Calling 3 different movies by one click, One after another.

Hi,
I have 9 small movies. I want to make a combo box and,
provide 3 options to choose from. But each option should call 3
movies ONE AFTER ANOTHER WITHOUT USER INTERFERENCE. I want movies
to stream one by one to save bandwidth and delay. Following is the
option for calling one movie by choosing one option but I want to
start 2nd and 3rd movie without user interference. How do I do
that?
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
[Bindable] private var swfDP:ArrayCollection = new
ArrayCollection([
{label:"Choose a Movie", data:""},
{label:"Movie1", data:"myMovie.swf"},
{label:"Movie2", data:"myMovie2.swf"},
{label:"Movie3", data:"myMovie3.swf"}]);
private function onComboChange(event:Event):void {
// => Check to see if swf location exists, if it does then
load the new swf.
(event.currentTarget.selectedItem.data != "") ?
loader.load(event.currentTarget.selectedItem.data) : "";
]]>
</mx:Script>
<mx:ComboBox dataProvider="{swfDP}"
change="onComboChange(event)" />
<mx:SWFLoader id="loader" width="800" height="600" x="200"
y="50" />
</mx:Application>

Similar Messages

Movies play one after another automatically?

In IDVD 8...can individual movies automatically play one after another without having to return to the menu to reselect the next movie and clicking on it?
I have 7- 3 min. movies I want to play together ...one after another...automatically in idvd08.

If I had $5 for every time that has been asked...
It can NOT be done in iDVD. It can be done in DVD Studio Pro.

Play movie's one after another?

Hey Mac-Lovers
I started my first project with iDVD. I made a menu with several movies located in a list. Now my question:
How may i play them movies one after the other? Now it's playing just one video and returning to the menu to select another, but that's not what I want. I want the DVD to play all movies.
Kind regards
Benny

Hi x
A. This can't be done in iDVD BUT DVD-Studio-Pro. But to a severe cost and steap
learning curve.
B. It can be faked. The Cost in this case is the reduced storing capacity of the
DVD to about half.
In iMovie You have to assemble the parts into one full movie. Add this to Your
iDVD project. Name it as "Play all" in iDVD menu.
If You want it to start a bit into the movie and cont. to it's end, just add
chaptermarks in GarageBand or iDVD (I think). (or in iMovie HD 6 if You use this)
Yours Bengt W

Ipods wont play music videos or movies continuosly(one after another)

i need help. i've looked online. okay, when i select a music video, it plays, but as soon as da video finishes, it comes back to the menu screen or repeat da same song over and over again. I want it to go to play another song, jus like in music mode. And yes,i've been to Settings ---> Repeat--> All.
but nothin seems to really work...
I truly appreciate ur help. Thanx 'gain.
dell Windows XP Pro

"i think there is a program that allows you to rip stuff from your ipod back onto your computer. you could try doing that and then put them back on your ipod. "
That program is called yamipod I think. Wouldn't recommend using it to "Rip" stuff off though.

Playing movies in Front Row one after another automatically?

I have a number of short video clips that I can watch with Front Row. However, every time a clip ends, I have to go and click “play” on the next clip and this is annoying. I am wondering if there is a way to make movies play one after another without stopping. Thanks for the help!

David,
Thanks for the help. I'm still thinking there must be SOME way to pull this off. It seems like Mac's can do just about anything if you take the time to figure it out. Why wouldn't the people who designed Front Row not add this feature? It doesn't make any sense. There has to be a way. Anybody else have any ideas?

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Wher

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Where are all the options I had in PS10? Also...Can I burn this to a DVD?

The changes have brought improvements but also drawbacks compared with the old slideshow editor.
The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

Playing movie clips one after the other

Hello, I am trying to figure out how to play several movie clips one after the other. Each clip has animation in it. When I drag the clip on the main timeline the timeline plays the frame but does not play the contents of the movie. how do I get it to play the contents of the first movie then play the contents of the second movie which is in frame 2 and so on?
Thank you

do you mean in the authoring environment you don't see nested movieclips play when scrubbing the timeline? if yes, that cannot be changed. if you used graphic symbols (instead of movieclips), you can see nested graphics play when scrubbing a parent timeline (if the parent timeline has sufficient frames).

