Calling card services

Can anyone please advise me on what equipment will be needed to set up a calling card business? Basically terminating calls at my premises and routing them to the service provider.

Devices called access servers and Media Gateway are used for calling card services.Some of the access servers are
AS5350, AS5350XM,A5400,AS5400XM.Refer http://www.cisco.com/en/US/products/hw/iad/index.html for more information.

Similar Messages

Billing Software for Prepaid Calling card

Hi Netpros,
I intend to implement a Calling card platform on Cisco 3640.I have got Cisco 3640, TFTP server for the Prompts etc.The only thing I need is any Evaluation/trial Copy of a third Party Billing Software which can supports VSA so that I can test my setup before buying any third Party Billing Software.I want to Simulate and Test the Setup first.Can anyone help me please with any Trial/Evaluation copy of the Billing Software....

Wafer System is cisco's golden partner, has one billing product and solution for prepaid calling card service, you can check http://www.wafersystems.com, or drop one mail to [email protected]

HT1349 I have purchased itunes card whenever enter the card number asking me to call customer service and treatment sinners

I have purchased itunes card whenever enter the card number asking me to call customer service and treatment sinners

Do as it says and contact customer service instead of posting to these user to user technical support forums.

Jsafe unsatisfied link error calling CyberSource credit card service for Weblogic Server 5.1 on Linux

Hi,
I'm running Weblogic Server 5.1 on Linux, when we make CyberSource credit card request, the server console shows errors: jsafe unsatisfied link: jsafe not found in java.library.path .....
However, when we run Weblogic Server 5.1 on Window 2000, it does not show any errors and goes well with CyberSource credit card services.
Anybody can help me?
Thanks!
Jean

Did you modify your scripts to actually use SP6?
jean chen wrote:
>
I just applied service pack 6 (weblogic510sp6.zip) on my WLS on Red Hat Linux 6.1, it still shows the same error in weblogic server console. I saw newsgroup Install section somebody said it is a RSA bug and BEA is working with them to fix it and right now just ignore the error print stack, is that true?
Jean
"Jesus M. Salvo Jr." <[email protected]> wrote:
Service Packs include filss for all supported platforms, including
Linux. I am using them here.
John
jean chen wrote:
Jesus,
I'm running Weblogic on Linux, is there any SP6 for this platform at all?
Thanks!
Jean
"Jesus M. Salvo Jr." <[email protected]> wrote:
That error about "no jsafe" occurs if you have not applied any service
pack at all ( as you have said ). Get the latest SP ( SP6 ) and it
should go away.
John
jean chen wrote:
I have weblogicaux.jar in my Java CLASSPATH and Weblogic CLASSPATH, but I put it together with my other jar files under another directory instead of lib directory
Jean
"Alf" <alf> wrote:
Do you have /lib/weblogicaux.jar in your classpath? COM.rsa.jsafe is found
in this file.
"jean chen" <[email protected]> wrote in message
news:[email protected]...
Hi,
I'm running Weblogic Server 5.1 on Linux, when we make CyberSource creditcard request, the server console shows errors: jsafe unsatisfied link: jsafe
not found in java.library.path .....
However, when we run Weblogic Server 5.1 on Window 2000, it does not showany errors and goes well with CyberSource credit card services.
Anybody can help me?
Thanks!
Jean
Jesus M. Salvo, Jr.
Senior Consultant
PowerServe Pty Ltd
Level 2, 116 Miller Street
North Sydney 2060
New South Wales, Australia
Ph: (61-2) 9492 4800
Direct (61-2) 9492 4853
Fax: (61-2) 9492 4899
http://www.powerserve.com.au
Email: [email protected]
This email is from PowerServe Pty Limited (ACN 069 037 056)
The information contained in this email (including any attached files)
may be privileged and confidential intended for the use of the
person/persons named above. If you are not the intended recipient, you
are advised that any use, distribution or copying of the information is
strictly prohibited. If you have received this transmission in error,
please notify PowerServe Pty Limited immediately on (61 3) 9618 1222 or
reply by email to the sender.
PowerServe Pty Limited does not represent or warrant that this email or
any attached files are free from computer viruses or other defects. Any
attached files are provided, and may only be used, on the basis that the
user assumes all responsibility for

Program dialling for a calling card?

