Calling BIP from Oracle Forms: Having Java version problem.

<h3>
Hi,
I tried to call a BIP report through Oracle Forms.
I followed this PDF.
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
Problem is, when I run the form, I get this error (copied from the Java Console)
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\channasiriwardena
Proxy Configuration: Manual Configuration
Proxy: 192.168.11.100:81
Proxy Overrides: *.iil.informatics.lk,192.168.11.*,192.168.10.*,<local>
JAR cache enabled
Location: C:\Documents and Settings\channasiriwardena\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0 Forms Applet version is : 10.1.2.0
java.lang.UnsupportedClassVersionError: oracle/j2ee/ws/client/ServiceFactoryImpl (Unsupported major.minor version 49.0)
I am using Forms Forms [32 Bit] Version 10.1.2.0.2.
JDeveloper Version is 10.1.3.5.0.
The Forms 10g Java version is 1.4.
So according to what I discovered on the net, the problem is: My JInitiator is 1.3 using JRE 1.3, BUT my .JAR file is Java 1.5.
Since we are using the Oracle JVM, ticking “Use JRE 1.5..” in the Advanced tab of the Internet Explorer Options has no effect.
We cannot upgrade the Oracle JInitiator to a 1.5 since there is no such JInitiator version. JInitiator is available only up to 1.3.1.30.
What can I do. What if I install Java 1.3 in my machine and re-compile my JAR file with that? Will that work or is there another solution?
Has anybody encountered this problem?
Any help would be greatly appreciated.
Thanks & Regards,
C.S.
</h3>

Hi,
Yes, you need to compile your source files with JDK 1.3 (since JInit 1.3.x.x uses JDK 1.3).
Other solution would be to use JRE 1.5 (instead of JInitiator).
Check out [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=550563] on how to use JRE1.5
-Arun

Similar Messages

Calling BIP from Forms: Having Java version problem

<h5> Hi,
I tried to call a BIP report through Oracle Forms.
I followed this PDF.
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
Problem is, when I run the form, I get this error (copied from the Java Console) </h5>
<h6>
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\channasiriwardena
Proxy Configuration: Manual Configuration
Proxy: 192.168.11.100:81
Proxy Overrides: *.iil.informatics.lk,192.168.11.*,192.168.10.*,<local>
JAR cache enabled
Location: C:\Documents and Settings\channasiriwardena\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0 Forms Applet version is : 10.1.2.0
java.lang.UnsupportedClassVersionError: oracle/j2ee/ws/client/ServiceFactoryImpl (Unsupported major.minor version 49.0)
</h6>
<h5>
I am using Forms Forms [32 Bit] Version 10.1.2.0.2.
JDeveloper Version is 10.1.3.5.0.
The Forms 10g Java version is 1.4.
So according to what I discovered on the net, the problem is: My JInitiator is 1.3 using JRE 1.3, BUT my .JAR file is Java 1.5.
Since we are using the Oracle JVM, ticking “Use JRE 1.5..” in the Advanced tab of the Internet Explorer Options has no effect.
We cannot upgrade the Oracle JInitiator to a 1.5 since there is no such JInitiator version. JInitiator is available only up to 1.3.1.30.
What can I do. What if I install Java 1.3 in my machine and re-compile my JAR file with that? Will that work or is there another solution?
Has anybody encountered this problem?
Any help would be greatly appreciated.
Thanks & Regards,
C.S.
</h5>

Hi
You dont need JInitiator, just downloading and installing either JRE or JDK 1.5 will be enough.
Another option might be to set the version you want to compile your classes against in JDeveloper. there is a setting in there to specify the java version you want to compile against.
So are you using the web services from BIP inside Forms?
Tim

Calling reports from oracle forms 9i

Hi
I succeded to call reports from oracle forms but for I have a problem for only one report so I can't call it. this a part of the code I'm using :
declare
     pl_id2 ParamList;
     pl_name2 VARCHAR2(30) := 'liste2';
v_rep VARCHAR2(100);
     rep_status VARCHAR2(20);
begin
pl_id2 := get_parameter_list(pl_name2);
if (Id_Null(pl_id2) )THEN
pl_id2 := Create_Parameter_List(pl_name2);
IF NOT Id_Null(pl_id2) THEN
     add_parameter(pl_id2,'mois',TEXT_PARAMETER,:mois);
END IF;
end if;
IF NOT Id_Null(pl_id2) THEN
if(:mois is not null) then
v_rep := RUN_REPORT_OBJECT('My_report',pl_id2);
message(v_rep);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
message('Error when running report');
END IF;
end;
the problem I've remarqued is that the function message(v_rep) is always returning the value :'repserver_0'.
so when I execute the previous code I'm getting the 2 messages : 'repserver_0' and 'Error when running report'.
Rq: the report my_report is running very well in report builder.
does someone see where is the problem so can help me??
thanx.

