Calling Any contact need to display phone number

Hi Team,
We have got updated to 10.2 for BB Z10 and its good improvement.
Basic function to display phone numbers when calling contact is still missing and should not be acceptable.
Phone number gets displayed when call is connected but not before.
This is important as sometimes we have multiple phone numbers per contact.
Thanks,
Ravindra

Good to know you like 10.2

Similar Messages

  • When a contact gets a new phone number, I delete the old and enter the new.  Then when I text or call the old number shows up as a selection yet it's no longer under the contacts info.

    When a contact gets a new phone number, I delete the old number and enter the new number.  When I try to text or call, both the old a new numbers. One up as a selection choice, even though the old number is gone from the contact.

    That's normal behavior as the old one will remain in the memory cache for a while until it's eventually overwritten.  If it's particularly bothersome to you, you can restore your phone as NEW and this will empty the cache.

  • I have an I phone 4s and I have many contacts in my phone.  However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number.  I have checked every setting I can think of ?

    I have an I phone 4s and I have many contacts in my phone.  However, when my phone rings or I receive a message.  The phone does not show the name of the caller.  It only shows the phone number that is calling.  I am sure this is a setting problem, but I have checked every setting I can think of.  Any suggestions??

    If you are a Verizon user try this:
    Open the phone and dial *228. This is a Verizon over-the-air programming number.
    When the system answer press 1 for "Program or activate your phone"
    Wait for the call to disconnect. You should get a prompt stating "Settings updated."
    Double tap the Home button to bring up the recently used apps list at the bottom.  Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
    Wait a 3-5 minutes.
    Try your phone again and see if it's fixed.

  • Help needed- Reg: Display page number in SQL Reports

    Hi,
    I need to display page number in " page no: X of Y " format where X is current page & Y is total number of pages. Now I am able to display only the current page using ' sql.pno '. but not able to display in ' X of Y ' format.
    Any inputs in this regard will be helpful.
    Thanks & Regards,
    Anilkumar.

    Hello Anil,
    If you have the above requirement for Oracle Reports then follow the steps:
    1.In the Paper Layout view or Paper Design view, choose InsertPage Number.
    2. In the Insert Page Number dialog box, choose from the list the location for the page number.
    3.Click the desired page number format: Page Number Only or Page Number and Total Pages.
    Cheers,
    Suresh

  • Need a REAL phone number to schedule repairs

    I spent an hour on the phone yesterday, trying to REQUEST that someone come look at my multifunction machine (we're a HUGE international business, just like HP).
    After being transferred to at least 5 different departments because the person at HP:
    1) from the model number, couldn't figure out what kind of machine I have.....???????
    2)  couldn't understand my serial number....they kept telling me it was not a valid serial number, even though I was reading it off the machine configuration page that I printed from the printer's administration menu....???  After repeating the serial number twice, I was passed immediately from a phone operator to a manager.
    2)  they didn't know the appropriate department to transfer my call to.....???
    FINALLY someone was (with random 10-minute hold intervals) able to enter a ticket into the system and issue me a case number.  That took AN H-O-U-R.  Then I had to wait till THE NEXT DAY for someone else to call and tell me that someone would be at my office within a 2-hour interval to repair the machine.
    When he walked in the office, he was aware of only ONE of the issues I'd called HP about...even though I repeated BOTH issues to the ~4-5 people I talked to while they transferred me from department to department.  (A constantly-jamming tray and a loose network port......on a 5-month old machine that's used by ~30 people.)  Unfortunately, it wasn't my regular repair guy (yeah, this isn't the first repair we've needed), otherwise I would have talked to HIM about my frustrations.
    I need a REAL phone number where I can call this repair-scheduling-center DIRECTLY.  WHEN the next problem with my machine(s) happens, I do NOT want to have to spend another hour on the phone, trying to schedule repairs.
    Can someone provide me with this direct line?
    Thanks in advance.
    There was no appropriate board to post this on, so I apologize for posting it on the wrong one.

    I just noticed that the repairman has been on the phone for 30 mins about our repairs.....most of it has been on hold.

  • I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

    I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

    I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

  • My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    Sounds like your friend didn't disable iMessage on his/her iphone before switching.  Have your friend do the following:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "edit products"
    Click on the "x" to the right of his/her old iPhone.
    Click "unregister"
    This should unregister it with the iMessage server, which will allow you to send texts as normal SMS.
    On your iPhone make sure you have Settings>Messages>Send As SMS set to ON.

  • When I receive text messages, it displays phone number instead of contact name.

    I updated to iOS 5 on my iPhone 4 over the weekend. Since updating to iOS 5, all of my text messages show up with a phone number listed instead of the contacts name. I checked my contact info and all the contact information is listed and the numbers under the contact are correct. Has anyone else had this issue and if so have you discovered any resolutions?

    Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    Ps. PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • Problem with iMessage contacts being separated by phone number and email

    Hi all, sorry if this thread is a duplicate of another, I've seen some that are similar but none seem to match the exact situation I'm having.
    Me and 3 other friends have a group iMessages thread where we talk to each other.
    We each have several devices: ie. I have a Macbook Air and an iPhone 5S, one has a Macbook, an iPhone 4, and an iPad, etc etc. Essentially we all have a mix of devices which we can use to read the thread, all using the same Apple ID and with our phone number added.
    The problem is, every so often and for no discernible reason, someone will send a message and it'll start a new thread: this usually happens on my iPhone but occasionally it happens on my Macbook. Sometimes, what has become 2 threads on my phone will be only one thread on my Macbook, and vice versa. Same applies to my friends. However, sometimes what has become 2 threads for them is still only one thread for someone else, as though some of us have gone "out of sync".
    When you compare the contacts in the 2 threads, they are IDENTICAL (can't stress this enough, the contacts themselves have not been duplicated), however when I look at the same contact from one thread, their phone number will be highlighted in blue. In the other thread, their email address will be highlighted in blue.
    Therefore the problem seems to be that devices are unable to bring together an iMessage sent from a contact's phone with one sent from their email. If the information for both email and phone number are correctly filled in for a contact, why can Messages/iMessage not realise it is the same person and bring them together?
    The problem is, sometimes a message sent from the same device will first be sent from the phone number, then the next will be from the email address (or rather, everyone else's devices are seeing it that way, they're not doing anything different than usual, just typing in the thread and pressing send). Its as though the device is choosing one then the other, seemingly at random, and iMessage doesn't seem to be able to add them to the already existing thread but instead creates a new one as the "source' is different. Is this behaviour intended? Surely it can't be.
    Is this something to do with the "You can be reached by iMessage at" setting in iOS. One of us needs to be reached by both his email and phone number so we can't just all turn off the email on our phones/iPads for example.
    Is this a known problem? Is there something we can do about it? Is it ever going to be fixed?
    We've tried other messaging programs but they're just not as well integrated as Messages, and obviously being able to switch between my phone and my Macbook is hugely convenient.
    Any help would be much appreciated, we're now at the stage where we have 2 iMessage threads and a backup LINE group chat for when things are completely unfollowable due to every other message going to the duplicate thread.
    Thanks in advance.

    When you go to Settings>Messages do you see your Apple ID at the top?  Also, when you go to Settings>Messages>Receive At do you see both your email address and your phone number listed?

  • Need to have Phone Number field as just numbers with no formatting.

    We have a web service that is passed the work phone field from the contact object. That WS uses the phone number to auto-dial the customer's number for our sales reps.
    My issue is that the WS expects to just see the area code and the phone number as digits as 1235554444. It has been working fine for over a year and recently been failing as now the numbers come in with a "+" sign.
    The format seems to change depending on the time of day I look at the fields and is random for each user. The company profile is set to USA as the default and so are the user's locale settings.
    How do I make the "+" go away?
    I have tried various settings and couldn't seem to find one that didn't give me the formatting. I've also tried to copy the work phone field to a hidden field and using WF to strip out the "+" but there seems to be no way to do a REPLACE() function in a WF rule.
    Any ideas?

    So after spending enough time with this I was able to find a way around the issue. Ultimately I needed a phone number format that was fixed and would not mask the data per the user's locale settings. It also needed to be just area code and phone number shown as 1112223333.
    On the contact object, a new field was created as a Short Text. Then a WorkFlow as created that copies over the value from the WorkPhone field into this unformatted number so that it can be passed to our Web Service.
    It took a while for me to figure this out since if you just use the WorkPhone variable you get all the masking based on locale. I didn't have the functions available to me in the WorkFlow to just strip spaces and "+" or "( )" so I needed it to be as close as I coudl to just a basic phone number. By using the FieldValue() function it seemed to take a number like 1 (555) 444-4444 and return 1 555 4444444. This works no matter if it was +1 555 4444444 or +41 555 4444444 so I could then use some pattern logic.
    This is what I used to copy that data over to my temp/work field which is now passed to our click-to-dial function.
    Mid(FieldValue('<WorkPhone>'), InStr(FieldValue('<WorkPhone>'),' ') + 1,3) + Right(FieldValue('<WorkPhone>'),7)

  • IOS5 displaying phone number instead of name in text message screen

    At the top of the text message screen, where it used to say the recipient's name, it now says their phone number.  I cannot find any settings as to change this.  It happens to others who have iMessage on.  If they do not have an iPhone, or their iMessage is off, it still says their name.

