Calling multiple DB functions in same analysis throws Invalid Identifier

Hi all,
I am trying to invoke multiple database functions using evaluate function in a report, and as soon as I add the second function, I keep running into the below error. As you all know we could call two functions in a single select statement, so I would assume it to work the same way in BI.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 904, message: ORA-00904: : invalid identifier at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Has anyone ran into this issue before ?
Thanks,
-A.Y.

veeravalli wrote:
Hi Amith,
Can you try with only second funtion (excluding first evaluate) and with other columns? to make sure your 2nd evaluate function is fine.Yes, they all work if used individually. Combining each other is causing the issue.
As a work around I am writing a package to merge everything together for now, but it would be nice to have this feature.
One thing to note is if you actually take the physical sql and run it against database, it works just fine.

Similar Messages

How can I call multiple records(40) at same time as webservice ?

Hi All
My scenario is some thing like calling SOAP(Webservice) to Rfc(BAPI)
Thing is how can i call multiple records at the same time using the SOAP
adapter i.e i need to make a request to BAPI and in the BAPI response
based on the fields, i need to send to different records....it is Sync call
Can any explain me how to implement this scenario ?
Regards
Kiran lvs

HI,
Please see the below link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
Regards
Chilla..

How to call multiple stored procedure from same DB Adapter

Hi,
I want to invoke 3 stored procedures from my message flow in BUS . I created a DB adapter and invoked 1 successfully . Now I don't to configure 2 other DB adapters for calling other 2 stored procedures . I want some how to be able to call the other 2 from the first DB adapter only . Somehow I need the flexibility to have procedure names as the operation names in 1 wsdl and be able to configure this in JDeveloper for this at time of DB adapter configuration . I am using 11G . Is it possible ?

You can probably create a DB adapter with operation type selected as Execute Pure SQL and write SQL code to invoke the stored procedures depending on the procedure name (which you can get as one of the parameters of DB Adapter).
However, Even if you were able to do it, the DB Adapter schemas are generated based on stored procedure parameter list and types. If you use Execute Pure SQL type of DB Adapter the schema will be generated based on the parameters which you are using in your custom SQL code within DB Adapter. Which means that if you want to add a new stored procedure as target which has a different name and different parameters then you will need to regenerate the DB adapter and update your custom SQL code. This also means that you will need to do regression testing interfaces to all stored procedures whenever there is any change in this DBAdapter.
Now, my question is why do you want to invoke multiple stored procedures from same DB adapter?
This is not a good way to design integration solutions and makes your services resistance to change as it will take more time to change and test.
If all that you want is to have a web service which can have different operations for different stored procedures then you should create three business services and create a wrapper proxy service which has one operation for each stored procedure, within the proxy transform and call the correct backend service (you can use operational branch). This way you have a modular code where each module (read interface to one stored procedure) can be independently modified and tested.

Finalize() method being called multiple times for same object?

I got a dilly of a pickle here.
Looks like according to the Tomcat output log file that the finalize method of class User is being called MANY more times than is being constructed.
Here is the User class:
package com.db.multi;
import java.io.*;
import com.db.ui.*;
import java.util.*;
* @author DBriscoe
public class User implements Serializable {
    private String userName = null;
    private int score = 0;
    private SocketImage img = null;
    private boolean gflag = false;
    private Calendar timeStamp = Calendar.getInstance();
    private static int counter = 0;
    /** Creates a new instance of User */
    public User() { counter++;
    public User(String userName) {
        this.userName = userName;
        counter++;
    public void setGflag(boolean gflag) {
        this.gflag = gflag;
    public boolean getGflag() {
        return gflag;
    public void setScore(int score) {
        this.score = score;
    public int getScore() {
        return score;
    public void setUserName(String userName) {
        this.userName = userName;
    public String getUserName() {
        return userName;
    public void setImage(SocketImage img) {
        this.img = img;
    public SocketImage getImage() {
        return img;
    public void setTimeStamp(Calendar c) {
        this.timeStamp = c;
    public Calendar getTimeStamp() {
        return this.timeStamp;
    public boolean equals(Object obj) {
        try {
            if (obj instanceof User) {
                User comp = (User)obj;
                return comp.getUserName().equals(userName);
            } else {
                return false;
        } catch (NullPointerException npe) {
            return false;
    public void finalize() {
        if (userName != null && !userName.startsWith("OUTOFDATE"))
            System.out.println("User " + userName + " destroyed. " + counter);
    }As you can see...
Every time a User object is created, a static counter variable is incremented and then when an object is destroyed it appends the current value of that static member to the Tomcat log file (via System.out.println being executed on server side).
Below is the log file from an example run in my webapp.
Dustin
User Queue Empty, Adding User: com.db.multi.User@1a5af9f
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 1
User Dustin destroyed. 1
User Dustin destroyed. 1
User Dustin destroyed. 1
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
Joe
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin pulled from Queue, Game created: Joe
User Already Placed: Dustin with Joe
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
INSIDE METHOD: false
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
User Dustin destroyed. 9
User Joe destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
INSIDE METHOD: true
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
INSIDE METHOD: true
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
It really does seem to me like finalize is being called multiple times for the same object.
That number should incremement for every instantiated User, and finalize can only be called once for each User object.
I thought this was impossible?
Any help is appreciated!

