Callers cannot hear me, nor can I hear them.  Is this fixable?

Although all functions of the phone work, callers cannot hear me, nor can I hear them.
The phone was dropped, is this fixable.  All other speakers work, music, recording, etc.
Dfickeria

hardware troubleshooting http://support.apple.com/kb/TS2802

Similar Messages

  • On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode, I can't hear anything nor can anyone hear me! Help. Please.

    On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode! I can hear anything through the ear piece or via a headphone. Nor can people hear me when I call. I must be doing something wrong, but what?

    Hello Angela,
    Thank you for the details of the issue you are experiencing with sound on your iPhone.  I recommend the following steps for an issue like this:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT201272 I changed my apple ID and password because my credit card was hacked. Now the apps that I purchased with the old ID cannot be updated, nor can I sync them to my new iPhone. Is there a way I can retrieve apps that I purchased?

    I have a different apple ID and password and now I am unable to sync my apps to my new iPhone. How can I retrieve some of the apps that I purchased using the old ID?

    Go to Settings>Store (or iTunes and Appl Store) and sign out and sign back in. If problem go to Settings>iCloud and make sure you are signed into the new iCloud account. You may have to create a new iCloud account.

  • I get phone calls but I cant hear them nor can they hear me, voicemail works fine

    phone dials and connectd to both incoming and outgoing calls but I cannot hear them nor can they hear me, voicemail works fine

    Did you already try the suggestions mentioned here? iPhone: Can't hear through the receiver or speakers

  • When opening Powerpoint, the file opens outside of the screen, and I cannot use it, nor can I open a new ppt. How do I rectify this?

    When opening Powerpoint, the file opens outside of the screen, and I cannot use it, nor can I open a new ppt. How do I rectify this?

    Usually the Window menu allows you to adjust window placement in Microsoft Office products.
    If not, connect an external display or projector and change the resolution to the maximum.   
    Save the document with the window residing on the main screen with the Dock.
    That will force it to open on the main screen in the future.

  • I downloaded the newest version of firefox today 8/16/11 and now I cannot use Evernote (nor does clipmarks work from before) this is unacceptable. How do I return to the earlier version of firefox? Thank You, Carol Roberts

    I downloaded the newest version of firefox today 8/16/11 and now I cannot use Evernote (nor does clipmarks work from before) this is unacceptable. How do I return to the earlier version of firefox? If there is no way to do this, then I will have to use internet explorer so I hope you can help me with this. Thank You, Carol Roberts

    Until Evernote updates their add-on to mark it compatible with Firefox 6, you can use the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter] to try re-enabling it yourself.
    You can also downgrade to a previous version of Firefox from [https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ this archive], but please be warned that some old versions of Firefox have known security bugs that are fixed in later versions. See also: [[Installing a previous version of Firefox]]

  • Pdf files will no longer load in Safari on my macbook pro.  They don't appear in the safari window, nor can I download them directly.

    pdf files will no longer load in Safari on my macbook pro.  They don't appear in the safari window, nor can I download them directly.  Can anyone help?

    Delete the following item, then quit and relaunch Safari:
    /Library/Internet Plug-ins/AdobePDFViewer.plugin

  • I tried to create a new google calendar in ical, but they did not show up, I tried this several times. Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can i clear them from this list?

    I tried to create a new google calendar in ical, but they did not show up, I tried this several times.
    Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can I clear them from this list?

    See https://bugs.downthemall.net/ticket/2147
    Google Search Bug
    Reported by: openid:nathan wride Owned by:
    Priority: major Milestone:
    Component: Polish/Usability Version: 2.0.10
    Keywords: Google search instant save bug Cc:
    Operating System: Windows
    Description
    Hi Guys
    I have found a bug/annoying thing that occurs frequently on google. When searching, DTA trys to download the search...
    I'll try to attach a screenshot.
    Attachments
    [https://bugs.downthemall.net/attachment/ticket/2147/Screenshot.png Screenshot.png] Download (113.0 KB) - added by openid:nathan wride 4 weeks ago.
    The screenshot that shows the bug.

  • When people text me pictures to my iphone5, I can not open them.  This was not a problem until I downloaded iOS 6.1.3.  I also can't open attachments from e-mails sent to me on my phone.

    When people text me pictures to my iphone5, I can not open them.  This was not a problem until I downloaded iOS 6.1.3.  I also can't open attachments from e-mails sent to me on my phone.