    I fixed this problem by:
    1. Turn iMessage off
    2. Turn iMessage on
    3. Verify contact is in contact list
    4. Deleting the text message series prior to the one you want to send.  Say you've texed Bob Dole 1000 times, delete the entire thread.  Then, hit new message, load Bob Dole from contacts, and send. 
    For me, this ended the above problem.

  • Can't put any contacts into my 3gs phone app. icloud switched on

    bought a new 3gs i phone and updated it to IOS 5. unable to put any contacts into the contacts app. no + sign.

    Many thanks Dieselvdub. Followed your advice to the letter and it finally worked. Unfortunately the contacts app had disappeared but looked on the forum and discovered it had been switched into utilities app.
    Before your advice had been down to my local carphone warehouse shop who quickly said it was faulty and needed returning!!
    Many thanks again

  • Need help with phone number keypad please

    I have found when using my iPhone to call certain phone numbers requiring me to enter an extension number, I'll get a message that it's an invalid extension and try again, I try at least 2-3 times and still get the same message. Well I'll call back on a different phone and enter the exact same extension and it goes through. It's not always the same phone number/extension but it happens everytime I make a call on my iPhone that requires an extension to be keyed in.
    Does anyone have any suggestions or idea what I can do? I've reset the phone several times but it doesn't help.
    Thanks in advance,
    iPhoNettie

    Time to give AT&T a call.

  • Need to Manipulate Phone Number

    Good day all -
    Following this blog here (http://blogs.technet.com/b/nexthop/archive/2011/02/01/howtoadphonetolineuri.aspx)  to manipulate phone number is our AD organization.
    Unfortunately when Lync populates the contact field from AD it looks at the Telephone Number and Office Number. In our organization these numbers are reversed. Meaning, the 10 digit number is xxx.xxx.xxxx is listed in the "Office"
    field of AD and the 4 Digit Extension is listed in the "Phone". With that said, we do have have different calling blocks. Meaning must of our numbers are:
    555.555.9xxx
    and 555.556.6xxx
    All internal extensions (listed in the Telephone number field) begin with 5 and would be replaced with the last xxx in the above example.
    So for the 555.250.9xxx block would be 200-499 .... for example extension 5394 would be Direct Dial Number 555.555.9394
    And for the 555.556.6xxx block would be 600-799 ...  for example extension 5657 would be  Direct Dial Number 555-555.6657
    So my question is this...with the above - how can I populate the below script correctly? Thanks for helping out.
    $enabledUsers = Get-CsAdUser -Filter {Enabled -ne $Null}
    foreach ($user in $enabledUsers)
            $phoneNumber = $user.Phone
            $phoneNumber = $phoneNumber -replace "[^0-9]"
            $extension = $phoneNumber -match "^5"
            if ($extension)
                    $phoneNumber = "TEL:+120655" + $phoneNumber
            else
                    $phoneNumber = "TEL:+142556" + $phoneNumber
            Set-CsUser -Identity $user.Identity -LineUri $phoneNumber

    Hi Sir,
    >>
    In our organization these numbers are reversed. Meaning, the 10 digit number is xxx.xxx.xxxx is listed in the "Office" field of AD and the 4 Digit Extension is listed in the "Phone". With that said, we do have have different
    calling blocks. Meaning must of our numbers are:
    555.555.9xxx
    and 555.556.6xxx
    Based on my understanding , you are going to get a number from "Phone" such as 555.555.9xxx and get a 4 digit extention number . Then you want to get the latest three number of the "Extention" number then replace "xxx"
    to get a direct dial number and save it into AD .
    Do you mean the "Office" field and "Phone" field  are  "Office" and "Telephone number" in AD user properties :
    I would suggest you to use The method substring() to cut and connect the number .
    E.g. If you want to cut the  first three number  of 123456 the command may:
    $a="123456"
    $a.substring(0,3)
    Best Regards,
    Elton JI
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • My i phone 4 when recieving texts from i phone 4s contacts only shows their phone number not contact name.. why?

    this only happens in text messaging... i've tried re entering phone numbers etc but doesn't seem to make a difference...  even if i look up a name in contacts (their name in contacts is still as it was)  if i click the name and click send message or if they send me a text, all that shows up is their phone number.  anyone else seeing this problem? 

    This is strange, but a lot of strange things can happen with the phone when data or code get corrupted. Did you look at your contacts to see if they aren't corrupted or duplicated?
    I suggest trying the usual troubleshooting steps as needed to clear the problem:
    1. Reset phone - press home and sleep/wake buttons until the Apple logo appears.
    2. Restore phone in iTunes using a backup.
    3. Settings > General > Reset > Reset All Settings
    4. Restore as a new iPhone.

Maybe you are looking for