Thanks...
I am already thinking of ideas to limit the number of threads.
Unfortunately there are two threads of execution in the servlet handler, one handles requests and the other parses the collection of User objects to check for out of date timestamps, and then eliminates them if they are out of date.
The collection parsing thread is currently a javax.swing.Timer thread (Bad design I know...) so I believe that I can routinely check for timestamps in another way and fix that problem.
Just found out too that Tomcat was throwing me a ConcurrentModificationException as well, which may help explain the slew of mysterious behavior from my servlet!
The Timer thread has to go. I got to think of a better way to routinely weed out User objects from the collection.
Or perhaps, maybe I can attempt to make it thread safe???
Eg. make my User collection volatile?
Any opinions on the best approach are well appreciated.

IPhone - Sybase RFC called multiple times

Hi,
I have an RFC that is adding some data in the system. This works, how ever it gets called multiple times with the same data. Every time a synchronization is done it adds a new row with all the same data. (even with 1 entry so it's not because of the loop).
This is how my save function looks, newEntriesMBO is an array with Synchronization parameters. Should I do anything more than [sync delete]?
        for (TimeSheets_EnterTimeDataSynchronizationParameters *sync in newEntriesMBO)
            [sync save];
            while ([TimeSheets_TimeSheetsDB hasPendingOperations])
                [NSThread sleepForTimeInterval:0.2];
            [sync delete];
Edited by: PJ Deraedt on Sep 19, 2011 11:06 AM

Hi
Once the personalization parameters are set ,you should call [pp save];
the next step would be to check for pending operations
while (TimeSheets_TimeSheetsDB hasPendingOperations)
NSThread sleepForTimeInterval:0.2;
Thats it no more code. sync delete etc is all not required. The reason why u get multiple calls is because pp save function is called multiple times.
Thanks
Pradeep

Calling multiple times BAPI_GOODSMVT_CREATE getting error

Hi Friends,
I am calling multiple times BAPI_GOODSMVT_CREATE for same Purchase order to post goods receipt.
for the first 4 times it is creating the GR successfully, but then it returning the message 'No goods receipt possible for purchase order 4500001004 01350'.
Please help.
Thanks
Ravi

