Calling function using setOnClick()
Hi All,
I am trying to open the link to the application in a new window without anymenubars,navigation bar,toll bar etc.I am using the following code.I am trying to call function onLinkAction() using setOnClick(),but getting an error cannot find onLinkAction().Please help me in this regard how to call the onLinkAction() method.
Hi,
How are you trying to call the function,could you please share your code.
You neeed not prefix the menthod with "on" while calling using setOnClick()..
Also make sure your function onLinkAction() has the mehtod signature as follows
onLinkAction(Event event)
Hope it helps..If not please elaborate your problem
Regards,
Santhosh
Similar Messages
-
Call Function using DESTINATION
Hi there!
Abapers, I'm needing some help here with RFCs.
My destinations (SM59):
ERP_100
ERP_120
ERP_130
PI_200
PI_300
I have to call a function in PI from ERP. I'm doing in this way:
CALL FUNCTION 'pi_function_module' DESTINATION 'PI_200' ...
It's working. But the destination can not be hard coded. With the program in ERP_100 (DEV) and ERP_120 (QAS) the destination is PI_200 (PI DEV) and with the program in ERP_130 (PRD) the destination is PI_300 (PI PRD).
How can I handle this?
Thanks in advance!
Best regards,
CharlesHi Charles,
Refer [this|Re: Deciding RFC destination dynamically; thread.
I quote the last post by Micky Oestreich - "This solely depends on the naming conventions you are using. Since the name of the RFC destination is arbitrary, there is 'no' way of determining the name of the destination."
So, your design approach could either be by building a customizing table where you maintain the destination values or use a 'CASE' statement in your code before calling the remote function module....something like:
DATA:
lv_own_system TYPE logsys,
lv_rfcdest TYPE rfcdest.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
IMPORTING
own_logical_system = lv_own_system
EXCEPTIONS
own_logical_system_not_defined = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CASE lv_own_system.
WHEN 'ERP_100' or 'ERP_120'.
lv_rfcdest = 'PI_200'.
WHEN 'ERP_130'.
lv_rfcdest = 'PI_300'.
WHEN OTHERS.
ENDCASE.
"Now call the remote function
CALL FUNCTION 'pi_function_module' DESTINATION lv_rfcdest ...
Hope this helps,
Cheers,
Sougata. -
Hi.
I am trying to execute a function using ADODB.Command object. I am using ODBC driver Oracle73 Ver 2.5.
When I am executing the command object with CommandText Property set to "pk_test.GET"
It returns error saying:
[ORA-06550]
PLS-00221: 'GET' is not a procedure.
Statement Ignored.
Thank youIs there actually a procedure 'get' inside a package 'pk_test'?
Justin -
Calling function using user-defined type from query
I am in a bit over my head on this, at least at 2:30 in the morning after several hours of intense development. I am working on a function to return financial aging figures by aging date range. I created a user type Aging with a Currency type member for
each of these.
Public Type Aging
Aging0 As Currency
Aging30 As Currency
Aging60 As Currency
Aging90 As Currency
Aging120 As Currency
End Type
I then created a function that accepts the account ID & the as-of date. I have all the rest of the code written to actually calculate all of it, but I am having a fundamental problem figuring out how to call the function. To eliminate any of the complex
mathematical elements for testing, I have reducted the function to a set of simple explicitly-set values below:
Public Function GetAging(AccountID As Integer, AsOfDate As Date) As Aging
GetAging.Aging0 = 0
GetAging.Aging30 = 0
GetAging.Aging60 = 0
GetAging.Aging90 = 0
GetAging.Aging120 = 0
End Function
This all works fine from the immediate window, where I can type this:
?GetAging(115,#2015-04-05#).Aging0
and get the expected response of 0 (I have tested with other values for each member, so I know this part is working correctly).
But can I and/or how do I call this from a query? I should be able, as a test, to pass in each account # and the current date, just to get the Aging0 element out of my function--something like this:
SELECT
AccountID,
CustomerName,
GetAging([AccountID],Date()).Aging0
FROM
Customer
ORDER BY
CustomerName
I get "The expression you entered has an invalid .(dot) or ! operator or invalid parentheses. But if I remove the ".Aging0", I get this error: Undefined function 'GetAging' in expression.
