Caller-id config for ACS

Hi I need to know what the config is to use Caller-ID as authentication and Authorization. Can anyone help me out.

AFAIK, we cannot use the caller-ID for authentication and/or authorization. But we can use the caller-ID to filter/restrict/allow/deny access based on that information.
If you are using ACS for Windows/ACS SE you can go through following document on how you can use the NAR to accomplish that,
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a00801a8fd0.shtml
Here's one configuration example,
http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186a008029c47c.shtml
Regards,
Prem

Similar Messages

  • First RFC call failed, config not loaded. Check the System landscape configuration.

    Dear Experts,
    We are getting below error on portal while using the BEX query in BI system.
    Error:
    BEx Web Application
    Error: First RFC call failed, config not loaded. Check the System landscape configuration.
    Exception occurred while processing the current request; this exception cannot be handled by the application or framework
    Failed to process request; contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page
    We are sorry for the inconvenience.
    As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
    Kindly suggest me on this issue..
    Thanks,
    Bharath.

    Hi Bharath,
    Please go through the below SAP Note and let me know if this helps.
    1903392 - Error: First RFC call failed, config not loaded
    BR,
    Anurag

  • Working eMTA config for a Metaswitch for Cisco DPQ3925

    I need a working emta config for a DPQ3295 cable modem that will work with a Metaswitch AGC using NCS

    Thanks for the reply but it still doesn't work.  I have tried those commands a few times and I always get the same error...access violation.
    I am using TFTPserver for Mac.  My Server Status, Working path permissions and Parent folder permission are all green.
    I have tried it with a pre-made file and without a pre-made file and I get the same result.
    I can create and modify any files in my working directory.
    This the message in the log file...Mar 25 13:12:41 MacBook-Pro-Retina.local TftpServer[1295]: 10.4-style NSDateFormatter method called on a 10.0-style formatter, which doesn't work. Break on _NSDateFormatter_Log_New_Methods_On_Old_Formatters to debug. This message will only be logged once.
    I am not sure what that means, but I will research it after I post this.
    I have tried both the CLI and the GUI and neither will work.

  • Product catalog call structure config

    For each catalog there is a call structure defined in SAP SRM , My question is i have a Product catalog created in system with Logical system as XYZ SAPR/3 ( this is under subscreen techinical settings) ... after some days some budy changed it with different sap logical system how to track the change in call structure technical setting parameter. Is there any standard report to track the changes in product catalog call structure config.

    Hi
    A change to the logical system in catalog call structure would have to have an associated change request in the TMS, perhaps you can check there with the transport admin as to who changed the BBP_WS_VC cluster.
    Regards,
    Jason

  • A question about call manager traces for Sip phones.

    So today I create a sip based ip communicator and pressed the new call button and heard a dial tone.  I started typing my telephone number. Half way through, I heard  another secondary dial tone (which indicates mis-configured route pattern somewhere) . 
    However, When I look at the call manager logs, I do not actually see the digits that I was typing. With SCCP, I can see the keypad button press messages in the traces, but here, I cannot see the pressed buttons in my CUCM traces. Can anyone help with telling me how I can see button presses going to call manager .   All I can see are the logs  below which came up as soon as I got the dial tone and the final sip invite messages. I see nothing in-between. 
    |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.xx.4.xx on port 56714 index 31809 with 973 bytes:
    [6387070,NET]
    NOTIFY sip:[email protected] SIP/2.0
    Via: SIP/2.0/TCP 10.x.x.66:56714;branch=z9hG4bK00005b1e
    To: <sip:[email protected]>
    From: <sip:[email protected]>;tag=00ffb00bc50a00340000499f-00006ab4
    Call-ID: [email protected]
    Date: Sat, 14 Feb 2015 14:17:40 GMT
    CSeq: 19 NOTIFY
    Event: dialog
    Subscription-State: active
    Max-Forwards: 70
    Contact: <sip:[email protected]:56714;transport=TCP>
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
    Content-Length: 350
    Content-Type: application/dialog-info+xml
    Content-Disposition: session;handling=required
    <?xml version="1.0" encoding="UTF-8" ?>
    <dialog-info xmlns:call="urn:x-cisco:parmams:xml:ns:dialog-info:dialog:callinfo-dialog" version="18" state="partial" entity="sip:[email protected]">
    <dialog id="12" call-id="[email protected]" local-tag="00ffb00bc50a003300006390-00002d4f"><state>trying</state></dialog>
    </dialog-info>
    SIPStationD(12991) - processCommonDialogNotifyInd:   Did 12 Sending Notified SIPOffHook to new Cdfc

