Calling functions from a synchronize method

=can we call a synchronize method or a simple method from a sysnchronize method.
@lam

You can every second wednesday afternoon. Sometimes it works on morning as well, but it's not guarnteed (depends on position of Jupiter and Mars to Venus, except for easter). But take care of fridays, especially 13th (we all heard the story, when the whole internet went down..).
/bullshitmode=off
... yes, you can,... ;)
Edited by: slowfly on 27.03.2009 12:36

Similar Messages

How to Call Function from SAPSCRIPT

I want to Call a function from my SAPSCRIPT to get some data and print the same in the form , Can I get an example for this

Hi Nandan,
U cannot directly call function from SAPScript... For that u have to create one include in which u need to write the code. Using Perform... EndPerform u can call the same from SAPScript. See the below example
u need to write this code in SAPScript
PERFORM formname IN PROGRAM includename
USING &field1&
USING &field2&
CHANGING &field3&
ENDPERFORM
Here includename is your include type program.
u need to write this code in your include type program..
FORM formname TABLES in_par STRUCTURE itcsy
                        out_par STRUCTURE itcsy.
data : var1 like field1,
       var2 like field2,
       var3 like field3.
READ TABLE in_par WITH KEY 'field1'.
CHECK sy-subrc = 0.
var1 = in_par-value.
READ TABLE in_par WITH KEY 'field2'.
CHECK sy-subrc = 0.
var2 = in_par-value.
now u can call corresponding function using local VAR1 and VAR2. Here u can pass N no of USING parameters.
After processing on VAR3...
READ TABLE out_par WITH KEY 'field3'.
out_par-value = VAR3.
MODIFY out_par INDEX sy-tabix.
EndForm.
Here in_par and out_par are the structures which will be used to communicate with SAPScript. And this is the only way as per my view.
I m sure this code will work fine. Here i have used dummy variables that u need to change as per your requirement. If u have more queries write me back.
And yes if this works than dont forget to give the points.
Regards,
Sagar

Call function from data base with clob input parameter.

Hello,
In this project I use Jdev 11g.
I call function from database.
create or replace function get_fa_list (
p_fa_id_list in clob
return sys_refcursor
is
vCursor sys_refcursor;
begin
put_msg ('begin');
if p_fa_id_list is null then
put_msg ('CLOB is null!');
else
put_msg ('size CLOB: ' || dbms_lob.getlength (p_fa_id_list));
end if;
put_msg ('Save');
open vCursor for
select rownum as id, s.*
from (
select f.latitude, f.longitude, count (distinct f.res_id) as res_count, count (*) as fa_count, 16711680 as color, res_concat_distinct (f.res_id) as station_list
from mv_frequency_assignment f, table (SplitClob (p_fa_id_list, ',')) l
where f.ext_system = 'BI' and
f.ext_sys_id = l.column_value
group by f.latitude, f.longitude
) s;
put_msg ('Open and End');
return vCursor;
end get_fa_list;
I use TopLink in ejb.
i use follow code for call function and get result.
public List<TmpResPoints> findAllPointsBI(String p_id){
UnitOfWork uow = getSessionFactory().acquireUnitOfWork();
uow.beginEarlyTransaction();
StoredFunctionCall call = new StoredFunctionCall();
call.setProcedureName("get_fa_list");
call.useUnnamedCursorOutputAsResultSet();
ClobDomain c = new ClobDomain(p_id);
//System.out.println(c.toString());
call.addNamedArgumentValue("p_fa_id_list", c);
ReadAllQuery query = new ReadAllQuery();
query.setReferenceClass(TmpResPoints.class);
query.setCall(call);
List<TmpResPoints> result = (List<TmpResPoints>)uow.executeQuery(query);
uow.commit();
uow.release();
return result;
But size parameter "p_fa_id_list" is 0. (geting from temp table in Data base). this code in function >>
if p_fa_id_list is null then
put_msg ('CLOB is null!');
else
put_msg ('size CLOB: ' || dbms_lob.getlength (p_fa_id_list));
end if;)
How I can call this function from dataBase and get result?
thx,
Demka.

What is the SQL generated?
The argument should just be the Clob value (a String) not the domain object.
Also try addNamedArgument, and then pass the named argument to the query.
James : http://www.eclipselink.org

Send data to ECC table through RFC Call function from SAP B1 via b1if

Hi,
I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
Thanks

Solved by my own.

