Calling another program from a Dynpro screen
Hi,
We have a custom screen to create an equipment. When users click on Save, the screen flow goes into BDC and creates the equipment.
After the equipment is created, we need to execute another custom program to create Measuring points.
How can I call this custom program and still get back to my equipment master screen?
I have coded it as follows but the result is the end result of the measuring point screen and not my original equipment master screen.
SUBMIT ZCREATE_MEASURING_POINTS USING SELECTION-SCREEN '1000'
WITH SELECTION-TABLE rspar_tab
AND return.
I have coded it as follows but the result is the end result of the measuring point screen and not my original equipment master scree
Does it mean that you end up in list output of measuring custom program? If so, you have to export this resulting list to memory, which will suppress showing it.
SUBMIT ZCREATE_MEASURING_POINTS USING SELECTION-SCREEN '1000'
WITH SELECTION-TABLE rspar_tab
EXPORTING LIST TO MEMORY
AND return.
This way you will be back on calling program.
Regards
Marcin
Similar Messages
-
Calling another program from the current program
Hi all,
In our requirement we are calling another program from our current program .
In the current program( from which we are calling ) we are giving file name in the selection screen
and when we run the current program we are successfully going to other program but our main requirement is to higlight the file name which we had given earlier .
Note : The called program doesnt have any selection screen.HI
use EXPORT and IMPORT key words for passing data from one program to another program.
as the called program is available in the same session you can use above key words which means you are accessing ABAP MEMORY.
You can also use SET and GET key words which means SAP memory
take F1 help there are examples tooo and detailes explanation abou the same
Regards
Ramchander Rao.K
Edited by: Ramchander Krishnamraju on Dec 24, 2008 7:05 AM -
How to call another program from LabVIEW?
Hi!
Is there anyone that can answer my question? I have found a similar thread where the user needed to call labVIEW from some program but I want to do the opposite.
I made a program in labVIEW that communicates via COM-ports (serial communication) with the processor I use at the job (Ubicom´s IP2022).
Now I want to add more funcionality to this program. I want to be able to program re-program IP2022 through this LabVIEW application.
The programming is done via an Ethernet-dongle. I start a program called IP2kProg, I write the ip-address of the dongle and the program-file (.elf) downloads at this address. But how can I do this from
LabVIEW, do I need to open IP2kProg or can I send some values to it via LabViEW?
Ant suggestions?
Thanks, AmirAmir,
There are couple of options:
1. If your IP2kProg program has a command-line interface, you can use LabVIEW's System Exec.vi and send the commands and parameters to it.
2. If the IP2kProg has an API / exported functions, you can call them from LabVIEW using the Call Library Function Node.
Hope this gives you some ideas.
-Khalid -
Problem regarding calling a program from another program
Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumikSubmitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND "Warehouse number/complex
vbeln = w_screen1000-io_vbeln. "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr TYPE st_iblnr,
* Define internal table and work area for select-options
l_selection TYPE rsparams,
li_selection TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
CLEAR l_selection.
l_selection-selname = 'IM_IBLNR'. "Option name
l_selection-kind = 'S'. "S= select options P=Parameters
l_selection-sign = 'I'. "Sign
l_selection-option = 'EQ'. "Option
l_selection-low = l_iblnr-iblnr. "Value
APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas -
Calling another application from a java program
Hi, Java ppl.
I wanted to know how can I call another program say a help application or an exe from a java program. anyone with any advice or a piece of code would help.
Thanks
PradeepI had the same situation and I tried the code that you sugested and it works. I was wondering, what am I expecting in the while loop that appears after the int inp; statement? Is some data going to be displayed on the screen? How essential is to have that while loop after the calling the exec() method?
Sorry for the amount of questions, I never tried this before.
Best regards,
Luis E. -
Calling a Report Program from Web Dynpro
Hi all,
I have a requirement, where i have to call a report program from web dynpro?. Wether its possible to call a report program in web dynpro?. Is we can call it, how this functionality has to be achived?Hello,
Yes it is possible to call report using SUBMIT statement from one of the method defined in COMPONENTCONTROLLER's method tab.