    Here is a more detailed explanation of how SIP calls notify cucm when they go off hook to make a call. The digit dialled here is 4080
    +++++ Analysis of SIP Phone making a call +++++++++
    The user picks up the phone and the IP Phone sends a NOTIFY to CUCM to indicate the start of a new dialog. This dialog begings by an offhook event
    00869539.002 |14:58:13.837 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 976 bytes:
    [46240,NET]
    NOTIFY sip:[email protected] SIP/2.0
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00002531
    To: <sip:[email protected]>
    From: <sip:[email protected]>;tag=544e42f26d0b001e000056e7-0000311c
    Call-ID: [email protected]
    Date: Mon, 16 Feb 2015 12:58:13 GMT
    CSeq: 11 NOTIFY
    Event: dialog
    Subscription-State: active
    Max-Forwards: 70
    Contact: <sip:[email protected]:52910;transport=TCP>
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
    Content-Length: 350
    Content-Type: application/dialog-info+xml
    Content-Disposition: session;handling=required
    <?xml version="1.0" encoding="UTF-8" ?>
    <dialog-info xmlns:call="urn:x-cisco:parmams:xml:ns:dialog-info:dialog:callinfo-dialog" version="10" state="partial" entity="sip:[email protected]">
    <dialog id="6" call-id="[email protected]" local-tag="544e42f26d0b001d00007cc9-000044a3"><state>trying</state></dialog>
    </dialog-info>
    ++++ CUCM SIP stack processes the new connection for the phone+++++++
    00869540.001 |14:58:13.837 |AppInfo  |//SIP/Stack/Info/0x0/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 (SIP_NETWORK_MSG), for event 1 (SIPSPI_EV_NEW_MESSAGE)
    00869540.002 |14:58:13.837 |AppInfo  |//SIP/Stack/Transport/0x0/sipTransportProcessNWNewConnMsg: context=(nil)
    00869540.003 |14:58:13.837 |AppInfo  |//SIP/Stack/Transport/0x0/sipConnectionManagerProcessNewConnMsg: gConnTab=0xe81c0d70, addr=10.50.16.1, port=52910, connid=2748, transport=TCP
    ++++ Next CUCM allocates a call id for this call +++++
    00869546.002 |14:58:13.838 |AppInfo  |LineControl(66) - Get call instance=1 for CI=24419584
    +++Next CUCM sends a 200 OK to the NOTIFY request for the new dialog ++++
    00869555.007 |14:58:13.839 |AppInfo  |//SIP/Stack/Transport/0x0xe7df4d48/sipTransportPostSendMessage: Posting send for msg=0xefbe9910, addr=10.50.16.1, port=52910, connId=2748 for
    00869555.008 |14:58:13.839 |AppInfo  |//SIP/Stack/Info/0x0/act_dialog_pending_resp_event: Changing from State: SUBSCRIBE_STATE_DIALOG_PENDING to state SUBSCRIBE_STATE_ACTIVE
    00869556.000 |14:58:13.839 |SdlSig   |SIPSPISignal                           |wait                           |SIPTcp(1,100,71,1)               |SIPHandler(1,100,79,1)           |1,100,14,31314.75^10.50.16.1^SEP00909E9D106C |*TraceFlagOverrode
    00869556.001 |14:58:13.839 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
    [46241,NET]
    SIP/2.0 200 OK
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00002531
    From: <sip:[email protected]>;tag=544e42f26d0b001e000056e7-0000311c
    To: <sip:[email protected]>;tag=1822746380
    Date: Mon, 16 Feb 2015 12:58:13 GMT
    Call-ID: [email protected]
    CSeq: 11 NOTIFY
    Server: Cisco-CUCM10.5
    Content-Length: 0
    ++++ The IP Phone sends its connection ID to CUCM, its ip address and its port number+++++++++
    00869541.001 |14:58:13.838 |AppInfo  |SIPStationInit: connID=2748, SEP00909E9D106C, 10.50.16.1:52910, Routed signal by connection index to (1,100,73,66)
    ++++ Next CUCM informs us that the NOTIFY message is for an offhook event ++++++
    00869542.003 |14:58:13.838 |AppInfo  |SIPStationD(66) - processCommonDialogNotifyInd: Notified Dialogs - Did 6 State trying
    00869542.004 |14:58:13.838 |AppInfo  |SIPStationD(66) - processCommonDialogNotifyInd:   Did 6 Sending Notified SIPOffHook to new Cdfc
    00869542.010 |14:58:13.838 |AppInfo  |SIPStationD(66) - processSIPOffHook Primary Call Not-Found
    00869543.000 |14:58:13.838 |SdlSig   |SIPOffHookInd 
    +++ The next thing is the USER dials a digit on the phone ++++++
    This is where it gets a little complicated. So lets examine this. The first digit that is dialled generates an INVITE to CUCM like this:
    In this example the user dialled "4" first so we see an "INVITE sip:4@host-IP"
    00869559.002 |14:58:14.064 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 1445 bytes:
    [46242,NET]
    INVITE sip:[email protected];user=phone SIP/2.0
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000015ec
    From: "Emre ESEN" <sip:[email protected]>;tag=544e42f26d0b001d00007cc9-000044a3
    To: <sip:[email protected];user=phone>
    Call-ID: [email protected]
    Max-Forwards: 70
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    CSeq: 101 INVITE
    User-Agent: Cisco-SIPIPCommunicator/9.1.1
    Contact: <sip:[email protected]:52910;transport=tcp>
    Expires: 180
    Accept: application/sdp
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE,INFO
    Remote-Party-ID: "Emre ESEN" <sip:[email protected]>;party=calling;id-type=subscriber;privacy=off;screen=yes
    Supported: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-5.1.0,X-cisco-xsi-8.5.1
    Allow-Events: kpml,dialog
    Content-Length: 373
    Content-Type: application/sdp
    Content-Disposition: session;handling=optional
    v=0
