Calling a function module when pressing a "F5 key" in the custom field
hi .
i have a report program , during the selection screen - if the user presses a " F5 key " it should call the z-function module.
how to achieve this.
This "F4" key it is performing - i want it in a " F5 key" ....please suggest.
regards
zg
Hi, if you have a report with the standard (generated) screen you only have the possibilities of F1 and F4 (Help and Value request). Otherwise you have to make your own screen and maintain the function keys. Succes
Similar Messages
-
Unable to call New Function Module when called thru Internet Service in ESS
Hi all,
I am using 4.6C.
What i want to do: We are attaching a new HTML Template to an iview in which we have a direct call to a newly created Function Module.(Direct call mean to say we are calling the FM thru Flow Editor of HTML template).
What error i am getting : After publishing all edited/created objects when we test it in portal page. It says :
ITS System Information
Flow Execution Failed
Your request could not be processed by the module provider.
The module provide returned following error message: Error retreiving parameters from context
You may check the trace files for more information.
Please guide to solution at your earliest.
Regards
ManishHi Bjoem,
Search the forum for tutorials and blogs...
Regards,
Anubhav -
Errors occurred during call of function module BUPR_EMPLO_DELETE
when distributing employee data from (HCM) to (CRM) there is an error that appears in relation with the settings for the Business Parner:
"Errors occurred during call of function module BUPR_EMPLO_DELETE
Message no. R11335
Diagnosis
The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
Within a LUW, the indicator must be consistently set or not set.
System Response
The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors."
This prevents CRM to be updated with the changes. Kindly help me on the same.Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti -
Error when call RFC Function module in R/3
Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter -
Type conflict when calling a function module (field length)
Dear All,
I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
node_mat_input TYPE REF TO if_wd_context_node,
node_mat_output TYPE REF TO if_wd_context_node,
material TYPE BAPIMATDET-MATERIAL,
itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
EXPORTING
material = material
PLANT = plant
VALUATIONAREA =
VALUATIONTYPE =
MATERIAL_EVG =
IMPORTING
MATERIAL_GENERAL_DATA = itab
RETURN =
MATERIALPLANTDATA =
MATERIALVALUATIONDATA =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.Hi Amit,
I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
node_bapi_material_get_de TYPE REF TO if_wd_context_node,
node_exporting TYPE REF TO if_wd_context_node,
node_material_general_dat TYPE REF TO if_wd_context_node,
node_importing TYPE REF TO if_wd_context_node,
lri_element TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
stru_c_material_general_dat TYPE if_componentcontroller=>element_material_general_dat.
DATA:
attr_material TYPE bapimatdet-material,
attr_plant TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute( EXPORTING name = `MATERIAL`
IMPORTING value = attr_material ).
node_importing->get_attribute( EXPORTING name = `PLANT`
IMPORTING value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
EXPORTING
material = attr_material
plant = attr_plant
" valuationarea = wd_This->Valuationarea
" valuationtype = wd_This->Valuationtype
" material_Evg = wd_This->Material_Evg
IMPORTING
material_general_data = stru_c_material_general_dat
" return = wd_This->Return
" materialplantdata = wd_This->Materialplantdata
" materialvaluationdata = wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM -
ERROR: -Type conflict when calling a function module
hi to all,
when iam executing the program in browser Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
NODE_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_IP_SELECTION TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
DATA:
NODE_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_PLANN_NODE TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
LOOP AT ITAB INTO WA.
MOVE-CORRESPONDING WA TO WA1.
APPEND WA1 TO ITAB1.