What am I missing here?To expand on the answer of Hans, you could use a AgePoint parameter in the function like this:
Public Function GetAging(AccountID As Integer, AsOfDate As Date, AgePoint As Integer) As Currency
' do calculation
Select Case AgePoint
Case 0: GetAging = Aging.Aging0
Case 30: GetAging = Aging.Aging30
Case 60: GetAging = Aging.Aging60
Case 90: GetAging = Aging.Aging90
Case 120: GetAging = Aging.Aging120End Select
End Function
then use it in the query like this:
SELECT
AccountID,
CustomerName,
GetAging([AccountID],Date(), 0),
GetAging([AccountID],Date(), 30),
GetAging([AccountID],Date(), 60),
GetAging([AccountID],Date(), 90),
GetAging([AccountID],Date(), 120)
FROM
Customer
ORDER BY
CustomerName
However, this has the big drawback that the function will be called 5 times for each and every AccountID, so you will probably have bad performance.
Since you pass the AccountID to the function, you could consider to calculate the results for all AccountIDs in the code and store the results into a table, then join this table into the query.
Matthias Kläy, Kläy Computing AG -
Calling function using grovey script
hi how can i write a grovey script to call a function,for below if statement
if :agr.contract_no is null
and :agr.agr_start_dt is not null then
:agr.contract_no := sms_fapp.get_contract_no(:fac.par_id_fac,:agr.agr_start_dt);
end if;
am in jdeveloper 11g release 2i may understood you requirement.
why because am also forms background.
but peoples who gathered here may/may not know Oracle forms better be explict with your requirement in detail
if(Religionid!=null)
adf.object.applicationModule.FuncFindReligionDesc(x,Religionid)
} -
Warning when calling function using page text
Hi *,
I have a function in package which generates some parameters for a link I want to put on bottom of the View Form.
The HTML I put in the bottom of View Form user text field looks like this:
Create default visit for this group
The problem is that Desinger throws a warning when I try to generate and the auto-install option gets ignored due to this error...
Can I set Designer to ignore this "parse error", so that the auto-install works again?
Here is the exact error message:
Message
CDG-03707: Module Component GROUPS.GROUPS: Invalid syntax in User Help Text or Page Text for Bottom of View Form: 'guides_package.visit_create...'
Thanks in advance,
Goeran ZaengerleinIs there actually a procedure 'get' inside a package 'pk_test'?
Justin -
Hi,
I have some questions about Oracle CRM on D(Release15).
I'm trying to appear smart call function.
Now I could see that function on "Page Layout Management of Task(Appointment) page layout" .
And I set some settings to appear the smart call function.
So,I could see smart call function on create "Appointment" page.
There is a smart call weblink and that is crickable.
After my crick, there is a error messege,"Access denied.(SBL-DAT-00553)"
So, I checked settings of some access profiles and roles,
but I could not found the item to set the smart call function.
I'm sorry to my poor English. Please help me.
==
Question1,
Can smart call function use only on Life science Edition??
Question2,
Please tell me how to show and make smart call templates.
==
Thank you.
YusukeHi,
You assumption is right that Smart Call option is available in Life Sciences Edition Only. But you can check with Support to see whether they can enable that for your OnDemand instance
Once you get it enabled, you can place the "Calls" applet under say "Account". Go and create a call and after save in the call detail page you would get an option to save the call as a template for future reference / defaulting of the information
Hope it helps
-- Venky CRMIT -
SQL report region source to call a pl/sql function using DB link
Hi - I have a pl/sql function fn_dbtype(id NUMBER) defined in database X. The pl/sql function executes couple DML statements and returns a string (a SELECT query). I am able to call this function using SQL Plus (Connected to Database X) as below and it works fine:
declare
vSQL VARCHAR2(100);
begin
vSQL := fn_dbtype(1);
end;
The DML operations completed fine and vSQL contains the "Select" query now.
In APEX:
I am trying to create a SQL report in APEX using SQL query(PL/SQL function returning a sql statement) option. I am trying to figure out what to put in the region source so that the output of the "Select" query is displayed in the report.
Moreover APEX is hosted in a different database instance. So I would need to call this pl/sql function using a DB Link.
Please let me know what I need to put in the region source to execute the pl/sql function which returns the "Select" query thereby displaying the query output in the report. Thanks.
Edited by: user709584 on Mar 19, 2009 2:32 PM
Edited by: user709584 on Mar 19, 2009 2:34 PMtry something like this:
return fn_dbtype(1)@dblink; -
What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?
