Caller identity?????

good day
newbie on the BB using the BB Curve 8520 since 09.01.2010
is there any body who can tell me how to setup my caller identity - meaning to see who is calling me. all incoming calls are shown as unknown and i have correctly completed my contacts.
also how to increase the volume on incoming sms an email notifications.
please this is frustrating
thanks

Often, Caller ID is a 'feature' that your wireless company enables at their end - and depending on your Plan, is included or is available at an additional charge. If you think you should have it and its not showing up, call their Support to ensure its set up.
As for volume of various notifications, look on your Blackberry for Options > Profiles (Ring Tones) > Normal (Active) and then scroll to the applicable service and click. There you will be able to set the tone, vibe and volume. Once done, click the Back arrow > Save and then you should be good to go. Note there are individual settings to 'Out of Holster' and 'In Holster' - be sure to set both.
Hope this helps!

Similar Messages

EJBException::No valid security context for the caller identity

Hi,
I was working with EJB and i had a basic doubt in security propogation from the web tier to EJB tier.
I deployed an EJB on JBOSS app server and in that bean i was trying to get the caller principal object from the EJBContext and i was printing the name of the principal.
System.out.println(ctx.getCallerPrincipal().getName());
then i created ordinary EJB client which is a java class and when i invoked the business method i was getting the below error
Exception in thread "main" javax.ejb.EJBException: java.lang.IllegalStateException: No valid security context for the caller identity
at org.jboss.ejb3.tx.Ejb3TxPolicy.handleExceptionInOurTx(Ejb3TxPolicy.java:63)
at org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:83)
at org.jboss.aspects.tx.TxInterceptor$Required.invoke(TxInterceptor.java:191)
This error sounds meaningful but how will i set the security context from the java class. If it can be done then is this the same way that the security principal propogates from web tier to EJB tier.
Thanks,
Suresh B

Hi,
I was working with EJB and i had a basic doubt in security propogation from the web tier to EJB tier.
I deployed an EJB on JBOSS app server and in that bean i was trying to get the caller principal object from the EJBContext and i was printing the name of the principal.
System.out.println(ctx.getCallerPrincipal().getName());
then i created ordinary EJB client which is a java class and when i invoked the business method i was getting the below error
Exception in thread "main" javax.ejb.EJBException: java.lang.IllegalStateException: No valid security context for the caller identity
at org.jboss.ejb3.tx.Ejb3TxPolicy.handleExceptionInOurTx(Ejb3TxPolicy.java:63)
at org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:83)
at org.jboss.aspects.tx.TxInterceptor$Required.invoke(TxInterceptor.java:191)
This error sounds meaningful but how will i set the security context from the java class. If it can be done then is this the same way that the security principal propogates from web tier to EJB tier.
Thanks,
Suresh B

EJBHomeFactory and caller identity

Currently I am passing the user identity when I create the InitialContext, and
I access this user information during some processing in the EJB ( Entity/StatelessSession
If I were to cache Home references, then who is the caller when a home.create()
is invoked? Is there an implicit caller? ( doesn't sound right ) or is it the
caller who had originally created this home reference?
How can I associate a particular user with a home reference?
Thx, Sonali.

Thanks. What you mention sounds right. However, how does the method invocation
know who the user is? If the client is outside weblogic and he asks a factory
to give him a home reference, and then he invokes home.find() or home.create(),
then where is his identity being passed in?
Is there some standard that mandates this behaviour? I did not see anything in
the ejb spec.
>
Hi,
If I were to cache Home references, then who is the caller when a home.create()
is invoked? Is there an implicit caller? ( doesn't sound right ) oris
it the
caller who had originally created this home reference? The create method will be called with the context of the current user
not the
context of the user who had originally created this home reference .
"Sonali" <[email protected]> wrote:
Currently I am passing the user identity when I create the InitialContext,
and
I access this user information during some processing in the EJB ( Entity/StatelessSession
If I were to cache Home references, then who is the caller when a home.create()
is invoked? Is there an implicit caller? ( doesn't sound right ) oris
it the
caller who had originally created this home reference?
How can I associate a particular user with a home reference?
Thx, Sonali.

SessionContext contains wrong caller identity on cluster environment

I have follwoing problem.
I need to process first anonymous call to EJB from client and next calls should be not-anonymous.
I create InitialContext with Context.SECURITY_PRINCIPAL and Context.SECURITY_CREDENTIALS set to value "anonymous". To make second call to EJB I close explicitly previous InitialContext and create new one passing real values in Context.SECURITY_PRINCIPAL and Context.SECURITY_CREDENTIALS
If I work with standalone AppServers everything works fine but as I switch to Oracle AS cluster I SOMETIMES get from SessionContext.getCallerPrincipal() real value which was passed on client side to InitialContext and SOMETIMES I get this "anonymous".
It looks like some kind of caching makes it wrong. But I have no idea in which direction to go. Can anybody help me?
One remark to this: I get such behaviour even in the case if all calls from client go to the same server (I see it in rmi debug on client).

