Calling java class from abap function moduile

Is it possible to call java class from function module.
i am a java guy. my need is to call a java class from a function module in the backend. which in turn performs certain functions.
i would be highly obliged if someone could let me know if this is possible.
regards
Srikumar V

Hi Srikumar ,
you can call a java webservice in ABAP .
u can call the webservice and via that u can trigger the java class..
Regards
Renu

Similar Messages

Error while calling java program from ABAP

Hi Experts,
We are trying for RFC inbound scenario.
We followed the below blog
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
We are working with SAP JCO 3.0.2
We are getting the error : 'STFC_CONNECTION' could not be found in the server repository.
After I run the Java server program if I execute the RFC destination directly from SM 59 it is showing successful messages.
If I stop the java program then this RFC is failing. Based on this we concluded that RFC to Java connection is working fine.
But as mentioned in blog if we call the RFC Destination from ABAP program it is giving the below error,
'STFC_CONNECTION' could not be found in the server repository.
If we test the RFC destination using RFC_TRUSTED_CHECK standard FM we are getting the below error.
'RFCPING' could not be found in the server repository.
We create the RFC destination of Type : TCP/IP as exactly mention in the blog.
Please help us in resolving this issue.
Thanks
Prince

Pabi,
Using the RFC connection,we can establish a link between Java and SAP.
Afterwards,hope we can call Java program from ABAP.
Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
DATA: REQUTEXT LIKE SY-LISEL,
      RESPTEXT LIKE SY-LISEL,
      ECHOTEXT LIKE SY-LISEL.
DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
DATA: RFC_MESS(128).
REQUTEXT = 'HELLO WORLD'.
RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
CALL FUNCTION 'STFC_CONNECTION'
   DESTINATION RFCDEST
   EXPORTING
     REQUTEXT = REQUTEXT
   IMPORTING
     RESPTEXT = RESPTEXT
     ECHOTEXT = ECHOTEXT
   EXCEPTIONS
     SYSTEM_FAILURE        = 1 MESSAGE RFC_MESS
     COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
IF SY-SUBRC NE 0.
    WRITE: / 'Call STFC_CONNECTION         SY-SUBRC = ', SY-SUBRC.
    WRITE: / RFC_MESS.
ENDIF.
Regards,
Sree

Calling Java program from ABAP

Hi All,
my ABAP program downloads one file to one folder. Then one Java program is running to Encrypt the file.
Now , they want to call the JAVA program in ABAP, so that they can encrypt the file before downloading.
Is it possible to call a Java program from ABAP ? If Yes, please give me the detailed procedure.
Thanks
pabi

Pabi,
Using the RFC connection,we can establish a link between Java and SAP.
Afterwards,hope we can call Java program from ABAP.
Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
DATA: REQUTEXT LIKE SY-LISEL,
      RESPTEXT LIKE SY-LISEL,
      ECHOTEXT LIKE SY-LISEL.
DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
DATA: RFC_MESS(128).
REQUTEXT = 'HELLO WORLD'.
RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
CALL FUNCTION 'STFC_CONNECTION'
   DESTINATION RFCDEST
   EXPORTING
     REQUTEXT = REQUTEXT
   IMPORTING
     RESPTEXT = RESPTEXT
     ECHOTEXT = ECHOTEXT
   EXCEPTIONS
     SYSTEM_FAILURE        = 1 MESSAGE RFC_MESS
     COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
IF SY-SUBRC NE 0.
    WRITE: / 'Call STFC_CONNECTION         SY-SUBRC = ', SY-SUBRC.
    WRITE: / RFC_MESS.
ENDIF.
Regards,
Sree

How to call java program from ABAP

Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.