Use Wait up to statement in loop.
Ex:
loop at it_filedir1.
    REFRESH I_TAB.
    CLEAR I_TAB.
   REFRESH I_TAB2.
   REFRESH ITAB1.
    data: g_file(100) type c .
    name = it_filedir1-name.
    concatenate: gfile '\' name into g_file.
    data : i_tab1(500).
    OPEN DATASET g_file FOR INPUT IN TEXT MODE
                                     ENCODING DEFAULT
                                     IGNORING CONVERSION ERRORS.
    IF SY-SUBRC EQ 0.
      DO.
        READ DATASET g_file INTO i_tab1.
        if sy-subrc = 0.
          split i_tab1 at ',' into I_TAB-SOL_DOCNO I_TAB-SOL_DOCDT
           I_TAB-GI_TXN_TYPE I_TAB-WERKS I_TAB-LGOBE I_TAB-MATNR
           I_TAB-ERFMG I_TAB-ERFME.
        else.
          exit.
        endif.
        APPEND I_TAB.
        clear I_TAB.
      ENDDO.
    ENDIF.
    CLOSE DATASET g_file.
    concatenate: hfile '\' name into h_file.
    REFRESH I_MAIN.
    CLEAR I_MAIN.
    I_MAIN[] = I_TAB[].
    REFRESH I_OUT.
    CLEAR I_TAB.
    I_OUT[] = I_TAB[].
    DELETE ADJACENT DUPLICATES FROM I_TAB COMPARING SOL_DOCNO.
    SORT I_TAB BY SOL_DOCNO.
    LOOP AT I_TAB.
      count = sy-tabix.
      SELECT SINGLE * FROM ZMM_GI_WIP
                                WHERE GI_NO = I_TAB-SOL_DOCNO AND
                                GI_DATE = I_TAB-SOL_DOCDT.
      IF SY-SUBRC = 0.
        I_TAB-FLAG = 'C'.
        modify i_tab index count.
        CONCATENATE 'ERROR GI : ' I_TAB-SOL_DOCNO
        ' WAS ALREADY UPLOADED' INTO I_MSG1.
        APPEND I_MSG1.
        CLEAR I_TAB-FLAG.
        CONTINUE.
      ELSE.
        CONCATENATE I_TAB-SOL_DOCDT+4(2)
                    I_TAB-SOL_DOCDT+6(2)
                    I_TAB-SOL_DOCDT+2(2)
                    I_TAB-SOL_DOCDT+0(2)
                    INTO G_DATE.
        gmhead-pstng_date = G_DATE.
        gmhead-doc_date = sy-datum.
        gmhead-pr_uname = sy-uname.
"01 - MB01 - Goods Receipts for Purchase Order
        gmcode-gm_code = '03'.
        refresh itab.
        clear itab.
        SORT I_MAIN BY SOL_DOCNO.
        LOOP AT I_MAIN WHERE SOL_DOCNO = I_TAB-SOL_DOCNO.
          IF I_MAIN-GI_TXN_TYPE = 'RMGI'.
            itab-move_type = '291'.
          ENDIF.
          itab-mvt_ind    = ' '.
          itab-plant      = I_MAIN-WERKS.
          itab-material   = I_MAIN-MATNR.
          itab-entry_qnt = I_MAIN-ERFMG.
         itab-stge_loc   = 'OMR1'.
itab-move_stloc = pcitab-recv_loc.
          itab-stge_loc   = I_MAIN-LGOBE.
          itab-ENTRY_UOM = I_MAIN-ERFME.
          IF I_MAIN-WERKS = 'OMR'.
            itab-TR_PART_BA = '11'.
          ELSEIF I_MAIN-WERKS = 'OMR'.
            itab-TR_PART_BA = '12'.
          ENDIF.
          append itab.
        ENDLOOP.
        if not itab[] is initial.
          call function 'BAPI_GOODSMVT_CREATE'
           exporting
               goodsmvt_header             = gmhead
               goodsmvt_code               = gmcode
             *   TESTRUN                     = ' '
          IMPORTING
              goodsmvt_headret            = mthead
         *   MATERIALDOCUMENT            =
MATDOCUMENTYEAR             =
           tables
             goodsmvt_item               = itab
GOODSMVT_SERIALNUMBER       =
            return                      = errmsg.
          clear errflag.
          loop at errmsg.
            if errmsg-type eq 'E'.
              write:/'Error in function', errmsg-message.
              errflag = 'X'.
            else.
              write:/ errmsg-message.
            endif.
            move errmsg-message to i_msg1.
            append i_msg1.
          endloop.
          if errflag is initial.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            WAIT          =
          IMPORTING
            RETURN        =
           commit work and wait.
            if sy-subrc ne 0.
              write:/ 'Error in updating'.
              exit.
            else.
              write:/ mthead-mat_doc, mthead-doc_year.
              ZMM_GI_WIP-GI_NO = I_TAB-SOL_DOCNO.
              ZMM_GI_WIP-GI_DATE = I_TAB-SOL_DOCDT.
              INSERT ZMM_GI_WIP.
              COMMIT WORK.
              I_TAB-FLAG = 'C'.
              MODIFY I_TAB INDEX COUNT.
              CONCATENATE mthead-mat_doc mthead-doc_year
                         into i_msg1.
              append i_msg1.
             perform upd_sta.
            endif.
          endif.
        endif.
      ENDIF.
       wait up to 20 seconds.
    ENDLOOP.

