Calling in to teleconferences with Conf ID and PIN

Has anyone any advice or solutions on this one.
I often need (or wopuld liker) to use the skype call out facility to dial into an AT&T or similar teleconference. The reason is that usually my PC speakers and microphone give a better result than a landline/speakerphone. (It's also much cheaper if the dial in number is international).
Occasionally it works but more ofthen the Dial Pad tones generate multiple counts...eg if i need tio dial the PIN 1234, by pressing the dial pad digits the service receives [removed for privacy] or similar. It's a real and very annoying problem when trying to join a call urgently.
There are several earlier threads dating back years on this issue. Has anyone solved it? It's hard to believe that SKYPE developers have left such a thing unaddressed. Is there a commercial reason they want to prevent us doing this?
Any help? Mr Skype....any ideas?
Thanks,
RD

Hello JRICHJ
Check out the articles below for troubleshooting issues with messages.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

Calling Oracle Stored proc with record type and table Type

I have a oracle SP which takes record type and table Type which are used for order management.
Is there anay way to populate parameters with these datatypes and call the stored procedure using ODP.NET?
Please help.
Thanks in advance

Hi,
ODP supports associative arrays and REF Cursors. There is no support for PLSQL table of records.
Jenny

Calling a REST webservice with pl/sql and parse XML

Hi
I hope someone is able to help me with this task. I'm newbie with Oracle APEX, have not developed advanced applications yet. A few days ago I installed one of the package application with customer and order. I want to integrate with online shopping with Rest service using PL / SQL. NETS is a provider of online payment systems.
http://www.betalingsterminal.no/Netthandel-forside/Teknisk-veiledning/Communication/REST/
There are four steps you must go through to execute the payment. where it is retunert xml files containing infomation to be used further.
Step 1 - Register payment
Webshop Performs Register:
https://epayment-test.bbs.no/Netaxept/Register.aspx?MerchantId=9999997&token=secret&orderNumber=10011&amount=200&CurrencyCode=NOK
&redirectUrl=http://webshop/RegisterReply.asp
Reply from payment provider:
<? Xml version = "1.0"?>
<RegisterResponse Xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<TransactionId> B127f98b77f741fca6bb49981ee6e846 </ TransactionId>
</ Register Response>
Step 2 - Present Web form to customer
Webshop's customer submit web form:
https://epayment-test.bbs.no/Terminal/default.aspx?merchantId=9999997&transactionId=b127f98b77f741fca6bb49981ee6e846
Step 3 - "Redirect" customer back to merchant
Payment provider send URL to redirect webshop's customer:
http://webshop/RegisterReply.asp?transactionId=b127f98b77f741fca6bb49981ee6e846&responseCode=OK
Step 4 - Process payment
Webshop Performs Process (AUTH):
https://epayment-test.bbs.no/Netaxept/Process.aspx?merchantId=9999997&token=&transactionId=b127f98b77f741fca6bb49981ee6e846&operation=AUTH
Reply from payment provider:
<? Xml version = "1.0"?>
<Process Response xmlns: XSi = "http://www.w3.org/2001/XMLSchema-instance" xmlns: xsd = "http://www.w3.org/2001/XMLSchema">
<Operation> AUTH </ Operation>
<ResponseCode> OK </ Response Code>
<AuthorizationId> 064392 </ AuthorizationId>
<TransactionId> B127f98b77f741fca6bb49981ee6e846 </ TransactionId>
<ExecutionTime> 2009-12-16T11: 17:54.633125 +01:00 </ ExecutionTime>
<MerchantId> 9999997 </ MerchantId>
</ Process Response>
Webshop Performs Process (CAPTURE)
https://epayment-test.bbs.no/Netaxept/Process.aspx?merchantId=9999997&token=&transactionId=b127f98b77f741fca6bb49981ee6e846
&transactionAmount=200&operation=CAPTURE
Reply from payment provider:
<? Xml version = "1.0"?>
<ProcessResponse Xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation> CAPTURE </ Operation>
<ResponseCode> OK </ Response Code>
<TransactionId> B127f98b77f741fca6bb49981ee6e846 </ TransactionId>
<ExecutionTime> 2009-12-16T11: 40:57.601875 +01:00 </ ExecutionTime>
<MerchantId> 9999997 </ MerchantId>
</ Process Response>
I really appreciate if anyone can help me with This

Hi,
Is there any particular reason you want to call a form through provider API?
Because when you call a from through
wwa_api_provider.show_portlet the issue #1 is true (you cannot pass parameteres to a form) and the issue #2 could be resoled by supplying a porltet_record.p_page_url to the current page URL.
However, there is a form-specific PLSQL APIs to call a form and pass parameters to that from which is describe in our FAQ list:
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#BuildingApplications
Please see following topics:
"How do I call a form in insert mode and pass it default values?"
and
"How do I call a form and pass it a query condition to be automatically executed?"
Thanks,
Dmitry

