Calling Matlab from Labview returns a 1047 error - what am I doing wrong

above

Does your script work fine in MATLAB? Do you run a VI or an .exe?
MATLAB must be running, otherwise LabVIEW will be unable to access the MATLAB server. This will cause the 1047 error. Manually start MATLAB, and your program should run without the error.
The following KnowledgeBase may also be useful in troubleshooting this issue
LabVIEW 6.x and Earlier Does Not Interface Properly with MATLAB 6.1 or MATLAB 6.5
Zvezdana S.
National Instruments

Similar Messages

I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

I am new to iPad. I am trying to download a movie and it tells me "download error" what am i doing wrong?

I am trying to download a movie from iTunes and it gives me an error message "download error - retry" what am I doing wrong??

I must found this tip when I did a Google search. The text inside of the quotation marks is from this site.
http://www.eddieoneverything.com/articles/how-to-fix-the-ipodiphone-download-err or-tap-to-retry-error-without-using-your-pc.php
"I had this problem as well, however I did find one way to get this to download on my iPhone. What I found that worked was to tap to retry the download and as it’s attempting to download it again I hit the pause button (I had to be quick). Once it was paused I hit the button again to resume the download and it successfully completed. I hope this helps some of you out until Apple fix this bug."
This was posted in an iPhone forum, but it applies to the iPad as well. Maybe this will work for you.

With iOS 6 on my 4th gen iTouch I am finding I no have to delete the playlist from my iTouch, not the when I sync. Now the paylist is being deleted from my library as well. What am I doing wrong?

With the new iOS 6 I have to use on my old iTouch (4th gen) instead of deleting a playlist thru the sync, I was instructed to delete it on the device. Now when I sync I am finding the playlist has been deleted from the library as well. I just want it off teh device, not erased. What am I doing wrong?

See these previous discussions:
Waiting applications: Apple Support Communities
Downloading apps stuck on waiting...: Apple Support Communities

Cant save images from goggle to ipad any more what am I doing wrong pls

CAnt save image from goggle to ipad any more keeps saying save image failed what am I doing wrong pls

If by "goggle" you mean the Google Chrome browser, then make sure its allowed to use the Camera Roll under Settings->Privacy->Photos, and make sure Chrome is turned on there.
If that's not it perhaps explaining in a bit more detail what you are doing, and what happens when you try to save a picture?

Easiest way to call MATLAB from Labview

I have a bunch of MATLAB scripts I've developed over the years. I'd
like to have Labview collect data and pass it off to my MATLAB scripts
for plotting and analysis as it is streaming in. What is the easiest
way for me to do this?
Thanks for your help,
Matthew Little

[email protected] (Matthew Little) wrote in message news:<[email protected]>...
> I have a bunch of MATLAB scripts I've developed over the years. I'd
> like to have Labview collect data and pass it off to my MATLAB scripts
> for plotting and analysis as it is streaming in. What is the easiest
> way for me to do this?
>
> Thanks for your help,
> Matthew Little
Matthew:
Have you tried the Matlab script container in the Mathematics->Formula
function palette? This node allows you to put your scripts into the
Labview diagram. I haven't tried it myself, but it should work. Good
luck.
sm

ITunes Library Error - what am I doing wrong??

I just bought a new 80 GB video iPod and wanted to import my existing library (I was previously using a nano). When I uploaded the info for my new iPod I got errors from Windows opening iTunes and it kept shutting down my internet connection saying that Windows was experiencing errors - would I like to report.
I completely uninstalled and reinstalled iTunes. The install was sucessful, however when I try to open iTunes for the first time to access my library, I get the following message:
The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.
The only option it gives me is to hit the "OK" button and exit out of the program. I've uninstalled and reinstalled, restarted and read the FAQ's on iTunes, scanned my PC for viruses and uninstalled everything that might be conflicting - nothing has allowed me to get past this error.
What are my next steps?
Thanks in advance - P. Pittman
HP Pavilion zv6000 Windows XP

I just bought a new 80 GB video iPod and wanted to import my existing library (I was previously using a nano).
Are you importing the "iTUnes Library/xml" file from one PC to another, or do you mean your trying to import your library/songs from a nano?

I am trying to restore my new ipod touch and it is coming up as error, what am i doing wrong?

I am trying to restore my sons new ipod touch i am trying to restore it but it keeps coming up as error 1611, i have removed all security software and tried again but it has made no difference, any advice?

Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694
As the article says, you may have a hardware problem.

Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.) I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

Downloaded your operating manual. It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection). The picture on page13 seems to be the clearest I could find:
Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
Note, if that truly is a 3.5 mm stereo jack cables are very common. In your case it would just be a cable with a 3.5 mm jack on each end.
Update:
You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?). The manual is not clear on this (page 31). Sometimes it just comes down to pushing buttons.

Calling Matlab from Java

Hi everybody,
I need to call Matlab from Java, run some programs in matlab and get the standard output.
I know I can start matlab with:
Process proc = Runtime.getRuntime().exec("matlab");
But then how do i run a program in matlab? (For example, if I have "myprogram.m", I would run it in matlab by typing "myprogram")
If I start a new process [Process proc2 = Runtime......exec("myprogram")], it does not start in matlab.
Any ideas?
thanx in advance.

Sounds like myprogram is just a parameter of a call to matlab.
Try some variations on
exec("matlab myprogram");
There is also - I believe - an exzec call that takes an array of parameters.

I downloaded an album from iTunes and some of the songs downloaded but others didn't there was an error message 8003 Unknown error occurred. While I downloaded the album to my phone, it wouldn't download to my mac, what am I doing wrong???

I purchased an album on ITunes store, while the items downloaded to my phone, it didn't download to my mac. Some of the songs downloaded but not the majority, when I try to download the songs, it gives me an error 8003 Unknown error occured. What am I doing wrong? If I can't download this album, how do I get a credit??

Hello mercdw,
Once the music has been downloaded to your iPhone, you can transfer purchases from your device to iTunes.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Alternatively, the following article provides further information regarding this error and steps that can help resolve the issue.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Allen

I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?

I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

AppleScript to call a Photoshop Script: what am I doing wrong?

Hi All.
I'm using AppleScript to try and call a photoshop Java script stored in my *** project.
The basic set up is:
Tell Application Photoshop CS3
set myscript to POSIX path of ((path to me as Unicode text) & "Contents:Resources:Equipment_ProductSilosthumb.js")
do javascript myscript
end tell
when i try and run the script i get the following error
- Error 25: Expected: ;.
Line: 1
-> /Users/amannone/Production Tools CS3/build/Debug/Production Tools.app/Contents/Resources/Equipment_ProductSilosthumb.js (8800)
If i embed the script in the apple script it will work ok.
ie do javascript "insert js code here"
What am I doing wrong?
Software: Adobe CS3 Extended, Mac OS X 10.5, Xcode 3
Thank for the help.
-andrew

Your description of the issue is not clear:
What format, bit depth and color was your original file "from the net"? It sounds like it was a Color Indexed GIF, which would cause what you are describing.
In the Macintosh Finder, select said "net image" and do a Get Info on it (Command+i). When the Info box appears in the Finder, take a screen shot and upload it here by using the little camera icon in the Reply Editor in the forum's web interface.
If the image is a 256-color GIF, remember the rule: GIGO = garbage in, garbage out.

Calling Matlab from Labview returns a 1047 error - what am I doing wrong

Similar Messages

Maybe you are looking for