Hi experts,
I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions:
1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called at background task, what is the sequence of them? How many conditions will trigger the running of these FMs?
2 Where can I find the log of this pending FMs? In SAP library, it says there are 2 tables. But I checked these tables and can only find the FM name and user of it. And I can not understand content of these tables. It seems one is for the main information of FM, and the other is for the data of the FM, maybe the parameters.
3 If I call a FM in this way, Can I canncel it before the next commit work in some way?
Finally, thanks for reading and help.HI,
When the COMMIT WORK statement is executed, the function modules registered for the current SAP-LUW are started in the order in which they were registered. ROLLBACK WORK deletes all previous registrations for the current SAP-LUW.
If the specified destination is not available when COMMIT WORK is executed, an executable program called RSARFCSE is started in background processing. By default, this tries to start the function modules registered for a SAP-LUW in their destination every 15 minutes and up to 30 times. These parameters can be changed in the transaction SM59. If the destination does not become available within the defined time, it is recorded in the database table ARFCSDATA as the entry "CPICERR". The entry in the database table ARFCSSTATE is deleted after a standard period of eight days -
How to use CALL FUNCTION '/1BCDWB/SF00000014' in smartform
hiiiiiiiii
Iam doing classical report n i want my output to be printed in smartform.
So my output is in IT_FINAL table.In smartform in Form Interface Table column i had declare :::
Parameter Name: IT_FINAL
Type Assignment:LIKE
Associated Type:ZSD_FINAL ( Its a structure of IT_FINAL)
And in SE38..iam using...............
data: FM_NAME1 type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_SDPRSR03_PR'
importing
FM_NAME = FM_NAME1.
CALL FUNCTION FM_NAME1
EXPORTING
IT_FINAL = IT_FINAL.
So while running its giving dump..
I DONT KNOW HOW TO USE THE ABOVE FUNCTION MODULE.
CALL FUNCTION '/1BCDWB/SF00000014'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please suggest me with example if possible......URGENT.
(Rewards if solved)
Regards.Hi Hemant
Before running u r program agai run ur smartfor the it will release fm take that one and place ur program and change that name to FM_NAME1 and check once -
How to use CALL FUNCTION '/1BCDWB/SF00000014' in smartform urgent
hiiiiiiiii
Iam doing classical report n i want my output to be printed in smartform.
So my output is in IT_FINAL table.In smartform in Form Interface Table column i had declare :::
Parameter Name: IT_FINAL
Type Assignment:LIKE
Associated Type:ZSD_FINAL ( Its a structure of IT_FINAL)
And in SE38..iam using...............
data: FM_NAME1 type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_SDPRSR03_PR'
importing
FM_NAME = FM_NAME1.
CALL FUNCTION FM_NAME1
EXPORTING
IT_FINAL = IT_FINAL.
So while running its giving dump..
I DONT KNOW HOW TO USE THE ABOVE FUNCTION MODULE.
CALL FUNCTION '/1BCDWB/SF00000014'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please suggest me with example if possible......URGENT.
(Rewards if solved)
Regards.Hi
see the below doc and do accordingly
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
<b>call function 'SSF_FUNCTION_MODULE_NAME'</b>
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>call function FM_NAME</b>
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Regards
Anji -
How can I call functions in packages using flash builder?
a new guy in flash developnet, I need to find out a way to import multiple packages into frames and call functions. I know how to import packages, but an error occurs error 1120 : access of undefined property. How can ı solve them?
Is there any easy way to add Mediapomise object to the stage form the package? "addChild(loader);" does not work? or ı do not know whether it works or not, ı could not see the photo that ı took from camerauı object in android.
thank youI need to find out a way to import multiple packages into frames
Usually, no matter where you use any classes of any package, the imports happen always in the beginning.
If you have a specific problem with flashbuilder you should post in this forum:
http://forums.adobe.com/community/flash_builder -
Calling Functions of Loading DLL using java
I have a dll file
I know the functions which are ther in the dll
But how to call those functions using JAVA ?
can anyone tell me how to do the same...
Thanx in advance
regards,
RiteshI assume that you have a regular DLL and that the functions in that DLL are exported and that you know the signatures of each function.