Jinitiator 1.3 (calling webservice on https with apache axis and jre 1.3)

I would like to run a PJC component which integrate Axis for communication with webservices located on remote server over https protocol..
I have made a backend classes with wsdl2java (axis or with SOAPUI)..
If i run a program with JDK > 1.3 all works fine... but if I run the program with JRE 1.3 (Jinitiator 1.3 PJC) I get the error:
--> javax.xml.rpc.ServiceException: java.net.MalformedURLException: unknown protocol: https
javax.xml.rpc.ServiceException: java.net.MalformedURLException: unknown protocol: https
     at arhivskiSistem.InDocArchiveWebServiceLocator.getInDocArchiveWebServiceSoap(InDocArchiveWebServiceLocator.java:100)
     at in2.mikrocop.Test.dokumenti(Test.java:93)
     at in2.mikrocop.Test.testiranje(Test.java:73)
     at in2.mikrocop.Test.main(Test.java:87)my source code is like this:
        System.setProperty("java.net.debug", "all");
        System.setProperty("javax.net.ssl.keyStore", direktorij + keyStore);
        System.setProperty("javax.net.ssl.keyStorePassword", this.getPassword());
        System.setProperty("javax.net.ssl.keyStoreType", "pkcs12");
        System.setProperty("javax.net.ssl.trustStore", direktorij + trustStore);
        System.setProperty("javax.net.ssl.trustStorePassword", this.getPassword());
        System.setProperty("javax.net.ssl.trustStoreType", "jks");
        InDocArchiveWebServiceLocator ws_locator = new InDocArchiveWebServiceLocator();
        InDocArchiveWebServiceSoap_PortType pt = ws_locator.getInDocArchiveWebServiceSoap();Do you have any Idea how to solve this?

First, I will start by saying that JInitiator was not intended to run on Win7, especially 64bit. So, it may be time to think about moving to the Java Plugin. Preferably one which is certified with your Forms version.
To your issue, I suspect you need to change the "Region and Language" settings on the client machine. This can be found on the Control Panel. If that doesn't help, take a look at this:
http://stackoverflow.com/questions/4850557/convert-string-from-codepage-1252-to-1250

CUCM 10.x Meet Me with Name announcement and Pin number

Hey,
I have been looking for a right way of doing this on CUCM to have a name announcement and also pin number to enter the meeting room.
Hope someone can help me out with this.
Regards,
Shibly Ibrahim

CUCM doesn't provide that, you would need to involve CUC/CUE/UCCX to do that, this has been asked plenty of times on CSC before, a simple search will provide you with the possible options you have.

Problems with ISO 6 , and not being able to make recieve calls,

I dont know if anyone else has this problem, I have a IPHONE 4 , and since upgrading i cant make or recieve calls, I have checked with my carrier and they have veryfied that the problem is with my Iphone,
Any tips on sorting this out, I tried to restore to ISO 5 but keep getting up a error message. I called Apple support and guy on phone reckons he didnt know about any ISO 6 problems!

that's weird.. maybe something wrong with your updates, have you tried to donwload the updates again?? how about the sms??

Getting error while Calling Oracle Stored Procedure with output Parameter

HI All,
From long days i am working on this but i unable to solve it.
Even i have studied so many forums in SAP but i didn't find the solution.
I am calling Oracle Store procedure with 3 inputs and 1 output without cursor.
Store Procedure:-
CREATE OR REPLACE PROCEDURE PDS.send_rm
IS
proc_name           VARCHAR2(64) := 'send_rm';
destination_system VARCHAR2(32) := 'RAWMAT';
xml_message         VARCHAR2(4000);
status_code         INTEGER;
status_message      VARCHAR2(128);
debug_message       VARCHAR2(128);
p_ret               INTEGER;
BEGIN
DBMS_OUTPUT.PUT_LINE( proc_name || ' started' );
xml_message := '<RAW_MATERIAL>'||
                 '<BAR_CODE>10000764601</BAR_CODE>'||
                 '<MATERIAL>1101448</MATERIAL>'||
                 '<VENDOR_CODE/>'||
                 '<PRODUCTION_DATE>0000-00-00</PRODUCTION_DATE>'||
                 '<EXPIRE_DATE>0000-00-00</EXPIRE_DATE>'||
                 '<BATCH/>'||
                 '<PO_NUM/>'||
                 '<MATERIAL_DESCRIPTION>POWER SUPPLY</MATERIAL_DESCRIPTION>'||
                 '<SPEC_NAME/>'||
                 '<STOCK_CODE>BSW-JH</STOCK_CODE>'||
                 '<INSPECTION_LOT>00</INSPECTION_LOT>'||
                 '<USAGE_DECISION_CODE/>'||
                 '<MATERIAL_GROUP>031</MATERIAL_GROUP>'||
                 '</RAW_MATERIAL>';
      dbms_output.put_line('XML '||xml_message);
--      vp_interface.load_rawmat@cnprpt1_pds(SYSDATE, destination_system,
--                   xml_message, p_ret);
      vp_interface.load_rawmat(SYSDATE, destination_system,
                   xml_message, p_ret);
      dbms_output.put_line('Return Code '||p_ret);
      COMMIT;
EXCEPTION
WHEN OTHERS THEN
    status_code := SQLCODE;
    status_message := SUBSTR(SQLERRM, 1, 64);
--    Extract_Error_Logger(proc_name, 'LOCAL', SYSDATE, -999,
--                         status_message, 0, debug_message);
    ROLLBACK;
END send_rm;
And while i am calling this Store procedure in MII, I am facing error.
I have tried different ways but didnt solved
In SQL Query, i kept mode as: FixedQueryOutput
Can anyone tell me or send code for calling above store procedure
And onemore thing, While creating store procedure in Oracle for MII. Do we need to Create output parameter as cursor or normal.
Thanks,
Kind Regards,
Praveen Reddy M

