CALLING DA NAM ......... Where is your FCE/FCP Getting Started Tutorial ?

I don't know whether Da Nam has dropped off the forums but last year he posted a BRIEF tutorial to get beginners started with FCE/FCP.
I have searched but cannot find that post.
Does anyone know where it (or anything similar) can be found ?

this maybe -
http://discussions.apple.com/thread.jspa?messageID=4446370&#4446370

Similar Messages

  • HT1212 where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    You use iTunes and restore the phone from Recovery Mode. You will lose all content. http://support.apple.com/kb/HT1808

  • Where do I find the Getting Started pdf

    I keep seeing RTFM but I can't find TFM. I'm looking for the Getting Started pdf that I keep reading about but it can't find it on this site and its not on my install DVD.
    Thanks

    Hi there,
    Go to this page and type in "logic express" (with the quote marks). There isn't, as far as I know, a manual called Getting Started with Logic Express but you will find Reference, What's New, Plug-ins etc. The Gettign Started book is for Logic Pro but it will certainly help with the early days in Logic Express
    http://www.apple.com/support/manuals/
    Have fun!
    Pete

  • HT5035 I had a balance of $5.30 on my account. It disappeared when I added a $25 gift card. I have tried to get this issue resolved thru email. I need a call back. Where do I look to get a call back number for this issue

    I have already contacted apple thru email, twice. I don't see that they have an option for a call back for a missing iTunes balance, I did however see where I could get a call back(and did) for not being able to sign in on another device to make a purchase. This problem was resolved quickly for this device. I told this rep about the unresolved problem of the missing iTunes balance and he said he could transfer me but the wait times are very long. In my 2 email correspondences on this missing balance issue both times I was told to check my balance history- which does not resolve the issue that I am having to go thru a huge hassle to get my missing balance back prior to my card purchase. I had a balance of $5.86 show on my ipad2 and on my Mac book pro prior to applying the $25 gift card. Then the balance showed only $25 after apply my gift card, now here's what's weird: aprox. A week and a half later I sign in on my iPod touch and shows a balance of $5.30!, but when it has me resign into iTunes that balance disappeared, and the $25 gift card balance shows up. I made NO PURCHASES to use the $5.86/ or $5.30- so I want my money to equal $30.30/ or $30.86 as it should, and I want to not go thru so much to take care of it. To just hope Apple would have a call back option for this type of issue. I won't be buying iTunes gift cards or purchasing thru iTunes if my balance disappears when I do so.

    When you tried to contact Support with the card's images how were you trying to do it, on your phone or a browser on your computer ? And have you tried a different browser to see if you get the same error message ?
    As well as images of the card they might also want an image of its receipt.
    And to contact Support you were using : http://www.apple.com/support/itunes/contact/ , and clicked on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes ?

  • So You Think Your Computer's Not Powerful Enough For FCE/FCP !!!!!

    It's NOT a question - just some sobering thoughts!
    How many times do we get worried owners asking whether the Mac they have or the one they intend to get will have enough power to operate FCE/FCP?
    So I trawled through the history books - otherwise known as back-copies of Macworld and this is what I discovered.
    Final Cut Pro was released in April 1999. At that time the most powerful Macs had the following specification:-
    G3 450MHz processors.
    OS 8.6
    Couldn't find the HD size but guess it was around 20GB.
    All this power cost over £2,000 !
    Now I know that the latest versions of FCE/FCP have additional features, but if we disregard HD processing the latest are not that much different from the original.
    So has anyone, even those that buy the puniest Mac-Mini, got anything to really worry about?
    Ian.(Who sets cats amongst pigeons).

    I have a 1Ghz, G4 Powerbook w/768MB RAM and FCEHD runs beautifully. I also successfully use DVDSP2, Compressor, Cinema 4d 9.52, AE6.5Pro and RealFlow3. Motion 1 causes some crashes when I try to use particle effects and some AE based plug ins, but it does work for basic stuff.
    OK, bragging over

  • TS2446 Why do you now ask for radiculas security questions all 4 of them ie whenY where did you have your first kiss or name of your 1st teacher or where did your parents meet?  Some clients are either too old or grew up in care or are dyslexic.tmi

    Why do you ask too many   Radiculas security questions like Where was your first kiss or where we're.you on 1st jan 2000!? Not every one remember!