ADF: Can i call javascript function from java clsss method in ADF?

Hi,
I want to call javascript function in Java class method, is it possible in ADF? , if yes then how?
or I need to use Java 6 feature directely?
Regards,
Deepak

private void writeJavaScriptToClient(String script)
FacesContext fctx = FacesContext.getCurrentInstance();
ExtendedRenderKitService erks = Service.getRenderKitService(fctx, ExtendedRenderKitService.class);
erks.addScript(fctx, script);
}usage
StringBuilder script = new StringBuilder();
script.append( "var popup = AdfPage.PAGE.findComponentByAbsoluteId('p1');");
script.append("if(popup != null){"); script.append("popup.show();"); script.append("}");
writeJavaScriptToClient(script.toString());Timo

Call function from FM

hi, how do i call a function from the function module and use it accordinly? i need call the EDITOR_SYNTAX_CHECK from the FM and use it in my program to check abap syntax that users entered.
pls provide codes.
thanks. will reward if useful.

thanks for all of ur replies.
I have a text editor that allows users to enter abap codes and when they clicked on the save button, the program will check the syntax they have entered and prompt them accordinly. how can i call the EDITOR_SYNTAX_CHECK fm and used it for my program?
below is my codes:
REPORT ZEVONNE_DYN.
TABLES: ZPROGRAM_TABLE.
DATA: ITAB_PROGRAM TYPE TABLE OF ZPROGRAM_TABLE WITH HEADER LINE.
DATA: CODE_EDITOR_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
      CODE_EDITOR TYPE REF TO CL_GUI_TEXTEDIT.
DATA: WA_PROGRAM LIKE LINE OF ITAB_PROGRAM,
        g_ok_code LIKE sy-ucomm,         " return code from screen
        g_repid LIKE sy-repid.
DATA: st_head TYPE thead,
      i_tline TYPE STANDARD TABLE OF ZPROGRAM_TABLE,
      wa_tline TYPE ZPROGRAM_TABLE.
TYPES: BEGIN OF DYN_CODE,
        LINE(255),
      END OF DYN_CODE.
DATA: DYN_CODE_TABLE TYPE TABLE OF DYN_CODE,
      wa_lv LIKE LINE OF DYN_CODE_TABLE.
CONSTANTS: CODE_EDITOR_LENGTH TYPE I VALUE 255.
DATA: BEGIN OF CODE_EDITOR_LINE OCCURS 0,
        PROGRAM_CODE TYPE ZPROGRAM_TABLE-PROGRAM_CODE,
      END OF CODE_EDITOR_LINE.
TYPES: BEGIN OF CODE_EDITOR_TABLE_LINE,
         LINE(CODE_EDITOR_LENGTH) TYPE C,
       END OF CODE_EDITOR_TABLE_LINE.
DATA: CODE_EDITOR_TABLE TYPE TABLE OF CODE_EDITOR_TABLE_LINE,
      CODE_EDITOR_CONTENTS LIKE STANDARD TABLE OF LINE.
DATA: INSERT_COUNTER TYPE I, INSERT_VALUE(CODE_EDITOR_LENGTH) TYPE C,
GT_HEAD LIKE THEAD.
*ID
DATA l_number TYPE i.
DATA l_number2 TYPE i.
DATA: im_cpidentmax LIKE ZPROGRAM_TABLE-PROGRAM_ID.
*End ID
SELECT * INTO TABLE ITAB_PROGRAM FROM ZPROGRAM_TABLE.
START-OF-SELECTION.
CALL SCREEN 9000.
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'SCREEN_9000'.
SET TITLEBAR 'TITLE_9000'.
IF CODE_EDITOR IS INITIAL.
    CREATE OBJECT CODE_EDITOR_CONTAINER
       EXPORTING
         CONTAINER_NAME = 'GEN_CODE'
       EXCEPTIONS
         CNTL_ERROR = 1
         CNTL_SYSTEM_ERROR = 2
         CREATE_ERROR = 3
         LIFETIME_ERROR = 4
         LIFETIME_DYNPRO_DYNPRO_LINK = 5.
         CREATE OBJECT CODE_EDITOR
      EXPORTING
        PARENT = CODE_EDITOR_CONTAINER
        WORDWRAP_MODE =
        CL_GUI_TEXTEDIT=>WORDWRAP_OFF
          CL_GUI_TEXTEDIT=>WORDWRAP_AT_FIXED_POSITION
        CL_GUI_TEXTEDIT=>WORDWRAP_AT_WINDOWBORDER
        WORDWRAP_POSITION = CODE_EDITOR_LENGTH
        WORDWRAP_TO_LINEBREAK_MODE = CL_GUI_TEXTEDIT=>TRUE.
ENDIF.
ENDMODULE.                    "STATUS_9002 OUTPUT
MODULE USER_COMMAND_9002 INPUT
MODULE USER_COMMAND_9000 INPUT.
   CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
       MESSAGE S000(ZMSG02).
    WHEN 'LOAD'.
    send table to control
      CALL METHOD CODE_EDITOR->set_text_as_r3table
          EXPORTING
              table = DYN_CODE_TABLE
          EXCEPTIONS
              OTHERS = 1.
      IF sy-subrc NE 0.
        CALL FUNCTION 'POPUP_TO_INFORM'
             EXPORTING
                  titel = g_repid
                  txt2 = space
                  txt1 = text-004.
      ENDIF.
no flush here:
the automatic flush at the end of PBO does the job
ENDCASE.
ENDMODULE.                    "USER_COMMAND_9002 INPUT