I use a pre-paid calling card that has the dialling sequence:
1) Unhook, dial 4 digit number to call the service (1544)
2) Wait about 6 seconds
3) Dial "2" to select English
4) Wait for prompt to send 12 digit card number followed by "#"
5) Dial required international number followed by "#".
In iOS5, this sequence in stored in Contacts worked fine: 1544,,,2;123456789012#
In iOS6 it fails nearly every time. What's changed? Where can I find the latest dialling command codes?

To answer my own question, there aren't any codes, just "pause" and "wait" available when editing phone numbers in Contacts. These are documented in iOS 5 but not in iOS 6, so it's impossible to debug my problem. Also, Apple makes the * and # characters unavailable to apps, so no dialler app can fix my problem either. Thanks, Apple. However, I did find a solution, its called Nokia.

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, a

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, after some time on the phone i was told by the csr and supervisor that their system is not allowing them to complete the transaction without changing to a limited data plan. I was told to try going to a store and buy the phone. Same thing happened. Has Verizon changed something and not told their employees?

Seems like people having this problem are those coming from a phone that doesn't have a nano SIM card...so when Verizon issues them one they end up changing their plan. No clue why this keeps happening but stay on top of them. As long as you initiated the request for your plan to be reinstated within the 14 day time frame they should put it back. Interested in seeing how this plays out. There is still one phone in my house that hasn't been upgraded (an iPhone 4). I'm hoping when we do upgrade it at full retail they won't mess with her unlimited data plan

Lenovo Credit Card Services

I received an email from Lenovo Credit Card services stating:
Dear Lenovo Customer,
We are currently trying to process your order number xxxxxx.
For security purposes, we require that you call your bank and have your shipping address added to your credit card file.
Once you speak to your bank, please call us at 1-800-426-3325 and we will attempt to verify the shipping address on your order with the bank.
If no response is received within 4 business days upon receiving this email, your order runs the risk of cancellation.
We appreciate your business and your prompt attention to this request.
I replied to the email asking the Rep to have the laptop shipped to the billing address because my bank said it would take 5-7 business days to add another address but have not gotten a reply, I have tried to call the phone number in the call and left a message but got no reply and I wanted an update on my order.

I spent two hours to address some issues that even my credit card company doesn't think it is a problem. My order has been cancelled because my shipping address is different from my billing address (absurd no.1). I called my credit card company, they told everything is great, they have already grant the payment. My thought is: what is the bloody problem?
Then i called Lenovo customer service and credit card team. They told me don't worry about it. As long as lenovo doesn't ship the order, they won't take my money. So I go online and try to place another order. Then, the webpage told me "unable to authorize the transcation."
Seriously?!
I called credit card team again and try to figure out what is really happening. The gentalman told me he doesn't know what is going on. The only job he does is verify the information...... I asked he which bloody department know what's going on, and he told me to place order with sales department.
This is a fortune 500 company, and nobody know why their customer can process payment online?! This is a bloody IT firm!
Place order through phone means I will lost my cash back, and I am a poor student who wait table to survive my college study. The cash back I lost is pretty much the money I will get by waiting table for whole day.
Please, some one told me where I can file a complaint. Unless, NOBODY from LENOVO knows where their customer can file complain online!

