Calling JDialog from JPanel

Hi there, I will try to make this problem simple to understand,
I have a Jframe which makes use of Jpanels, in a seperate file I have made an extension of a Jpanel which has buttons and when one of these buttons is pressed I want to call up a JDialog from another seperate file. The problem is in the call up where I need the parent frame but I do not have it in the JPanel class i've created (hense this wouldnt work). Any ideas or is there an easier solution to this, I've searched the forum and I cannot find any suitable answers to this (or at least any i can understand)
Thank you for your time

Hi!
One way is to create a new JFrame as parent... it isn't right but it works....
In constructor call super(new JFrame(), "Dialog Title")Another one could be to send the reference from main frame to the dialog and use as owner frame...
/Andrew

Similar Messages

Newbie: should I use a JDialog or JPanel ?

I have inherited an app that is 50% complete and I need to add a new popup window that is displayed in response to a Pulldown menu selection.
The popup window will have 5 different text fields that will need to be passed back to the calling routine.
In the source code that I inherited, similar windows are created using a JDialog and sometimes using a JPanel (and I can't figure out why).
What are the upsides and downsides for choosing JDialog over JPanel ?
Thank you

This is a question of convenienve vs. reusability.
If you inherit your component from JDialog, it will be easy to set up the infrastructure:
- Return closes dialog:
rootPane().setDefaultButton(yourButton)- Closing triggers your code:
this.addWindowListener(myWindowListener}- Menu needed:
this.setJMenuBar(myMenuBar) - ...
But the downside is, that you can't reuse your component (possibly together with other components) inside a JFrame.
Sven

Calling method from another class problem

hi,
i am having problem with my code. When i call the method from the other class, it does not function correctly?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class Dice extends JComponent
    private static final int SPOT_DIAM = 9;
    private int faceValue;
    public Dice()
        setPreferredSize(new Dimension(60,60));
        roll();
    public int roll()
        int val = (int)(6*Math.random() + 1);
        setValue(val);
        return val;
    public int getValue()
        return faceValue;
    public void setValue(int spots)
        faceValue = spots;
        repaint();
    @Override public void paintComponent(Graphics g) {
        int w = getWidth();
        int h = getHeight();
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
        g2.setColor(Color.WHITE);
        g2.fillRect(0, 0, w, h);
        g2.setColor(Color.BLACK);
        g2.drawRect(0, 0, w-1, h-1);
        switch (faceValue)
            case 1:
                drawSpot(g2, w/2, h/2);
                break;
            case 3:
                drawSpot(g2, w/2, h/2);
            case 2:
                drawSpot(g2, w/4, h/4);
                drawSpot(g2, 3*w/4, 3*h/4);
                break;
            case 5:
                drawSpot(g2, w/2, h/2);
            case 4:
                drawSpot(g2, w/4, h/4);
                drawSpot(g2, 3*w/4, 3*h/4);
                drawSpot(g2, 3*w/4, h/4);
                drawSpot(g2, w/4, 3*h/4);
                break;
            case 6:
                drawSpot(g2, w/4, h/4);
                drawSpot(g2, 3*w/4, 3*h/4);
                drawSpot(g2, 3*w/4, h/4);
                drawSpot(g2, w/4, 3*h/4);
                drawSpot(g2, w/4, h/2);
                drawSpot(g2, 3*w/4, h/2);
                break;
    private void drawSpot(Graphics2D g2, int x, int y)
        g2.fillOval(x-SPOT_DIAM/2, y-SPOT_DIAM/2, SPOT_DIAM, SPOT_DIAM);
}in another class A (the main class where i run everything) i created a new instance of dice and added it onto a JPanel.Also a JButton is created called roll, which i added a actionListener.........rollButton.addActionListener(B); (B is instance of class B)
In Class B in implements actionlistener and when the roll button is clicked it should call "roll()" from Dice class
Dice d = new Dice();
d.roll();
it works but it does not repaint the graphics for the dice? the roll method will get a random number but then it will call the method to repaint()???
Edited by: AceOfSpades on Mar 5, 2008 2:41 PM
Edited by: AceOfSpades on Mar 5, 2008 2:42 PM