With that in mind, you will need to use the Java Native Interface (JNI), to call those functions from Java. In a nutshell, you will need to create at least one class which declares some native methods, code a class static code block to load the JNI-DLL you are about to create, compile the class(es), run the javah tool supplied with the JDK which will emit a C compatible header file, implement the functions from the generated header file and compile that source file to into a DLL. It would be in this DLL that you would use the functions in the DLL that you ultimately want to access. So, what you wind up doing is creating a wrapper DLL.
Take a look at the JNI tutorial trail from Sun at http://java.sun.com/docs/books/tutorial/native1.1/index.html. -
How to access Call Back Functions using *.dll in the Labview?
Hai,
I am Pavan Ram Kumar Somu.
I am new to Labview, currently I am working on MVB Interface.
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
1. Pointer Arguments(To which memory it points in Labview)
2. function pointers Arguments
3 .pointers in structures and pointer structures in structures and many other data types.
Please Answer the below queries also:
1. How to pass pointer arguments to API functions in DLL and how to collect pointer
return types from API functions in DLL
2. How to pass structure arguments to API functions in DLL and how to collect structure
return types from API functions in DLL
3. How to use callback functions(nothing but function pointers) in Labview and how to
collect callback fuctions return types from API functions in DLL
I need your help while passing these datatypes to API functions in DLL from labview.
Suggest me if there is any other alternative for implementing this task.
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
II) #include <windows.h>
#include <process.h>
HANDLE rcvEvent0, rcvEvent1;
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
With regards
Pavan Ramu Samu"Somu" <[email protected]> wrote in message news:[email protected]...
Hai,
I am Pavan Ram Kumar Somu.
I am new to Labview, currently I am working on MVB Interface.
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
1. Pointer Arguments(To which memory it points in Labview)
2. function pointers Arguments
3 .pointers in structures and pointer structures in structures and many other data types.
Please Answer the below queries also:
1. How to pass pointer arguments to API functions in DLL and how to collect pointer
return types from API functions in DLL
2. How to pass structure arguments to API functions in DLL and how to collect structure
return types from API functions in DLL
3. How to use callback functions(nothing but function pointers) in Labview and how to
collect callback fuctions return types from API functions in DLL
I need your help while passing these datatypes to API functions in DLL from labview.
Suggest me if there is any other alternative for implementing this task.
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
II) #include <windows.h>
#include <process.h>
HANDLE rcvEvent0, rcvEvent1;
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
With regardsPavan Ramu Samu
Search the forum (forums.ni.com) for callback, pointer or handle, and you'll find that it is all possible, but not very easy.
e.g.: http://forums.ni.com/ni/board/message?board.id=170&message.id=88974&requireLogin=False
Regards,
Wiebe. -
How to use this function call function 'REUSE_ALV_COMMENTARY_WRITE' in alv
hi all
thanks in advance
how to use this function in alv programming
call function 'REUSE_ALV_COMMENTARY_WRITE'
why use and what purpose use this function plz tell me details
plz guide me
thanksHi
see this exmaple code where i had inserted a LOGO by useing this FM
*& Report ZTEST_ALV_LOGO
REPORT ztest_alv_logo.
TYPE-POOLS : slis.
*ALV Formatting tables /structures
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: gt_events TYPE slis_t_event.
DATA: gs_layout TYPE slis_layout_alv.
DATA: gt_page TYPE slis_t_listheader.
DATA: gs_page TYPE slis_listheader.
DATA: v_repid LIKE sy-repid.
*ALV Formatting work area
DATA: w_fieldcat TYPE slis_fieldcat_alv.
DATA: w_events TYPE slis_alv_event.
DATA: gt_bsid TYPE TABLE OF bsid WITH HEADER LINE.
INITIALIZATION.
PERFORM build_events.
PERFORM build_page_header.
START-OF-SELECTION.
*perform build_comment. "top_of_page - in initialization at present
SELECT * FROM bsid INTO TABLE gt_bsid UP TO 10 ROWS.
*perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
*USING = Row, Column, Field name, display length, table name, heading
*OR
PERFORM build_fieldcat.
gs_layout-zebra = 'X'.
*top of page event does not work without I_callback_program
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_structure_name = 'BSID'
i_background_id = 'ALV_BACKGROUND'
i_grid_title = 'This is the grid title'
I_GRID_SETTINGS =
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
TABLES
t_outtab = gt_bsid.