Calling Card Feature on GSM Phones

Does Anyone remember when you were able to buy outside long distance and international calling cards and program them into your Nokia Phone under the Calling card feature? I first learned about this feature when I once used a friends Nokia 6255i CDMA phone. WOW!!! This is a great feature! This allows you to use your own minutes and free minutes from your service provider to make very inexpensive international calls. Now I have Nokia 6131 and it is a very nice phone but does not have this great phone call feature. Is there any way to add this wonderful feature to my Nokia 6131? Can the calling card feature be downloaded and installed on my Nokia 6131? I wish Nokia would put this feature in every phone they make instead of only putting into CDMA phones.
ZhouWeiZ

Hi,
I would need to know if you have received any feedpack following your question.
I've used an old Sony Ericsson P800 with the CC application. Very usefull. Actually we have change all mobile by nokia E series but I cannot find any application for the CC quick use.
Do you have any info?
Thanks

Error while calling ejb service call from BPM service

Hi,
We are using the Oracle 11.1.1.5.0
We are calling ejb service call from BPM service to update the data to Oracle database.
We are getting the below error when we executing the ejb service call from BPM Service.
<Error> <EJB> <BEA-010026> <Exception occurred du
ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
articipant in two-phase commit. To force this participation, set the GlobalTrans
actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
/activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
Connection@EBSConnection_base_domain
JDBC driver does not support XA, hence cannot be a participant in two-phase comm
it. To force this participation, set the GlobalTransactionsProtocol attribute to
LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
= EBSConnection
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:239)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
Object.java:622)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
y(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
LocalBeanImpl.handleCallback(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
nce cannot be a participant in two-phase commit. To force this participation, se
t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
or EmulateTwoPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
.>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <failed to handle message
javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
be a participant in two-phase commit. To force this participation, set the Globa
lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
woPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
>
Could any body help on this issue.It is little bit urgent for us to resolve.
Thanks in advance.

Thanks Sudipto Desmukh,
The link is helpful me to resolve this issue.
Thanks,
Narasimha E

Calling web service from oracle forms 10g

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://gend:83/DesignService.svc?wsdl
The service was developed by us.
Calling the web service using JDeveloper works fine but when I complie in Oracle Forms it returns wrong number of types of arguments in call SENDHELLO.
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
xo ora_java.jobject;
rv varchar2(2000);
ex ora_java.jobject;
str varchar2(100);
BEGIN
jo := GendServiceClient.new;
rv := GendServiceClient.sendHello('Nora');
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message(Exception_.toString(ex));
END;
Any help/ideas on this is greatly appreciated. Thanks.
Edited by: KE Nora Loera on Jun 1, 2012 1:24 PM

My primary skill is PL/SQL but the only information I found on Oracle's site to call a web service from a 10g Form was creating a jar file and importing the java class. Since I don't want to ask our corporate IT to make changes on the UNIX box for the jar files I went a different route.
I use UTL_HTTP.BEGIN_REQUEST to call a URL then load I load the data to a table as a CLOB since we have more than 4000 characters. Now I need to parse the XML and load it into a form. I have never done this so if there is a helpful site please let me know. I have looked at several sites but none do what I want.
Thanks

Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://www.webservicex.net/CurrencyConverter.asmx?wsdl
Calling the web service using JDeveloper works fine but from Oracle Forms returns ORA_JAVA.JAVA_ERROR; Unable to call out to Java, Invalid object type for argument 1
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
rv ora_java.jobject;
ex ora_java.jobject;
outString varchar2(2000);
BEGIN
jo:= CurrencyConvertorStub.new;
--This will get the exchange rate from US Dollars to UK Sterling.
rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD');
message (float_.floatValue(RV));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
outString := Exception_.toString(ex);
message(outString);
END;
Any help/ideas on this is greatly appreciated. Thanks.