ENDLOOP.
navigate from <CONTEXT> to <PLANN_NODE> via lead selection
NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
CALL METHOD NODE_PLANN_NODE->BIND_TABLE
EXPORTING
NEW_ITEMS = ITAB1
SET_INITIAL_ELEMENTS = ABAP_TRUE
INDEX =
ENDMETHOD.CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh -
Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure
Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
PalaniHi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM -
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
CNTL_ERROR while calling a function module from Java webdynpro
I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciatedGood catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
SOURCEVAL TYPE /BIC/OIINVQTY,
SOURCEUOM TYPE /BIC/OIUSUOM,
USITM TYPE /BIC/OIUSITM,
TARGETUOM TYPE /BIC/OIUSUOM,
CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
SELECT SINGLE I~/BIC/USPRDUOM
FROM /BIC/PUSITM AS I
INTO PRODUCTION_UOM
WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
IF ( SY-SUBRC = 4 ). " no records found
"RAISE PARTNO_NOT_FOUND.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
" load the parameters
SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
CALL FUNCTION 'Z_CA_CONVERT_US_COST'
EXPORTING
PSOURCEVAL = SOURCEVAL
PSOURCEUOM = SOURCEUOM
PUSITM = USITM
PTARGETUOM = PRODUCTION_UOM
IMPORTING
PTARGETVAL = CONVERTED_COST
EXCEPTIONS
CONVERSION_NOT_MAINTAINED = 1
PARTNO_NOT_FOUND = 2
OTHERS = 3.
" ... [do the rest]
Thanks for your help,
Dennis -
Upload data from excel with vba by calling a function module
Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
Christoph KirschnerHI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
begcol TYPE i DEFAULT 1 NO-DISPLAY,
begrow TYPE i DEFAULT 1 NO-DISPLAY,
endcol TYPE i DEFAULT 100 NO-DISPLAY,
endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
col LIKE alsmex_tabline-col,
size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
title(60),
table(6),
field(10),
kz(1),
END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
value_0001(50),
value_0002(50),
value_0003(50),
value_0004(50),
value_0005(50),
value_0006(50),
value_0007(50),
value_0008(50),
value_0009(50),
value_0010(50),
value_0011(50),
value_0012(50),
value_0013(50),
value_0014(50),
value_0015(50),
value_0016(50),
value_0017(50),
value_0018(50),
value_0019(50),
value_0020(50),
value_0021(50),
value_0022(50),
value_0023(50),
value_0024(50),
value_0025(50),
value_0026(50),
value_0027(50),
value_0028(50),
value_0029(50),
value_0030(50),
value_0031(50),
value_0032(50),
value_0033(50),
value_0034(50),
value_0035(50),
value_0036(50),
value_0037(50),
value_0038(50),
value_0039(50),
value_0040(50),
value_0041(50),
value_0042(50),
value_0043(50),
value_0044(50),
value_0045(50),
value_0046(50),
value_0047(50),
value_0048(50),
value_0049(50),
value_0050(50),
value_0051(50),
value_0052(50),
value_0053(50),
value_0054(50),
value_0055(50),
value_0056(50),
value_0057(50),
value_0058(50),
value_0059(50),
value_0060(50),
value_0061(50),
value_0062(50),
value_0063(50),
value_0064(50),
value_0065(50),
value_0066(50),
value_0067(50),
value_0068(50),
value_0069(50),
value_0070(50),
value_0071(50),
value_0072(50),
value_0073(50),
value_0074(50),
value_0075(50),
value_0076(50),
value_0077(50),
value_0078(50),
value_0079(50),
value_0080(50),
value_0081(50),
value_0082(50),
value_0083(50),
value_0084(50),
value_0085(50),
value_0086(50),
value_0087(50),
value_0088(50),
value_0089(50),
value_0090(50),
value_0091(50),
value_0092(50),
value_0093(50),
value_0094(50),
value_0095(50),
value_0096(50),
value_0097(50),
value_0098(50),
value_0099(50),
value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
mask = '*.xls'
static = 'X'
CHANGING
file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = filename
i_begin_col = begcol
i_begin_row = begrow
i_end_col = endcol
i_end_row = endrow
TABLES
intern = intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
intern1 = intern.
CLEAR intern1-row.
APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
AT NEW col.
t_col-col = intern1-col.
APPEND t_col.
ENDAT.
zwlen = strlen( intern1-value ).