Hi,
This usually happens when the report fails on the report server. To obtain details on why a particular report has failed, use the showjobs page :
http://server.domain:PORT/reports/rwservlet/showjobs?server=repserver
and check the detailed error occured.
This is logged as Bug:3017948. It is marked to be fixed in version 9.0.4 (Reports 10g) and also has one-off patches for version 9.0.2.3 on Windows platforms. If you need further assistance about patches, please raise a Service Request (SR) with Support via Metalink (http://metalink.oracle.com).
Regards,
-Bulent

Problem calling WebService from Oracle Forms created by JDeveloper

Hi All,
I am trying to call a Webservice from Oracle Form using JAVA Class created by Oracle JDeveloper.
The Java Function (in JDeveloper) is as follows:
public Vector GetPIValue(String TagName, String ReadingTime) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
requestBodyEntries.addElement(TagName);
requestBodyEntries.addElement(ReadingTime);
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.send(endpointURL, "http://tempuri.org/GetPIValue", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
return responseBody.getBodyEntries();
When this Class is Imported into Oracle Forms the Function is converted into the following PL/SQL code:
FUNCTION GetPIValue(
obj ORA_JAVA.JOBJECT,
a0 VARCHAR2,
a1 VARCHAR2) RETURN ORA_JAVA.JOBJECT IS
BEGIN
Message('param passed: '||a0||' - '||a1);
cls := JNI.GET_CLASS('oracle/forms/demos/webservice/ConnectToPIStub');
mid := JNI.GET_METHOD(FALSE, cls, 'GetPIValue', '(Ljava/lang/String;Ljava/lang/String;)Ljava/util/Vector;');
args := JNI.CREATE_ARG_LIST(2);
JNI.ADD_STRING_ARG(args, a0);
JNI.ADD_STRING_ARG(args, a1);
Message('I am Here');
RETURN JNI.CALL_OBJECT_METHOD(obj, mid, args);
END;
When I am calling this Function from Within Forms and Passing into it the Parameters, I am displaying some Debugging Messages. When the Code reaches "JNI.CALL_OBJECT_METHOD" there is NO RESPONSE from the Webservice and nothing is moving forward after this Point...
A similar Webservice that can be Tested is:
http://www.webservicex.com/CurrencyConvertor.asmx
with WSDL file:
http://www.webservicex.com/CurrencyConvertor.asmx?wsdl
Kindly note that this Webservice is running properly from the Web Browser but the call from Oracle Forms is not Succeeding!!!! :-((
Any help is much appreciated.
Regards,
Baz

Hi,
Yes, you need to compile your source files with JDK 1.3 (since JInit 1.3.x.x uses JDK 1.3).
Other solution would be to use JRE 1.5 (instead of JInitiator).
Check out [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=550563] on how to use JRE1.5
-Arun

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Calling Report From Oracle Forms

Hi
I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that temporary table. The problem is, we can not view the data of an other session if we are using temporary table. When i call report from that form a new session get created due to which i can not see the data. Is there any method of calling report from oracle form that a same session is used to run the report?
Thanks.

As you mention Forms and Reports do not share the database session. I had the same problem and resolved it using record groups and DATA_PARAMETER to transfer data from Forms to Reports. You could also read the Note 110495.1 on Metalink to find useful information regarding this issue.
Adi

Call APEX from Oracle*Forms

My first APEX
I have "built" a APEX-Application to upload and download documents (APEX advanced tutorial).
It works as a stand-alone-solution.
Now I want to call this APEX-Form from Oracle*Forms (web.show_document(url))
I found that I can call a specific Apex-Page by application-id and page-Number.
But APEX still asks for Username/ Password. And I want to transfer some other parameters to apex.
The url I could hide. I also think about encryption/ time-stamp mechanism.
I think there should be a standard-mechanism.
But now I am in doubt: Is this possible at all?

hi Scott.
i actually developed a javabean to communicate with a mikrotik router and it works very nice on Oracle forms 10g !
but i need to develop an mobile interface for users , so i am using apex to accomplish this task, but i will need to call the javabean from apex.
thanks