Once you define the method with SUBMIT statement then call that method with proper event.
Rest configuration will remain same for ABAP webdynpro.
Hope this helps.
Thanks,
Augustin. -
Calling Batch input from Web Dynpro - any alternatives for table updates?
Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, TineHi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra -
How to call a program from FM which acts as popup?
Hi,
I need to call a program from FM and once the program is called it needs to be opened as a popup. Maybe we need to assign size when we call from FM or do we need to give size in the program it self?
I know i can either use the Submit command or Call Transaction command. But that it self will open a full screen which i dont want. It needs to be of a smaller size.
Any help will be appreciated.
ThanksHi,
Try this,
REPORT ZEX_POPUPSCREEN .
*& POPUP SCREEN
* Table Declaration
TABLES VBAK.
* Start of Selection
START-OF-SELECTION.
SELECT * FROM VBAK.
WRITE / VBAK-VBELN HOTSPOT ON.
ENDSELECT.
* Display the screen
AT LINE-SELECTION.
WINDOW STARTING AT 10 10
ENDING AT 40 25.
WRITE:/ 'VBAK-VBELN, VBAK-KUNNR'.
Regards,
Nikhil. -
Calling dialog program from report
Hi All,
I need to call dialog program from report and do not want the initial screen to be shown and execute the dialog program. can this be possible, if yes please let me know this to do this, when I tried using leave to transaction its showing the initial dialog screen.
Thanks in advane
jogHi,
Create a Z trnsaction Code for the Transaction you want to call.
Go to SE93. Give Transaction name and click on create.
Select start object as 'Transaction with Variant' or 'Transaction with Parameter'.
On second screen give transaction name and check the <b>check box for 'Skip initial screen'</b>.
Find out the initial screen for the transaction and mention it.
Now, you can call this Z transaction in your program. -
Is it possible to call another program (vlc media player in my case) in a VI???I dont want to use the Active X control for playin videos as it does not have much playback functions...
Use the System exec.vi to launch any executable from LabVIEW in your case VLC player. Provide the required inputs path, command line args so that you can obtain the desired functionality.
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved. -
Error while calling java program from ABAP
Hi Experts,
We are trying for RFC inbound scenario.
We followed the below blog
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
We are working with SAP JCO 3.0.2
We are getting the error : 'STFC_CONNECTION' could not be found in the server repository.
After I run the Java server program if I execute the RFC destination directly from SM 59 it is showing successful messages.
If I stop the java program then this RFC is failing. Based on this we concluded that RFC to Java connection is working fine.
But as mentioned in blog if we call the RFC Destination from ABAP program it is giving the below error,
'STFC_CONNECTION' could not be found in the server repository.
If we test the RFC destination using RFC_TRUSTED_CHECK standard FM we are getting the below error.
'RFCPING' could not be found in the server repository.
We create the RFC destination of Type : TCP/IP as exactly mention in the blog.
Please help us in resolving this issue.
Thanks
PrincePabi,
Using the RFC connection,we can establish a link between Java and SAP.
Afterwards,hope we can call Java program from ABAP.
Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
DATA: REQUTEXT LIKE SY-LISEL,
RESPTEXT LIKE SY-LISEL,
ECHOTEXT LIKE SY-LISEL.
DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
DATA: RFC_MESS(128).
REQUTEXT = 'HELLO WORLD'.
RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION RFCDEST
EXPORTING
REQUTEXT = REQUTEXT
IMPORTING
RESPTEXT = RESPTEXT
ECHOTEXT = ECHOTEXT
EXCEPTIONS
SYSTEM_FAILURE = 1 MESSAGE RFC_MESS
COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
IF SY-SUBRC NE 0.
WRITE: / 'Call STFC_CONNECTION SY-SUBRC = ', SY-SUBRC.
WRITE: / RFC_MESS.
ENDIF.
Regards,
Sree -
How to call java program from ABAP
Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm -
Calling adobe form from Web Dynpro ABAP
Hi Friends,
This is the following error, which i got when i tested my application. Calling adobe form from Web Dynpro ABAP.
