Callers cannot hear me when answering calls...

Hello,  I just received my Blackberry curve 8330.  All of a sudden my callers cannot hear me when I place or receive calls. Any suggestions?

Try checking your volume. 

Similar Messages

  • Callers cannot hear me when?  I can hear them.

    callers cannot hear me when using the phone. I can hear them and.

    I have the exact same problem. Tried restoring to originals without last backup and the problem persists.

  • At times people cannot hear me when I call.  Is there a setting I should check?

    At times people cannot hear me when I call.  Is there a setting I should check?

    Having the same issue with iphone 4s, I can call another iphone, a landline another cell phone and I cannot hear the person and they cannot hear me unless I toggle the spearker button on the iphone... just got apple to exchange for a new 4s and there is no difference, I am still having the issue, on top of that, Apple store even, though the girl experienced the issue with me in the store, told me they could not verify the problem and then noted on my account it was an unverified problem exchange when they changed my phone.  I have yet to book another appointment since the people at the apple store made me feel like I was lying.  yet I see over the net a lot of other people are having the issue, and as I was walking out of the store I over heard another man explaining the same issue to another apple employee...............

  • Nokia N95 8gb cannot hear anything when I call out...

    When making calls to other mobiles I cannot hear the ringing or the other person but they can hear me. This is very frustrating and costs me a lot of money because it takes four calls to get it to work correctly.
    I have tried switching to loud speaker and that does not work. I have the latest software.
    There is no noise at all, no ringing, no talking from the other side. The person on the other side can definately hear me though.
    It is weird because it works fine on the third or fourth try.
    Please help, I dont want to send my phone away to be repaired unless necessary.

    hi,
    you might want to try the following 1st...
    re-start your phone, just turn it off and turn it on again
    if that doesnt help then you can try this more drastic measure, but 1st make a backup of your phone's content by going to the memory card and make backup and/or use Nokia PC suite to make a backup, then try the Soft Reset or Hard-Reset: Remember to backup specially for hard-reset, all your phone's content will be erased.
    FOR SOFT-RESET:
    - at Standby Screen type-in => *#7780#
    It will ask for “Restore all phone settings-phone’ll restart….”
    Then it asks for security code enter factory default => 12345
    FOR HARD-RESET:
    - at Standby Screen type-in => *#7370#
    It will ask for “Restore all phone settings-phone’ll restart….”
    Then it asks for security code enter factory default => 12345
    if this doesnt help contact Nokia Care Point-> http://europe.nokia.com/A4388379
    if you are not comfortable with the hard-reset and it is easy for you to go to the nearest Nokia Care Point, then just go there for help...

  • TS1630 people cannot hear me when they call me in my iphone, what is wrong? it's either I need to keep tapping the phone or they will not hear me

    I am having difficulty with Iphone4.  For two weeks now, when people call me or I call them, there are times that they cannot hear me.  At times I need to tap the phone and it will work but most of the time it does not.  What is the problem?  Is this a major problem?

    Hello arendss1,
         Thank you for sharing your audio concern with your iPhone 4S! As your wireless provider, we want to make sure that you are able to get the maximum usage out of your device! I would like to partner with you so we can get this issue resolved once and for all! May I ask is there any physical or liquid damage on the device? Also, what software version do you have on the phone? Below are some steps to try to resolve the audio issues.
    Turn off bluetooth and wifi in the Settings Menu.
    Verify that the headset jack is clean.
    Adjust the volume from the Settings menu. (Settings > Sounds > Ringer and Alerts)
    Confirm that "Change with Buttons" is on.
    Perform a soft reset by pressing & holding the home key & the sleep/wake key for 10 seconds.
          Once you have tried these steps then please retest to see if the audio has returned to the device. I would also like to suggest test the device on speaker phone and with a wired earpiece as well. If the issue persist then please advise of any changes as all new information may prove to be beneficial in achieving a resolution.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Callers cant hear me when they call me --- Please help

    for some reason anyone who calls me they cant hear me but I can hear them .. can anyone help ?

    I have the same problem!
    Callers can't hear me when i make a call AND when someone calls me
    When i plug my headphones to losten to music, he sound is very bad (it's like *****) but the iPhone's speakers are working very good.
    I made the full restore.
    What's the problem??

  • Callers cannot hear me when I use LG Accolade

    When I call someone or they call me, the caller can barely hear my voice. Master volume is set to high and I can hear them just fine.Just started yesterday! Any suggestions as to what is wrong?

    Thanks for the additional information, queen50!
    Please try removing and reinserting the battery: http://vz.to/1EZ52Ow.  Let me know if the audio improves after reinserting the battery.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • What do i do if callers cannot not hear me when I call them

    After iOS 5 update, callers cannot hear me. I tried the voice recorder and it does not pick up my voice. also I used Tango and the caller could hear me but with Skype they could not. the only way callers can hear me is if I have the phone on speakerphone. I have not tried bluetooth or headphones. I have reset, restored etc.

    Remove all screen protectors and cases and try your phone.
    Basic troubleshooting steps are restart, reset, restore (first from backup, then as new).  If these steps fail, you have a hardware problem.
    Out of warranty exchange is $199 in the US.  Some Geniuses have been known to waive the exchange fee if you're really close to your expiration.  If you go in NOT expecting this, perhaps you might get lucky.

  • I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4.  Are there any fixes?

    I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4.  Are there any fixes?

    Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device.  Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

  • Screen cannot lock or go black when answering call

    This make me always touch the button of the screen when answering calls...is it the sensor problem?