How to configure and call Jasperreport from Oracle Forms 10gr2

Dear All
Please help me in configuring Jasperreport with Oracle Forms 10gr2 or AS.
And also tell me how to call a report from Oracle Forms.
Thanks

I have a pro*c precompiled program on unix server (unix environment) and I want to execute or running it from oracle forms, release 4.5 on MS Windows.
how do i execute or running it from oracle forms, release 4.5 ? please tell me what the command (syntaxs) is and all about it ?you can mail me at [email protected]
thank's

Invalid ID calling report from oracle forms 10 G

Hi, I have a problem during calling a report object 10g from a FORM, the source code is below the message, an the error message is can't not find PLAN_FUZZY (my report module name)...... WHY ???
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     Rep_status VARCHAR2(20);
BEGIN
     repid := FIND_REPORT_OBJECT('PLAN_FUZZY');
     V_rep := RUN_REPORT_OBJECT(repid);
END;

hey,
May i know have u attached the report to your form???
i think the best way is using RUN_OBJECT method
Run_Product(REPORTS, 'report_path', SYNCHRONOUS, RUNTIME,
FILESYSTEM, NULL, NULL);
if your report is at reportxx folder then you can just write report file name.
Hope it will help you.

Urgent: Calling Reports from Oracle Forms 10g (10.1.2.0.2) fails

Problem displaying a report from within Oracle 10g forms.
After a lot of work, we are able to access and actually display a report directly from Internet explorer and view the report from the report server as well.
The successful url was:
http://york.vrc.virginia.gov:7778/reports/rwservlet
?report=/u01/app/oracle/produ ct/vrcmidtier/reports/vrc/pmw41051.rdf
&userid=vrcpr/vrcpr@vrctest&destype=cache&desformat=HTML
The form displays correctly back to the screen
When executing from within the form, however, the report runs but does not display back to the screen.
Forms Steps so far:
created a report object called pmw41050
static parameters are:
file name: /u01/app/oracle/product/vrcmidtier/reports/vrc/pmw41051.rdfination format
execution mode: batch
communication mode: synchronous
destination name; null
destination format: HTML
reportserver:: vrc_york_midtier
Built a when button pressed trigger as follows:
declare
l_report_file varchar2(200);
l_report_id REPORT_OBJECT;
l_report_status varchar2(200);
begin
-- capture the report
l_report_file := 'pmw41051';
l_report_id := find_report_object(l_report_file);
-- set the parameters for this output
set_report_object_property(l_report_id, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property(l_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(l_report_id, REPORT_DESTYPE, CACHE);
set_report_object_property(l_report_id, REPORT_DESFORMAT, 'PDF');
set_report_object_property(l_report_id, REPORT_SERVER, 'rep_york_vrcmidtier');
set_report_object_property(l_report_id, REPORT_OTHER, 'PARAMFORM=NO');
set_report_object_property(l_report_id, REPORT_DESNAME, 'DESNAME');
-- and run the report
l_report_status := run_report_object(l_report_id);
-- monitor progress
while l_report_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
l_report_status := report_object_status(l_report_status);
end loop;
message('back from the report'); -- test message for return
end;
The report executes without error (as indicated by the message on the last line) but does NOT display back to the screen
checking the rwservlet/showjobs verifies the report completed and the reportcan be displayed from there.
So, bottom line: how to make a 10g form call report and display it on the screen?

Thanks MIke for your feedback...
Will this surfice?
Procedure Test_Report Is
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;