Yes, it is the message line - so basically this call fails => rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD'); and control goes in the exception block
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
Below is the code from java stub that was generated using JDeveloper by using web services stub/skeleton and associating the WSDL
public Double ConversionRate(String FromCurrency, String ToCurrency) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "ConversionRate";
String targetNamespace = "http://www.webserviceX.NET/";
Vector requestData = new Vector();
requestData.add(new Object[] {"FromCurrency", FromCurrency});
requestData.add(new Object[] {"ToCurrency", ToCurrency});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "http://www.webserviceX.NET/ConversionRate", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (Double)fromElement((Element)responseData.elementAt(0), java.lang.Double.class);
}

Call Custom Service from Event Receiver as Current User

Hello,
i bang my head on this problem for days now:
My custom web service hosted in Sharepoint 2013 needs to know the logged on user name. I used to have a self-written impersonation in my service client before, but with switching to claims authentication this should be obsolete.
So within my service i decode the user from
IClaimsPrincipal icp = Thread.CurrentPrincipal as IClaimsPrincipal;
IClaimsIdentity ci = (IClaimsIdentity)icp.Identity;
String User = ci.ToString();
This works well when i call the service from a custom aspx page.
It utterly fails when i call the service from a List Item Event Receiver. The User always is the Application Pool Account.
This is the Client code to open the Channel:
private void SetChannelFactory(
MyServiceApplicationProxy proxy,
Uri address)
if (null == proxy)
throw new ArgumentNullException("proxy");
if (null == address)
throw new ArgumentNullException("address");
// Check for a cached channel factory
string endpointConfigurationName = GetEndpointConfigurationName(address);// Get the endpoint configuration name
if ((null == s_ChannelFactory) || (endpointConfigurationName != m_EndpointConfigurationName))
lock (s_ChannelFactoryLock)
if ((null == s_ChannelFactory) || (endpointConfigurationName != m_EndpointConfigurationName))
// Create a channel factory without specifying an endpoint address
// so it can be cached and used for multiple endpoint addresses
s_ChannelFactory = new ConfigurationChannelFactory<IMyServiceContract>(
endpointConfigurationName, proxy.Configuration, null);
// Configure the channel factory for claims-based authentication
s_ChannelFactory.ConfigureCredentials(SPServiceAuthenticationMode.Claims);
foreach (var operation in s_ChannelFactory.Endpoint.Contract.Operations)
DataContractSerializerOperationBehavior behavior = operation.Behaviors.Find<DataContractSerializerOperationBehavior>() as DataContractSerializerOperationBehavior;
if (behavior != null)
behavior.MaxItemsInObjectGraph = 2147483647;
// Store the current endpoint configuration name.
m_EndpointConfigurationName = endpointConfigurationName;
private IMyServiceContract GetChannel(
MyServiceApplicationProxy proxy,
Uri address)
//Create Channelfactory
SetChannelFactory(proxy, address);
// Create a channel from the channel factory.
return s_ChannelFactory.CreateChannelActingAsLoggedOnUser(new EndpointAddress(address));
All research pointed out that "CreateChannelActingAsLoggedOnUser" would pass the current user (which is correctly identified within the event receiver!) to the service, but it doesn't work for my event receiver...
Any advice on this would be great!
With kind regards,
Joachim

You should be able to get the current user id from the SPListItemEventProperties object. From here you should be able to create a Claim. For example get the user by using
user = SPWeb.Users.GetByID(properties.CurrentUserId)
SPClaim claim = SPClaimProviderManager.CreateUserClaim(user.email, SPOriginalIssuerType.TrustedProvider, issuerIdentifier);
https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.administration.claims.spclaimprovidermanager.createuserclaim(v=office.14).aspx
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

How to make a PDF form call Web service and return a static pdf for user to print?