How can I make my movies to play one after another automatically?

I couldn't find the settings to play all my movies one after another.
Any idea?

Given the number of threads bemoaning the lack of such features (mostly for music videos) and countless enhancement requests sent here:
http://www.apple.com/feedback/appletv.html
..and the lack of the facility being added in over a year make me think it's unlikely to ever happen but I'd love ot be proved wrong!
AC

When I try and open Microsoft Word 2011 documents they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens?

When I try and open Microsoft Word 2011 documents on my IMAC they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens. The documents open in rapid succession on their own and don't stop until I force close or after maybe 100 or more open I start getting the following message for each document attemting to open "This document could not be registered. It will not be possible to create links from other documents to this document" and then in paretheses the name of the document. After I click okay another trys to open. Any suggestions?

If you had multiple documents open and quit the app without closing all of the docs first, it will open them again when you launch the app. Open Word, and then close all the documents, you may be asked to save the document, if the document was already saved but you made changes to it before you quit the app, you may need to save the changes first, shorcut ( command and s keys). After you close all of the documents then quit the app and restart the computer. See if this works.

Run Jobs One After Another

I know this is possible, I'm not sure how to go about it using Oracle's Scheduler. I simply want to create a special "queue" that I can submit jobs to which will run one after another. After they run, then then are gone. There many be no jobs at anyone time, and then at other times I may submit 10 jobs to the queue. Currently when I submit jobs they all run parrallel, this is not what I want. I guess I don't understand why Oracle calls it a Job Queue when all my jobs run in parrallel and not in a queue as the name implies.
This is not say that I don't have other jobs which I would not want to send to this "queue". In other cases I would just want to submit the job and let it run right away and not wait on anything.
I'm currently using the DBMS_JOB package, which I'm pretty sure won't let me do what I want.
Any help would be greatly appreciated.
Thanks,
Joe

