Calling all true Powerbook geeks-problem w/hard drive (sort of)

Ok, here's the deal. My old PowerBook G4 (manufactured in 2001) has a PMUnit that had pretty much gone to h in a hand basket so... I removed its hard drive and sold the whole thing to someone for them to play with/fix. I tried to put the hard drive in a case I bought at Radio Shack so I could xfer the stuff that was on that drive and then erase and zero the drive out (with hopes, of course, that I could at least make the little drive into a nice small external extra drive to use for this or that).
I got the data off the drive fine and the drive seems fine BUT... here's the deal - it doesn't quite fit into the standard case for this size drive. The Mad Dog case, for example, at Radioshack which is typically used, I understand, for these size of drives, is just a hair too small... sort of though it would fit save for the little black bolt type things on the side of the hard drive (which prevent the thing from slipping nicely into the case) and the screws for the board in the case which don't really sit flush after you screw them in through the drives screw holes. So - people with more experience than I here: what am I doing wrong? People on Craigslist said this case should fit these drives without a problem and many there say they've done this very thing.
I know someone here has probably done this. It's my drive and I want to be able to still use it even though the PowerBook itself is gone. Help!

AH: I hope you haven't already stripped the unusually soft heads of the screws by trying to use the wrong type or size of screwdriver to remove them. That would leave both you and the PB's next owner with a problem, for which the solution might be here (note the "might"):
http://www.ifixit.com/PowerBook-Parts/G4-Aluminum-15-Inch-Screw-Set/IF154-022
But N.B. the following note on that page:
"Includes all screws except those from hard drive bracket and display assembly."
(boldface added)
You might have to call and find out whether the screws not included in the kit are the very ones you need, or whether those are something different.

Similar Messages

I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fi hiw do I get iMac to do it

I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fii and on my iPad via AirPlay. How can I do the same with iMac as this software isn't compatible

To install apps from developers Apple doesn't recognize go to Security and Privacy in the System Preferences and change Allow apps downloaded from anywhere

FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
However, do not look for any results for above two weeks.
Roger

The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives. I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ). The statement was true at the time it was written and has nothing to do with memory problems.
Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too. I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon. Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works. I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition. As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers. But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time. One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces. Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code. But, knowing my source, it may all be fiction.
The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ. If you send me the full part numbers I will check the specifications a get back to you. Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
Roger

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder.

I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

Yes. Find the LR catalog file by looking in Edit/Catalog Settings/General. Close LR and navigate to that spot. The catalog file is the one that ends in .lrcat - move it to wherever you want. Next to the .lrcat file is a subfolder called Previews.lrdata. You can move that over as well, but if you don't LR will generate new previews. Double-click on the .lrcat file in its new home and LR will open with that catalog. Set Preferences to When Starting Up Use Most Recent Catalog.

I copied all my CD's onto a hard drive. Can I transfer each CD from the hard drive to my iPhone either wirelessly or by direct connection?

I copied all my CD's onto a hard drive. Can I transfer each CD from the hard drive to my iPhone either wirelessly or by direct connection? Do I have to make a playlist for each cd and then transfer it to my iPhone?

When you buy your new iMac you will be able to have the installation process transfer all your applications, data (including music, pictures, documents, etc) and settings to your new computer. In the past that was done via Firewire. I'm not entirely sure of the process with the new iMacs that don't have firewire. I think it can be done via ethernet and probably via tha thunderbolt cord using a firewire adapter but you'll want to check that out.
    With the your new computer properly connected to your old computer, the initial booting of the new computer will include the ability to move everything over.
    If for some reason you don't want to do that (smart if you have some horrible software issue that is causing problems) you can connect your old computer to the new one and start it in Target Disk mode where it will be seen as a hard drive. You can then manually copy over all your music and import that into iTunes (and any other data you want).
    Somebody here will surely point you to directions for connecting an older iMac with no Thunderbolt to a newer iMac with no Firewire.

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

HT1386 my pc crashed and I bought a new laptop and was able to recover all my music from the old hard drive and transfer it to the new pc. I bought a new album on itunes and am unable to download it on my 6th nano even though I authorized the new pc. An

My old PC crashed and I ended up buying a new one. I was able to recover all my music from the old hard drive and restore it in itunes. I purchased a new album online thru itunes and added it to my library. When I tried to add the album to my 6th nano it wouldn't download. All the tracks are check marked and I can listen to the album on my pc but it won't sync onto the ipod. The new pc is authorized, any ideas?

You can only sysc with one iTunes library. The new computer is a new library. You have to restore your iPod on the new conputer and then sync.

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334)

I want to put all my music onto an external hard drive. But I can't get it to put music on my itunes. The music list is completely empty and so is my IPOD.

I want to put all my music onto an external hard drive. But I can't get it to put music on my itunes. The music list is completely empty and so is my IPOD. How do I do this? I have a PC with Windows.

You say the music is not on the external HD, the music list (iTunes?) is empty, and it is not on the iPOd. Then where is the music you want to move to the external HD?
You can redownlaod iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have all my movies on an external hard drive. I want to be able to access them without copying everything to my iTunes. How can I do this?

I have all my movies on an external hard drive. I want to be able to access them without copying everything to my iTunes. How can I do this?

I think DebinSC might mean using the movies without copying to the iTunes library?
Maybe the solution is to uncheck this box?
Or am I barking up the wrong tree?

How can i sync music from my phone onto my new computer without losing it all? my old computer's hard drive crashed so it is unusable.

how can i sync music from my phone onto my new computer without losing it all? my old computer's hard drive crashed so it is unusable.

If you do not have a back up of the crashed hard drive you can download an app to copy from the iPhone to iTunes on the new hard drive.
I have used Pod2Mac. There is also Pod2PC.
There are numerous choices, some free, some payed. Do a Google search.

I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the libray from my iPod and use it in my new computer (Windows)?

I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the library from my iPod and use it in my new computer (Windows)?

You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

How do I transfer all data from my old internal hard drive to a new internal hard drive

How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.

Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it.

Calling all true Powerbook geeks-problem w/hard drive (sort of)

Similar Messages

Maybe you are looking for