Hi Praveen
Our wrapper was created because we could not modify the procedure we call (it was not returning a cursor).
CREATE OR REPLACE PROCEDURE CHECK_PUT_IN_USE
(STRCMPNAME in varchar2,
STRSCANLABEL in varchar2,
RCT1 out SYS_REFCURSOR
AS
charDispo          Char(1);
charStatus          Char(1);
intCatNo          Integer;
charCatDispo     Char(1);
strCatQual          VarChar2(2);
strCatDesc          VarChar2(30);
strMsg          VarChar2(128);
BEGIN
qa.check_put_in_use@AR(STRCMPNAME,
                                          STRSCANLABEL,
                                          charDispo,
                                          charStatus,
                                          intCatNo,
                                          charCatDispo,
                                          strCatQual,
                                          strCatDesc,
                                          strMsg);
OPEN RCT1
FOR Select charDispo,charStatus,charDispo,charStatus,intCatNo,charCatDispo,strCatQual,strCatDesc,strMsg from Dual;
END;
Hope this helps
Regards
Amrik
then with a FixedQueryWithOutput
call mixar.qasap.wrapper_update_put_in_use('[Param.1]','[Param.2]',[Param.3],?)
Hope this helps.

Not getting calls on iPhone 6+ with IOS 8.3

I purchased a Skype phone number so that I could redirect my local phone number to it and therefore receive my phone calls on Skype while travelling overseas.
It works if I have Skype open on my iPhone 6+ when the call comes in, but if Skype is closed then I get nothing. I have "Background App Refresh" turned on for Skype in my General settings and my Skype app is up to date.
This is pretty useless! Does anyone have a solution?
Alternatively, is there another app like Skype that can receive redirected calls?

I just tried something and it did work on my iPhone6 but on my iPhone 5c it works only sometimes. I opened Skype and if there was a missed call or anything I clicked on it and then closed Skype. Then I went to iPhone settings and turned off notifications for Skype, closed it, opened it again and turned notifications on again. Also I turned on Alerts when locked, not banners. Then I closed it and opened Skype, locked my phone and tried to call my Skype number with another phone and it worked. Hope it will work for you as well!

New Barlclaycard rewards going to be chip and pin?

So now that we know that the rewards card is going to be available with a chip I sent them a message to see when I can get it. This is part of their response: ----------------------------------------------------------------------------------------------------------------------------------------------------Thank you for contacting us regarding your Barclaycard Rewards MasterCard. We can certainly address your concern regarding the new card on your account.
We are pleased to inform that your account is now eligible for the chip-enabled card and will be requested as soon as it becomes available for distribution. Note that this card has a new expiration date with same account number. Be reminded that you should provide the new expiration date to any merchant set up with recurring payments. Once mailed, please allow 7 to 10 business days to be received.
Upon receipt of the card, you may activate it by logging into your account online, contacting us by phone to speak with a representative, or using our automated phone system. Please be advised that activating your card online, you'll be prompted to create a PIN and thus won't need for you to know the assigned PIN to customize it. Activation of your PIN won't take effect until you use your card at a chip-card terminal with a cashier. Your first transaction with a chip-card terminal will activate the new PIN and you'll then be able to use the chip-and-PIN feature at self-service terminals. ---------------------------------------------------------------------------------------------------------------------------------------------------- Does that sound like it's going to be chip and pin instead of chip and signature?

