Caller Can't Hear Me

For some reason, I can receive a call and get in just enough time to say Hello before the caller can't hear me at all. It doesn't drop the call, simply silences me. I have never had this problem and haven't dropped my phone on anything hard. My firmware and iTunes are up-to-date. I have no idea what's wrong with it.
Has anyone else had this problem? What can I do to resolve the issue?

I had the same issue. It was not being muted by my face (although sometimes that would happen). For me you could actually tap on the back of the phone and get it to work...but only for a short period of time.
I went through all the normal trouble shooting items... rebooting... restoring...etc. At the end of the day I took it into Apple store. They said they've had other people with the same issue and the best bet is to replace the phone while it's still under warranty. You have one year from purchase date unless you bought the extended Applecare.
I wouldn't bother with too much more trouble shooting...not since this is a known issue that others have had happen.

Similar Messages

  • What are the setting in order to use headset with vontage softphone, caller can't hear me

    have dv7 entertainment notebook with IDT audio. When I use vontage softphone caller can not hear me but I can hear them. Is there some default setting for the notebook that I am missing or is it a vontage issue?
    windows 7
    HP Pavilion dv7 Notebook PC
    Intel i5
    64 bit os

    I had the same issue. It was not being muted by my face (although sometimes that would happen). For me you could actually tap on the back of the phone and get it to work...but only for a short period of time.
    I went through all the normal trouble shooting items... rebooting... restoring...etc. At the end of the day I took it into Apple store. They said they've had other people with the same issue and the best bet is to replace the phone while it's still under warranty. You have one year from purchase date unless you bought the extended Applecare.
    I wouldn't bother with too much more trouble shooting...not since this is a known issue that others have had happen.

  • My I ip4 can't hear the caller or Caller can't hear me

    I can't hear hear the caller or caller can't hear me

    try turning it off
    of didn't work restart it by holding sleep/wake up button for 15 scds, evade the slider,u will see the apple logo..
    if did not work all of 2 solutions take it to an apple store to replace it wi th a new

  • TS3367 can't turn off mute on face time; caller can't hear me

    can't turn off mute on face time; caller can't hear me.....

    see if this link helps http://support.apple.com/kb/TS2802

  • My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    HI there,
    Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
    http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
    If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
    Hope this helps
    Scott

  • When I use FaceTime on iPhone 5 people I call can not hear me.

    When I use FaceTime on iPhone 5 people I call can not hear me.  Anyone can help me?

    The lower mic is faulty, either due to logic board fault or lower mic itself fault. If lower mic itself, the replacement part is iPhone charging port assembly with flex cable, lower mic, and home button flex connector all a less than $10 single part. Apple handles this problem with replacement iPhone 4S for $199, make Genius reservation to avoid long wait time. The reason the speakphone still works is because it uses the upper mic, which is at the small pin hole at top of iPhone next to headphone jack port.

  • When placing call can not hear ringer in earpeice

    When placing phone call,can not hear phone ringing in earpeice,speakerphone works ok when turned on ,then turning off speaker phone phone works ok

    I am having the same problem with my iPhone 4s with iOS 5.0.1.
    Symptoms: I dial the number and the phone's display shows "calling ..." and the red "End" button, but I cannot hear an outgoing ringer.
    I was under the impression that the phone on the other end (that I was calling) was not ringing either, but that is not the case.  The phone on the receiving end rings.  I cannot hear the person I'm calling (or his/her answering machine) if he/she/it picks up.
    My carrier is AT&T, but others in my office with the same phone/carrier have not experienced this problem.

  • Iphone4s caller can not hear me!

    When making or receiving a call on my iphone 4s the caller can not hear me its either very faint or they can not hear me at all.  I have checked all volumes on my phone but have no idea what it could be. Any suggestions?

    Erase iPhone, set up as a new device.
    If the issue persists, go get a replacement device.
    Had the same issue on my iPhone 4 two years ago- had to have it replaced.

  • IPhone 4-Caller can't hear my voice. Checked the mute button and had restart the phone. Still problem occurred. HELP ME PLS!

    iPhone 4-Caller can't hear my voice. Checked the mute button and had restart the phone. Still problem occurred. HELP ME PLS!

    I'm having same problem with my 3G. When I adjust my ringer volume it says headphone in parentheses. I can still hear thru headphones. Until u get it fixed maybe u could try this as a temp solution. Good luck.

  • IPhone 4 with Att, 3g, I can receive calls but caller can't hear me. I tried reboot and remove sim card. Help!

    IPhone 4 with Att, 3g, I can receive calls but caller can't hear me. I tried reboot and remove sim card. Help!

    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • I just downloaded Windows 10 and now my headphone will not work, the other caller can't hear me.

    I just downloaded Windows 10 and now my headphones are not working and the other caller
    can not hear me.

    Please download and install the driver from the following weblink:
    http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • TS1630 When I get a call, the caller can't hear me help?

    Having probems with my iphone 4, when i get a call the caller can't hear me but i can hear them fine.
    Can anyone help with this problem?

    Have you tried a power off/on to see if that clears the problem?
    Did you try a reset, hold the sleep/power button and home button for at least ten seconds?
    If nothing is working to reset the phone, can you get to an Apple Retail store genius bar and have the staff take a look at it to see if something has failed?

  • IPhone 4: I can hear the caller but the caller can't hear me??

    It happens after a second or two on the phone the caller can't hear me but I can hear them fine. And sometimes they can hear me but my voice warped or crackly? then when I try to ring them back they can't hear me at all. Anyone else with the same problem???