    Go to this link and select 'Manage your Account'
    Sign in and look for 'Security and password', you can select to create your own security question.
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • Z10 pairing 2013 Toyota entune, Z10 caller-id Name, Z10 add in-coming call to Contacts, Z10 latest bootleg s/w Rel 10.1.0.2006 now, Z10 visual vm

    July 3, 2013 :
    (1)  Spoke to Toyota Technical Support today about 2013 Toyota entune, had them gooogle "wiki BlackBerry Z10" had them, then, to click 3rd one down on google listing : " BlackBerry - Wikipedia, the free encyclopedia " had them, then, see picture of my BlackBerry Z10 and under it on the right side 5th item down see and read to me : " Units shipped 200 million "
    Toyota states they are working on their 2013 Toyota entune included for 36 months which integrates iPhone V and Samsung Galaxy Android but no BlackBerry to Navigation, SmartPhone usage, e-mail to Z10, read e-mail while driving Z10, and Contacts with address to extend 100 maximum limitation into 2013 Toyota Navigation on-board silly memory, USB support to Z10 with the USB plug provided, POI points of interest on Navigation where you click it and it dials the phone number on record of every business selected by 200 categories gas dentist doctor pet doctor groceries bakery restaurant shopping mall motel camping grounds RV hook-up etc.
    (2) T-Mobile currently supports 10.1.0.2006 but I have loaded on previous BlackBerry products bootleg updated s/w releases which worked perfectly well and solved many of my previous issues on the 10 or so previous BlackBerry products I’ve owned since BlackBerry became the choice for users where security is the main purpose for business users, not mp3 listening to music for Apple which is just an over-priced under-technology product with lots of apps all of which I am complaining about in this post.
    I’d like to do that again now, and see if any of these issues we all are having are being worked on in the least by BlackBerry.  Where can I get instructions of where to download whatever is the bootleg people know does fix at least 1 of these issues, please ?
    (3) In-coming calls show only phone number.  Never had a BlackBerry like that, ever.  Understand this is a known bug, while others waste your time with swipe down from Phone App and Click Settings and Click one of the 13 settings in there such as SMART DIALING and do something with the 3 area codes local calls where I live and something with National Number Length also not explained where it can be corrected doing that.  I need to see the caller-id name and number, some folks refer to as Deluxe Caller-ID.  Number and name, not just the number.  No idea who is calling me, ever.
    (4) Take in-coming call and press the number in the PHONE LOG on Phone App, and it calls the customer back.  I want to save the number to CONTACTS and either choose a contact to add it to, or have multiple listings for the same contact where I see one has a number and one just the e-mail I added.  I am still not satisfied with the add new contact every time I add via e-mail address when I already have the e-mail address and want to see it.  But, at least I can add contacts to the several thousand I deal with and at least have them in there twice.  That’s a start.
    (5) Visual Voice Mail, I am now paying for at T-Mobile.  And, I have programmed it on on the Z10.  What is Visual vm ?  If I have it, where do I see it ?  What is it the Z10 provides on visual vm ?
    (6) There must be an updated manual from the lackluster manual I downloaded when I upgraded from the BlackBerry Bold 9780 to Z10 which goes into a lot more detail than the one I downloaded, printed and went through to get to where I’m at, which is
    Still after many months now, having a Z10 phone which :
    (1) does nothing with 2013 Toyota entune ?
    (2) must have a bootleg solid s/w release I can load with instructions ?
    (3) in-coming caller phone number and Name, not just # ?
    (4) Phone Log App click last in-coming call and Add to Contacts ?
    (5) Visual vm turned on both carrier and settings and not seeing it ?
    (6) latest manual on Z10 which someone surely has updated to address these issues
    Anyone else having these issues items (1) through (6) ?
    Give Thumbs-Up if helps you, or say Solution Accepted, or say Like.
    Solved!
    Go to Solution.

    My pleasure. And, I'm a guy. I'll look through my settings when I have a chance later today. Have a good one.

  • What Is The Legal Situation With Upgrades And The Original Copy Of FCE/FCP?

