Calling multiple paper types and duplexing

Hi all,
I'm being tasked to evaluate Live Cycle Designer as a development tool for batch printing of forms. We have multiple page forms that require multiple paper calls. I.E. page 1 on plain paper, page 2 on perf paper, pages 3 & 4 on double perf. Also, each page is printed duplex with information on the back. Can this be done in Live Cycle? I've found nothing in the help documentations or the forums except one other person asking about duplex - he was never answered, so I suspect the answer is Live Cycle can't do it. Any help would be appreciated!

We had the same question. The answer we received was that you can not set pages to automatically duplex. Duplexing requires manual intervention.
The reason we were given was that Adobe had to place certain restrictions on what we can set as defaults in order to prevent viruses being built into the forms.
I would love for this to be incorrect as we too would like to see this feature (and save a few trees in the process).

Similar Messages

Saving multiple file types and sizes

I design logos using Illustrator. After the design is approved I need to save it in multiple different file types and sizes. (ie. Jpg Hi, Med, Lo; tif; eps; pdf)
Does anyone know of a script that can do this?
Thanks,
Mark

I don't know of an existing script that does exactly this. You could make one though. Saving an Illustrator document to both 'eps' and 'pdf' formats is very straight forward once you know which options you want. Personally I would use Photoshop to create the required 'jpegs' Illustrator does not export to any given resolution only scaling at 72dpi… Open either the 'eps' or 'pdf' in Photoshop resize and save 3 times.

I can't get a proper connection to my Epson R1800 printer. I need to be able to choose Paper type and size. It keeps saying that the downloads are fine, but the System Library Extensions SMC1255TX.kext aren't working?

Dear sweet Apples, that know all the answers...
I can't get a proper connection to my Epson R1800 printer. I get the basics , but I need to be able to choose paper sizes and paper Types.
It keeps saying that the downloads went fine, but then it says that the System/Library/Extensions cannot be used because SMC1255TX.kext
isn't working. My downloads are useless as a result

Did you restart the printer?

List with Multiple Content Types and Making new Forms...

I go to create custom forms based on content types. After I create using the wizard in the list it always shows the same form no matter which content type I pick.
what am I doing wrong?
David Jenkins

You can change the custom form on content type through SharePoint Designer. Do not change it on the content type directly, when you add content type in a list/library, then open list's content types in SP Designer and then select your content type and modify
the URLs of your custom display form.
I have updated a document in gallery for
step by step development of custom workflow and custom task form. In this document you can find the association of custom form with content type using SP Designer.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

HT204135 I have two Epson printers and one Canon printer. Why am I unable to access the same print options on my MacBook Pro as I could on mp PC i.e. select paper type and print quality?

I have just purchased a MacBook Pro as my PC has finaly died.
I have three Inkjet printers i.e. Epson Photo PX700W Epson Photo R340 and a Canon Pixma ip4600 which I connected to my Mac and the print drivers were automatically downloaded. Now when I print using any of the printers the functionality PC i.e. Choice of paper and print quality settings. Is this all I get when using the Mac OS lion or should the functionality be on a par with Windows?

Depending on the application you are printing from, you may need to press the Show Details button in the print dialog to see all of the additional driver menus.
The image below is for the extended print dialog of TextEdit and for a Canon MP990 printer. The Show Details button is on the bottom of the print dialog and will change to Hide Details when selected. And with the menu changed to Quality & Media, you have paper options and print quality settings.

OSB call multiple Business Services and combine the responses into one

Dear All,
I am new to OSB and I have a use case that I need to solve. I have 3 web services and I imported their WSDLs into OSB and created 3 Business Services that goes with each WSDL. The scenario is like this.
Business Service 1: takes an input value as [Region] and returns a list of employee names.
Business Service 2: takes the list of employee names and returns the list of employee names with their job profile
Business Service 3: takes the list of employee names with their job profile and returns their contact information.
I need to return the result of Business Service 3 to the consumer. The consumer basically need to call the Proxy service with [Region] as the input value and the result should be the output of above Business service 3.
As I mentioned, I have WSDL for all the 3 Business Services, but, I do not have the WSDL for the Proxy Service. The Business Service WSDLs are all different and they do not match.
My question is it possible to achieve the above result without having a concrete WSDL for Proxy Service? Also, how can I go about solving this use case. I have gone through some articles that talk about Split-Join, and am really lost.
I really appreciate your kind reply on this.
Thanks in advance.
Regards,
Syama

You have multiple options:
1. Create a WSDL which has input similar to input of WS1 (only Region as input) and an output similar to output of WS3.
Create Proxy Service based on this WSDL. Then call all the thee business services one after the other and doing transformations/assigns as needed after each call. Finally map the result of BS3 to the similar output of your new WSDL on which the Proxy service is based.
2. Create an Any XML type of web service. Create a schema which has two elements, one for input and one for output. Input containing only Region and output containing all the details. All consumers need to send request according to input defined in schema and expect output defined in schema. Its similar to creating the WSDL but can be used in case your consumer do not want to call a Web Service but want to call an XML API over HTTP. Rest will be same as option 1.
Split join is needed to make calls in parallel, it wont be usable in your use case unless you expect a list og regions in the same request for each of which you need to gather same information by calling three services.