Here is and example that creates Resource Manager objects and
two job classes that will permit 1 and 3 jobs to
run in parallel. Note this will work in 11R1 and 10.2.4
Assumes user user scott/tiger exists.
-- Remove existing scheduler objects, jobs and classes
CONNECT / as sysdba
BEGIN
   DBMS_SCHEDULER.DROP_JOB_CLASS(
      JOB_CLASS_NAME => 'JOBQ_WIDTH_1_CLASS'
END;
BEGIN
   DBMS_SCHEDULER.DROP_JOB_CLASS(
      JOB_CLASS_NAME => 'JOBQ_WIDTH_3_CLASS'
END;
BEGIN
FOR I IN 1..30 LOOP
BEGIN
    SYS.DBMS_SCHEDULER.DROP_JOB(JOB_NAME => 'SCOTT.SERIAL_' || I, FORCE=>TRUE);
EXCEPTION WHEN OTHERS THEN NULL;
END;
END LOOP;
END;
BEGIN
FOR I IN 1..90 LOOP
BEGIN
    SYS.DBMS_SCHEDULER.DROP_JOB(JOB_NAME => 'SCOTT.PAR3_' || I, FORCE=>TRUE);
EXCEPTION WHEN OTHERS THEN NULL;
END;
END LOOP;
END;
ALTER SYSTEM SET RESOURCE_MANAGER_PLAN='';
set echo on
-- Remove previously defined resource plan, resource plan
-- directives, and resource consumer groups for this test
BEGIN
    -- Prepare the pending area
    DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA;
    DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA;
    -- Delete resource plan, its resource plan directives, and
    -- any associated resource groups
    DBMS_RESOURCE_MANAGER.DELETE_PLAN_CASCADE(
       plan => 'JOBQS_PLAN'
    -- Submit the changes
    DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA;
    DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA;
END;
-- Create resource manager objects
BEGIN
   DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA();
   DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
   DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP (
        CONSUMER_GROUP => 'JOBQ_WIDTH_1_GROUP',
        COMMENT => 'Consumer group to force jobs to execute in serial'
   DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP (
        CONSUMER_GROUP => 'JOBQ_WIDTH_3_GROUP',
        COMMENT => 'Consumer group to allow jobs to run in parallel 3'
   DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
END;
BEGIN
   DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA();
   DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
   DBMS_RESOURCE_MANAGER.CREATE_PLAN
      ('JOBQS_PLAN', 'PLAN TO SUPPORT JOBQS');
   DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
      PLAN => 'JOBQS_PLAN',
      GROUP_OR_SUBPLAN => 'JOBQ_WIDTH_1_GROUP',
      COMMENT=>'Associates with job class JOBQ_WIDTH_1_CLASS',
      CPU_P1 => 25,
      PARALLEL_DEGREE_LIMIT_P1 => 1,
      ACTIVE_SESS_POOL_P1 =>1
   DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
      PLAN => 'JOBQS_PLAN',
      GROUP_OR_SUBPLAN => 'JOBQ_WIDTH_3_GROUP',
      COMMENT=>'Associates with job class JOBQ_WIDTH_3_CLASS',
      CPU_P1 => 75,
      PARALLEL_DEGREE_LIMIT_P1 => 2,
      ACTIVE_SESS_POOL_P1 =>3
   DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
      PLAN => 'JOBQS_PLAN',
      GROUP_OR_SUBPLAN => 'OTHER_GROUPS',
      CPU_P1 => 0,
      CPU_P2 => 100,
      COMMENT=>'Required'
   DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
   DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
END;
-- Create scheduler classes
BEGIN
   DBMS_SCHEDULER.CREATE_JOB_CLASS(
      JOB_CLASS_NAME => 'JOBQ_WIDTH_1_CLASS',
      LOGGING_LEVEL => DBMS_SCHEDULER.LOGGING_FULL,
      LOG_HISTORY => 5,
      RESOURCE_CONSUMER_GROUP => 'JOBQ_WIDTH_1_GROUP',
      COMMENTS => 'Force jobs to run in serial, through plan JOBQ_PLAN and group JOBQ_WIDTH_1_GROUP'
END;
BEGIN
   DBMS_SCHEDULER.CREATE_JOB_CLASS(
      JOB_CLASS_NAME => 'JOBQ_WIDTH_3_CLASS',
      LOGGING_LEVEL => DBMS_SCHEDULER.LOGGING_FULL,
      LOG_HISTORY => 5,
      RESOURCE_CONSUMER_GROUP => 'JOBQ_WIDTH_3_GROUP',
      COMMENTS => 'Allow up to 3 jobs in parallel, enforced by plan JOBQ_PLAN and group JOBQ_WIDTH_3_GROUP'
END;
connect / as sysdba
grant execute on jobq_width_1_class to scott;
grant execute on jobq_width_3_class to scott;
begin
dbms_resource_manager_privs.grant_switch_consumer_group('scott','JOBQ_WIDTH_1_GROUP',false);
dbms_resource_manager_privs.grant_switch_consumer_group('scott','JOBQ_WIDTH_3_GROUP',false);
end;
alter system set resource_manager_plan='';
connect scott/tiger
begin
for i in 1..30 loop
sys.dbms_scheduler.create_job(job_name => 'scott.serial_' || i,
      job_type=>'plsql_block', job_action=>'dbms_lock.sleep(2);',
      job_class=>'jobq_width_1_class',
      enabled=>true);
end loop;
end;
begin
for i in 1..90 loop
sys.dbms_scheduler.create_job(job_name => 'scott.par3_' || i,
      job_type=>'plsql_block', job_action=>'dbms_lock.sleep(2);',
      job_class=>'jobq_width_3_class',
      enabled=>true);
end loop;
end;
/-- The par3_90 job should finish about the same time as the serial_30 job since
-- we run 3 jobs in paralled and serial respectively.
-- check user_scheduler_job_run_details for after the test completed to verify.

How to play two presentations from the DMP one after another and looping

Can anyone help me on this.I want to play two presenations one after another and looping from the DMP.