Multiple instances of the same VI running in parallel

Hi,
I have a timestamping subVI that looks at a counter channel and applies timestamps. I want to create multiple instances of this subVI (8 to be exact) and have them all run in parallel (looking at 8 different channels). Someone gave me the following advice:
>>
Also, in case you want to call multiple instances of the same SubVI, and you want these multiple instances to execute in parallel, you will have to set the SubVI to execute in reentrant mode. Do this by opening the SubVI and going to "Edit >> VI Properties >> Execution" and enable "Reentrant execution".
<<
I've tried this but only my second instance (I started simple with only 2 instances) seems to monitor its channel and pass data along to the queue. I've included my code below, I have two signal simulators which simulate singles coming in on channels 2 and 3. I'm using a PCQI 6602 counter/timer card.
Any help would be greatly appreciated, thanks in advance,
Chris
Attachments:
LabView App (June 28, 2005).zip ‏158 KB

good news! Your reentrant VI is working and all three instances are running (as execution highlighting clearly shows). The problem is going to be an error that is occuring but you don't see because you are ignoring the error clusters internally in the timer. It looks like at one point it was set to quit if an error occurred. That still needs to be there.
Always hookup error clusters...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Validation Event getting called multiple times

I am saving an eform after entering a wrong percentage in it.On opening the same eform it gives the validate message "Percentage not valid" pop up .This popup should come only once but its coming around 25-26 times.I checked and find that the validate event is getting called multiple times for the same field.Can someone tell why this is happening and how to resolve this

Hi rupali Sri,
Our forum here is for questions related to the LiveCycle Collaboration Service product.
You might want to post your question to the Livecycle Forms forum:
http://forums.adobe.com/community/livecycle/livecycle_es/forms_es
If that's not the correct forum, start from here:
http://forums.adobe.com/index.jspa?view=overview
Hope this helps.
Good luck,
Julien
LCCS Quality Engineering

Call and Execute Multiple Windows of the same VI

Hi,
I would like to call and execute multiple windows of the same VI.
Please take a look for my attached vi, and start from the 2x2.vi, i think you have to re-enter the file path to run (sorry for inconvenience).
If I click the start button in different sub panels, the sub vi(Temperature Analysis.vi..& etc) should be called out in multiple windows, hold it, and run simultaneously.
But now the problem is, the sub vi is called out 1 by 1 until it is finished prior the second sub vi is called.
May I know how to solve that?
Thanks.
Attachments:
My VI.zip ‏173 KB

Hello TanTan
1. Open the PopUpmain.vi and select the path of PopUp.vi
2. Enter the number of popups and run the VI.
Hope this attached VI will work as per your expection. Please select the less number of instances
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
PopUpMain.vi ‏12 KB
PopUp.vi ‏8 KB

Call outside function with same name in a package

I created a function as follows:
create or replace function f1 return number
is
begin
return 1;
end;
This f1 is to be called in a package created below.
Then I create a package with a function in it, as follows:
create or replace package pack1 as
function f1 return number;
end;
Now I define the package body as follows:
create or replace package body pack1 as
function f1 return number as
-- I am trying to call the first function f1 defined above here
How do I resolve the name issues here?
In other words, I want to call a function with the same signature outside a package.
Thanks for your kind help.