Form..............: populate_for_fm
Description.......: Populates fields for function module used in ALV
FORM populate_for_fm USING p_row
p_col
p_fieldname
p_len
p_table
p_desc.
w_fieldcat-row_pos = p_row. "Row Position
w_fieldcat-col_pos = p_col. "Column Position
w_fieldcat-fieldname = p_fieldname. "Field name
w_fieldcat-outputlen = p_len. "Column Lenth
w_fieldcat-tabname = p_table. "Table name
w_fieldcat-reptext_ddic = p_desc. "Field Description
w_fieldcat-input = '1'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " populate_for_fm
*& Form build_events
FORM build_events.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = gt_events.
READ TABLE gt_events
WITH KEY name = slis_ev_user_command
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_user_command TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
READ TABLE gt_events
WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_top_of_page TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
ENDFORM. " build_events
*& Form USER_COMMAND
When user command is called it uses 2 parameters. The itab
passed to the ALV is in whatever order it currently is on screen.
Therefore, you can read table itab index rs_selfield-tabindex to get
all data from the table. You can also check r_ucomm and code
accordingly.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
READ TABLE gt_bsid INDEX rs_selfield-tabindex.
error checking etc.
SET PARAMETER ID 'KUN' FIELD gt_bsid-kunnr.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDFORM. "user_command
*& Form top_of_page
Your own company logo can go here if it has been saved (OAOR)
If the logo is larger than the size of the headings in gt_page,
the window will not show full logo and will have a scroll bar. Thus,
it is a good idea to have a standard ALV header if you are going to
use logos in your top of page.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_page
i_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "top_of_page
*& Form build_fieldcat
*Many and varied fields are available here. Have a look at documentation
*for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
FORM build_fieldcat.
w_fieldcat-fieldname = 'BUDAT'.
w_fieldcat-seltext_m = 'Dte pst'.
w_fieldcat-ddictxt(1) = 'M'.
w_fieldcat-edit = 'x'.
Can change the position of fields if you do not want them in order
of the DDIC or itab
w_fieldcat-row_pos = '1'.
w_fieldcat-col_pos = '10'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " build_fieldcat
*& Form build_page_header
gt_page is used in top of page (ALV subroutine - NOT event)
*H = Header, S = Selection, A = Action
FORM build_page_header.
For Headers, Key is not printed and is irrelevant. Will not cause
a syntax error, but is not used.
gs_page-typ = 'H'.
gs_page-info = 'Header 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'H'.
gs_page-info = 'Header 2'.
APPEND gs_page TO gt_page.
For Selections, the Key is printed (bold). It can be anything up to 20
bytes. It gets printed in order of code here, not by key value.
gs_page-typ = 'S'.
gs_page-key = 'And the winner is:'.
gs_page-info = 'Selection 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'S'.
gs_page-key = 'Runner up:'.
gs_page-info = 'Selection 2'.
APPEND gs_page TO gt_page.
For Action, Key is also irrelevant.
gs_page-typ = 'A'.
gs_page-info = 'Action goes here'.
APPEND gs_page TO gt_page.
ENDFORM. " build_page_header
Maybe you are looking for
-
Can I add a text form field in Photoshop that can be edited in Acrobat reader?
I design coffee labels with Photoshop then send them off to the printers. The printers then open up a PDF and put in the best before date before printing. At the moment I have to add the text form fields using Acrobat Pro after i've saved the photosh
-
I need a create an interactive image at the ibook author app, but I don´t know how, I saw the interactve image in the "life on earth" book, from the apple store, in an temperature map apreciate that someone could help me, please
-
Windows sees my iPod but iTunes doesn't (USB 2.0)
I had this problem when I got my iPod a few days ago, then when I got iTunes to see my iPod it took AGES to upload songs, and when I reconnected my iPod, iTunes said it needed to reformat it. My PC at work speaks to my iPod just fine through it's USB
-
i can't resize the safari window by hovering over the bottom right corner of the window. I am working on a Macbook Pro and Yosemite. thanks!
-
Drag and drop features on adf faces
Hi all, I was toying around with the drag and drop compenents, like Duncan Mills describes it in his blog (http://groundside.com/blog/DuncanMills.php?p=574&more=1&c=1&tb=1&pb=1). Anyway, I tried to implement that feature between 2 tables. One attribu