This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm

Calling Java API from ABAP using JCo (Part 2)

Hello,
This is an additional question to thread Calling Java API from ABAP using JCo
Has anyone managed to get the input parameter value
input.getString("REQUTEXT")
that is being passed from ABAP?
If yes, what kind of setting you need to do? Because when I execute, it has no value.
Thus, the below ECHOTEXT parameter returns blank value:
output.setValue(input.getString("REQUTEXT"),"ECHOTEXT");
When I debug by printing the below line, the input XML is indeed without value:
System.out.println(input.toXML());
Anybody knows how to pass input variable from ABAP to JAVA using JCo?
rgs,
hiroshi

Hallo Hiroshi,
as far as I can see, you are doing it the right way. The problem might be that the ABAP program does not fill in this parameter because something went wrong in the SAP System.
Have you tried setting a breakpoint (an HTTP session - remote breakpoint) and tried checking step by step if the value is being processed and put into the REQUTEXT field?
Bye,
Sameer

Calling java class from jsp page

Dear Friends.
I wrote jsp page and java class.
Am calling java class from jsp page. after processing result,
I have to refresh jsp page from java class.
processing time may take 5 minutes or 1 minute etc. that depends on user.
Can It be possible ? if possible , How ?

Ok, I get a very strange error now:
org.apache.jasper.JasperException: Unable to compile class for JSPerror: An error has occurred in the compiler; please file a bug report (http://java.sun.com/cgi-bin/bugreport.cgi).
What is this??? Anyone?

Calling Java API from ABAP using JCo

I need to call Java API from ABAP & BSP also. For this I have got useful information related to JCo from following blog:
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
But, I am facing one problem. On executing Java program myExample5.java (recommended by Gregor Wolf) from command line I get following error message:
Server JCOSERVER01 changed state from [ STOPPED ] to [ STARTED ]
Exception in server JCOSERVER01:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 26 13:46:32 IST 2007.
This is caused by either a) erroneous server settings, b) the backend system has
been shutdown, c) network problems. Will try next startup in 1 seconds.
Connect to SAP gateway failed
Connect_PM TPNAME=JCOSERVER01, GWHOST=gateway, GWSERV=3300
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname 'gateway' unknown
TIME        Thu Apr 26 13:46:32 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -2
MODULE      ninti.c
LINE        336
DETAIL      NiPGetHostByName2: hostname 'gateway' not found
SYSTEM CALL gethostbyname_r
COUNTER     1.
Can anyone please help me out. Do I need to do any setting?
I'll surely reward points.
Thanks & Regards,
Nilesh Kumar

Hi Nilesh,
From the error i think that the error is with the hostname.
Please enter the the Application Server IP/Hostname.
If you are loggin to SAP System "XX1" from SAP GUI. Then click the change Item tab and see Application server name/IP let say "XX2" for hostname or "xx.xx.xx.xx" for IP.
Replace <i>srv[0] = new Server("gateway","sapgw00","JCOSERVER01",repository);</i>
with <i>srv[0] = new Server("XX2","sapgw00","JCOSERVER01",repository);</i>
If App Server is IP then replace with
<i>srv[0] = new Server("xx.xx.xx.xx","sapgw00","JCOSERVER01",repository);</i>
Let me know if it is throwing any error.
Thanks,
Prashil

Call Java Program from ABAP Program

Dear all,
In our scenario, we need to let ABAP call services provided by a standalone Java program. From online help I found some overview introduction and I'd make the called program a registered program in a RFC with type "T" (TCP/IP Connection). Can anybody give some concrete documentation? A step-by-step guide would be greatly appreciated.
Best Regards
Jerome

check this thread
Re: Calling Java API from ABAP using JCo

Calling java APIs from a function module

Hi,
Can someone tell me whether it is possible to call Java APIs from a function module in SAP system?
Thanks in advance,
Vineetha

Hi,
I guess you have changed the properties of screen only.
I assume you have made a Ztransaction Code.
When you define a transaction code, you need to specify a screen number for radio option program and screen and you need to specify a screen and not subscreen.( I think so!!)
You changed only the code without changing the transaction code properties.
Therefore, i think u r getting a dump.
If you want to call your subscreen, call it in some screen and then call that screen using your transaction code properties.
To include a subscreen screen in the subscreen area of the main screen and call its PBO flow logic, use the following statement in the PBO event of the main screen:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING <prog> <dynp>.
To call the PAI flow logic of the subscreen screen, use the following statement in the PAI flow logic of the main screen:
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Refer:
http://help.sap.com/saphelp_webas630/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Regards,
Tanveer.
Please mark helpful answers.
Message was edited by: Tanveer Shaikh
Message was edited by: Tanveer Shaikh