WebDynpro Exception: ADS: Request start time: Tue Nov 16 14:00:22 YEKT
2010(200,101).
Can some one tell me how to solve this....
Regards
SankarHi,
Please refer to this same link in forum
WebDynpro Exception: ADS: Request start time, start Interactive Form
WebDynpro Exception: ADS: Request start time
Thanks
Pradeep -
Calling Java program from ABAP
Hi All,
my ABAP program downloads one file to one folder. Then one Java program is running to Encrypt the file.
Now , they want to call the JAVA program in ABAP, so that they can encrypt the file before downloading.
Is it possible to call a Java program from ABAP ? If Yes, please give me the detailed procedure.
Thanks
pabiPabi,
Using the RFC connection,we can establish a link between Java and SAP.
Afterwards,hope we can call Java program from ABAP.
Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
DATA: REQUTEXT LIKE SY-LISEL,
RESPTEXT LIKE SY-LISEL,
ECHOTEXT LIKE SY-LISEL.
DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
DATA: RFC_MESS(128).
REQUTEXT = 'HELLO WORLD'.
RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION RFCDEST
EXPORTING
REQUTEXT = REQUTEXT
IMPORTING
RESPTEXT = RESPTEXT
ECHOTEXT = ECHOTEXT
EXCEPTIONS
SYSTEM_FAILURE = 1 MESSAGE RFC_MESS
COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
IF SY-SUBRC NE 0.
WRITE: / 'Call STFC_CONNECTION SY-SUBRC = ', SY-SUBRC.
WRITE: / RFC_MESS.
ENDIF.
Regards,
Sree -
Calling Concurrent program from OAF-PDF Outtput not in English
Hi ,
I've successfully done "Calling Concurrent Program from OAF" once i clicked the button which i have in my page it generates RequestID and that shows request page,In that when i click "Output" icon the PDF file is opened.
But in that PDF file it shows the datas in the different language.
For example Emp name column is shown as
ΚΙΝΓ
ΧΛΑΡΚ
ΣΧΟΤΤ
ΦΟΡ∆
ΣΜΙΤΗ
ΑΛΛΕΝ
Αδαµσ
Σεντηιλςελ
Σαραϖανα Χ
Σεενυ
Σαβενα
Ηαριkindly help me...
Regards,
SaroHi Hussein,
Here I've shown the details of log file
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXCON module: XXCON
Current system time is 29-DEC-2010 11:37:23
+-----------------------------*
*| Starting concurrent program execution...*
+-----------------------------*
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Wed Dec 29 11:37:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Executing request completion options...
------------- 1) PRINT -------------*
Printing output file.
Request ID : 5865903
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-DEC-2010 11:37:33
Regards,
Saro
Maybe you are looking for
-
"index.xml missing" • Do I laugh, cry, or scream?
After a variety of hardware problems with my iBook (http://discussions.apple.com/thread.jspa?threadID=1523536&tstart=0), I have a new software-related problem. Some of my Pages files are acting up on me. When I try to open said files from Finder or f
-
How to setup Mail server in Oracle 10g?
Hi all, I want to setup a mail server in my OS, can anyone give me the step by step procedure to setup a mail to send mails to all the users. I would appreciate if anyone refer me any document. Jafar
-
What is the best mail server software, compatible with G5 and OS X 10.5.8?
Hello. I want to install/set up a mailserver on Mac OS X 10.5.8. It will host approximately 35users, should have pop, imap, spam protection, webmail/admin interface, routing feature, all the usual stuff, I'm doing this because we often have to reciev
-
Trying to scan but I get an error "The file already exists in the catalog"
I cannot scan, every time I try scanning I get an error "Nothing was imported. The files or folders selected to import did not contain any supported file types, or the files are already in the catalog. I checked the temp directory, Files do exist whi
-
Slow MBP: Help with EtreCheck and MacOS X reinstall
Hi there, I've already posted about my MacBook Pro which is really annoying me. I know 2GB RAM is not enough, but I can't afford buying extensions and would like to cope with this laptop for another 6 months, then probably get a PC as many programs t