Caller display work with double adapter?

Following our alarm installation, we need to have it connected to the phone line to alert us if it is triggered whilst out.
Since using a double adapter/splitter, our caller display no longer works.
Is there any way to have both the house alarm and phone connected to the phone line and have the caller display work?
Any assistance is appreciated.

The belt and braces way of doing this is to contact 150 and get an engineer out to put an alarm block on the line.  This is generally just a small box and allows you to hardwire the alarm onto the line before the NTE5.
With splitters, I think it is a case of trial and error to find one that doesn't affect the Caller ID tone. 
Is the splitter plugged into a microfilter?  It could be the microfilter is stopping to caller ID tone and this needs to be replaced.

Similar Messages

  • Will the Cinema Display work with an older MacBook Air?

    My wife has an older MacBook Air (circa late 2009) with one USB 2.0 port and one Mini Display port. Will the Cinema display work with this model Air?

    It looks to me like the cinema display is a DVI connection.  If  you have a MiniDisplay port to DVI adapter that connected the MBpro to the display then you have everything you need.  (plus a DVI cable).   The MDP adapter plugs into the Thunderbolt port of the MBair.

  • Exception while working with Tibco adapter for Tuxedo!!

    Dear friends,:-)
    Greetings!
    I am facing an exception while working with "Tuxedo Adapter".
    I have installed TIBCO Adapter for Tuxedo on my machine which has both bea_Client and Server. I am trying to do a PurchaseOrder POC, which is already given in our TIBCO Adapter directory (C:\TIBCO\adapter\adtuxedo\5.3\examples\AgentBased\PurchaseOrder).
    The scenario goes like this, a request is sent from the Tuxedo client called clt, which invokes the Tuxedo service, which in turn sends a request to the adapter (“PublicationService”) through the adapter agent, and then the adapter publishes the data to the TIBCO environment. TIBCO BW receives the data using “Adapter Subscriber” and writes them to an XML output file named Get_output.xml.
    Problem in starting the Adapter - :(
    When I tried to RUN the make.bat which is placed at the “C:\TIBCO\adapter\adtuxedo\5.3\examples\AgentBased\PurchaseOrder” folder, it throws me the error.
    At the time of executing this script, “buildclient -o clt -f client.c”, it says that I don’t have a valid “TUXEDO SDK LICENSE”. The thrown exception is, "TUXNT_CAT:101: ERROR: You do not have a valid TUXEDO SDK license".
    Please tell me, is license Required to run the tux_client?
    also,please clarify, while configuring “tibco.env.WSNADDR”(i.e., Workstation Address of the Tuxedo server to connect to) I have given my machine IP ADDRESS with a unique port. i.e., //10.103.18.120:4020. I am not sure with this step. Please advice me!
    It would be great if you could please solve this issue.
    Thanks in Advance,
    Best Regards,
    Venkatesh Rajendran.

    Hi Venkatesh,
    Please see comments in line.
    Wayne
    <venkatesh rajendran> wrote in message news:[email protected]...
    Dear Wayne,
    Thanks a ton for your reply.
    Please clarify,
    buildclient is a Tuxedo command which is used to generate the Tuxedo client
    application. It needs Tuxedo SDK license, so you need to make sure the
    license is installed properly.
    Can you please let me know from where i can get the License? Can we download
    it online?
    [W] BEA provide a trial license in the product donwload site, but I am not
    sure Tuxedo 8.0 is provide or not. If you or your customer has Tuxedo
    installation, the license should alread be ready. It is located at
    $TUXDIR/udataobj/lic.txt.
    Running tuxedo client does not require SDK license.
    I am not sure how to start it. I am actually running the BAT file which has
    the following scripts,
    set TUXDIR=C:\bea\tuxedo8.0
    set WSNADDR=//10.103.18.120:4020
    set TUX_ADAPTER_HOME=C:\TIBCO\adapter\adtuxedo\5.3
    set TIBCO_RV_HOME=C:\TIBCO\TIBRV
    set APPDIR=%TUX_ADAPTER_HOME%\examples\AgentBased\PurchaseOrder
    set
    PATH=%TUXDIR%\bin;%APPDIR%;%PATH%;%TUX_ADAPTER_HOME%\hotfix\lib;%TUX_ADAPTER_HOME%\lib;%TIBCO_RV_HOME%/bin
    set TUXCONFIG=%APPDIR%\tuxconfig
    set ULOGPFX=%APPDIR%\ulog
    buildclient -o clt -f client.c
    buildserver -o server -f server.c -s POINFO -l
    %TUX_ADAPTER_HOME%\lib\agent.lib
    tmloadcf -y ubbagent
    tmboot ¨Cy
    Up to my knowledge, I hope TIBCO TUXEDO
    (ie.,TIB_adtuxedo-simple_5.3.0_w32_tuxedo80) acts as a TUXEDO_Server which
    receives the Request from TUX_BEA Client(Ex: C:\bea\tuxedo8.0).
    Or, does Tuxedo have a seperate Server installed on the machine other than
    TIBCO? please clarify.
    [W] I don't know the detail about TIBCO Tuxedo adaptor. Following
    clarifications for your reference,
    1. Tuxedo is an application infrastructure with framework for server and
    client. buildclient is used to generate the client binary and buildserver is
    used for application server linkage.
    2. I guess the TIBCO Tuxedo adaptor is a Tuxedo application client(or
    server?) which acts as a proxy process between TIBCO system and Tuxedo
    applications. So it receives request from TIBCO system and transform the
    requet to native Tuxedo data buffers and make the Tuxedo calls, then relay
    the reply back. So first you have to figure out the exact working model of
    it and check your Tuxedo applications.
    Your reply would be appreciated!
    Thanks a ton in Advance!
    Best Regards,
    Venkatesh Rajendran.