seezar wrote:
So now that we know that the rewards card is going to be available with a chip I sent them a message to see when I can get it. This is part of their response: ----------------------------------------------------------------------------------------------------------------------------------------------------Thank you for contacting us regarding your Barclaycard Rewards MasterCard. We can certainly address your concern regarding the new card on your account.
We are pleased to inform that your account is now eligible for the chip-enabled card and will be requested as soon as it becomes available for distribution. Note that this card has a new expiration date with same account number. Be reminded that you should provide the new expiration date to any merchant set up with recurring payments. Once mailed, please allow 7 to 10 business days to be received.
Upon receipt of the card, you may activate it by logging into your account online, contacting us by phone to speak with a representative, or using our automated phone system. Please be advised that activating your card online, you'll be prompted to create a PIN and thus won't need for you to know the assigned PIN to customize it. Activation of your PIN won't take effect until you use your card at a chip-card terminal with a cashier. Your first transaction with a chip-card terminal will activate the new PIN and you'll then be able to use the chip-and-PIN feature at self-service terminals. ---------------------------------------------------------------------------------------------------------------------------------------------------- Does that sound like it's going to be chip and pin instead of chip and signature? No.That is a pin from every other card. Chip and pin is completely different. The only ones doing it is Dinersclub. I think penfed. and a couple others. All cards have a pin. But it does not make it chip and pin. Its chip and Signature. Then back up will be pin. this is not the same. when you need a pin for every transaction like in europe.Edit so here in US> Even Diners in most cases will use signature. because no many retailers have Pin Terminal. They are still using magnetic strip on the back. But with true chip and pin. you put card in chip reader. and user must use pin. Most cards will default as secondary to chip and pin if no magnetic strip reader available. But as i said. This would still be Chip and Signature. Also Chip and Pin. you don't choose your own pin. The only way is to go to Atm and force it to change the assigned pin.

BBM and PIN not working for one contact!

For one BBM contact I cannot send BBMs or PIN anymore. It is driving me crazy.
When I send a PIN i get the message "service blocked" and a red cross. BBMs will send, I get the tick but no D or R. This is only happening with one contact. He is having problems only with me as well. We can send each other text messages etc. We are both in the UK and with o2. Previously i've had no problems with BBM.
Does anyone know what's wrong?
It's so frustratng because this contact is the reason I bought a blackberry and he bought one, so we could use bbm as he works in an area with bad reception.

Hello katie_d,
Welcome to the BlackBerry Support Community.
The following article should help regarding the issue you are experiencing with sending BBM™ and PIN messages:
A BlackBerry smartphone is unable to send and receive PIN messages and the error "Service Blocked" is shown - http://www.blackberry.com/btsc/KB19244
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
Have you considered posting your question in their forums?
Here is some information re. the jar file:
http://ostermiller.org/opening_jar_files.html

I got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i c

i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

I am at Ramstein AB Germany. My iphone screen was smashed badly on the flight to Germany this morning. WHEN I access apple support for this subject it gives me 3 options call now, call me now or call me later. As I am in Germany with no coverage and no

I am at Ramstein AB Germany. My iphone screen was smashed badly on the flight to Germany this morning. WHEN I access apple support for this subject it gives me 3 options call now, call me now or call me later. As I am in Germany with no coverage and no working phone none of those options will work. Can you get this e-mail to someone who can help. My iphone serial # is C38xxxxxx. 1) I need to know where and how I can get a replacement somewhere nearby in Germany 2) If 1 is not an option I need to set up an appt to get a to get a new iphone at an apple store in Atlanta GA in the evening of 11 July.
Thank you very much, Phil Edelen
<Edited By Host>

Thanks, my wife is the one serving I am retired and trying to follow her as much as I can.
I will schedule an appt for my next time stateside. I have spent too much time on many Apple web sites trying to get an e-mail to communicate with anyone at Apple to no avail, only phone numbers. I guess if you are overseas with no international access you are out of luck communicating with them. I did find one e-mail address but the reply was computer generated and provided useless links.
If anyone has any e-mail address for anyone at Apple I would appreciate it.
Thanks again,
Phil

I have 1 apple id, 2 5S iPhones with separates numbers and both ring when I get a call on one of the numbers. How do I switch that of ?

I have 1 Apple ID, 2 5S iPhones (1 private/1 work) with separates numbers and both phones ring when I get a call on one of the numbers. How do I switch that of ?

I realize that my wife could make her own iTunes account; however, she's been using mine for about 2 years now and this hasn't been an issue. I guess with the Family Sharing she can have access to all of our music and apps now with her own account.
I'll have to see if unchecking our emails resolves this issue.

Calling in to teleconferences with Conf ID and PIN

Similar Messages

Maybe you are looking for