What's the proper workflow to combine multiple video types and turn them into one high quality DVD?

I'm trying to combine 1080i (29.97fps), 1080p (29.97fps), and 720p (24fps) video files into a single Premiere Pro project, and end up with a high quality DVD.
There are a few problems I can't solve:
1. There seems to be interlacing and clarity issues any time I export it to DVD dimensions (720x480), and on some TVs I'll get a bouncing motion on the 720p footage (slideshow). Yet everything seems to look perfect when I export it something like an HD MOV file.
2. If I use Final Cut X to make the DVD, I'll get audio popping and decent image quality. Yet if I use Encore, I'll get horrible interlacing, but good audio.
I don't have any training in video workflow let alone how to properly diagnose and solve problems that arise. So I need someone to lay out the proper workflow and settings from start to finish to get these three different types of footage to look great on a DVD using Premiere/Encore.
I've attached sample images showing the types of footage I'm using and the kind of problems I'm running into for reference.

By far the best way to get the quality of encoding is to use Compressor and not DVDSP. You can set Compressor up to do the AC3 (which DVDSP can't do). Alternatively, use a better encoder than Compressor, such as BitVice or MegaPEG.X... but remember that these do not do AC3 encoding.
Keep the encoded assets all in a single folder on your mac, then drag that folder into the DVDSP 'Assets' tab. This will import them all and keep them in the folder, which is a neater way of doing things. Select all of the clips within the folder (or simply select the folder itself) and drag them on to the track - they will go on in alphabetic or numeric order (whichever you have used as your names). If using numbers, remember to use '01', '02', etc otherwise clip ten, eleven, twelve and so on will follow clip one... clip two will come after clip 19.
Drop them all on a single track. You can then point a menu button at the track and all of the clips will play one after the other. If you want black in between then you will be better adding this in a NLE such as Final Cut, then exporting the entire sequence of clips as a single file. Alternatively, create a black .pict file the correct dimensions for the video format you are using and manually add it in between each clip on the timeline. Or, create a series of black .pict files and name them 011, 021, 031 and so on. Place them in your folder of clips with the MPEGs named 01, 02 and so on. When you select all and drop it onto your timeline within DVDSP a black clip will go in between each piece of footage (sequence will be 01, 011, 02, 021, 03, 031 ). This is probably the quickest way to do it. You can reuse the same black .pict files for every project like this and as long as you follow the same naming convention it will always work.
Like anything you want to automate, the first couple of times take longer to set up. After that it is a lot easier.

Multiple LAP types and VCI strings

Hello,
I'm installing a WLC with 1232AG & 1240AG access points and i would like to know if it's possible to configure 2 different VCI strings for the same DHCP scope, or should I have a scope for each LAP type with the corresponding VCI string?
Thanks for the help

Hi Friend,
You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.
HTH
Ankur
*Pls rate helpfull post

Multiple Payment Types in Sales Order Header Window without Prepayment

Hi,
I am trying to enter multiple payment types in Sales Order Header window. If I dont enable Prepayment, then its not allowing me to distribute payments across multiple payments.
Is there a way where I can enter multiple payment types in Payments Window of Sales Order-> Actions, and enter multiple payment types and distribute the amount.
While entering sales order, want to enter multiple payment types without enabling prepayment. If its not prepayment, its not allowing me to distribute the amount.
It will be really helpful if someone can reply urgently.

Hi,
Any help on this will be really appreciated.
I am not able to get any reply from Oracle SR Team as well.

Is it possible to have multiple page sizes and print types in the same pdf?

Is it really possible to have a pdf which has multiple pages and each of them have pages which are of different page sizes (e.g. letter, A4, A3) and print types (e.g. Simplex, Duplex)???
Thanks,
Phoenix

you can definately do different page sizes by using different master pages. You can set the paper type for each master page in the object>master page palette.