Hi Prashant,
Thank you for your posting!
Since the issue is related to Azure, I suggest you refer to the experts on Azure forums to get more efficient support:
Azure Active Directory Forum
http://social.technet.microsoft.com/Forums/windowsazure/en-US/home?forum=windowsazureaditpro&filter=alltypes&sort=lastpostdesc
Managing Services on Azure Forum
http://social.technet.microsoft.com/Forums/windowsazure/en-US/home?forum=windowsazuremanagement
Thank you for your understanding and support!
Amy

Didn't receive verification code for caller identi...

Hi Dear Please Help Me.......... i am try Caller identification but i don't receive verification code

I am unable to set up caller id! I am not recieveing the text message the site promises to send for verification. I have tried several times to no avail. Seems from the many posts here this is a problem many people are having. Is skype going to do anything about it? How do I get a hold of a technichian?
Julie Hallmark

E63-not always showing caller identity

strange thing, tried every setting on contact, but would show me all the time the callers identity, only the number. i tested with numbers saved on SIM and in phone, but not a chance.
is there any trick to this? am i missing something here?
thanks

There are several threads continuing in this forum on the issue. You can search them, but what I understand is that the problem is caused by multiple entries of the same contacts.
mgoksoy

Caller Identity problem on the 8900

Hi - can anyone help me fix this ?
Frequently - but mysteriously, not all the time - a call comes through with just the number displayed, even though the number is already in my contacts database. This happens randomly with different numbers.
Even weirder, after the call when I look on the sent and received calls list (pressing the green handset button), it has correctly identified the number as one of my contacts.
So why is my 8900 not displaying the contact name on my screen at the time when the call comes through ?
I am sure that others have experienced this fault, but I cant find the relevant threads. Thanks in advance for your help.

I have the same fault, the phone not displaying the callers name from my address book, but appearing correct in the call log.
Tried a re-boot, fixed the fault, but not permanatly, intermittantly works
The oly fix i have found to work is to swap the start of of the mobile number 07 with +447 (uk prefix)
Only tried this yesterday, and all good since, but watch this space

How do I find and use the Firefox Identity Finder feature?

On a web page that compares various Web browsers, the following narrative describes a Firefox 5.0 feature called Identity Finder:
"Once Identity Finder has secured all exposed private data, a laptop thief or spying Trojan won't be able to steal your identity."
I am running Firefox version 5.0.1.
Thanks,
DDOcean
[email protected]

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

NO_PERMISSION Exception when calling secured EJB-methods

In WL6.1, I have an Ejb with secured methods. The (Swing) client application accesses the Ejb through rmi-iiop using the JDK1.3.1 Orb.
Unfortunately, it seems that the caller identity (which was supplied in the InitialContext lookup) is not propagated
to the server: any call to a secured method
fails with a CORBA NO_PERMISSION Exception.
Non secured methods work fine.
Using the t3 protocol the program also works fine, but that would require
the 25Mb weblogic.jar on all clients,
which is unattainable for us.
Any ideas how this situation can be corrected?
-Allard Siemelink

I am still getting the NO_PERMISSION Exception when using "weblogic.jndi.WLInitialContextFactory".
We use Sun's JRE, version 1.3.1_01.
Am I forgetting something?
My code is as follows:
InitialContext context = null;
try {
Hashtable ht = new Hashtable();
ht.put(InitialContext.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
ht.put(InitialContext.PROVIDER_URL, "iiop://localhost:80");
ht.put(InitialContext.SECURITY_PRINCIPAL, "system");
ht.put(InitialContext.SECURITY_CREDENTIALS, "system_password");
context = new InitialContext(ht);
Object objHome = context.lookup(EJB_NAME);
MyHome myHome = (MyHome)PortableRemoteObject.narrow(objHome, MyHome.class);
MyRemote myRemote = myHome.create();
//NEXT LINE Crashes when method is secured:
myRemote.securedMethod();
finally {
if (context!=null) context.close();
Andy Piper <[email protected]> wrote:
Allard Siemelink <[email protected]> writes:
In WL6.1, I have an Ejb with secured methods. The (Swing) client applicationaccesses the Ejb through rmi-iiop using the JDK1.3.1 Orb.
Unfortunately, it seems that the caller identity (which was suppliedin the InitialContext lookup) is not propagated
to the server: any call to a secured method
fails with a CORBA NO_PERMISSION Exception.Make sure you are using WLInitialContextFactory and not
CNCtxFactory. Only the former will give you security.
andy