    Imagine you have an original copy of FCE/FCP.
    You buy an Upgrade and of course use your original serial number to make it work.
    You then register the new product with Apple.
    Can you then sell your original version and keep your legal entitlement to use the Upgrade?
    This question arises from an advert I have just seen on eBay where it looks as though the seller is doing precisely that (if you read their reasons for selling).
    Final Cut Suite
    Ian.

    Hi Ian,
    The answer is NO. It would not be legal for either the seller or the purchaser (assuming the seller purchased & applied an Upgrade to his original installation instead of purchasing a whole new copy with its own full license).
    In the packaged software world, when you purchase an Upgrade you are only purchasing a license to upgrade from a previously legally owned & installed copy of the software. When you enter the serial number of the previous copy you are identifying that copy. Regardless of whether or not Apple actually tracks the serial numbers, your upgrade license requires you to be the continuing owner of the original license in order for your upgrade license to be valid.
    Under the circumstances as they appear in this eBay transaction, the seller would legally lose both their original and upgrade licenses and the purchaser would be illegally installing a previously licensed software package.
    The only way to conduct a legal transfer of license would be to deinstall the original software before selling. Of course, that means you would no longer have the software to use yourself.

  • Getting calling class name

    Hi,
    I have a project where it is imperative that i know the calling class and the called class name. I have a solution working where i place the caled class on a stack and record it as a possible calling class. However there must be a simpler means of doing this. My code is poor. Is there a method of getting the calling class on a classPrepareEvent so that i have the class and the calling class.
    regards
    ciaran

    I suggest you start by taking a look at the example source code
    for the trace application, which is described here:
    http://java.sun.com/products/jpda/examples.html
    The example source code is included in your J2SE 1.4.xx bundle
    under the demo directory. Look in $JAVA_HOME/demo/jpda/examples.jar
    To compile or run the examples, you need to add
    $JAVA_HOME/lib/tools.jar to your classpath.
    After you unpack examples jar, look for
    com/sun/tools/example/trace/Trace.java

  • (Continuity) Caller Id name not appearing in mac

    Hi every body
    I face problem with some calls, the  Caller Id name sometimes not appearing in incoming call for mac (Continuity) only numbers.
    Please note that all the calls i get it has name in my contacts and it's already in iPhone and mac contacts app.
    Any ideas how to fix it.

    Thanks for all your reply,
    I found that we have Avaya Definity System with S8700 & found configuration documentation :
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/410364av.pdf
    What I found that Avaya side is configured for Qsig ; Basic Supplementary Services is not enabled (System Parameter & Customer options) .
    I also found this document ( http://www.svcc.cc.il.us/UserMenu/employees/telephone/images/buttons.pdf Page 362) about Supplementary Service protocol value which most likely change which Qsig Avaya side use.
    Once again thank you all , will let you know if things work .

  • Help:alternate for calling function in where clause

    Hi ,
    In below query i'm calling function in where clause to avoid COMPLETE status records,due to this query taking 700 secs to return result.If i'm remove below function condition it's returning results with in 5 secs.Can you some one advice to any alternate idea for this?
    WHERE mark_status != 'COMPLETE'
    SELECT assessment_school,
      subject,
      subject_option,
      lvl,
      component,mark_status,
      mark_status
      NULL AS grade_status,
      NULL AS sample_status,
      :v_year,
      :v_month,
      :v_formated_date,
      :v_type,
      cand_lang
    FROM
      (SELECT assessment_school,
        subject,
        subject_option,
        lvl,
        programme,
        component,
        paper_code,
        cand_lang,
        mark_entry.get_ia_entry_status(:v_year, :v_month, assessment_school, subject_option, lvl, cand_lang, component, paper_code) AS mark_status
      FROM
        (SELECT DISTINCT ccr.assessment_school,
          ccr.subject,
          ccr.subject_option,
          ccr.lvl,
          ccr.programme,
          ccr.language AS cand_lang,
          ccr.paper_code,
          ccr.component
        FROM candidate_component_reg ccr
        WHERE ccr.split_session_year = :v_year
        AND ccr.split_session_month  = :v_month
        AND EXISTS
          (SELECT 1
          FROM IBIS.subject_component sc
          WHERE sc.year          = ccr.split_session_year
          AND sc.month           = ccr.split_session_month
          AND sc.paper_code      = ccr.paper_code
          AND sc.assessment_type = 'INTERNAL'
          AND sc.subject_option NOT LIKE '%self taught%'
          AND sc.component NOT IN ('PERFORMANCE  PRODUCTION','PRESENTATION WORK','REFLECTIVE PROJECT','SPECIAL SYLLABUS INT. ASSESSMENT')
        AND NVL(ccr.withdrawn,'N') = 'N'
        AND ccr.mark_status       != 'COMPLETE'
        AND EXISTS
          (SELECT 1
          FROM school s
          WHERE s.school_code   = ccr.assessment_school
          AND s.training_school = 'N'
    WHERE mark_status != 'COMPLETE';