Semuhtu,
The easiest solution for looping two or more DMD presentations
is to create a nested playlist within DMD. You simply
create a master presentation and add a playlist to this
presentation. Add the desired presentations to this playlist
and then schedule or send the Action to the DMP(s) to play
the Master Presentation. The 2 or more child presentations will
play and loop until you stop it manually.
Summary of Tasks
* Using DMD create Presentations (2 or more) that you would like
to display on the DMP-Display(s).
* After the presentations are created, you will need to find out
what the URL addresses are for each presentation. Using the
"Actions" drop down on the DMM-DMP Manager screen, you select
a DMP and send the Presentation to the DMP. Once the DMP displays
the presentation, access the DMP-DM Web admin page and copy the URL
address in the "Startup URLs-->Browser" field.   Repeat this process
for each DMD presentation that you want to loop.
For example:
http://dmm.company.com:8080/xTAS-core/appgen/clad/clad_95_.htm
http://dmm.company.com:8080/xTAS-core/appgen/clad/clad_96_.htm
and so on...
* Another parameter or variable that you will need to find out is
the duration of your DMD presentation(s). Some Presentations may be
a slideshow of images and some may contain videos. Your will need to
play each presentation on the DMP to determine the duration length of
each presentation that you will add to the looped playlist.
* Create a Master presentation using DMD. In this presentation, you will
create add a "Playlist" to the presentation by selecting the Playlist
button-drop down. Select "All Media Types" and a Playlist object will
be added to the Master presentation.
- Double-click on the object to add content
- Select "Add URL" button in the Playlist Content window.
- Fill in the required fields (URL Title & Link) in the "Add URL"
    window. Repeat the process for each presentation that you want
    to add.
- Set the Duration for each item in the Playlist. Select the Item
    in the list and then DOUBLE-CLICK on the "Planned Duration"
    field and edit the time to desired duration. Repeat process for
    each item.
- Save Master Presentation
* Schedule or use the "Actions" drop down on the DMM-DMP Manager screen
send the Master Presentation to the DMP(s). The Playlist will play and
Loop after the last item in the Master Playlist.
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

Invoking 2 SQL statements one after another?

Hi,
Is it a good idea to invoke to 2 SQL statements one after another using the same connection & statement object? Some thing like this:-
method(){
String insertSql="insert into employee(Name,Age)values(?,?);
Connection conn=null;
PreparedStatement pst=null;
int insertRows=0;
ResultSet rs=null;
try{
conn=getConnection(); //will get the connection object
if(insertRows==0){
pst=conn.preparedStatement(insertSql);
pst.setString(1,"Jason");
pst.setString(2,"30");
insertRows=pst.executeUpdate();
conn.commit();
if(insertRows>0) {
pst=conn.createStatement("select * from employee");
//retrieving the data from the same table
rs=pst.executeQuery();
while(rs.next()){
System.out.println("The name is::"+rs.getString(1)+ " "+rs.getString(2));
}catch(Exception e){
}finally{
try{
if(pst != null) {
pst.close();
pst = null;
if(rs != null) {
rs.close();
rs = null;
if(conn != null) {
conn.close();
conn = null;
}catch(Exception e) {
e.printStackTrace();
Here one more thing is that i want the insertSQL statement to be invoked only once that is in the beginning and the next time the method() is called it should skip the insert block and should only retrieve the data using "select * from employee". How to do it? I tried with few options nothing works.. Please do provide a solution for this... It is really urgent.
Thanks

Is it a good idea to invoke to 2 SQL statements one after another using the same connection & statement object? I think what you're asking is if you need a new Connection and/or Statement object for every query. The answer is no. In fact, most applications pool Connections so literally thousands or millions of queries are done in the lifetime of a Connection. You can reuse Statements and PreparedStatements as well as long as you intend on executing the same query.

Songs Skip Forward One After Another/Sporadic and Out of Nowhere

I have an older IPOD 40g that skips through songs, one after another, without playing anything, and seems to do it in any mode, especially in overall Shuffle mode. I have the "shuffle Songs" feature on, but other than that, it has a pretty standard set up.
I have restored to the defaults, last week, and it started doing the wierd stuff again today.
Sometimes I have a hard time getting it to unfreeze and reset as well.
I appreciate any help.