    o=Cisco-SIPUA 21020 0 IN IP4 10.50.16.1
    s=SIP Call
    t=0 0
    m=audio 20250 RTP/AVP 0 8 18 9 116 124 101
    c=IN IP4 10.50.16.1
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:9 G722/8000
    a=rtpmap:116 iLBC/8000
    a=fmtp:116 mode=20
    a=rtpmap:124 ISAC/16000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=sendrecv
    +++++ NEXT CUCM sends a trying for the INVITE it received +++++++++++
    00869562.001 |14:58:14.065 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
    [46243,NET]
    SIP/2.0 100 Trying
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000015ec
    From: "Emre ESEN" <sip:[email protected]>;tag=544e42f26d0b001d00007cc9-000044a3
    To: <sip:[email protected];user=phone>
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow-Events: presence
    Content-Length: 0
    ++++NOW CUCM evaluates the DTMF supported by the phone to determine how to inform the phones to send the remaining dtmf digits++++
    From the INVITE cucm concludes that KPML and rtp-nte is supported
    00869566.009 |14:58:14.066 |AppInfo  |setEndpointsDtmfCaps: KPML Supported.
    00869566.010 |14:58:14.066 |AppInfo  |setEndpointsDtmfCaps: Detected inband DTMF support
    Next CUCM generates kpml event pkg which is going to be used to receive the remaining digits from the phone
    00869590.001 |14:58:14.067 |AppInfo  |SIPEventPkg::SIPEventPkg 0xe4a1d1e0 scbId[16725], event name[kpml; [email protected]; from-tag=544e42f26d0b001d00007cc9-000044a3], id[]
    +++ Next CUCM sends a SUBSCRIBE to the IP phone for kpml event +++++
    00869594.001 |14:58:14.068 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
    [46244,NET]
    SUBSCRIBE sip:[email protected]:52910 SIP/2.0
    Via: SIP/2.0/TCP 10.28.132.111:5060;branch=z9hG4bKce719b37856
    From: <sip:[email protected]>;tag=480227084
    To: <sip:[email protected]>
    Call-ID: [email protected]
    CSeq: 101 SUBSCRIBE
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    User-Agent: Cisco-CUCM10.5
    Event: kpml; [email protected]; from-tag=544e42f26d0b001d00007cc9-000044a3
    Expires: 7200
    Contact: <sip:[email protected]:5060;transport=tcp>
    Accept: application/kpml-response+xml
    Max-Forwards: 70
    Content-Type: application/kpml-request+xml
    Content-Length: 424
    <?xml version="1.0" encoding="UTF-8" ?>
    <kpml-request xmlns="urn:ietf:params:xml:ns:kpml-request" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:ietf:params:xml:ns:kpml-request kpml-request.xsd" version="1.0">
      <pattern criticaldigittimer="1000" extradigittimer="500" interdigittimer="15000" persist="persist">
        <regex tag="Backspace OK">[x#*+]|bs</regex>
      </pattern>
      </kpml-request>
     +++ Next we get a 200 OK to the SUBSCRIBE from the ip phone ++++
     00869595.002 |14:58:14.118 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 459 bytes:
    [46245,NET]
    SIP/2.0 200 OK
    Via: SIP/2.0/TCP 10.28.132.111:5060;branch=z9hG4bKce719b37856
    From: <sip:[email protected]>;tag=480227084
    To: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    Call-ID: [email protected]
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    CSeq: 101 SUBSCRIBE
    Server: Cisco-SIPIPCommunicator/9.1.1
    Contact: <sip:[email protected]:52910;transport=TCP>
    Expires: 7200
    Content-Length: 0
    +++ NEXT the IP phones sends the remaining digit dialled on the phone to CUCM +++
    00869603.002 |14:58:14.183 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 573 bytes:
    [46247,NET]
    NOTIFY sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000045c8
    To: <sip:[email protected]>;tag=480227084
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    Call-ID: [email protected]
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    CSeq: 1000 NOTIFY
    Event: kpml
    Subscription-State: active; expires=7200
    Max-Forwards: 70
    Contact: <sip:[email protected]:52910;transport=TCP>
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
    Content-Length: 0
    00869608.001 |14:58:14.183 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
    [46248,NET]
    SIP/2.0 200 OK
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000045c8
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    To: <sip:[email protected]>;tag=480227084
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    Call-ID: [email protected]
    CSeq: 1000 NOTIFY
    Server: Cisco-CUCM10.5
    Content-Length: 0
    +++Next the IP phone sends the next digit. Here its important to note that the NOTIFY doesnt contain the next digit,
    the NOTIFY is still the same as the first digit but the next digit is carried in the xml document attached to the NOTIFY.
    At this point I will insert a paragraph from the RFC 4730 for SIP KPML
    +++++++++++++
    The event package uses SUBSCRIBE
       messages and allows for XML documents that define and describe filter
       specifications for capturing key presses (DTMF Tones) entered at a
       presentation-free User Interface SIP User Agent (UA).  The event
       package uses NOTIFY messages and allows for XML documents to report
       the captured key presses (DTMF tones), consistent with the filter
       specifications, to an Application Server +++++++++++++++++++++++++++
    00869609.002 |14:58:14.209 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 877 bytes:
    [46249,NET]
    NOTIFY sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00003c9d
    To: <sip:[email protected]>;tag=480227084
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    Call-ID: [email protected]
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    CSeq: 1001 NOTIFY
    Event: kpml
    Subscription-State: active; expires=7200
    Max-Forwards: 70
    Contact: <sip:[email protected]:52910;transport=TCP>
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
    Content-Length: 209
    Content-Type: application/kpml-response+xml
    Content-Disposition: session;handling=required
    <?xml version="1.0" encoding="UTF-8"?>
    <kpml-response xmlns="urn:ietf:params:xml:ns:kpml-response" version="1.0" code="200" text="OK" suppressed="false" forced_flush="false" digits="0" tag="Backspace OK"/>
    00869622.001 |14:58:14.210 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
    [46250,NET]
    SIP/2.0 200 OK
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00003c9d
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    To: <sip:[email protected]>;tag=480227084
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    Call-ID: [email protected]
    CSeq: 1001 NOTIFY
    Server: Cisco-CUCM10.5
    Content-Length: 0
    +++ Again we get the next digit ++++
    00869624.002 |14:58:14.262 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 877 bytes:
    [46251,NET]
    NOTIFY sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK0000310f
    To: <sip:[email protected]>;tag=480227084
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    Call-ID: [email protected]
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    CSeq: 1002 NOTIFY
    Event: kpml
    Subscription-State: active; expires=7200
    Max-Forwards: 70
    Contact: <sip:[email protected]:52910;transport=TCP>
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
    Content-Length: 209
    Content-Type: application/kpml-response+xml
    Content-Disposition: session;handling=required
    <?xml version="1.0" encoding="UTF-8"?>
    <kpml-response xmlns="urn:ietf:params:xml:ns:kpml-response" version="1.0" code="200" text="OK" suppressed="false" forced_flush="false" digits="8" tag="Backspace OK"/>
    00869637.001 |14:58:14.263 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
    [46252,NET]
    SIP/2.0 200 OK
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK0000310f
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    To: <sip:[email protected]>;tag=480227084
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    Call-ID: [email protected]
    CSeq: 1002 NOTIFY
    Server: Cisco-CUCM10.5
    Content-Length: 0
    +++ Finally we get the last digit ++++
    00869638.002 |14:58:14.390 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 877 bytes:
    [46253,NET]
    NOTIFY sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00006c1c
    To: <sip:[email protected]>;tag=480227084
    From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
    Call-ID: [email protected]
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    CSeq: 1003 NOTIFY
    Event: kpml
    Subscription-State: active; expires=7200
    Max-Forwards: 70
    Contact: <sip:[email protected]:52910;transport=TCP>
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
    Content-Length: 209
    Content-Type: application/kpml-response+xml
    Content-Disposition: session;handling=required
    <?xml version="1.0" encoding="UTF-8"?>
    <kpml-response xmlns="urn:ietf:params:xml:ns:kpml-response" version="1.0" code="200" text="OK" suppressed="false" forced_flush="false" digits="0" tag="Backspace OK"/>
    Once digit collection is completed CUCM proceeds to finalise its digit analysis process.
    Note that digit analysis is carried out for each digit that is recieved. I have only included the final DA here
    00869648.003 |14:58:14.391 |AppInfo  |Digit Analysis: star_DaReq: Matching SIP URL, Numeric User, user=4080
    00869648.004 |14:58:14.391 |AppInfo  |Digit Analysis: getDaRes data: daRes.ssType=[0] Intercept DAMR.sstype=[0], TPcount=[0], DAMR.NotifyCount=[0], DaRes.NotifyCount=[0]
    00869648.005 |14:58:14.391 |AppInfo  |Digit Analysis: getDaRes - Remote Destination [4080] isURI[0]
    00869648.012 |14:58:14.391 |AppInfo  |Digit analysis: match(pi="2", fqcn="9106", cn="9106",plv="5", pss="", TodFilteredPss="", dd="4080",dac="0")
    00869648.013 |14:58:14.391 |AppInfo  |Digit analysis: analysis results
    00869648.014 |14:58:14.391 |AppInfo  ||PretransformCallingPartyNumber=9106
    |CallingPartyNumber=9106
    |DialingPartition=
    |DialingPattern=4XXX
    |FullyQualifiedCalledPartyNumber=4080
    |DialingPatternRegularExpression=(4[0-9][0-9][0-9])
    |DialingWhere=
    +++++Once this is done CUCM then proceeds to send the call out to to the intended destination as configured in the RL ++++
    00869701.001 |14:58:14.435 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.250.0.13 on port 5060 index 2754
    [46256,NET]
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 10.28.132.111:5060;branch=z9hG4bKce931ee3d74
    From: "Emre ESEN" <sip:[email protected]>;tag=16726~813ee89e-33db-4d58-9f6a-61542cc840ee-24419585
    To: <sip:[email protected]>
    Date: Mon, 16 Feb 2015 12:58:14 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces

  • How can calculate Bandwidth for ACS packet

    Dear All !
    My network : AS5400 at remote site sent ACS information (only VoIP Accounting information: CDR-Call detail record) to Center site via IP WAN link (512k).
    How can I know how much Bandwidth need for ACS packets/ 1 call ?
    Anyone help me some idea to calculate this BW
    Thansk so much

    Hi ,
    There are many bandwidth monitor available that you can set up on acs sever. This will give you idea how much traffic is received by acs during the particular call.
    Also you can try sniffing acs port to get an rough idea about the traffic generated.
    Regards,
    ~JG

  • QoS config for Video Traffic

    Hello all,
    I have a campus network with several remote sites, at the campus I have a 6509 at the core and 3560 and 3750 switches at the access layer. I do have QoS enable on the 6509 and I am using auto QoS on the 3560 and 3750 switches and all seems to be working fine with my existing VOIP environment. But now as I am in the middle of rolling out a video conferencing solution with the existing QoS config I am experiencing a noticeable delay between audio and video. Example like during a video call I can tell that the voice and the lips of the person speaking are not in synch.
    Has anyone run into this issue ? can someone provide me a sample QoS config for the 6509 and 3560/3750 switches ?
    P.S. I am using a Tandberg/Codian solution for video conferencing with Tandberg/Codian MCU, IP Gateway, ISDN Gateway and Tandberg endpoints. And both the endpoints and the back-end infrastructure devices and are set for IP Precedence 5.
    Thank you very much in advance !!!
    Danny