  • IPhone 4S doesn't work with car adapter

    My wife and I upgraded our 3GS phones to 4S.  We have an aftermarket iPhone adapter in our car, I don't recall the brand, but it worked fine with our Toyota Camry sound system.  We could charge our phones and play music using the factory stock CD transport controls with the adapter.  When we plugged in the 3GS phones, we would get a message "This accessory is not optimized for iPhone..." but once the message was dismissed it worked fine, even with iOS5.  Howwever, my 4S phone does not work with the adapter.  When I plug it in it charges, but I don't get the error message and the music function does not work at all.  Strangely, my wife's 4S works fine.  The only difference is that hers is 16 GB and mine is 32 GB.  I tried removing apps and hard re-starting, to no avail.  Is it possible that the hardware connector on my phone is defective and the contacts for music playback aren't functional?  Any other suggestions?

    To update my original post, I discovered that my 4S does work with my JVC car radio when I use the Apple USB cable that I use to sync with my PC. This happens to be the cable that came with my 3GS, but it works fine to sync the 4S. I don't know whether the short non-Apple cable I had in the car is broken, or whether something about the iPhone has changed to make it obsolete. In any case, I'm back in business!

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

  • AS2 software to work with AS2 adapter of B2B Toolkit 1.0

    Hi Team,
    I am doing scenario on AS2 adapter of B2B ToolKit 1.0 to work with AS2 adapter i need AS2 software and i am thinking to use mendelson AS2 server to work with it does it support it or should i use another AS2 software please suggest me.
    Regards,
    Avinash

    Hi Avinash,
        you have this blog, Easy-to-use AS2 software - part I Easy-to-use AS2 software - part I
    You can find the part 2 and 3 of it. All the info has been explained very good.
    Best regards, i hope it helps you.

  • Why is the fb video call doesnt work with macbook?

    why is the fb video call doesnt work with macbook?

    Hi
    Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
    Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
    The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
    Hope this helps.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...
    Attachments:
    Polymorph.zip ‏14 KB

  • File Protocol does not work with double slash ...PLEASE HELP

    Hi ALL
    POSTING THIS AGAIN....Please have alook
    I am using j2sdk 1.4.2 . In 1.4.1 version File protocol was working with double slash
    But Now in 1.4.2 version I have to use /// slashes to make it work...
    Can anyone shed any light on this. Has Sun changed something ?
    I searched the release notes but could not find anything useful.....
    Please comment .
    Thanks

    The problem is that it leads to maintenance problems
    for our products
    future releases and I need to find a good solution to
    this problemRead the spec for file URLs, fix your existing code to use it, and remember this lesson for next time.
    (Side note: I can't remember ever using or seeing double slases.)

  • FS10N Not display document with double click

    Hi, friends:
    Not display document with double click
    I am in the list of open items in transaction FS10N and when a wont to see a document by doing a double click in the line, instead of showing the document it shows the data of the line.
    Does anybody know the reason behind it? How can I resolve it?
    Thanks in advance.

    Hello,
    There could be two reasons:
    1. The account would not have been maintained with line item display.
    2. In case if the account has been created with line item display, then still you are not able to get the drill down (meaning that you are able to get the line items in FBL3N), in that case, immediately once you get the error, go to transaction code SU53. It will tell you the authorizations you are missing. You can forward that screen shot to your authorization team and they will give your proper authorization for drill down.
    Thanks,
    Ravi

  • What display works with Mac Pro 2012

    Will the new Thunderbolt display work with my Mac Pro (2012)?