Custom component calling function from main.mxml

I have a main.mxml that has the following function in it:
public function SubChooseField(evt:Event):void{
Alert.show( "Sub has been chosen" );
main.mxml also places the following custom component:
<?xml version="1.0" encoding="utf-8"?>
<mx:ComboBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="180" close="parent.SubChooseField(event)">
<mx:dataProvider>
<mx:Object data="1" label="choice 1 />
<mx:Object data="2" label="choice 2" />
<mx:Object data="3" label="choice 3" />
</mx:dataProvider>
</mx:ComboBox>
I want it so that when you chose one of the options in the
comboBox, it will call the function SubChooseField in the
main.mxml. But when I compile this, no matter what i try, i get the
error:
Error: Call to a possibly undefined method SubChooseField
through a reference with static type my_custom_opponent.
OR if i change the codeand remove the 'parent' to say:
close="SubChooseField(event)"> i get error:
Error: Call to a possibly undefined method SubChooseField.
any help much appreciated.

Rather than trying to use parent, using events might help
here. In your main mxml file, just listen for the change event that
is dispatched from your custom component. Since it is a ComboBox
component, it automatically dispatches this event. If your
component was more complex, you would need to dispatch a custom
event.
If your custom component was named CustomCombo, then the mxml
in your main file would look something like this:
<ns1:CustomCombo id="cb" x="70" y="39" width="160"
change="SubChooseField(event)"/>
Vygo

Calling function from list of values section?

can i call a function from list of values(LOV) section as well? I know we can sql query but udf is supported?

See this recent thread: Display as Text (LOV) or join
Scott

Calling function from PL/SQL block

Hi,
A very simple question.
A have a function called "test1" in my database. It is there i double chekked.
I would like to call this function from a block:
DECLARE
BEGIN
TEST1(1202);
END;
This gives me an error.
Why is this?

user610868 wrote:
Hi,
A very simple question.
A have a function called "test1" in my database. It is there i double chekked.
I would like to call this function from a block:
DECLARE
BEGIN
TEST1(1202);
END;
This gives me an error.
Why is this?Hello
A very very basic thing to do when you get an error is to include details of it. That helps narrow it down from one of the 1000s of potential Oracle errors it could be.
Anyway, a function returns a value, and in PL/SQL you need to capture that otherwise you'll get "an error". Modify your code like so
DECLARE
l_Test1Val VARCHAR2(4000); --CHANGE THIS TO BE THE SAME AS THE RETURN TYPE FOR YOUR FUNCTION
BEGIN
l_Test1Val := TEST1(1202);
END;HTH
David
Edited by: Bravid on Oct 25, 2011 3:57 PM
removed a ;

Calling Functions From Import Integration Script

I've got an import integration script that runs fine, however I also have several DataPump scripts that are used in FDM to change specific columns as they come in. I can take the code from the scripts and add to the Import Integration script, but I would rather just call those other functions from the VBScript. I don't see any docs on this, and I'm just wondering if anyone has done this or can describe how I can do it.
Is it possible? Since the standard import scripts reference the strField and the strRecord, can these functions be called from the import integration script?

strField and strRecord are arguments passed by the application to the import function. The represent the field as defined by the import format and the record that is being processed during the import.
Given that, I'm not sure how to answer your question.