    The main concern with configuring your back-end infrastructure devices with IP Precedence value 5 is that the 3560/3750 auto-qos will map this value to Q1 which is ordinarily the strict priority Q.
    In most cases auto-qos will also configure or map Video to Q3, you can see this as a majority SRR bandwidth is assigned to the Q.
    In order to use the strict priority queue, it has to be enabled on the interface 'priority-queue out', without it Q1 will not be emptied before the others. It will be serviced according to the weight.
    With auto-qos Q1 will not have enough bandwidth as it will be assigned to Q3. Therefore you could initially enable priority-queue if not already enabled so that Q1 is emptied first, or you increase the weight.
    The next question is whether you are using egress scheduling within the Core? and this conforms to your edge classification for Video?
    HTH.
    Allan

  • Proper TLS Config for IronPort C170

    I inherited an infrastructure a little bit ago that uses an IronPort C170 cluster for email security. I have been tasked with configuring TLS connections with our new medical benefits provider and have some issues doing so. We have 3 MX records, let's call them mail1, mail2 and mail3. Mail1 and mail2 are configured normally on our firewall to pass SMTP traffic on port 25 to the MailListener port on the IronPort which is 25. Mail3, however, is configured on the firewall to translate SMTP traffic on port 25 to port 3600 which is sent to the TLS Listener port 3600 on the IronPort. The IronPort MailInterfaces are configured as such (25,3600) Reverse configuration on the firewall takes any port 3600 traffic from the IronPort and translates it to port 25 traffic for the rest of the world.
    I configured the IronPort with a new Sender Group named TLS_ACCEPT,  added all the medical provider domain names/IPs to it and assigned it to  the ACCEPTED Mail Flow Policy where TLS is set to Required. Likewise,  for outgoing, I specified the same domain names/IPs within the  Destination Controls to require TLS for sending purposes.
    I replaced the guy who originally configured this so I am not too sure how it is setup on the other end for TLS connections already established. We do have a few in place that are active. I am assuming that the other end is configured to send email only to the mail3 MX record. This configuration, however, is not possible with our medical provider so I need an alternative. They have verified that they cannot contact us on mail1 or mail2 via TLS but can with mail3.
    The obvious problem is if a sender from these new domains tries to send TLS_required emails to us over the mail1 and mail2 MX IPs, they will receive an NDR. If I configure the firewall to translate mail1 and mail2 incoming connections from port 25 to 3600, any email sent with TLS not prefered/required will get an NDR. This was actually tested and domains like Yahoo and Hotmail could not send to us.
    Are there any options for me on the IronPort to allow these connections to be sent from all our MX IPs without having to translate the ports? If not, what would happen if I changed the TLS Listener port on the IronPort to 25 instead of 3600 and disabled all the NAT rules on the firewall for mail3? I am only to assume this translation was another security step added by the previous admin here but am not too sure what would happen if I eliminated it.
    Any advice, help, questions, assistance or fun-poking would be greatly appreciated!! Thank you in advance!

    Kevin,
    OMG there's so much unneeded complication here...You can totally ditch the port translation
    Here's what I did:
    Under Network/IP interfaces, I have 3 interfaces:  managment, Public, Private.
         Public is exposed to the net, only port 25 allowed in/out, with 1 A  record for a Domain1 which I have a certificate for.
    Under Network/Listener I have 2 Listeners: 
         Outbound on the Private interface not really relavent for the rest of this discussion
         Inbound on the Public interface
              listening on port 25
              using an Accept query pointed at my Active Directory (all the various email domains in 1 AD)
              using a cert that matches the hostname on the Public interface
              Mail flow polices in HAT all set to TLS preferred with an address list configed for the "required" ones
    Mail Policies/Destination Controls to force sending as TLS
    In my external DNS
         Domain1
              A  mail.domain1.com  x.x.x.
              mx domain1.com  mail.domain1.com pref 10 weight 10 TTL 86400
         Domain2-10
              mx domain2.com mail.domain1.com
              mx domain3.com mail.domain1.com
         etc....
    Hope that helps...
    Ken    

  • How do I troubleshoot a blue screen on a Pavilion dv4-1123us with "hardware malfunction call hardware vendor for support" message?

    I keep getting this screen and before I have to call and pay and wanted to see if there was something that I could do.
    Pavilion dv4-1123us  get blue screen with "hardware malfunction    call hardware vendor for support"
    This question was solved.
    View Solution.