Have you tried Party Shuffle? If you control click on a track, you can choose "Play Next In Party Shuffle". I often listen the way you're describing. I start listening in Party Shuffle (which I have set to select from a specific playlist). When I am reminded of another song, I select the song and then choose Play Next in Party Shuffle. And so on.
As for your second question, you could try moving your entire short playlist into Party Shuffle. Once that playlist was done, Party Shuffle would revert to it's normal selection criteria (you could set it to pull from your entire library or a specific playlist). Music would keep playing.
Can you tell I like Party Shuffle?

Instances are restarting one after another!

Hi There,
My instances are restarting one after another.
Is this the scheduled maintenance that was supposed to happen on Saturday, but for some reason is happening now?
Whats going on?
I have 24 instances and randomly the restart!

Hi,
From my experience, this issue may be caused by OS update,
As long as each of your roles has 2 or more instances then your service will
not experience downtime due to the adherence to upgrade domains. The blog at
http://blog.toddysm.com/2010/04/upgrade-domains-and-fault-domains-in-windows-azure.htmlhas
a great explanation of upgrade and fault domains, and why having 2 instances of a role is required to meet the 99.95% uptime SLA.
Hope this helps
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Displaying images in canvas one after another

Hi all,
I have a problem displaying images in canvas one after another. I am using for loop and when i run the application, all images run back in the and only finally only the last image gets displayed in the emulator. I also used thread.sleep(). But it din't work.
Here is my code:
// A canvas that illustrates image drawing
class DrawImageCanvas extends Canvas
Image image;
public void paint(Graphics g)
int width = getWidth();
int height = getHeight();
g.setColor(0);
g.fillRect(0, 0, width, height);
String images[]={"paint_2.PNG","radha.PNG","cute.png","design.png","flowers.png"};
for(int i=0;i<images.length;i++)
image = null;
System.out.println("/"+images);
     try
     image = Image.createImage("/"+images[i]);
catch (IOException ex)
System.out.println(ex);
g.setColor(0xffffff);
g.drawString("Failed to load image!", 0, 0, Graphics.TOP | Graphics.LEFT);
return;
if (image != null)
g.drawImage(image, width/2, height/2, Graphics.VCENTER | Graphics.HCENTER);
try
Thread.sleep(5000);
catch(Exception ex)
     System.out.println("the exception is.."+ex);
Help me and Thanks in advance.

See the code below : prefer the use of a Timer and a TimerTask instead of Thread.sleep().
showNotify (from Canvas) is used to launch the timer.
import java.io.IOException;
import java.util.Timer;
import java.util.TimerTask;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class DrawImage extends Canvas {
    Image image;
    String images[] = {"img1.png", "img2.png", "img3.png", "img4.png", "img5.png",
                        "img6.png", "img7.png"};
    Image[] tabImage;
    int imageCounter = 0;
    public DrawImage(){
        try {
            tabImage = new Image[images.length];
            for (int i = 0; i < images.length; i++)
                tabImage[i] = Image.createImage("/" + images);
} catch (IOException ex) {
ex.printStackTrace();
public void paint(Graphics g) {
int width = getWidth();
int height = getHeight();
g.setColor(0);
g.fillRect(0, 0, width, height);
image = tabImage[imageCounter];
if (image != null)
g.drawImage(image, width / 2, height / 2, Graphics.VCENTER | Graphics.HCENTER);
else{
System.out.println("null");
g.setColor(0xffffff);
g.drawString("Failed to load image!", 0, 0, Graphics.TOP | Graphics.LEFT);
protected void showNotify(){
Timer t = new Timer();
t.schedule(new PhotoSwitcher(), 5000, 5000);
private class PhotoSwitcher extends TimerTask{
public void run() {
if (imageCounter < images.length - 1)
imageCounter++;
else
imageCounter = 0;
repaint();
I hope this will help you !
fetchy.
Edited by: fetchy on 14 ao�t 2008 09:48

Calling 3 different movies by one click, One after another.

Similar Messages

Maybe you are looking for