One way:
class Flintstone
    private String name;
    public Flintstone(String name)
        this.name = name;
    public String toString()
        return name;
    public static void useFlintstoneWithReference(Flintstone fu2)
        System.out.println(fu2);
    public static void useFlintstoneWithOutReference()
        Flintstone barney = new Flintstone("Barney");
        System.out.println(barney);
    public static void main(String[] args)
        Flintstone fred = new Flintstone("Fred");
        useFlintstoneWithReference(fred); // fred's the reference I"m passing to the method
        useFlintstoneWithOutReference();
{code}
can also be done with action listener
{code}    private class MyActionListener implements ActionListener
        private Flintstone flintstone;
        public MyActionListener(Flintstone flintstone)
            this.flintstone = flintstone;
        public void actionPerformed(ActionEvent arg0)
            //do whatever using flinstone
            System.out.println(flintstone);
    }{code}
Edited by: Encephalopathic on Mar 5, 2008 3:06 PM

ProcesskeyEvent not invoked in JDialog andin JPanel

I have overriden processKeyEvent in my class but this method never gets invoked on typing or pressing
a key but the processMouseEvents are invoked properly the JDK Version which I am using is
1.4.1_01 .Please guide what else should be done to handle key events for JDialog or Jpanel
import java.awt.*;
import javax.swing.*;
import java.awt.event.KeyEvent;
import java.awt.event.MouseEvent;
* Title: 
* Description: 
* Copyright: Copyright (c) 2004
* Company: 
* @author not attributable
* @version 1.0
public class TestDialog extends JDialog {
public TestDialog(){
this.getContentPane().setLayout(null);
JButton jb = new JButton("HJHJH");
jb.setBounds(10,10,100,30);
this.getContentPane().add(jb);
this.enableEvents(AWTEvent.KEY_EVENT_MASK |AWTEvent.MOUSE_EVENT_MASK);
setSize(300,300);
setVisible(true);
public void processKeyEvent(KeyEvent keyEvent){
System.out.println("Key Event Called");
public void processMouseEvent(MouseEvent mouseEvent){
System.out.println("Mouse Event Called");
public static void main(String args[]){
new TestDialog();

Hi
Any component is passed events through processXXX() methods only if the component has focus.
Components like JPanel and JDialog never gain focus as the focus manager in java does not define focuses for a panel or JDialog . instead interactive comp.s like JButton , JTextField have focuses.
Override the setVisible(boolean) method as
public void setVisible(boolean b)
super.setVisible(b);
mycomp.grabFocus();
After this do not click the mouse anywhere else , if clicked the focus will again be lost.
try pressing keys and u'll know why it was happening.
Have fun..
Fire an reply trying this.
RGDS

Help with calling up a JPanel

I posted a simular problem to this earlier, but got tottally muddled up in what i was writing. I have been stuck on this now for quite a while and its problably really straight forward. Basically i have a class called Meet which extends a JPanel as it is using JTabbedPane and i followed a sun tutorial. Now this JPanel gets added to a JFrame in my code through
 JFrame frame = new JFrame("MEET_dataTable");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.add(new Meet(), BorderLayout.CENTER);
 frame.pack();
 frame.setVisible(true);Now this class all works great when run alone. But then in another class which extends a JFrame, one of the buttons should be calling up the above Meet class. So i declared Meet meet; and i created the CreateAtlDatabase_actionPerformed method.
 private void CreateAtlDatabase_actionPerformed()
 meet = new Meet();
 this.dispose();
 } But everytime this button is pressed, the whole program crashes. I have also tried different ways, for instance i removed the JFrame code from my Meet class and placed it in my CreateAtlDatabase_actionPerformed method, so that the frame is created on request, but then i have problems disposing of the gui in my Meet class. The circle continues. Any advise on what i can do would be great.

