Calling function using grovey script

hi how can i write a grovey script to call a function,for below if statement
if :agr.contract_no is null
and :agr.agr_start_dt is not null then
:agr.contract_no := sms_fapp.get_contract_no(:fac.par_id_fac,:agr.agr_start_dt);
end if;
am in jdeveloper 11g release 2

i may understood you requirement.
why because am also forms background.
but peoples who gathered here may/may not know Oracle forms better be explict with your requirement in detail
if(Religionid!=null)
adf.object.applicationModule.FuncFindReligionDesc(x,Religionid)
}

Similar Messages

Calling function modules in Scripts???

Hello Gurus,
                      I am actually printing the value   &vbdpa-kwmeng& --- quantity in sales order in Scripts. The requirement is if the quantity is 1...it should be converted into words as ONE.i am new to Scripts...can anyone pls tell me how to do it..?
Thanks in Advance,
Anky

Hi,
In your script use a perform statement and define the form in SE38 program. Use command like in layout
/: PERFORM (V_NAME) IN PROGRAM (V_PROGNAME)
/: USING 'VAR1'.
/: USING 'VAR2'
/: CHANGING 'VAR3'
/: ENDPERFORM.
Goto SE38 transaction and create program V_PROGNAME.
Use the FM SPELL_AMOUNT. this FM is used to give the amount in words
FORM (V_nAME) USING ITCSY STRUCTURE.
*........data declaration
CALL FUNCTION 'SPELL_AMOUNT'
       EXPORTING
            AMOUNT    = PAMOUNT
           CURRENCY =
           FILLER    = SPACE
            LANGUAGE = 'E'
       IMPORTING
            IN_WORDS = T_SPELL
       EXCEPTIONS
            NOT_FOUND = 1
            TOO_LARGE = 2
            OTHERS    = 3.
ENDFORM.
ENDFORM.
Hope this helps.
Regards,
Richa

Call Function using DESTINATION

Hi there!
Abapers, I'm needing some help here with RFCs.
My destinations (SM59):
ERP_100
ERP_120
ERP_130
PI_200
PI_300
I have to call a function in PI from ERP. I'm doing in this way:
CALL FUNCTION 'pi_function_module' DESTINATION 'PI_200' ...
It's working. But the destination can not be hard coded. With the program in ERP_100 (DEV) and ERP_120 (QAS) the destination is PI_200 (PI DEV) and with the program in ERP_130 (PRD) the destination is PI_300 (PI PRD).
How can I handle this?
Thanks in advance!
Best regards,
Charles

Hi Charles,
Refer [this|Re: Deciding RFC destination dynamically; thread.
I quote the last post by Micky Oestreich - "This solely depends on the naming conventions you are using. Since the name of the RFC destination is arbitrary, there is 'no' way of determining the name of the destination."
So, your design approach could either be by building a customizing table where you maintain the destination values or use a 'CASE' statement in your code before calling the remote function module....something like:
DATA:
lv_own_system TYPE logsys,
lv_rfcdest     TYPE rfcdest.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
IMPORTING
    own_logical_system             = lv_own_system
EXCEPTIONS
    own_logical_system_not_defined = 1
    OTHERS                         = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CASE lv_own_system.
WHEN 'ERP_100' or 'ERP_120'.
     lv_rfcdest = 'PI_200'.
WHEN 'ERP_130'.
    lv_rfcdest = 'PI_300'.
WHEN OTHERS.
ENDCASE.
"Now call the remote function
CALL FUNCTION 'pi_function_module' DESTINATION lv_rfcdest ...
Hope this helps,
Cheers,
Sougata.

Calling function using setOnClick()

Hi All,
I am trying to open the link to the application in a new window without anymenubars,navigation bar,toll bar etc.I am using the following code.I am trying to call function onLinkAction() using setOnClick(),but getting an error cannot find onLinkAction().Please help me in this regard how to call the onLinkAction() method.

Hi,
How are you trying to call the function,could you please share your code.
You neeed not prefix the menthod with "on" while calling using setOnClick()..
Also make sure your function onLinkAction() has the mehtod signature as follows
onLinkAction(Event event)
Hope it helps..If not please elaborate your problem
Regards,
Santhosh

How to call pakage using Unix script

Hi,
I have created one package in Oracle(contains2 funcation and 4 procedure) which is in in xxx14database.
Now i can execute the package and its working fine at database level.
As per requirement ,i need to create on Unix script to trigger the package.
I have no idea how to create the Unix script to execute the package.
The Unix script need to created in xxxx001 Server.
Can anyone please let me know the template or any link which I can refer to create the same.
Or anyway i can create a script/batch on window and test first in my laptop and use the same script for my project work with required modification
Secondly the application owner asked me to give them both database and Unix script to them so that their database team will test the Package which i developed.
Database script meand the Package body and spec i should save as file.pkb format and send them or i can save them in .sql file and send them
Thanking you all in advance please help its urgent.