READ TABLE t_col WITH KEY col = intern1-col.
IF sy-subrc EQ 0.
IF zwlen > t_col-size.
t_col-size = zwlen.
* Internal Table, Current Row Index
MODIFY t_col INDEX sy-tabix.
ENDIF.
ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
LOOP AT intern.
fieldnames-title = intern-value.
APPEND fieldnames.
AT END OF row.
EXIT.
ENDAT.
ENDLOOP.
ELSE.
DO zwlines TIMES.
WRITE sy-index TO fieldnames-title.
APPEND fieldnames.
ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
IF kzheader = 'X'
AND intern-row = 1.
CONTINUE.
ENDIF.
tind = intern-col.
CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
ASSIGN (zwfeld) TO <fs1>.
<fs1> = intern-value.
AT END OF row.
APPEND data_tab.
CLEAR data_tab.
ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
EXPORTING
file_name = filename
TABLES
data_tab = data_tab
fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES: BEGIN OF t_datatab,
col1(25) TYPE c,
col2(30) TYPE c,
col3(30) TYPE c,
col4(30) TYPE c,
col5(30) TYPE c,
col6(30) TYPE c,
col7(30) TYPE c,
col8(30) TYPE c,
col9(30) TYPE c,
col10(30) TYPE c,
col11(30) TYPE c,
END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol TYPE i VALUE '1',
gd_srow TYPE i VALUE '1',
gd_ecol TYPE i VALUE '256',
gd_erow TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
DEFAULT 'c:test.xls' OBLIGATORY. " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select File'
default_filename = '*.xls'
multiselection = ' '
CHANGING
file_table = it_tab
rc = gd_subrc.
LOOP AT it_tab INTO p_file.
* so_fpath-sign = 'I'.
* so_fpath-option = 'EQ'.
* append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES it_datatab
USING p_file
gd_scol
gd_srow
gd_ecol
gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/ wa_datatab-col1,
wa_datatab-col2,
wa_datatab-col3,
wa_datatab-col4,
wa_datatab-col5,
wa_datatab-col6,
wa_datatab-col7,
wa_datatab-col8,
wa_datatab-col9,
wa_datatab-col10,
wa_datatab-col11.
ENDLOOP.
*& Form UPLOAD_EXCEL_FILE
* upload excel spreadsheet into internal table
* -->P_TABLE Table to return excel data into
* -->P_FILE file name and path
* -->P_SCOL start column
* -->P_SROW start row
* -->P_ECOL end column
* -->P_EROW end row
FORM upload_excel_file TABLES p_table
USING p_file
p_scol
p_srow
p_ecol
p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
* Row number | Colum Number | Value
* i.e. 1 1 Name1
* 2 1 Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = p_file
i_begin_col = p_scol
i_begin_row = p_srow
i_end_col = p_ecol
i_end_row = p_erow
TABLES
intern = LT_INTERN
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
FORMAT COLOR COL_BACKGROUND INTENSIFIED.
WRITE:/ 'Error Uploading file'.
EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
FORMAT COLOR COL_BACKGROUND INTENSIFIED.
WRITE:/ 'No Data Uploaded'.
EXIT.
ELSE.
SORT lt_intern BY row col.
LOOP AT lt_intern.
MOVE lt_intern-col TO ld_index.
assign component ld_index of structure
p_table to <fs>.
move : lt_intern-value to <fs>.
* MOVE lt_intern-value TO p_table.
AT END OF row.
APPEND p_table.
CLEAR p_table.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. "UPLOAD_EXCEL_FILE
Regards
Pavan -
System failure, during call of function module RSWR_RFC_SERVICE_TEST
Hi Team,
I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew -
Calling a function module from within a transformation routine
I created a routine within a transformation and experience the following weird behavior now:
When I call a function module within that routine, the load fails with the following error message:
Exceptions in Substep: Rules
When I click on the button next to this text, it point me to my function module call.