Calling java classes from plsql procedures

I'm attempting to call java classes from plsql procedures which will create cmsdk users, folders, groups etc, however when I attempt to load a java class into the oracle schema using the command:
loadjava -user user/password@database -resolve classname.class
It generates error messages to the effect that classes (cmsdk classes) required by the class cannot be found. The class is loaded and marked with the status "invalid". Is it therefore necessary for me to load the cmsdk packages into the schema?
Cheers
David

Using CMSDK Java API within the database has never been supported
(see Problems loading IFS's java class into database
When we needed to invoke CMSDK code from our PL/SQL code, we used one of two approaches:
(1) use advanced queues to send requests to an external Java program (the CMSDK code, running outside the database) and receive the results back (asynchronous choice); or
(2) make an HTTP request to a Java servlet (the CMSDK code, running in some Java web container like iAS) and get the response back in some custom format (XML or something) (synchronous choice).
It seems to me that the CMSDK Java API was designed to be used only in middle-tier, not in database tier.
Regards,
Daniel.

Calling a java class from abap/bsp

Hello,
I am still learning ABAP. I need to call a java class (a chart drawing library) from ABAP or from a BSP. What is the best way to do that ?
Basically I would create an object, pass data from a database and then get some binary data from that object (an image).
Hope you can help me
Sincerely,
Olivier Matt

/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
check the above link and this forum too
Call Java Class and Methods from ABAP

Problem Calling a Java class from PLSQL function

We are calling a Java class through oracle function as
FUNCTION CalculateAMW (contributorid IN Number,
fromdate IN Date,OHorAnncoverage in Number,
OHAnncoverage in Number,
AppStatus in Number,
Status in Number)
RETURN Number
AS LANGUAGE JAVA
NAME 'AMWCalculations.calculateAMW
(long,java.sql.Timestamp,long,long,long,long) return double';
on execution of this function the sql prompt for the 1st time it is giving the output
but
if reexecute it is throwing and error ORA - 932 : Inconsistent
datatypes.
Recompiling the java class then it works for the 1st time and the next
time
we execute it throws error as explained above.
What could be the problem.
Thanks
Nanda Kishore

any idea???Yes, you are in the wrong forum, this is a Java forum, you have an ASP question, so i suggest you visit an ASP forum/site

Call Java Pgm from ABAP

Hi All,
I need to call a Java function from ABAP. Currently i work on client machine and i have a sample java program with me. What do i need to do in order to execute that Java program from ABAP se38 program?
1. Should i place that java program on server in order to execute?
2. How to maintain RFC Destination in SM59? what is meant by program id and gateway mentioned in in SM59 under create option.
Can some one help me with this regard?
Points will be awarded!!
Thanks in advance,

://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59ef6011-0d01-0010-bfb0-b51381e00509
http://www.erpgenie.com/abap/bapi/example.htm
Reward points if it is useful...

How to call java classes from javascript?

i have a button which calls javascript i need to access a class to update the values in the database.. how do you call the java code from within the javascript?
the class is stored under tomcats classes directory and is accessed:
com.Database.Employee
the method is called : UpdateEmployeeDetails
the button
<input type="button" value="Save" onclick="submitForm('save')" />the javascript
<script language="javascript">
        function submitForm(process){
            document.myForm.action="update.jsp";
            document.myForm.submit();
</script>

is it not possible?
do i have to refresh the page and read in the values like...
<%
String ename = request.getParameter( "EmployeeName");
     session.setAttribute( "ename", ename);
%>and then call the class from here?
looking around ive come across ajax but i dont know how to use it and what you need to install and if its compatable with tomcat and jsp?
is ajax better or not really worth it?
i have anything up to 100 fields that need saving at one save click

Call java class from xquery

Hi All,
I'm working on osb 11.1.1.5 version.As per my requirement i want to call the external java class from the Xquery (version 1.0).Anybody can u please provide me any links or examples?
Thanks in Advance!
Radhika.

Hi Prabu Thx for ur reply....without custom functions is there any possibilities to do this from xquery?

Calling java class from abap function moduile

Similar Messages

Maybe you are looking for