Hi,
Welcome to the forum!
Do you have a good reason for using the same name?
Refer to the stand-alone function with the owner name, even though it's your current schema.
That is, even if the package and the stand-alone function are owned by scott, in the package, say
x := scott.f1;

Multiple call of update function module

Hi Everybody,
I have made implementation to the definition MB_DOCUMENT_BADI( material Document creation).
While executing this BADI I am getting short dum with this error Multiple call of update function module.
Here is the short dump--
In the FORM routine Buchen_Ausfuehren (program SAPMM07M), an error
message was issued by a Business Add-In (BAdI) or function module.
This is not permitted, because it could lead to data
inconsistencies. For this reason, the update of the material
document was also terminated with a termination message (dump).
Note that this message (M7 372) is not the responsible error
message.
Please any body suggest the way forward.
Regards,
Sandeep.

Hi Kiran,
Thanks for the reply.
I have created one implementation to the BADI MB_DOCUMENT_BADI. This badi will hit while creation of material document.I have write the code in method MB_DOCUMENT_BEFORE_UPDATE such that it will act only for certain movement types specially for t-codeMb1a and MB31.
What problem I am facing i have used a error message "MB_DOCUMENT_BEFORE_UPDATE" in this method.If we got the erroe message then we dont need to post the material dcoument,but here problem is that if the material document could not posted then it corrupt the material and when we performing 261/101 we got error message like " Inconsistency between MM and ML for material and plant"
I have used following things like-
1-while updating the customized table using " Commit Work".
2-Call function vb_change_batch for updating the batch and not in update task.
3. Dequeue the table after updating the table.
Will thos things can create any inconsistency to the MM and ML.
Please suggest me uor thoughts.
Thanks
sandeep.
Thanks ,
sandeep.

Call Multiple RTF for same data model

How call two templates for the same data model.
what is the logic i have to use in the rtf template.
Thanks in Advance

Your RTF template will use the data model you defined.
So no logic than just inserting the xml elements your data model provides.
You can associate multiple templates to one data model. At runtime you will have the opportunity to select
the template of your desire to run the data against.
If you want this process to be automated then you will have to user bursting and for that you need to read this:
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e13881/T527073T555155.htm#T555156
Cheers
Jorge
p.s If this answers your question then please grant the points and close the thread

Forms hanging after multiple calls to Foreign Function Interface

Hi,
Can anyone help me with this problem. I'm getting a 'FRM-92100:
Your connection to the server was interrupted ... Details ...
Java Exception:java.io.EOFException' error message when i make
two calls to a c share object file using the ORA_FFI package.
Forms will hang with that error message when I call the foreign
function more than once and when the ORA_FFI.LOAD_LIBRARY
function is executed twice.
I've tried using the ORA_FFI.UNLOAD_LIBRARY function at the end
straight after the load library plus my processes and it still
hangs with that error message.
I've got a temporary work around which is not ideal but it
works. I've made another copy of the C shared object file and
renamed it and made my second call to load this library.
I would prefer to have one shared object file and make multiple
calls to it from forms. Any suggestions?
note : running forms 6.0 on three tier architecture with web
browser.

"Mush15" <[email protected]> wrote in
message
news:g7hela$flo$[email protected]..
> Ok the issue is a stack overflow caused by calling the
function
> recursivly.
>
> I have tried creating 2 functions and have each call the
other but still
> recieve a stack overflow.
>
> Any ideas help??
Try incrementing a counter every time you call the function
and decrementing
it on the way out. When you hit 2640 times, stop calling it.

Firefox making same GET call multiple times

Firefox is making the same AJAX call multiple times for a single event when it should really do it once. Actually, with each single click the number of calls multiplies. I have tested the application using Chromium and Eclipse's internal browser and I have no problems.
I removed all add-ons and started Firefox in safe-mode, but the problem persists.
Please advise,
Arthur Nobrega

Hi Arthur, do you have a page available that demonstrates this problem? If so, please post a link. Perhaps your test doesn't actually need to make a network request: for example, perhaps it could add a message to the page indicating that the relevant section of code was triggered.
Since this site focuses on end user support, you might also consider taking this question to a more developer-oriented forum such as the unofficial [http://forums.mozillazine.org/viewforum.php?f=25 mozillaZine Web Development board], or to StackExchange.

HT4528 i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

No. But thank for asking.

Calling multiple DB functions in same analysis throws Invalid Identifier

Similar Messages

Maybe you are looking for