Rmi-iiop: calling secured method on Ejb -- NO PERMISSION Exception

In WL6.1, I have an Ejb with secured methods. The (Swing) client application accesses the Ejb through rmi-iiop using the JDK1.3.1 Orb.
Unfortunately, it seems that the caller identity (which was supplied in the InitialContext lookup) is not propagated
to the server: any call to a secured method
fails with a CORBA NO_PERMISSION Exception.
Using the t3 protocol the program works fine, but that would require the 25Mb weblogic.jar on all clients, which is unattainable for us.
Any ideas how this situation can be corrected?
-Allard Siemelink

Hi Allard,
Please pose this in the weblogic.developer.interest.rmi-iiop.
Thanks,
Allard Siemelink wrote:
In WL6.1, I have an Ejb with secured methods. The (Swing) client application accesses the Ejb through rmi-iiop using the JDK1.3.1 Orb.
Unfortunately, it seems that the caller identity (which was supplied in the InitialContext lookup) is not propagated
to the server: any call to a secured method
fails with a CORBA NO_PERMISSION Exception.
Using the t3 protocol the program works fine, but that would require the 25Mb weblogic.jar on all clients, which is unattainable for us.
Any ideas how this situation can be corrected?
-Allard Siemelink--
Apurb Kumar
Developer Relations Engineer
BEA Support

The icon for Norton Identity Safe has disappeared and I can't figure out how to get it back on my toolbar.

I use Norton which has a feature called "Identity Safe." In the old version of Mozilla, the icon for this feature was available on my toolbar. Now that I have converted to the latest version of Firefox, the icon has disappeared and I cannot figure out to get it back. I can still activate the Identity Safe by opening Norton, but I want to restore the shortcut.

Symantec have made an update for their add-ons to work in Firefox 4, but they only listed them as compatible with Firefox 4.0, they need to update them to let them work in Firefox 4.0.1, they have indicated this will be happening soon. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808

I installed Identity Finder, and I have to enter a password to get into Firefox, which I like. However, even though my settings are set to "Show my windows and tabs from last time," I have to manually click on each one to add in a new tab each time. An

I installed a security program called Identity Finder whick requires a master password for Firefox on my laptop, which I like. However, even though my settings are to "Show my windows and tabs from last time," I have to manually add each link in a new tab each time. Any suggestions? Thanks in advance.

Pure speculation, but maybe that Identity Finder program is deleting your browsing history which is how Firefox restores tabs and windows from the previous session. Check with technical support for that program or look at the manual.

Caller display won't work since i've swooped to BT

I have a PANASONIC cordless trio phone set, caller display worked fine untill we swooped to BT Broardband and Phone package. I have checked the phone line without the filter still no display can anyone help.
Solved!
Go to Solution.

Hi Cobra,
It is possible the caller display facility hasn't followed you across from your previous service providor.
You can check this by dialling *#234# this will tell you if the service is active (caller identity will be displayed) or not (caller identity will not be displayed).
If not active try dialling *234# to activate, if the message says 'this service is not available' (or something along these lines) the the facitliy is not rented on your account and you will have to call BT to arrange or log on to BT.com to order through the net.
The fault teams on 0800800151 can order this or you can call the sales teams directly on 0800800150.
hope that clears it up for you :-)

Caller Display

Hope some one can help. Have had caller display for some time, bought a new phone and it will not work. Reverted to old phone and caller display worked for a while and then stopped working. We have taken both phones to friends who have caller display and caller display worked on both old and new phone. Have tried #234# and it states caller identity will not be displayed. Also answer phone will not work on either phone but work at friends. Have removed ASDL filter and installed i-plate with no effect. Phone at times rings intermittently. Have reported fault and automatic system says there is no fault on the line. Any suggestions gratefully received.