    I would say its just a conicidence and recommend you to do a system restore. As its an intermittent problem, you never know if you face same issue once again.
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Config for Production client

    Dear all,
    I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
    In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
    How do we config for Production client to cover this requirements ?
    Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
    Thank you very much.
    Regards,
    Thanh.
    Do not use text message language, the next time your thread will be deleted.
    Read the "Rules of Engagement"
    Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

    You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
    Note 1497640 - Open and close periods in productive client
    You can theoretically put every customizing view there and make it "executable" in a production system.
    Markus

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • HT5035 I had a balance of $5.30 on my account. It disappeared when I added a $25 gift card. I have tried to get this issue resolved thru email. I need a call back. Where do I look to get a call back number for this issue

    I have already contacted apple thru email, twice. I don't see that they have an option for a call back for a missing iTunes balance, I did however see where I could get a call back(and did) for not being able to sign in on another device to make a purchase. This problem was resolved quickly for this device. I told this rep about the unresolved problem of the missing iTunes balance and he said he could transfer me but the wait times are very long. In my 2 email correspondences on this missing balance issue both times I was told to check my balance history- which does not resolve the issue that I am having to go thru a huge hassle to get my missing balance back prior to my card purchase. I had a balance of $5.86 show on my ipad2 and on my Mac book pro prior to applying the $25 gift card. Then the balance showed only $25 after apply my gift card, now here's what's weird: aprox. A week and a half later I sign in on my iPod touch and shows a balance of $5.30!, but when it has me resign into iTunes that balance disappeared, and the $25 gift card balance shows up. I made NO PURCHASES to use the $5.86/ or $5.30- so I want my money to equal $30.30/ or $30.86 as it should, and I want to not go thru so much to take care of it. To just hope Apple would have a call back option for this type of issue. I won't be buying iTunes gift cards or purchasing thru iTunes if my balance disappears when I do so.

    When you tried to contact Support with the card's images how were you trying to do it, on your phone or a browser on your computer ? And have you tried a different browser to see if you get the same error message ?
    As well as images of the card they might also want an image of its receipt.
    And to contact Support you were using : http://www.apple.com/support/itunes/contact/ , and clicked on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes ?

  • I am looking for a good Call Blocking App for my iPhone 5...any suggestions??

    I am in need of a good call blocking app for iPhone....please any suggestions will be greatly appreciated!

    As Randy Landry1 says, Google for "silent ringtone", download and install on you iPhone as a ringtone.
    Now create a contact for the offending phone number. Assign the contact to the silent ringtone and set no vibrate.
    When that number calls it will not ring, nor vibrate. It will light up the screen, but if you do not see that, it will not bother you. They could leave voice mail, but that is easily deleted.
    And if it is a situation where the are violating the do not call list, you can use the missed call log to report the number to the FTC.
    Also, if the calls are abusive or threading, and the leave a voice mail, you something to show the police.

  • Finalize() method being called multiple times for same object?