    Try a reset hold home/sleep buttons until Apple logo appears
    If that does not improve try a restore
    http://support.apple.com/kb/HT4137
    For your information
    We are NOT Apple here we are all users helping other users
    so emotion is ignored

  • Phone is not getting signal to make calls, sometime it works but not for the most part.  I can hear callers at times but they can not hear me.

    Hello.
    Looking for help on how to get a better signal when receiving and placing calls.  Phone got a little wet and is having hard time placing calls and receiving call.  Calls are breaking up most of the time but some times I have 4 bars and phone calls goes through just fine. Noticed phone is having troubling connecting to towers.  Get a call but caller can not hear me when I have only one bar showing on phone.  Phone does hit 4 bars sometime and phone call is clear.  Any suggestion., new phone still learning how to use.   Should I try to reset to factory settings???  Have read lot of negative comments on the web about doing this.  Trying all options before going to the Apple store.
    Thanks for any help or advice.

    I ended up getting a new phone, straight through Apple.  I called their technical support and went through all he basics again and they decided to replace it.  Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours),  I called them back to inform that there was no change, so they set up the order.
    I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway).  Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent.  I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
    Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something.  Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

  • Can't hear caller/they can't hear me

    WARNING FOR ALL PRE OWNERS:
    For the third time, I've experienced a problem with my Pre that I can answer or place a call, but the other end can't hear me, and I can't hear the other person.  This is a common problem with the Palm Pre.  It seems to be related to using the smartphoneearphone plug for a headset or to hook up external speakers to listen to music/podcasts.  My wife and I purchased Pre's on the second day after public release.  I used to love the phone for it's simplicity and functions, but yesterday I had to return to the Sprint store to have my 4th Pre replaced.  One had a different problem, but the other two had the same issue.  When I returned home from the Sprint store, I discovered my wife has the same problem (she's only on her 3rd phone, however).  Palm should really consider fixing the software/hardware problem--the Sprint store cannot repair on-site.  A replacement (reconditioned) phone must be shipped to the store, necessitating 2 trips per problem; a 30-min drive for me.  An alternate solution might be for Palm to put all its Pre owners on an automatic replacement cycle where the company automatically ships a replacement Pre to every own approximately every 6 - 8 weeks, since that seems to be the mean time between failures for this attractive appearing, but extremely poor quality, unreliable handset.  What good is it to have a smart phone that you can't use to hear/talk when making calls.  I've owned Palm 3-Com PDA devices since 1997, and Palm Treo 700s and 800WMs.  I've owned Palm stock for 4 years, but I'm telling you that when my 4th replacement phone (5th phone, counting my original purchase) arrives Tuesday, I'm immediately replacing it with a non-Palm phone and never buying another Palm product.  I am EXTREMELY disappointed. 

    I'm reposting my reply to this issue in another thread, still very relevant to the situation at hand:
    TreoAide wrote in this thread:
    This is an issue that has been addressed previously, at least two other webOS threads and likely numerous palmOS and WinMo threads also:
    http://forums.palm.com/t5/webOS-Software/HUGE-BUG-Pre-stuck-on-headphone-mode-help/m-p/244772
    http://forums.palm.com/t5/webOS-Software/Speaker-not-working-after-unplugging-headphone/m-p/297152
    This is something that nearly every manufacturer of portable devices deals with to one extent or another. Pocket lint and debris find their way into the headset jack and cause the device to permanently assume a headset is connected.
    The only way to fix this is by cleaning out the headset jack. Either by inserting/removing a headset connector repeatedly, or as suggested in this support article: "Unplug the headset if it is plugged in. Blow into the headset jack to clear out any debris. Firmly plug in the headset."
    HOWEVER if you choose to do that, I advise EXTREME caution, as you could accidentally get moisture into the jack, making the problem worse.
    Our moderator tagz also made a suggestion in the first forum thread I referred to earlier, however again, use extreme caution when putting ANYTHING into the jack. Also, an earlier suggestion to have Pandora or some other music playing on the Pre while adjusting the jack provides good feedback for when the problem resolves.
    One idea I've had and heard others suggest is a cover of some sort. Now, this would be an excellent opportunity for someone to make a lot of money with a headset cover designed for the Pre, but until then, try a Google search for "headset jack dust cover" and you'll see products made for other devices which should fit your Pre quite nicely.
    Hope this helps,
    TreoAide

  • I hear caller but can't hear me

    After upgrading to ios6 I can make calls and hear the other person but they can't hear me. I got it to work briefly when I started syncing it with iTunes but once I disconnected it stopped working again.

