACIsolation
interface vlan 12
name Users
interface vlan 14
name Dev
interface vlan 16
name LAN
interface vlan 99
name Mgmt
ip address 172.18.58.61 255.255.255.128
interface vlan 600
name "Core Test"
dot1x guest-vlan
interface vlan 1000
name Guest
interface vlan 1010
name Voice
interface gigabitethernet1
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet2
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet3
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet4
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet5
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet6
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet7
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet8
dot1x host-mode multi-sessions
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 600
interface gigabitethernet9
dot1x host-mode single-host
dot1x violation-mode protect trap 10
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet10
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet11
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet12
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet13
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet14
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet15
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet16
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet17
dot1x host-mode multi-sessions
no snmp trap link-status
port monitor GigabitEthernet 20
spanning-tree disable
spanning-tree bpduguard enable
switchport mode general
switchport general acceptable-frame-type untagged-only
switchport forbidden default-vlan
interface gigabitethernet18
dot1x host-mode multi-sessions
dot1x guest-vlan enable
dot1x radius-attributes vlan static
dot1x port-control auto
spanning-tree disable
spanning-tree bpduguard enable
switchport mode access
interface gigabitethernet19
switchport trunk native vlan 600
interface gigabitethernet20
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 2-3,12,14,16,99,600,1000,1010
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
exit
ip default-gateway 172.18.58.1

Thank you for your response, Tom. I have performed packet captures associated with this issue, and they show that the Called-Station-ID AVP is not sent with the RADIUS packets, from the SG300. There is not an issue with capitalization, the value is simply not provided at all. Here is an example of a tcpdump decode of such a packet. Please note the missing attribute:
15:48:01.843296 IP (tos 0x0, ttl 64, id 59875, offset 0, flags [none], proto UDP (17), length 142)
    172.18.58.61.49205 > 172.18.58.58.1812: [udp sum ok] RADIUS, length: 114
        Access Request (1), id: 0x00, Authenticator: 390000003f2000009e3f0000eb670000
          NAS IP Address Attribute (4), length: 6, Value: 172.18.58.61
            0x0000: ac12 3a3d
          NAS Port Type Attribute (61), length: 6, Value: Ethernet
            0x0000: 0000 000f
          NAS Port Attribute (5), length: 6, Value: 57
            0x0000: 0000 0039
          Username Attribute (1), length: 12, Value: SSO\dalewl
            0x0000: 5353 4f5c 6461 6c65 776c
          Accounting Session ID Attribute (44), length: 10, Value: 050000DF
            0x0000: 3035 3030 3030 4446
          Calling Station Attribute (31), length: 19, Value: E0-DB-55-B3-1D-5C
            0x0000: 4530 2d44 422d 3535 2d42 332d 3144 2d35
            0x0010: 43
          EAP Message Attribute (79), length: 17, Value: ..
            0x0000: 0201 000f 0153 534f 5c64 616c 6577 6c
          Message Authentication Attribute (80), length: 18, Value: ......R..1...EU.
            0x0000: bed3 b19e c70f 52e0 ec31 afcb d545 55ad

I want to see the calls received, dialed, missed separately

I have iphone4, I want to see the dialed , received, missed calls separetely, similar for messages, i want to see it as a list with received and sent seperately. there is no option in settings to do this, which is a normal feature for all phones

Yes, there is no option for that like on normal phones, maybe iphone not a normal phone.
You can give feedback to apple at http://www.apple.com/feedback
Maybe in a future OS update they might incorporate your feedback.

"caller 70" is missing

Similar Messages

Maybe you are looking for