Calling minnesota from california

I have the freedom essentials plan and I live in California. i'd like to know if i can call minnesota without being charged.

From the previously posted link...
Tutorial - Perl and Java
SYNOPSIS
Java and Perl have different strengths and complement each other well.
You can connect them at runtime with tools such as JPL, PJC, or ActiveX. In
theory, you can convert Perl to Java bytecode, and vice-versa.
Note:
Not actually a conversion.
At this stage, we are generating Java opcodes by walking Perl's syntax tree.
This is very different from converting Perl to Java. It's a lot easier!Java source with embedded perl, or perl with embedded java, depending on your perspective. Cool!!! Double way cool with cherries on top.
I honestly had no idea that such a thing existed. Thank you.
Edited by: corlettk on Feb 12, 2008 1:20 PM
Note: At the time this presentation was prepared, JPL did not work with Perl for Win32. However, JPL is in the core Perl distribution, and there are plans to make it work with Perl for Win32. With that in mind, I'm presenting the JPL material first, because it is of interest to both Win32 and Unix Perl people. The Win32-specific stuff (alternatives to JPL) will come last. I won't be offended if the Unix people leave when I get to this section ...
A subset of JPL now works on Win32. You can embed Java in Perl, but you cannot embed Perl in Java (yet).

Similar Messages

Erica Phone rep from California call center said order is placed and awaiting supervisor's approval, but NOTHING was placed and no follow up

Erica Phone rep from California call center said order is placed and awaiting supervisor's approval, but NOTHING was placed and no follow up. I'm very displeased with Verizon customer Service. I guess I should expect that, given they are this giant and why should they care about 1 customer, even if its a very loyal one.
I was told that my order for an iPhone is placed and all it need is to get an approval from supervisor for a $300 coupon off a regular priced device. This "need supervisor's approval" apparently is how Verizon reps get people off the line and forget about any promises made. I called to follow-up and was told that someone from the call center will call me back. Guest What??? No one did, even after I went to the corporate store in downtown San Francisco and spoke to the store manager there.
I guess I should lower my expectations about a company which spends billions on advertisement, but delivers empty promises.

gvitalik - You'll need to send a Follow request (located in the upper right-hand corner of their profile page) to AyaniB_VZW that they'll have to approve. They likewise will need to send you a Follow request that you'll have to approve. Once you both are Following each other, then you can send them a Direct Message.
How To: Direct Message

Why does Verizon call me from unrecognized CA number - 949-286-3973?

It appears that you (Verizon) are calling my cell phone from an unidentified California number - 949-286-3973. From a brief search on the Internet, this seems to be what you are doing. PLEASE STOP DOING THIS!!! I understand it to be a survey about customer service but I do not answer scam calls (any number I don't recognize is a scam caller to me, especially a robo call that does not leave a message). This is the same complaint you know you have heard repeatedly from a lot of your customers but you have determined that you don't care and just keep on doing it. Every time it happens, we have to take the time to research it and figure it out, total bull and you are ******* customers off. Call them from a recognized number or do not call them at all.
This is just like the problem I called about a few weeks ago where you allow $3 to be charged by your company representatives (Verizon brick and mortar store) to process a CASH payment, how stupid is that? IT'S CASH!!! DAH! Dumbest thing I've ever heard, and yes it is your responsibility regardless or your insistence that they are franchised, you allow them to access your system to process the payments, that is totally on you and to say otherwise is just a lie.
Again, I and most customers consider these type of unrequested unrecognized calls a form of harassment. If you are trying to improve your processes and customer relations, you are going about it in completely the wrong way!

cf1234 wrote:
It appears that you (Verizon) are calling my cell phone from an unidentified California number - 949-286-3973. From a brief search on the Internet, this seems to be what you are doing ... Every time it happens, we have to take the time to research it and figure it out ...
I got a call today from this number - since I use my phone as a business phone and do get calls from clients or potential clients that I do not have in my contact list (yet), I DO answer calls where I do not recognize the number.
I answered it, it was a survey, took about 3 minutes to punch in a few numbers, and then hang up. They probably won't call again unless I call customer service again, which was what triggered this call today.
You've done the research, take the survey and be done with it.