    One thing you can test quickly is to put the function call in it's own select ...from dual.
    This might make a difference.
    However, only you can check this, I don't have your tables or data.
    So, what happens if you use:
        paper_code,
        cand_lang,
      (select mark_entry.get_ia_entry_status(:v_year, :v_month, assessment_school, subject_option, lvl, cand_lang, component, paper_code) from dual ) AS mark_status
      FROM
        (SELECT DISTINCT ccr.assessment_school,  --<< is the DISTINCT really needed?
          ccr.subject,
          ccr.subject_option,
    ...Also, try to find out the purpose of that above DISTINCT, is it really needed or is there some join missing?

  • Can't see incoming caller's name

    In my outgoing calls list I can see phone number and person's name (taken from contacts), but in incoming one there is only phone numbers
    Is there any option to turn on showing contact name?

    do your contacts use phone number only or also name and surname labels? you can had as many info to any number as you like - from nickname to email or even adress, within that contact editing menu...
    the other reason of incoming number not appearing may be that the caller wants to be anomymous and blocks his ID cell info and usualy appearing as "unknown" on your screen.
    My baby E61i was stolen from me !!!

  • New Website Offering 10 Very Slick FCE/FCP Plugins.

    Gogiangigo from the FCP forum has been developing Effects, Transitions and Generators for FCE/FCP.
    These are very slick plugins which should be useful to FCE editors.
    The site also has some very professional looking video demos/tutorials showing every plugin in use.
    You are welcome to download the plugins free of charge but Gogiangigo will not object if anyone donates a few pennies (or more!) as the site costs quite a bit to run and the plugins take time to produce.
    Donations would no doubt ensure that new plugins are developed and added.
    I am sure he would be interested in hearing suggestions for new filters but don't ask for an "Instant Auto-Edit Plugin"!
    http://www.videonline.co.uk/Luca_Plugins.htm

    An update to my original posting ............. Apparently gogiangigo had over 700 visits to his site yesterday and some 600 downloads.
    In view of the interest shown, he has opened a blog where folk can ask questions or discuss current, new and proposed plugins.
    http://lucasplugins.blogspot.com/
    I'm sure he would appreciate any input, be it help, comments or suggestions.

  • Why No Demo Version Of FCE/FCP ?

    Over the past year I have seen at least a couple of requests for a Demo version of FCE/FCP.
    It would seem sensible for Apple to give away 30-Day Fully Functioning Demos to prospective purchasers.
    A number of other makers do it - like Adobe with their Photoshop etc. demos - and as far as I can tell they seem pretty secure!
    Is there some technical reason for Apple not providing them?
    It would certainly solve the problem of those people who are not sure whether either they or their cameras could cope!
    Ian.

    Yes, I agree. They do the Demo with Aperture, so its not something new to them. Although I probably woldn't do it anymore becuase I already have FCE, it would be nice for prespective buyers. I guess they can head over to the local Apple Store to take it for a test run, but then you can't work on it with your own videos.

  • Table name where the text attachments stored

    Hi folks,
             I have created an text attachment while creatng PR. where do these attachments store. In which table can  i see the attachments that i have made while creating PR.Please suggest.
    Shyam.

    Hi Abhishek,
                   thanks for your anshwer. But, If it is just text we can read using READ_TEXT, but i need to check whehter is attachment is created for a specific PR or not. Any input on the table name, where the attachments are stored..
                        Thanks,
                        Shyam.

Maybe you are looking for