Call a web services from oracle forms 10

I have to call a web services from oracle forms.
The version of the database is oracle 11gr2. the version of the forms is 10.1.2.0.2.
I allready did the proxy creation and the import class within forms.
I have 2 questions:
1.
I created the following procedure:
PROCEDURE call_WS IS
vobject1 ORA_JAVA.JOBJECT;
vobject2 ORA_JAVA.JOBJECT;
BEGIN
vobject1 := WSEvaluarReglaCondicionComerci.new();
vobject2 := WSEvaluarReglaCondicionComerci.listarValoresAtributoEvento(vobject1, 702, 2217, null, null, null);
END;
the function I calling:
FUNCTION listarValoresAtributoEvento(
obj ORA_JAVA.JOBJECT,
a0 ORA_JAVA.JOBJECT,
a1 ORA_JAVA.JOBJECT,
a2 ORA_JAVA.JOBJECT,
a3 VARCHAR2,
a4 ORA_JAVA.JOBJECT) RETURN ORA_JAVA.JOBJECT;
Note that the parameters is ORA_JAVA_JOBJECT and I need to send numbers. I understand that when I import the classes, because in the WS those parameters are defined as BigDecimal, Forms understand them as java object but when I compile it reports the error: "numero o tipo de argumento erroneo al llamar..." type error.
So the question is, how Cast the numbers to Java Object to send them.
I have read in a web page that one option is to change in the web service the type of the parameters but that is not an option.
2.
The WS returns a super big XML as answer, so how I can parse the result into an Object type?...
The object structure is:
TYPE opciones_obj AS OBJECT
(strindice VARCHAR2 (4000),
nombrecompleto VARCHAR2 (4000),
nombre VARCHAR2 (4000),
strtipodato VARCHAR2 (4000),
codigoopcion NUMBER,
floatval FLOAT,
strtipo VARCHAR2 (4000),
strval VARCHAR2 (4000));
and the tags to extract is:
COLUMNS strindice VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strIndice"]/ns2:value',
nombrecompleto VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="nombreCompleto"]/ns2:value',
nombre VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="nombre"]/ns2:value',
strtipodato VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strTipoDato"]/ns2:value',
codigoopcion NUMBER
PATH 'ns2:mapEntry[ns2:key="codigoOpcion"]/ns2:value',
floatval FLOAT
PATH 'ns2:mapEntry[ns2:key="floatVal"]/ns2:value',
strtipo VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strTipo"]/ns2:value',
strval VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strVal"]/ns2:value') x;
xquery / xmltype aparently is not an option because the xml is too big.
I will appreciate your answers.
Thanks.
Edited by: user13058213 on 26-ene-2012 16:02

i created jar file to call it from forms
Could you be a little bit less vague about what you exactly did?
Anyway; see here http://bit.ly/10VVoMR
cheers

How to access environment variables from Oracle Forms

Hi,
Any idea how to use the Environment variables from Oracle Forms.
My basic problem is that from Oracle form I am calling Batch file which calls excel file with a macro.
So i want to check whether the macro was successful or not.
So in my batch file i will set %errorlevel% which I should be able to read from Oracle Forms.
I am able to read the registry from oracle forms, so is there anyway to read environment variable as well?
Thanks!
Avinash.

Hello,
Use the TOOL_ENV.Getvar() built-in
Francois

Calling Java Script to open a Map (Like Google Map) from Oracle Forms 10g

Hello,
We are on Oracle EBS rel 12, Forms 10g. We have a requirement of calling a Custom Map application (Like Google Maps) from Oracle Forms 10g.
When the user enters the address like town, city, country etc and clicks on a button there should be a call to this Google Map like application which will pass the co-ordinates (Latittude, Longitude) to the map and shows the place on it. If the user selects a different location on this maps and closes the window the parameters co-ordinates (Latittude, Longitude) should be back in the calling form and this new location should replace the original location.
I appreciate if I can get some help for the above requirements.
Thank you.
GM

Thank you for your reply. I was reading on the metalink that we could use the to call the java script from oracle Forms 10g (Doc ID 265863.1)
Example:
WEB.SHOW_DOCUMENT ('javascript:void(window.open("http://www.oracle.com","","location=no,toolbar=no,menubar=no,status=no,"));self.close()','_blank');
I tried it but it did not open the any window as it claims. Am I missing anything? Is there any IE related setting which I need to modify for the above to work?
Regards
GM

Calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to Oracle Reports 1

Hi
While calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to Oracle Reports 11g patch set 2(11.1.1.3.0) I found unable to run report error
But its finely working in 10g. The Place of error is in find_report_object
Is any solution to resolve this problem like any registry setting or patches to solve this problem
Please guide me
Regards
Murali N S

I was able to download it from this link:
[http://download-llnw.oracle.com/otn/java/jdeveloper/11.1.1.3.0/jdevstudio11113install.exe]
on the general 11g Fusion download page at:
[http://www.oracle.com/technology/software/products/middleware/index.html]
Although the site does appear to be having problems. I got intermittent errors of the page/server not being available.