#234# disables so it will not be displayed, dial *234# to enable it again.
Summary
CALLER DISPLAY may be switched on with the command *234#, you check it with *#234# and you switch it off with #234#.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Error when calling ejb.create() call

Hi Folks,
I am trying to create a simple CMP bean with J2EE1.4 but when I call ejb.create I get the following exception :-
Exception in thread "main" java.rmi.ServerException: RemoteException occurred in
server thread; nested exception is:
java.rmi.RemoteException
at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
n(Unknown Source)
at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at com.titan.customer._CustomerHomeRemote_Stub.create(Unknown Source)
at Client.main(Client.java:20)
Caused by: java.rmi.RemoteException
at com.sun.enterprise.iiop.POAProtocolMgr.mapException(POAProtocolMgr.ja
va:195)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:73
9)
at com.titan.customer.CustomerBean_986018080_ConcreteImpl_RemoteHomeImpl
.create(CustomerBean_986018080_ConcreteImpl_RemoteHomeImpl.java:38)
at com.titan.customer._CustomerBean_986018080_ConcreteImpl_RemoteHomeImp
l_Tie._invoke(Unknown Source)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tchToServant(CorbaServerRequestDispatcherImpl.java:648)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tch(CorbaServerRequestDispatcherImpl.java:191)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
Request(CorbaMessageMediatorImpl.java:1655)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(CorbaMessageMediatorImpl.java:1514)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(C
orbaMessageMediatorImpl.java:896)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.call
back(RequestMessage_1_2.java:172)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(CorbaMessageMediatorImpl.java:668)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatc
h(SocketOrChannelConnectionImpl.java:352)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.read(So
cketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.ReaderThreadImpl.doWork(ReaderThreadI
mpl.java:73)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.
run(ThreadPoolImpl.java:382)
Bean code :-
package com.titan.customer;
import javax.ejb.EntityContext;
public abstract class CustomerBean implements javax.ejb.EntityBean {
public Integer ejbCreate(Integer id) {
setId(id);
return id;
public void ejbPostCreate() {
//abstract methods
public abstract Integer getId();
public abstract void setId(Integer Id);
public abstract String getLastName();
public abstract void setLastName(String lastName );
public abstract String getFirstName();
public abstract void setFirstName(String firstName);
public void setEntityContext(EntityContext ec) {}
public void unsetEntityContext() {}
public void ejbLoad() {}
public void ejbStore() {}
public void ejbActivate() {}
public void ejbPassivate() {}
public void ejbRemove() {}
ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar version="2.1" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
<display-name>CustomerBean</display-name>
<enterprise-beans>
<entity>
<ejb-name>CustomerBean</ejb-name>
<home>com.titan.customer.CustomerHomeRemote</home>
<remote>com.titan.customer.CustomerRemote</remote>
<ejb-class>com.titan.customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>false</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>CustomerBean</abstract-schema-name>
<cmp-field>
<description>no description</description>
<field-name>firstName</field-name>
</cmp-field>
<cmp-field>
<description>no description</description>
<field-name>id</field-name>
</cmp-field>
<cmp-field>
<description>no description</description>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>id</primkey-field>
<security-identity>
<use-caller-identity/>
</security-identity>
</entity>
</enterprise-beans>
</ejb-jar>
sun cmp mapping
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-cmp-mappings PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 OR Mapping //EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-cmp-mapping.dtd">
<sun-cmp-mappings>
<sun-cmp-mapping>
<schema>CustomerBean_jar</schema>
<entity-mapping>
<ejb-name>CustomerBean</ejb-name>
<table-name>CUSTOMERBEAN</table-name>
<cmp-field-mapping>
<field-name>firstName</field-name>
<column-name>CUSTOMERBEAN.FIRSTNAME</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>id</field-name>
<column-name>CUSTOMERBEAN.ID</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>lastName</field-name>
<column-name>CUSTOMERBEAN.LASTNAME</column-name>
</cmp-field-mapping>
</entity-mapping>
</sun-cmp-mapping>
</sun-cmp-mappings>
sun-ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 8.0 EJB 2.1//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_1-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>CustomerBean</name>
<unique-id>579688304</unique-id>
<ejb>
<ejb-name>CustomerBean</ejb-name>
<jndi-name>CustomerBean</jndi-name>
</ejb>
<pm-descriptors/>
<cmp-resource>
<jndi-name>jdbc/Vineeth</jndi-name>
<create-tables-at-deploy>true</create-tables-at-deploy>
<drop-tables-at-undeploy>true</drop-tables-at-undeploy>
<schema-generator-properties>
<property>
<name>use-unique-table-names</name>
<value>true</value>
</property>
<property>
<name>java-to-database</name>
<value>true</value>
</property>
</schema-generator-properties>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Can someone please help me out with this...this is a bit urgent..
Thanks

It seems that u need a ejbPostCreate with the same parameters as ejbCreate:
public Integer ejbCreate(Integer id) {
setId(id);
return id;
public void ejbPostCreate(Integer id) {
}

Caller identity?????

Similar Messages

Maybe you are looking for