What I do not understand is, that the following two scenarios work fine:
- Having the same function call (with fake values) in a plain ABAP program works beautilfully
- If I copy the content of my function module directly into my transformation routine, everything works fine as well
I am now wondering whether the routine does not "see" the function module I am calling. The module resides in a different package. Is that a problem? Do I have to include something first?
Here is the code that calls my FM (
CALL FUNCTION 'Z_CA_CONVERT_US_COST'
EXPORTING
PSOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC
PSOURCEUOM = SOURCE_FIELDS-BASE_UOM
PUSITM = SOURCE_FIELDS-/BIC/USITM
PTARGETUOM = PRODUCTION_UOM
IMPORTING
PTARGETVAL = RESULT
EXCEPTIONS
CONVERSION_NOT_MAINTAINED = 1
PARTNO_NOT_FOUND = 2
OTHERS = 3.
Thanks a lot for your help. Points will be assigned.
DennisGood catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
SOURCEVAL TYPE /BIC/OIINVQTY,
SOURCEUOM TYPE /BIC/OIUSUOM,
USITM TYPE /BIC/OIUSITM,
TARGETUOM TYPE /BIC/OIUSUOM,
CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
SELECT SINGLE I~/BIC/USPRDUOM
FROM /BIC/PUSITM AS I
INTO PRODUCTION_UOM
WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
IF ( SY-SUBRC = 4 ). " no records found
"RAISE PARTNO_NOT_FOUND.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
" load the parameters
SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
CALL FUNCTION 'Z_CA_CONVERT_US_COST'
EXPORTING
PSOURCEVAL = SOURCEVAL
PSOURCEUOM = SOURCEUOM
PUSITM = USITM
PTARGETUOM = PRODUCTION_UOM
IMPORTING
PTARGETVAL = CONVERTED_COST
EXCEPTIONS
CONVERSION_NOT_MAINTAINED = 1
PARTNO_NOT_FOUND = 2
OTHERS = 3.
" ... [do the rest]
Thanks for your help,
Dennis -
How to call a Function Module in a BSP Page?
Hi there,
i have no deep knowledge about BSP Programming.
So what i wanna do is to call a Function Module in a BSP Site..
I go to SE80... create a new empty BSP Application under that a Page with FlowLogic:
I see the new empty BSP Page with this Test Button and Hello world in it.
So my Funtion Module is called Z_Subscribe
What i have to do that the FM is called when i open the BSP?
Thanks
Bjoern
Edited by: bjoern bayerschmidt on Mar 3, 2009 1:01 PMHi Bjoem,
Search the forum for tutorials and blogs...
Regards,
Anubhav -
Can i call a function module of SAP?
Hi, i have a question... Can i call a function module of SAP... I need print a document from a device, can i call the function module of SAP in order that me it prints it?
Thanks,Hi Victor,
you can use the GenericSync Example of the MDK. This calls the Module to verify the user directly. Generic Sync is exactly for that purpose: call a BADI directly and no usage of SyncBO. Be aware, that you - out of the box- sync your app data as well at that moment, because a sync runs both - generic and smartsync. Even worse: even when you have nothing to sync in Generic Sync - so nothing to print - it will call the function module for generic sync as long as it is registered.
Well, anyway, this is the way to call a function module separate.
If it works with you rparticular print module? I have no idea, but if this is a normal function module - well, it should be ok.
Hope this helps.
Regards,
Oliver -
Recursive call of function module 'CRM_ORDER_MAINTAIN'
Hi together,
I have got the follwoing problem.
We have to implement a proof on a partner function regarding the role.
I found the BADI IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK
I implement the the follwoing coding:
IF is_partner_wrk-partner_fct = 'ZADI0012'.
SELECT SINGLE * INTO ls_but100
FROM but100
WHERE partner = is_partner_wrk-external_partner_number
AND rltyp = 'BUP004'.
IF sy-subrc = 4.
MESSAGE e003(crm_ic_partner) WITH is_partner_wrk-external_partner_number.
ENDIF.
ENDIF.
when I enter a partner with a wrong role, I got the message I have implemented. Afterwards I type in a partner with the correct role I got a short dump.