Is there a Mac guru who makes house calls in Concord, California? I'm getting the runaround between the Genius Bar and Adobe Support.

Is there a Mac guru who makes house calls in Concord, California.? I'm getting finger pointing between the Genius Bar and Adobe Support. It;s been a week and I'm at my wit's end.

I upgraded from OS X 10.4.1 to Snow Leopard 10.6.8. After lots of application problems I took the computer to the Genius Bar. The computer upgrade was given the "thumbs up". They said the problems are with licensing issues with Adobe Creative Suite 4. The other application problems could be resolved by just uninstalling Microsoft Office and reinstalling it. The Microsoft Office reinstall seems to have gone well, however it is still slow to open and the color wheel spun extra-long on this morning's first opening.
We are operating two accounts on our one Mac Pro computer. Since the upgrade, we can not both have an Adobe application open at the same time. They work fine when only opened on one desktop, but we get an "ATM Subsystem Failure" notice when the program attempts to open on the other desktop. I've spent many hours on the phone with Adobe, they helped me remotely to reinstall CS4, but the problem remains. Finally, last night, the tech guy said that it has to be an Operating System failure and to take the computer back to Apple.
Frustration prompted my writing. I have a call in to someone local who may be able to help, who knows!

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

How can I access my Call Handlers from outside line (outside district)

CISCO VoIP System Info:
Cisco Unity Connection version: 8.6.2ES25.21900-25
CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district. Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers. However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.). We cannot access from an outside line. 7800 is not a DID, it is simply the extension he assigned to access the call handlers. I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either. It forwards to the extension's voicemail. Is there a way we can access the Call Handlers from an outside line? Any help would be gretaly appreciated. Thank you in advance.

Hey Joseph,
Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
What you are trying to get to is really just the Greetings Administrator
conversation and there are multiple ways to get there.
For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
and when he calls his own number from home once his greeting
kicks in he can press 7 to link to the Greetings Administrator conversation
or
You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
Greetings Administrator. Make sure to move this rule to the bottom of the list!!
Cheers!
Rob
"Why do the best things always disappear "
- The Band

Call tcode from alv report and passing group of values

hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank you

Dear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

Calling Report from Menu (Oracle Forms 10g)

We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

Here is the code to call report from menu in 10g
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
               --Display report in the browser
               WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
    T_OUTTAB                       =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
                 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'BELNR'.
    read table it_e into wa_e index rs_selfield-tabindex.
    if sy-subrc = 0.
    lv_date = wa_e-budat(4).
    endif.
    SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
    SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
    SET PARAMETER ID 'GJR' FIELD lv_date.
    call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
    endif.
    ENDCASE.
ENDFORM. "user_comm

How to call servlet from jsp

i m trying to call it from jsp using
<a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
but its giving error..
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed for the requested resource (HTTP method GET is not supported by this URL).

i m trying to call it from jsp using
<a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
but its giving error..
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed
for the requested resource (HTTP method GET is not
supported by this URL).Are you implementing the doGet or doPost method in your servlet? If you are calling from a hyperlink then it needs to be implementing the GET method. To access the POST method use a html form.

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Getting rep-3002 when calling report from form on web

i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Calling Report From Form To Many Destinations

Hi
I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object.
I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and file what is the best way to distribute the report?
I could call my procedure for each destination but that seems a bit unefficient since the report would be created many times, is there another way?

what about adding a drop-down-list near your report-button where you can choose the destination?
when you click the report-button you simply read the value selected in the drop-down-list and send it to your reports-server too.

Calling minnesota from california

Similar Messages

Maybe you are looking for