    I got a dilly of a pickle here.
    Looks like according to the Tomcat output log file that the finalize method of class User is being called MANY more times than is being constructed.
    Here is the User class:
    package com.db.multi;
    import java.io.*;
    import com.db.ui.*;
    import java.util.*;
    * @author DBriscoe
    public class User implements Serializable {
        private String userName = null;
        private int score = 0;
        private SocketImage img = null;
        private boolean gflag = false;
        private Calendar timeStamp = Calendar.getInstance();
        private static int counter = 0;
        /** Creates a new instance of User */
        public User() { counter++;     
        public User(String userName) {
            this.userName = userName;
            counter++;
        public void setGflag(boolean gflag) {
            this.gflag = gflag;
        public boolean getGflag() {
            return gflag;
        public void setScore(int score) {
            this.score = score;
        public int getScore() {
            return score;
        public void setUserName(String userName) {
            this.userName = userName;
        public String getUserName() {
            return userName;
        public void setImage(SocketImage img) {
            this.img = img;
        public SocketImage getImage() {
            return img;
        public void setTimeStamp(Calendar c) {
            this.timeStamp = c;
        public Calendar getTimeStamp() {
            return this.timeStamp;
        public boolean equals(Object obj) {
            try {
                if (obj instanceof User) {
                    User comp = (User)obj;
                    return comp.getUserName().equals(userName);
                } else {
                    return false;
            } catch (NullPointerException npe) {
                return false;
        public void finalize() {
            if (userName != null && !userName.startsWith("OUTOFDATE"))
                System.out.println("User " + userName + " destroyed. " + counter);
        }As you can see...
    Every time a User object is created, a static counter variable is incremented and then when an object is destroyed it appends the current value of that static member to the Tomcat log file (via System.out.println being executed on server side).
    Below is the log file from an example run in my webapp.
    Dustin
    User Queue Empty, Adding User: com.db.multi.User@1a5af9f
    User Dustin destroyed. 0
    User Dustin destroyed. 0
    User Dustin destroyed. 0
    User Dustin destroyed. 0
    User Dustin destroyed. 0
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin destroyed. 1
    User Dustin destroyed. 1
    User Dustin destroyed. 1
    User Dustin destroyed. 1
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    User Dustin destroyed. 2
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    User Dustin destroyed. 3
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    User Dustin destroyed. 4
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    User Dustin destroyed. 5
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    User Dustin destroyed. 6
    Joe
    USER QUEUE: false
    INSIDE METHOD: false
    AFTER METHOD: false
    User Dustin pulled from Queue, Game created: Joe
    User Already Placed: Dustin with Joe
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    User Dustin destroyed. 7
    INSIDE METHOD: false
    INSIDE METHOD: false
    USER QUEUE: true
    INSIDE METHOD: false
    INSIDE METHOD: false
    User Dustin destroyed. 9
    User Joe destroyed. 9
    User Dustin destroyed. 9
    User Dustin destroyed. 9
    User Dustin destroyed. 9
    User Dustin destroyed. 9
    INSIDE METHOD: true
    INSIDE METHOD: false
    USER QUEUE: true
    INSIDE METHOD: false
    INSIDE METHOD: false
    INSIDE METHOD: true
    INSIDE METHOD: false
    USER QUEUE: true
    INSIDE METHOD: false
    INSIDE METHOD: false
    It really does seem to me like finalize is being called multiple times for the same object.
    That number should incremement for every instantiated User, and finalize can only be called once for each User object.
    I thought this was impossible?
    Any help is appreciated!

    Thanks...
    I am already thinking of ideas to limit the number of threads.
    Unfortunately there are two threads of execution in the servlet handler, one handles requests and the other parses the collection of User objects to check for out of date timestamps, and then eliminates them if they are out of date.
    The collection parsing thread is currently a javax.swing.Timer thread (Bad design I know...) so I believe that I can routinely check for timestamps in another way and fix that problem.
    Just found out too that Tomcat was throwing me a ConcurrentModificationException as well, which may help explain the slew of mysterious behavior from my servlet!
    The Timer thread has to go. I got to think of a better way to routinely weed out User objects from the collection.
    Or perhaps, maybe I can attempt to make it thread safe???
    Eg. make my User collection volatile?
    Any opinions on the best approach are well appreciated.

  • Config for Dispatch Intrastat

    Hello Experts,
    Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
    Regards,
    Karan

    Hello Karan,
    We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
    In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
    Thanks,
    Sarthak

Maybe you are looking for

  • RMAN-04025 when performing automated TSPITR in Oracle 11g R2 (Enterprise)

    Hi guys, I'm sort of new to Oracle, so here is the problem I'm encountering: I have a database ('foo'), in which I have created a tablespace ('blue') (not as sysdba, but as user01 with dba privileges). I also created a table in tablespace's datafile

  • Third party CMS tool with SAP EP.

    Hello, I'm looking for a third party content management tool which can be plugged with SAP EP. Can you please suggest on this. Thanks in advance. Adiga Shrinivasa

  • Adobe Shockwave Player 11.6.4.634 msi download

    I downloaded the msi version of Adobe Shockwave Player 11.6.4.634 and installed it, but version still say 11.6.3.633. I downloaded the msi here: http://www.adobe.com/products/shockwaveplayer/shwv_distribution3.html. I need the msi version to distrubu

  • Unable to scan on mac X.7

    Hello. I'm using the software downloaded through Apple as instructed here and still every time I try to scan it does not work. Any ideas on what else I can try? The printer option works fine btw.

  • PO13 and 0001 infotype (HR_INFOTYPE_OPERATION + badi HRBAS00INFTY

    Hello Friends, We have cretaed a position description subtype and assigned it to 1002 infotype. Query: 1) Adding 2 customer fields(Subtype and description) to infotype 0001 (This is done using PM01). 2) Using Po13, they assign a subtype(position desc