Hi all,
Can anyone help me regarding the feasibility of using PDF forms for my following case?
I would like to create a Dynamic pdf form. User only have the Acrobat reader. they can enter some information. Then have a submit button. when user click the submit button, it can call the web service with data. then Web service returns a Static PDF document based on data and the user can print it out. (and maybe save as separate pdf file)
1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
2. As I understand I need to have Live Cycle Designer to create a pdf and make it Reader Enabled. So user can user reader to call webservice? am I correct?
3. What minimum reader that user need to have? PDF reader 7 or above?
4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
Thanks a lot

We have done a similar approach in the past and yes, it can be doable.
1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
Srini: We have developed a Servlet to talk to Webservice. Based on the Webservice response, the Servlet, prepares the Byte stream and sends it to Webbrowser to display as a PDF. The PDF data was submitted to Servlet in XML format.
But if you do not want to use the above approach, then you have to use the Workbench Process.
Submit the PDF data to a Workbench process and the inside process, execute Webservice Service with the data. Once the response is received, prepare the data XML and render a PDF with it.
To do this, you need LiveCycle Server and Reader Extensions server component.
2. As I understand I need to have Live Cycle Designer to create a pdf and make it Reader Enabled. So user can user reader to call webservice? am I correct?
Srini: If you want to use the Servlet, you can Reader extend the PDF with Acrobat.. But if you want to submit the data directly to Webservice, then you need Reader Extensions server component.
3. What minimum reader that user need to have? PDF reader 7 or above?
Srini: Not sure but Reader 8 and above should work.
4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
Srini: If you use the Servlet approach, then you can re-use the same webservice. But if you want to submit directly to the same webservice, you may need to change it to suit your data XML.
5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
Srini: If you use the Servlet approach, you do not need any server component but other approach, you need Livecycle Server and Reader Extensions server component.
Thanks
Srini

Today my phone was stolen, so i called my service provider and had my account suspended. then i found it at a pawn shop, so i reactivated it. however, my phone says that it has no SIM and I am unable to send/recieve any messages. how can i fix it?

Today while I was at work my phone was stolen. After unsuccessfully trying to track down the kids who had it, I called my service provider and asked them to suspend my account. A short time later, I found my phone at a local pawn shop and called to reactivate my phone's service. The woman on the phone said that it should only take a few minutes to reactivate. However, a coworker also told me that whenever a theft gets reported to the service provider, apple puts your phone's serial number on a list that disables yours phone's re-enactment until the service provider confirms that the phone has been found. I'm not sure if this is true, but my phone should have been working a few hours ago, and it still says that there is no SIM everytime I try to send a message. Should I just wait it out or is it more likely to be at the fault of my service provider?
Thanks!

The SIM question/issue is separate from all of the others. Your iPhone will not access the cellular newtwork until you install a new SIM. The current SIM has been deactivated and is now useless. Get a new SIM, install it (or have it installed), then have your carrier grant the iPhone access to the cellualr network.

How to call Web Services (with javascript) in a view load event ?

Hello to the expert community,
I'm looking for a piece of javascript code allowing to call Web Services in a view load event ?
Any ideas will be really appreciated.
Regards.
Have a nice week.

Thank you for your answer, dongmei.
It seems that the MethodResultTableDataProvider does not return the response of the web service as a value field if the WSDL contains only one result element.
E.g. from WSDL of the USWeather Web Service which returns theGetWeatherReportResult string:
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://www.webserviceX.NET" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" targetNamespace="http://www.webserviceX.NET" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
    <s:schema elementFormDefault="qualified" targetNamespace="http://www.webserviceX.NET">
      <s:element name="GetWeatherReport">
        <s:complexType>
          <s:sequence>
            <s:element minOccurs="0" maxOccurs="1" name="ZipCode" type="s:string" />
          </s:sequence>
        </s:complexType>
      </s:element>
      <s:element name="GetWeatherReportResponse">
        <s:complexType>
          <s:sequence>
            <s:element minOccurs="0" maxOccurs="1" name="GetWeatherReportResult" type="s:string" />
          </s:sequence>
        </s:complexType>
      </s:element>
      <s:element name="string" nillable="true" type="s:string" />
    </s:schema>If I drag the web service method on the page and I should be able to select the response value in the Bind to Data dialog box. But there is no value field. Value fields only occur if the web service returns more than one value.
The question is how can I get the response GetWeatherReportResult from the service.

Calling card services

Similar Messages

Maybe you are looking for