Now that you know how to do it ... reconsider whether doing so is a good idea.
There is almost nothing you can do calling from a shell script that can't be done more easily from DBMS_SCHEDULER other than compromise security. Shell scripts connecting to the database are, as shown in the demo code, inherently insecure and, if you get enough of them, make it difficult to cycle passwords on a regular basis.

Calling function using ADO

Hi.
I am trying to execute a function using ADODB.Command object. I am using ODBC driver Oracle73 Ver 2.5.
When I am executing the command object with CommandText Property set to "pk_test.GET"
It returns error saying:
[ORA-06550]
PLS-00221: 'GET' is not a procedure.
Statement Ignored.
Thank you

Is there actually a procedure 'get' inside a package 'pk_test'?
Justin

Issue with Bookmark functionality (using java script) in WAD.

Hi,
I am working on a WAD report and instead of using the default bookmark functionality within WAD, i use a java code to get the bookmark url in a new window.
But the problem is the java code is not working consistently at all times.
Issue1: If i click on the bookmark button on the report for the first time, it will open up a new window with the bookmark link. But if i close that new bookmark url window and again click on the bookmark button, a new window is opened which displays the template corresponding to the bookmarkk generated earlier (the report in its executed form), instaed of the bookmark url.
Can anyone help me to correct this issue. At any time i click the bookmark button i want to get the bookmark url opened in the new window, instead of the template.
Issue2: The bookmark is not at all working at particular times. It will show error message at the bottom the page. What I am thinking is, this is because of the misalignment of the java code when you sava the WAD report. The java code is so sensitive that it gets realigned each time you save the WAD report. But sometimes even without making any changes also it is not working.
If anyone has any suggestion or inputs for solving these issues pleese help ASAP. The java code i used is given below.
function createBookmark()
var bwUrl="<SAP_BW_URL CMD='BOOKMARK'>";
child1=window.open(bwUrl,'win1','width=1,height=1,alwaysLowered=0');
window.focus();
//Ensure that BW completed generation of the bookmark url.
now = new Date();
startTime = now.getTime();
delayTime = 3000;
//Set timeout to 3 seconds
waitTime = startTime;
//check if the bookmark url is ready and timeout after the specified time (delayTime).
while (waitTime<(startTime+delayTime))
now = new Date();
waitTime = now.getTime();
//BW identifies a bookmark using BOOKMARK_ID. The presence of this string
//in the url is used to identify creation of the bookmark. If bookmark
//is created on the server, proceed to the next step.
if (child1.location.href.indexOf("BOOKMARK_ID") >0)
break;
bookmark_url = escape(child1.location.href);
bookmark_url = bookmark_url.replace(/%3A/g, ":");
bookmark_url = bookmark_url.replace(/%3F/g, "?");
bookmark_url = bookmark_url.replace(/%26/g, "&");
bookmark_url = bookmark_url.replace(/%3D/g, "=");
var base_url = window.location+"";
var base_index = base_url.indexOf("?");
base_index = base_index + 1;
var book_link = base_url.substring(0,base_index);
if (book_link.indexOf("sapdbi")!=-1)
book_link = "http://dep.xxx.com/sso/index.jsp?target=BW&";
if (book_link.indexOf("sapqbia1")!=-1)
book_link = "http://qep.xxx.com/sso/index.jsp?target=BW&";
if (book_link.indexOf("sapqbia2")!=-1)
book_link = "http://qep.xxx.com/sso/index.jsp?target=BW&";
if (book_link.indexOf("sappbia1")!=-1)
book_link = "https://portal.xxx.com/sso/index.jsp?target=BW&";
if (book_link.indexOf("sappbia2")!=-1)
book_link = "https://portal.xxx.com/sso/index.jsp?target=BW&";
if (book_link.indexOf("sapqbi")!=-1)
book_link = "http://qep.xxx.com/sso/index.jsp?target=BW&";
if (book_link.indexOf("sappbi")!=-1)
book_link = "https://portal.xxx.com/sso/index.jsp?target=BW&";
var book_index = bookmark_url.indexOf("?");
book_index = book_index + 1;
var book_length = bookmark_url.length;
var temp_link= bookmark_url.substring(book_index,book_length);
portal_bwUrl = book_link+temp_link;
child1.close();
// The below two lines are not necessary, it is left for reference.
// https://portal.xxx.com/sso/index.jsp?target=BW&SAP- //LANGUAGE=EN&language=EN&cmd=LDOC&TEMPLATE_ID=IPUWT_FRAME
bookmark_window=window.open("",'_blank','width=1000px,height=30px,status=0');
bookmark_window.moveTo(50,500);
var body_tag = '<body leftmargin=3 topmargin=3 bgcolor=#cad4e3 class=&SAPBEXTbsBdyEdg&>';
var body_text ='
This bookmark can be copied and pasted to Internet Explorer-Favourites, mail or other documents:
';
bookmark_window.document.write('<title name="SAP_BW_TITLE_!IID_171">Bookmark</title>',body_text, body_tag, portal_bwUrl, '</body>');
Thanks in Advance.