    Actually, the 27 LED Cinema does re-appear in the Apple refurbished store from time/time. Use refurbme to be notified.
    http://store.apple.com/us/product/FC007LL/A
    http://www.refurb.me/us/

  • Working with double

    Hello !
    I'm working with double... doing substraction.
    I'm using a JNI Timer class to get the current time with a better precision that the milliseconds for currentTimeMillis(), to calculate some average time passed in code.
    My problem: for example, the operation :
    1.123456789 - 1.123456777
    does not return 0.000000012, but something like 1.2 for example...
    Is this normal ?
    How to get the real value without rounded ?
    Thanks
    Ludovic

    How to get the real value without rounded ?Usually, the double precision is sufficient. But try this..
    System.out.println(String.valueOf(1.123456789-1.123456777));//for reference
    java.math.BigDecimal big1 = new java.math.BigDecimal("1.123456789");
    java.math.BigDecimal big2 = new java.math.BigDecimal("1.123456777");
    java.math.BigDecimal big3 = big1.subtract(big2);
    System.out.println(String.valueOf(big3));

  • Will my Cinema HD Display work with a new Mac Pro Quad Core?

    Will my Cinema HD Display work with a new Mac Pro Quad Core?

    Yes.
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    https://support.apple.com/kb/HT5219
    https://www.apple.com/thunderbolt/
    http://support.apple.com/kb/HT5299

  • HP Compaq NC8430 is not working on ANY battery, but works with AC adapter

    I have bought an used HP Compaq NC 8430.
    The computer fails to power on with its battery. But it's working with AC adapter.
    I blamed a bad battery but it cannot be that.
    I have switched the battery with a same model's one, which is 100% working.
    But the computer is not power on with the other battery. I have tried 2 more compatible batteries, still not working at all. Only working when connected with AC adapter. The yellow led lights, indicating the battery is being charged. But when unplugged from adapter, the PC is switching off instantly.
    It CANNOT be the battery, as all the batteries worked on a friend's NC8430 PC.
    It should be some kind of hardware fail?
    I have tried to flash the BIOS, to clean the battery contacts, to remove the battery drivers in the control panel... nothing worked.
    The HP battery check gives "No battery"
    Please, help

    "No battery" sounds more like a hardware issue (battery connector), i would suggest you to contact hp tech support (http://www8.hp.com/us/en/contact-hp/phone-assist.h​tml) on the same.

  • Click to call not working with Firefox 31 in Windo...

    Hello All,
    I have a problem with Click to Call in my new computer.
    Windows 8.1
    Skype 6.20.0.104
    Click to call 7.3.16540.9015
    Firefox 31
    Click to Call not working with Firefox.
    With IE11 it ok.
    When I directly copy the URL "skype:+48xxxxxxxxx?call"  into address field of my Firefox, then automatically opening Skype with only 1 window- contacts, but not opened window with call phone, and not started to call.
    When I do this same in IE11 , Skype opened 2 windows ( contacts and call phone) and start call to phone number.
    I don't know why. because in my second computer ( this same Firefox, Skype, click to call) but Windows 7, Click to Call working with Firefox.
    Please help me.
    Maybe someone have a solution ?
    Best Regards
    Jarek
    ps. Sorry for my english

    Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
    The Beta update channel receives an update twice a week.
    You need to install the current release to switch the update channel to release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

  • External Display only with VGA Adapter working

    Hello, I'm german so sorry for my bad english
    After updating to Leopard 10.5.2 and installation of the Leopard Graphic Update, my external Display isn't working with DVI anymore. If I plug it in, my desktop flashes and I also get the monitor information tab of my external Display (Name and Settings correct). But the Screen stays black as in power saving mode. If I use the DVI -> VGA Adapter, everything works fine...
    Could that Problem be realted to the new Updates?
    I've also checked every hint of that Forum (PRAM reset, deleting Preference Files, trying to boot with closed MBP, ...), nothing worked for me. The Problem also occurs in Bootcamp! The external Display is recognized fine, but will not display any image, only if I use the Adapter.

    According to Apple support, it is "expected behaviour" under Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
    This is despite:
    - the obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to a 27" cinema display
    - the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy)
    - the negative longer-term impact on the battery and other components from running the MBP hotter than it needs to be.  
    If you would like to have the previous behaviour restored, please consider lobbying Apple to change how Lion handles clamshell mode. Options available to Apple include changing Lion's expected behaviour or adding a user-selectable option within System Preferences.
    Feedback should be submitted here:
    http://www.apple.com/feedback/macosx.html

Maybe you are looking for