    I have the same problem could some one tell us what we. Should do ?

  • Callers cannot hear me after Ios8 update

    After I updated to iOs8, i immediately began getting a message that this charger or accessory is not compatible with this Iphone. However, nothing was plugged in! After a few hours the message stopped. But now callers cannot hear me, although I can hear them. Callers are able to hear me when I put the speakerphone on, which is not an acceptable solution to the problem, i do not want to use speaker phone for every call. I have try the following
    - Power the device off then back on
    - Hard reset the device using home/sleep buttons
    - Checked the headset jack for debris
    - Adjusted the volume several times while on a test call
    - reset the network settings
    - toggled noise cancellation option while on a test call
    Probably more than what's listed, i've been non stop for more than 24 hours! I have googled for a solution, but I am not seeing others with the same issues as mine after updating to iOS8, some have had the same issue with previous updates of different iOS versions. And I have tried all of the solutions that they were given. I feel like I have tried everything.
    I do not want to downgrade back to iOS7, I'm not sure I even can.
    So, any other suggestions? Should i just take the Device to my local Apple store and let them sort it out? I have an Iphone 5s that is only a few months old (probably less than 6)
    Thank you for any help!

    If never jailboken/hacked, restore using iTunes, first also restoring a backup and if needed as new (without using a backup)
    Use iTunes to restore your iOS device to factory settings

  • Droid 2 global at&t callers cannot hear me

    I have a droid 2 global.  Callers who have AT&T iphones (and I suspect all AT&T phones) cannot hear me when I answer their calls.  If I call them back, my phone works fine.  What do I do?

    There could be several factors. We will need to ask you a few troubleshooting questions to help find the root cause of the issue. Since it does not appear to be related to a device issue, a trouble ticket needs to be submitted. Our network technicians will then to investigate. We encourage you to contact us whenever you are experiencing an issue. You would call us from an alternate phone at 800-922-0204 and select option 3. For your convenience, we will send you a message to further assist you. 
    Thank you,

  • I have a problem with my I phone usually have cannot hear clearly the person calling me,what should i do about it?

    I have a problem with my I phone usually have cannot hear clearly the person calling me,what should i do about it?

    Hi - it depends on how old your iPhone is. Is it fairly new or if its less than 28 days old you can bring it back to the store if bought through one of the common networks. I had an earpiece problem when I bought mine after just 10 days or so, I couldn't hear anyone through the earpiece and exchanged in store for Free.

  • Receiver cannot hear me in a call

    Since I have updated to iOS 6.0.1 on the iPhone 4 the receiver cannot hear me when I make a call. I bought the phone second hand 4 months ago and has worked fine until now. What is happening? Is this a problem with the software. I have soft reset, hard reset and restored the phone with the problem remaining. I am not able to call support for obvious reasons and I cannot go to an apple store as I am away with work. Anything anyone can suggests?

    Try to toggle "mute" button. It may help.

  • Callers cannot hear me on phone

    I have a new BB 8330...less than 30 days usage.  It has been working fine.  However as of today, callers cannot hear me, as if the phone was on "mute".    I toggle the mute button on and off, but that has not resolved the problem of not being heard.   Any suggestions or ideas what I am doing wrong? 

    This might seem simplistic but try it as it can do no harm.
    For reasons known but to RIM they don't supply a dust plug for the headphone/headset jack.  It is quite common for a bit of debris to find its way into the jack.  The device then "thinks" you have a wired headset plugged in and audio is sent to the headset even though it is wrong.
    Hold your Curve firmly with the opening facing down and either using a jet of canned air or your breath blow across the opening.  Do this two or three times.  After doing that holding your device firmly tap the opposite side gently while the opening is still facing down.
    All too frequently we slip the good old BB in a pocket and pocket debris gets into the opening.  Try it.  It might just solve your problem.  When I was a forum administrator for another forum this was a common issue and solution.
    Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
    BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
    If there is a Theme on my Blackberry, Hedone it!
    If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
    Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
    If your issue has been solved, please mark the post that solved it for you!

Maybe you are looking for

  • Issue with SAP adapter

    Hello Experts, I am facing issue while sending multiple items to sales order BAPI. I have tested from the adapter xml seems to be correct but it throws an exception for multiple line item number. Do I need apply any fix? Please help in a critical sit

  • Missing package... it's been 2 months and still no "refund"

     Hi, Sometime in late March/early April, I filed a missing package report for a pair of headphones I ordered online. Two weeks later, I called up Best Buy about the status of the order, and was told that UPS did an investigation and concluded that th

  • Runtime engine can't load vi with lvdatetimerec.ctl

    Hello everybody, i have trouble with TS 3.5 / LV 11.0 I programmed a small vi that calculates the time difference between now and a time stamp. To pass the timestamp from Teststand i use a Control (lvdatetimerec.ctl) and the matching VIs to do the ta

  • How to open Crystal report 11 using the Visual c++ 6.0 code

    I am using Visual c++ 6.0.I can't open crystal report X1 from my vc++ application. The same code which I have used for crystal report 7.0 is using for crystal report X1.But it shows "Unbale to load the report". Please help me out. The code snippet I

  • How to 'flatten' a varray

    Hi, I have a varray(3) of number and I would like a member procedure or function to return the 3 numbers as columns of a view definition. So, the object table looks something like CREATE TYPE COORDINATES_L AS VARRAY(3) OF NUMBER; CREATE TYPE THINGY A