Hi Danny
Thanks for the update
Hi Danny
Thanks for the update.
I can't find any code in the attachment.Its a Web Page.
Rightclick on webpage and View Source
Then i can find Code.
Still it is not working
Issues: Which object i have to replace with the URL in the code
Value = 'Weekly'
or
fun(WEEKLY REPORT)
and
when i paste that code in the XHTML tab of template and tried to save it,The scripted is changed
Please update how to proceed
Thanks

Calling function using user-defined type from query

I am in a bit over my head on this, at least at 2:30 in the morning after several hours of intense development. I am working on a function to return financial aging figures by aging date range. I created a user type Aging with a Currency type member for
each of these.
Public Type Aging
  Aging0 As Currency
  Aging30 As Currency
  Aging60 As Currency
  Aging90 As Currency
  Aging120 As Currency
End Type
I then created a function that accepts the account ID & the as-of date. I have all the rest of the code written to actually calculate all of it, but I am having a fundamental problem figuring out how to call the function. To eliminate any of the complex
mathematical elements for testing, I have reducted the function to a set of simple explicitly-set values below:
Public Function GetAging(AccountID As Integer, AsOfDate As Date) As Aging
    GetAging.Aging0 = 0
    GetAging.Aging30 = 0
    GetAging.Aging60 = 0
    GetAging.Aging90 = 0
    GetAging.Aging120 = 0
End Function
This all works fine from the immediate window, where I can type this:
?GetAging(115,#2015-04-05#).Aging0
and get the expected response of 0 (I have tested with other values for each member, so I know this part is working correctly).
But can I and/or how do I call this from a query? I should be able, as a test, to pass in each account # and the current date, just to get the Aging0 element out of my function--something like this:
SELECT
  AccountID,
  CustomerName,
  GetAging([AccountID],Date()).Aging0
FROM
  Customer
ORDER BY
  CustomerName
I get "The expression you entered has an invalid .(dot) or ! operator or invalid parentheses. But if I remove the ".Aging0", I get this error: Undefined function 'GetAging' in expression.
What am I missing here?

To expand on the answer of Hans, you could use a AgePoint parameter in the function like this:
Public Function GetAging(AccountID As Integer, AsOfDate As Date, AgePoint As Integer) As Currency
' do calculation
Select Case AgePoint
Case 0: GetAging = Aging.Aging0
Case 30: GetAging = Aging.Aging30
Case 60: GetAging = Aging.Aging60
Case 90: GetAging = Aging.Aging90
Case 120: GetAging = Aging.Aging120End Select
End Function
then use it in the query like this:
SELECT
AccountID,
CustomerName,
GetAging([AccountID],Date(), 0),
GetAging([AccountID],Date(), 30),
GetAging([AccountID],Date(), 60),
GetAging([AccountID],Date(), 90),
GetAging([AccountID],Date(), 120)
FROM
Customer
ORDER BY
CustomerName
However, this has the big drawback that the function will be called 5 times for each and every AccountID, so you will probably have bad performance.
Since you pass the AccountID to the function, you could consider to calculate the results for all AccountIDs in the code and store the results into a table, then join this table into the query.
Matthias Kläy, Kläy Computing AG

How to count how many times the caller calls by using UCCX script?

Hi there,
My customer wants to do a few changes for their script as below:
At the beginning of the script they are planning to add a new menu item, it will announce their new privacy policies and to continue the user must press the number one to continue to the Welcome. If they do not press 1 then the message should repeat itself and if they again do not press 1 they should be transferred over to a live operator who will explain things and then be able to transfer them back to the message so that they can press 1 and continue.
I modified their script as attached file, but i don't know how to count how many times the caller calls in "Get Reporting Statistic".
Any helps would be appreciated.
Thanks.

Hi Aaron,
At beginning, i want to use a variable to get number of mistake for the same caller, then we will send the call to right place to fulfill the customers' needs.
Do you have any suggestion for the new posted script?
Thanks.