Calling function from sql folder vs report

Hi,
A report based on a custom sql folder is taking a long time to run. One of the things that I noticed is that when I run the sql in plsql it takes a long time, but if I remove the row where I call a function, it runs pretty quickly.
In general, is there a difference between running a function from the sql custom folder and calling it from the report itself?
Thanks.
Leah

Hi Tamir,
I might check out the execution plans, but truthfully, understanding the plans and the meaning of the differences is not my strong point.
I thought that maybe there was some general rule that, for instance, it is better to keep functions out of the sql folder and use them in a condition in the report itself, or the opposite, or that maybe it makes no difference at all.
I appreciate the response.
Thanks.
Leah

What is the syntax for calling function from class file by jsp

does anyone here knows what is the syntax of how to call a function from java class file by javascript code or any way to call it?
and where should i put the calling function code? because the function is called depend on the user click.
for example
<%=pc.functionName(a,b)%>
for the variable a and b, how can i get the value from html textbox and put it in a and b...
urgent needed...
thx

Jsp's are executed before the Html forms are created and loaded. Dont try to use a java code function calling on a javascript click. You'll have to explicitly redirect it into a servlet where in you can call the function you want.
Well! another way could be using AJAX. That seems to be powerfull enough and it might also serve your purpose.
Hope this helps

Put SQL query in a function/ call function from region

How can I write a SQL query (like SELECT EMPNO, ENAME, JOB FROM EMP) as PL/SQL function, and then call this function from the PL/SQL Function Returning SQL Statement region?
Thanks, Tom

thanks jverd for your quick reply.
I know passing in a reference to an object will do the job if I want to change the value several parameters in one function call.
But I want to ask, is there any other ways?
the following code works.....
public class TestParameter {
     public static void main(String[] args) {
          Test2 t2 = new Test2();
          invokeChange(t2);
          System.out.println("x = " + t2.x + "\t y = " + t2.y);
     static void invokeChange(Test2 t2) {
          t2.x = 10;
          t2.y = 15;
class Test2 {
     int x;
     int y;
}

Getting session hang When calling Function from SQL query

Hi All,
I am using Oracle 8.1.7.4.0. I have a fucntion in a Package and I am calling it from the SQL query. When I am firing the query my oracle session is going to hang position and I am not able to any thing. I have to kill the session.
But this same thing is working fine in Oracle 9.i.
There are no out parameter and no DML, DDL and DCL statement in this fucntion.
Could you please get back me what is the problem on it.
Regards
SUN

Check why your session hangs.
Just a few ideas:
* Blocking locks?
* Endless loop?
* Performance (maybe it is just slow in orac8i and you have to wait a bit longer). Check the execution plans of the SQL statements in your function.
* Don't use a function, but direct SQL, it is faster in both versions.

Calling function from Backing Bean or JSP page

We are on Jdeveloper 10.1.3.3.0, ADF Faces, JSF Faces .., Currently there is a function call from Javascript event (onmouseover) in the JSP page. I want to call this function from a backing bean or JSP page, as I have to pass some values to this function.
For Ex., I have a function call like return submit('A','B','Test'); on the Javascript event (onmouseover) in jsp page. I want to remove this function from the javascript event and call from backing bean or jsp page to pass some values into the submit() function. I appreciate if anyone can give some example of how to call this function from backing bean or jsp page in the <SCRIPT> or <SCRIPTLET>
Thanks,
Ram

A use case would be helpful so that we can get a better idea of what you want to do.
As a general rule, there is no way to call a client side Javascript function from a backing bean, which is server side. However, there are ways to inject information from a backing bean into your Javascript call. For instance, I have an application that uses Google Maps API. It has an onload call to a Javascript function that builds the map and designates it's center point. The center point comes from a backing bean as latitude and longitude properties. So here is my body tag:
<afh:body onload="initialize(#{backing_searchResults.latitude},#{backing_searchResults.longitude},#{searchCriteria.distance})"
onunload="GUnload()">onload calls the Javascript function called initialize, and passes the latitude, longitude, and distance from the bean. Is the function really being called from my backing bean? No - the parameters are hard coded into the onload event code when the page is rendered. Does it do the job? Sure it does.

Calling functions from a synchronize method

Similar Messages

Maybe you are looking for