Calling Web Service passing xml from Oracle Forms

Hello,
I need to call a .net web service from Oracle Forms that passes in xml data and returns xml data.
I have seen several examples of how to create a wrapper in jdev and then to import the code
into forms. I just have not seen any examples that are passing parmameters especially not xml
as a parameter and that have an active wsdl that I can see how it relates to the code created.
I have a wrapper but cannot figure out where and what notation to use to include passing in
an xml object.
Does anyone have an example passing in xml where the wsdl is still available to see?'
Forms version 10.1.2.0.2. Jdev 10.1.3.4
Thanks,
Linda
Edited by: lboyce on Jan 5, 2009 2:30 PM

Also here you have several options...
1. you can make a PJC (bean) which include a webservice stub generated with axis (you can make a stub and also test a webservice with this tool: www.soapui.org)..
2. you can make a database webservice with JPublisher and then just call a pl/sql wrapper for this webservice
4. you can call a webservice with java api (HttpsURLConnection, HttpURLConnection or with apache HTTPClient api) from your PJC for example:
the code below is used as java stored procedure to call a .net webservice on https
====================================
public static int getPStopnja(String polica, String reg_oznaka,
String ime_osiguranika,
String naziv_osiguranika,
String leasing,
String[] doc) {
String l_polica="";
String l_reg_oznaka="";
String l_ime_osiguranika="";
String l_naziv_osiguranika="";
String l_leasing ="";
URL url = null;
HttpsURLConnection conn = null;
BufferedReader br = null;
String lineIn = null;
StringBuffer sb = new StringBuffer();
OutputStream os = null;
int rc = 0;
//kontrole
l_polica = polica==null ? "":polica;
l_reg_oznaka = reg_oznaka==null ? "": reg_oznaka;
l_ime_osiguranika = ime_osiguranika==null ? "": ime_osiguranika;
l_naziv_osiguranika = naziv_osiguranika==null ? "": naziv_osiguranika;
l_leasing = leasing==null ? "": leasing;
String body = "<?xml version=\"1.0\" encoding=\"utf-8\"?>";
body += "<soapenv:Envelope xmlns:soapenv=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:web=\"https://services.huo.hr/web_ao/\">";
body += "<soapenv:Header/>";
body += "<soapenv:Body>";
body += "<web:get_pstupanj>";
body += "<web:param_in>";
body += "<web:polica>"+l_polica+"</web:polica>";
body += "<web:reg_oznaka>"+l_reg_oznaka+"</web:reg_oznaka>";
body += "<web:ime_osiguranika>"+l_ime_osiguranika+"</web:ime_osiguranika>";
body += "<web:naziv_osiguranika>"+l_naziv_osiguranika+"</web:naziv_osiguranika>";
body += "<web:leasing>"+l_leasing+"</web:leasing>";
body += "</web:param_in>";
body += "</web:get_pstupanj>";
body += "</soapenv:Body>";
body += "</soapenv:Envelope>";
SSLContext sslContext = null;
try {
sslContext = SSLContext.getInstance("TLS");
X509TrustManager[] xtmArray = new X509TrustManager[|http://forums.oracle.com/forums/] { xtm };
sslContext.init(null, xtmArray, new java.security.SecureRandom());
} catch (GeneralSecurityException gse) {
doc[0] = gse.toString();
return -1;
if (sslContext != null) {
conn.setDefaultSSLSocketFactory(sslContext.getSocketFactory());
try {
conn.setDefaultHostnameVerifier(hnv);
} catch (Exception ex) {
doc[0] = ex.toString();
return -1;
try {
URL st = new URL("https://services.huo.hr/web_ao/web_ao.asmx");
conn = (HttpsURLConnection)st.openConnection();
conn.setRequestMethod("POST");
conn.setRequestProperty("Host", "services.huo.hr");
conn.setRequestProperty("Content-Length", "" + body.length());
conn.setRequestProperty("SOAPAction",
"\"https://services.huo.hr/web_ao/get_pstupanj\"");
conn.setRequestProperty("Content-Type", "text/xml;charset=UTF-8");
conn.setDoOutput(true);
OutputStreamWriter wr =
new OutputStreamWriter(conn.getOutputStream());
wr.write(body);
wr.flush();
BufferedReader in =
new BufferedReader(new InputStreamReader(conn.getInputStream()));
String inputLine;
while ((inputLine = in.readLine()) != null) {
sb.append(new String(inputLine.getBytes(),"UTF-8"));
in.close();
//System.out.println(new String(sb.toString().getBytes(),"ISO8559_2"));
doc[0] = sb.toString();
return 0;
} catch (Exception e) {
doc[0] = e.toString() + " ===> " + body + " ==>length= " + body.length();
return -1;
====================================
best regards
Edited by: Peterv6i on Jan 6, 2009 8:34 AM
Edited by: Peterv6i on Jan 6, 2009 8:40 AM

Calling BIP from Oracle Forms: Having Java version problem.

Similar Messages

Maybe you are looking for