But everytime this button is pressed, the whole program crashes.By this i mean when i press the button, the whole application just freezes, and then after quite a long time my command line displays
Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap spa
ce
 at javax.swing.plaf.basic.BasicTabbedPaneUI.createScrollButton(BasicTabb
edPaneUI.java:305)
 at javax.swing.plaf.basic.BasicTabbedPaneUI$ScrollableTabSupport.createB
uttons(BasicTabbedPaneUI.java:3253)
 at javax.swing.plaf.basic.BasicTabbedPaneUI$ScrollableTabSupport.<init>(
BasicTabbedPaneUI.java:3238)
 at javax.swing.plaf.basic.BasicTabbedPaneUI.installComponents(BasicTabbe
dPaneUI.java:258)
 at javax.swing.plaf.basic.BasicTabbedPaneUI.installUI(BasicTabbedPaneUI.
java:206)
 at javax.swing.plaf.basic.BasicTabbedPaneUI$Handler.propertyChange(Basic
TabbedPaneUI.java:3521)
 at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSup
port.java:339)
 at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSup
port.java:276)
 at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSup
port.java:297)
 at java.awt.Component.firePropertyChange(Component.java:7908)
 at javax.swing.JComponent.firePropertyChange(JComponent.java:4454)
 at javax.swing.JTabbedPane.setTabLayoutPolicy(JTabbedPane.java:536)
 at Meet.<init>(Meet.java:264)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)
 at Meet.<init>(Meet.java:268)I then took this code out of my Meet class(class which extends the JPanel)
 JFrame frame = new JFrame("MEET_dataTable");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.add(new Meet(), BorderLayout.CENTER);
 frame.pack();
 frame.setVisible(true);And i place it in the action event of the class that calls up the JPanel.
 private void CreateAtlDatabase_actionPerformed()
 JFrame frame = new JFrame("MEET_dataTable");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.add(new Meet(), BorderLayout.CENTER);
 frame.pack();
 frame.setVisible(true);
 this.dispose();
 } Now that seems to do the trick, i just wasnt sure if it was allowed. But in doing this another problem is created. In my Meet class, i have a go back button which should return the user to the JFrame gui and dispose of the JPanel gui. But of course you cannot use this.dispose() on a JPanel and i no longer have the JFrame to which the panel is added in this class, which means i cant dispose of its JFrame. I have tried using System.exit(0) but this closes everything, and my last attempt has been
private void back_actionPerformed()
 this.getParent().setVisible(false);
 CreateAtlDatabase data = new CreateAtlDatabase();
Which removes the JPanel but leaves an empty JFrame. Now this is where i am stuck, how can i dispose of this? and of course is the moving of my JFrame to my other class ok?
cheers

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

How can I access my Call Handlers from outside line (outside district)

CISCO VoIP System Info:
Cisco Unity Connection version: 8.6.2ES25.21900-25
CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district. Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers. However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.). We cannot access from an outside line. 7800 is not a DID, it is simply the extension he assigned to access the call handlers. I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either. It forwards to the extension's voicemail. Is there a way we can access the Call Handlers from an outside line? Any help would be gretaly appreciated. Thank you in advance.

Hey Joseph,
Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
What you are trying to get to is really just the Greetings Administrator
conversation and there are multiple ways to get there.
For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
and when he calls his own number from home once his greeting
kicks in he can press 7 to link to the Greetings Administrator conversation
or
You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
Greetings Administrator. Make sure to move this rule to the bottom of the list!!
Cheers!
Rob
"Why do the best things always disappear "
- The Band

Call tcode from alv report and passing group of values

hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank you

Dear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

Calling Report from Menu (Oracle Forms 10g)

We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

Here is the code to call report from menu in 10g
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
               --Display report in the browser
               WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
 T_OUTTAB =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
 IF rs_selfield-fieldname = 'BELNR'.
 read table it_e into wa_e index rs_selfield-tabindex.
 if sy-subrc = 0.
 lv_date = wa_e-budat(4).
 endif.
 SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
 SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
 SET PARAMETER ID 'GJR' FIELD lv_date.
 call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
 endif.
 ENDCASE.
ENDFORM. "user_comm

How to call servlet from jsp

i m trying to call it from jsp using
<a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
but its giving error..
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed for the requested resource (HTTP method GET is not supported by this URL).

i m trying to call it from jsp using
<a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
but its giving error..
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed
for the requested resource (HTTP method GET is not
supported by this URL).Are you implementing the doGet or doPost method in your servlet? If you are calling from a hyperlink then it needs to be implementing the GET method. To access the POST method use a html form.

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Getting rep-3002 when calling report from form on web

i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Calling JDialog from JPanel

Similar Messages

Maybe you are looking for