    I have the same issue in my home. If my phone is on wireless, i hear the caller but they do not hear me...including the lady at att.  If I switch the phone to 3g, after reset network setting, they can hear me but the internet on my phone does not work.  When I switch to wireless, the internet works but the callers no longer hear me.  Att is running a check and gave me a ticket number but clearly this is an apple iphone 4 ios6 issue.  Please apple help us.  Having a phone and not being able to use it is ridiculous.

  • Hearing Aid connection, can't hear the iPhone ring.

    Hearing Aids and iPhone4
    Hi, I have a Phonak Audeo Smart hearing aid, connected via a Phonak iCom Bluetooth system to my iPhone 4.  The bluetooth pairs and connects without a problem, I can hear the call and hang up via the main iCom button, but I cannot hear the call ringing in and so I don't know when I receive a call and don't know how to answer it.  The connection seems to be made automatically but I don't know that it has happened. I have the latest IOS, I've tried different iPhone ring tones and also tried silent mode so the phone itself doesn't ring at all, but nothing seems to work. Any ideas?

    AND I ALSO CANNOT UPDATE MY APPS??     DOES ANYBODY KNOW HOW TO SOLVE THE SPEAKER AND APP PROBLEM???
    juliafromky wrote:
    My speaker on my iPhone 4s stopped working. I can't hear my phone ringing, music, apps or use the speaker when having a call.  I can still make and take calls when I see them calling but can't hear the phone ring.
     

  • Can't hear calls/ people can't hear me!! Proximity sensor NOT WORKING!

    Ok so my iphone was fine last time I made a call on it which was last night. I have an incoming call and I can't hear the person and they cant hear me, but when I switch to the speaker phone it works! In addition, I noticed that since the proximity sensor does NOT turn the screen off when I had the phone to my head... Went to the apple store and scheduled an appointment for wednesday, but I guess i'm stuck until then.

    I had this problem a while ago, and people could hear me but I could not hear them. The problem turned out to be with the headphone jack; the phone thought that my headphones were still plugged-in. Oddly enough, the only way they started working again was from being held in my hand while I was running to answer my land-line phone. I guess the jarring movement released the jack. This has only happened once more.
    I am careful now to pause my music before unplugging the headphones. (No idea if that helps or not)

  • Cannot see SSID nor can I use Join Other network with Graphite BaseStation

    I got a hand me down Graphite Basestation. I can administer it via Ethernet, and I can get out on the Internet that way, but I can't join the Basestation wirelessly. None of my computers can see the SSID nor can I used the Join Other Network to join. Any idea why?
    Thanks!
    Sherman

    Correction - I mean Snow Basestation, not Graphite

Maybe you are looking for

  • How to set maximum number of data points displayed on waveform chart?

    I have a waveform chart set to x-autoscale, but after about 1000 data points, it begins to scroll again. How can I display all of the data points being collected, say 2000 points?

  • Configure ITEM FIELDS (Class /SAPSRM/IF_MDF_ITM_DYN_CONTROL) in SRM 7.0

    Hi, I am using the class /SAPSRM/IF_MDF_ITM_DYN_CONTROL with the common signature IV_OBJECT_TYPE IV_FIELD_NAME IS_HEADER IS_ITEM IS_ADD_DATA CS_METADATA to control my fields within SRM on ITEM LEVEL. Question: I have one Shopping cart with two positi

  • 'osql' is not recognized error

    Hello all, I have been trying to get my server to switch from the standard pointBase DB over to using a fresh SQL2000 DB on another box. I am using a Win2K box and am running the WL7.0 platform. I have changed the settings in the config.xml and db_se

  • Generating two pulse trains with on a PCI 6602 (2 CWPulse)

    I am writing an application that should generate 2 pluse trains. I'am using ComponentWorks 3. I've tried to use 2 CWPulse but after configuring the 1st, i cannot start the other one because "too many controns are configured for this DAQ device". Do y

  • Convert View to viewClass:Class

    Hi. Because popView () does not work correctly in iOS, I decided to write my own class. Unfortunately, I do not know how to convert: var MyView: View = navigator.activeView; and in the next view: navigator.pushView (MyView) there is a conflict becaus