Recursive call of function module 'CRM_ORDER_MAINTAIN'
Has anybody an idea how to solve this issue?
Thanks and best regards,
SylviaHi scharfen,
We got the similar requirement what you implemented.I implemented the below code but the error message is coming 3 times.
I have got the follwoing problem.
We have to implement a check on a partner function regarding the role.
I found the BADI IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK
I implemented the the follwoing coding:
method IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK .
DATA: lw_but100 TYPE but100,
lw_but000 TYPE but000,
lw_msgno TYPE bal_s_idno,
lt_msgno TYPE bal_r_idno,
l_partner TYPE symsgv,
lw_low TYPE balmsgidno.
IF is_partner_wrk-PARTNER_FCT = '00000009'.
SELECT SINGLE * INTO lw_but000
FROM BUT000
WHERE partner = is_partner_wrk-external_partner_number
AND TYPE = '2'.
IF sy-subrc EQ 0.
SELECT SINGLE * INTO lw_but100
FROM but100
WHERE partner = is_partner_wrk-external_partner_number
AND rltyp = 'BUP004'.
IF sy-subrc = 0.
REFRESH lt_msgno.
lw_msgno-sign = 'I'.
lw_msgno-option = 'EQ'.
lw_low-msgid = '/DS1/A'.
lw_low-msgno = '139'.
lw_msgno-low = lw_low.
APPEND lw_msgno TO lt_msgno.
CALL FUNCTION 'CRM_MESSAGES_DELETE'
EXPORTING
IT_R_MSGIDNO = lt_msgno
iv_ref_object = is_partner_wrk-guid.
l_partner = is_partner_wrk-external_partner_number.
CALL FUNCTION 'COM_PARTNER_MESSAGE_COLLECT_OW'
EXPORTING
is_partner_control = is_partner_control
iv_msgno = '139'
iv_msgid = '/DS1/A'
iv_msgty = 'E'
iv_msgv1 = l_partner.
ELSE.
REFRESH lt_msgno.
lw_msgno-sign = 'I'.
lw_msgno-option = 'EQ'.
lw_low-msgid = '/DS1/A'.
lw_low-msgno = '139'.
lw_msgno-low = lw_low.
APPEND lw_msgno TO lt_msgno.
CALL FUNCTION 'CRM_MESSAGES_DELETE'
EXPORTING
IT_R_MSGIDNO = lt_msgno
iv_ref_object = is_partner_wrk-guid.
ENDIF.
ENDIF.
ENDIF.
endmethod.
when I enter a partner with a wrong role, I got the message I have implemented. But the message is appearing 3 times in the errorlog. Can anyone please let me know the reason for this and solution to resolve this.
Regards,
Swetha
Maybe you are looking for
-
Application-to-application authentication using Calendar Web Services
Calendar Web Services Application-to-application authentication (Proxy authentication) Abstract: Application-to-application authentication allows services to trust other services without having to authenticate the end-user making use of these service
-
Help! Bought an IPod from a PC user, now I can't connect it to my Mac!
I bnought an IPod from a friend who was using it with a PC. I erased all of it's memory and then restored it using the IPod updater software I got from apple.com. Now, I can't connect it to my Mac, and the IPod screen goes from the "apple" display, t
-
Hi all, So, I opened my Macbook Pro 13" Late 2011 this morning to find the screen behaving strangely. There was a blue tint spreading from the left side, like ghosting, but more streaky. Anyway, first thing I tried was to shut down the Mac and start
-
Say I have a table TBL_PROJECT. Projects can have different status - Active, Hold, Complete Project_ID Descritption Latest Status Target Completion Date 1 Project A Active 12/20/2013 2 Project B Hold 03/04/2014 3 Project C Complete 10/30/2013 Say I h
-
HT201317 How do I take a photo from photostream and put it in a document
I can't figure out how I can use my pictures from photostream other than viewing and sharing. I need to insert them into projects I'm creating.