    For me the problem occurs on outgoing calls.
    The person I am calling can not hear me. I hang up and call again and they can hear me.
    Issue occurs randomly approximately 1 out of every 4 calls.
    I'm using an iphone 3GS with IOS 4.3.3 installed using Optus network (Australia).
    When the issue occurs the person at the other end cannot hear anything no matter how loudly I yell into the microphone. I'm not accidentally putting the phone on mute because it is not indicated on the phone that I have and it does not matter whether I am using the microphone headset or not. I'm getting sick of having to apologise to my customers for my phone not working properly.
    I tried replacing my iphone 3GS with another iphone 3GS, restored it from my backup and using my original SIM card. Problem still occurs.
    Since replacing the iphone did not resolve the problem it must be related to IOS, SIM card or cell carrier.
    Anyone else experiencing the same issue?

  • Iphone 4 during a call can't hear or be heard. But I know both the speakers and the phone call mic work fine.

    I bought an iphone 4 and have been having multiple issues since the moment I got it. My biggest issue when I received it was that the noise cancellation mic didn't work. I sent it back to the people I bought it from to fix it and they fixed the other mic but not the noise cancellation mic. So I know that one doesn't work with apps, speaker phone, that sort of thing. I've been just dealing with it and using headphones with a mic on them.
    Well once I put my sim card in and had to go through a huge debacle with AT&T to do it, I got a phone call and I couldn't hear anyone and they couldn't hear me. I tried switching it to speaker phone and using my headphones and still nothing. I first tried factory reset and network reset and it didn't do anything. So I tried the fix where you put a piece of cardboard in the phone and the other fix where you loosen and then re-tighten the grounding screw. Now I can hear the other person but only on speaker phone, the call is choppy, but I can hear them so progress! They still couldn't hear me. However, when I took the call off of speaker phone it was back to dead silence. I tried putting in my headphones to see if they could hear me, they still could not hear me even with the headphone mic. I'm not sure what else I can do!! I know the speakers and mic work because I listen to music and play games and I hear those and when recording on voice memo the mic and playback work fine.I also know that it isn't any issue with signal because it happens where ever I am, low signal or all 5 bars! I guess I'll try cleaning them and try putting a thicker piece of cardboard but I don't expect those to work. If you can help with any suggestions at all please let me know! I have been having the worst luck with this phone and i'm getting absolutely fed up.

    Hey there RJOBoston,
    Take a look the article below, it provides troubleshooting tips that should resolve the issue you’re running into with not being able to hear or be heard on calls.
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    Cheers,
    -Jason

  • Caller Can't Hear Me - Anyone with this problem?

    I originally got my iPhone 3G last December 2008. It was working fine, though I noticed that after a couple of months, that it had a hairline crack near the headphone jack. Phone was still working, but I decided to bring it to the Apple Store here in Singapore (Singtel) last November 9, 2009. They replaced the phone right away with the note "Hairline Crack" on the receipt.
    After two weeks, I had a problem where I couldn't hear the person on the other line unless I used the headphones or put it on speaker mode. When you don't have the headphones plugged in and try to change the ringer volume, the phone will just display "Ringer (Headphones)". I tried plugging & unplugging the headphones, and even restoring, resetting, and it was still not working. One trick I found was that if I went to the Settings > Sound option, then try to change the volume of the ringer, it would work for a couple of calls where I can make a call without going on speaker mode or using my headphones. This was getting too troublesome.
    I went to the Apple Store (Singtel) again today, December 5, 2009, and they replaced the phone. Note on the receipt this time was: "Headphone Mode". Fine by me, as long as I don't have to come back again. I went back home, trusting that the replacement would be good. Guess what? Now I have a new problem! I can only make calls using the headphones! This time, I can make calls and hear perfectly, but the person in the other line can't hear me. Voice memo does not recognize any voice inputs. I have tried resetting, restoring, to no avail.
    Anyone having this problem? Any suggestions on what else to do?
    My patience is running out. Apple, don't disappoint me. I don't want workarounds or a badly refurbished product. I just want a working phone.

    I had the problem up until today.  There is a hardware problem with the iPhone internal microphone.  I went to the Apple store in Barcelona and they gave me a brand new iPhone.  I couldn't hear anything (except message tones, iPod music etc...) it was sooooo frustrating.
    Anyway, contact Apple, they'll happily provide you with a new iPhone!

Maybe you are looking for

  • WINDOWS XP DOESN'T RECOGNISE USB FOR IPOD NANO 2GB

    HELP! We recently bought 2 i pod nanos in Florida, returned to the UK where we set about connecting them to our pc - pc doesn't even recognise the USB cable, but does recognise a friend's nano which we have tried. We didn't get a cd with the ipods, c

  • JVM Java heap space Error || even with -Xms- and -Xmx commands

    hi all, i got a problem by allocating a very great boolean array. first of all, here is my testcode: public static void main(String[] args) {           boolean[] testfield = new boolean[70000000];                     while(true){           //NOP     

  • Trigger event for during subinventory transfer

    Hi I would like to have a hook or to trigger an event (like firing a concurrent program) when subinventory transfer is performed. Is this possible and how to do it?

  • Error occurred when saving user preferences

    Hi, we Copy catalog and RPD to production Environment. when i am try to change the my account(Weblogic) setting getting bellow error. Exception occurred when saving user preferences to the catalog access denied for user to path /users/weblogic/_prefs

  • Problems securing WSRP portlet with Java keystore

    Hi. I am following the tutorial in the webcenter developer guide to secure my WSRP (jsr-168) portlet using WS-security. I have set-up my Java keystore for the producer and consumer with a trial CA certificate from verisign. The producer.jks looks lik