Call Form using Shell Script

Hi,
Is it possible to call the 10g form through Shell Script.
If so,Can you tel me the Procedure how to cal the form.
Thanks,
Gany

Don't think so...
Still? Suppose that were possible, what would you expect to do? You mean to launch a form on the client workstation? A form normally opens in the Forms applet, that is launched from the web browser. So, to run a form, you need to access a web-page that launches that form.
Only rather old versions of forms (those previous to 6) do have a runtime that runs on the operating system and not through an applet that communicates with the application server.
I believe the call_form and open_form commands in forms should suffice for all that one needs (eventually open_form('x_form',activate,session) ).

Warning when calling function using page text

Hi *,
I have a function in package which generates some parameters for a link I want to put on bottom of the View Form.
The HTML I put in the bottom of View Form user text field looks like this:
Create default visit for this group
The problem is that Desinger throws a warning when I try to generate and the auto-install option gets ignored due to this error...
Can I set Designer to ignore this "parse error", so that the auto-install works again?
Here is the exact error message:
Message
CDG-03707: Module Component GROUPS.GROUPS: Invalid syntax in User Help Text or Page Text for Bottom of View Form: 'guides_package.visit_create...'
Thanks in advance,
Goeran Zaengerlein

Is there actually a procedure 'get' inside a package 'pk_test'?
Justin

How to call a function in "matlab script"

Hellow!
I am using Matlab scrip to make some matlab program in Labview,but i find when i try to call a matlab function like"myfun.m",it will ouput error message"undefined command myfun. So what should i do to call function in matlab script? thanks!

Happybird,
Do you have MATLAB installed on the computer? LabVIEW makes calls
to MATLAB to run the script node. If so, make sure that you have
launched MATLAB and then launch LabVIEW. Once you have tried
that, <a
href="http://digital.ni.com/public.nsf/websearch/4475BC3CEB062C9586256D750058F14B?OpenDocument">KB
300A6NDT</a> might be helpful. Hope this information helps!
Andy F.
National Instruments

Smart Call function

Hi,
I have some questions about Oracle CRM on D(Release15).
I'm trying to appear smart call function.
Now I could see that function on "Page Layout Management of Task(Appointment) page layout" .
And I set some settings to appear the smart call function.
So,I could see smart call function on create "Appointment" page.
There is a smart call weblink and that is crickable.
After my crick, there is a error messege,"Access denied.(SBL-DAT-00553)"
So, I checked settings of some access profiles and roles,
but I could not found the item to set the smart call function.
I'm sorry to my poor English. Please help me.
==
Question1,
Can smart call function use only on Life science Edition??
Question2,
Please tell me how to show and make smart call templates.
==
Thank you.
Yusuke

Hi,
You assumption is right that Smart Call option is available in Life Sciences Edition Only. But you can check with Support to see whether they can enable that for your OnDemand instance
Once you get it enabled, you can place the "Calls" applet under say "Account". Go and create a call and after save in the call detail page you would get an option to save the call as a template for future reference / defaulting of the information
Hope it helps
-- Venky CRMIT

Call ABAP function module from script?

Hi,
I have an ABAP function module, which works fine when I call it in a transformation.
Since I don't need to execute this function for each record but rather for each file I process, I would like to move the call from the DataFlow to a script in the WorkFlow. When I click on the 'functions' button the ABAP FM is available in my SAP Datastore, so I drag and drop it into my script. I also make sure to populate all required variables.
There are no error messages or warning when I check my job definition.
When I execute it, I get the following RFC error:
Function call <xxx ( abcd ) > failed, due to error <150413>: <RFC CallReceive exception <FUNCTION_NOT_FOUND>.>.
Is it just not possible to call an RFC enabled function module in SAP from a script or am I doing something wrong here?
Thanks,
Jan.

Could you please let me know how I can call an abap function module from a transformation? (from abap xslt program). I know how we can call methods of a class from the transformations, but no idea how we can call function modules. Any suggestions or a sample code snippet towards this will be very useful for me.
Thanks,
Shashi.

How to use CALL FUNCTION '/1BCDWB/SF00000014' in smartform urgent

hiiiiiiiii
Iam doing classical report n i want my output to be printed in smartform.
So my output is in IT_FINAL table.In smartform in Form Interface Table column i had declare :::
Parameter Name: IT_FINAL
Type Assignment:LIKE
Associated Type:ZSD_FINAL ( Its a structure of IT_FINAL)
And in SE38..iam using...............
data: FM_NAME1 type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_SDPRSR03_PR'
importing
FM_NAME = FM_NAME1.
CALL FUNCTION FM_NAME1
EXPORTING
IT_FINAL = IT_FINAL.
So while running its giving dump..
I DONT KNOW HOW TO USE THE ABOVE FUNCTION MODULE.
CALL FUNCTION '/1BCDWB/SF00000014'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please suggest me with example if possible......URGENT.
(Rewards if solved)
Regards.

Hi
see the below doc and do accordingly
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Regards
Anji

Calling function using grovey script

Similar Messages

Maybe you are looking for