Oracle Object Type Constructor Called Multiple Times

I have an object type with a custom constructor. In SQL, when I reference the attributes the constructor is called multiple times in Oracle 11.2.0.4.
Why is the constructor called multiple times?
How do I stop it?
My current work around is to reference the attributes and use the /*+ materialize */ hint.
Problem Setup
    create or replace type Foo as object
      Bar1 NUMBER,
      Bar2 NUMBER,
      Bar3 NUMBER,
      CONSTRUCTOR FUNCTION Foo(p_Bar1 NUMBER, p_Bar2 NUMBER, p_Bar3 NUMBER)
        RETURN SELF AS RESULT
        DETERMINISTIC
    create or replace type body Foo is
      -- Member procedures and functions
      CONSTRUCTOR FUNCTION Foo(p_Bar1 NUMBER, p_Bar2 NUMBER, p_Bar3 NUMBER)
        RETURN SELF AS RESULT
        DETERMINISTIC
      AS
      BEGIN
        SELF.Bar1 := p_Bar1;
        SELF.Bar2 := p_Bar2;
        SELF.Bar3 := p_Bar3;
        dbms_output.put_line('Foo Constructor Called');
        RETURN;
      END;
    end;
Problem
    -- Constructor is called 6 times!
    -- Once for each column and once for each predicate in the where clause.
    SELECT x.f.bar1 AS bar1, x.f.bar2 AS bar2, x.f.bar3 AS bar3, f
    FROM (
      SELECT foo(p_Bar1 => 1, p_Bar2 => 2, p_Bar3 => 3) f
      FROM dual d
    ) x
    WHERE x.f.bar1 = x.f.bar1 AND x.f.bar2 = x.f.bar2
Output
Foo Constructor Called
Foo Constructor Called
Foo Constructor Called
Foo Constructor Called
Foo Constructor Called
Foo Constructor Called
Workaround
    -- Work Around
    -- Constructor is called 3 times
    -- Once for each column in the inline view.
    -- Note, I removed column f (the object type) because it's not compatible with the materialize hint.
    WITH y AS (
      SELECT /*+ materialize */ x.f.bar1 AS bar1, x.f.bar2 AS bar2, x.f.bar3 AS bar3
      FROM (
        SELECT foo(p_Bar1 => 1, p_Bar2 => 2, p_Bar3 => 3) f
        FROM dual d
      ) x
    SELECT y.bar1, y.bar2, y.bar3
    FROM y
    WHERE y.bar1 = y.bar1 AND y.bar2 = y.bar2

Another work-around is described in this thread... Accessing fields of a custom object type... which makes use of a collection type combined with the TABLE operator, like so...
create or replace type FooTable as table of Foo;
SELECT x.bar1 AS bar1, x.bar2 AS bar2, x.bar3 AS bar3, value(x) f
    FROM table(FooTable(
      foo(p_Bar1 => 1, p_Bar2 => 2, p_Bar3 => 3)
    )) x
    WHERE x.bar1 = x.bar1 AND x.bar2 = x.bar2
BAR1 BAR2 BAR2 F
1    2    3    (1, 2, 3)
Foo Constructor Called
Hope that helps...
Gerard

I have bought an Item from apple store Called "Scarry Tribes , 19,999 sale ! . from develober Called "XYRALITY GmbH" Type: In App Purchase , and no thing added to my Account in the Game !!?

I have bought an Item from apple store Called "Scarry Tribes , 19,999 sale !" . from develober Called "XYRALITY GmbH" Type: In App Purchase , and no thing added to my Account in the Game !!?
and if you cam Help Me I'll Copy the Invoice or Order number .. !

While I am no fan of Best Buy and would not buy a lightbulb from them I doubt you issues have anything to do with your iMac and more to do with your lack of experience and simply getting bad advice. Judging by you post I suspect you have loaded your computer down with a lot of crapware and that has caused it's problems. For example running antivirus apps on a Mac not only is a waste of time, it's a waste of money, system resources and will eventually create more problems that it solves. Please begin educating yourself on the subject by reading Thomas Reeds articles on the subject, Thomas is a frequent and knowledgeable contributor to these forums. You can find his webpage at http://www.reedcorner.net/tech-guides/
The good news is here are absolutely no, zero, zippo viruses for OS X. There are other types of malware available (for example trojans) however they differ greatly from viruses in that the use has to download and install them, whereas viruses do not work that way. OS X is not like MS Windows and is extremely secure.
My suggestion at this point would be to clean your computer of the crapware (including antivirus apps) however before doing so please download and install EtreCheck and post its report. Then we can see how your computer has been configured and begin to give you some advice on the next steps.

I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
Woody

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

Calling Oracle Stored proc with record type and table Type

I have a oracle SP which takes record type and table Type which are used for order management.
Is there anay way to populate parameters with these datatypes and call the stored procedure using ODP.NET?
Please help.
Thanks in advance

Hi,
ODP supports associative arrays and REF Cursors. There is no support for PLSQL table of records.
Jenny

How to select paper type for Canon iP5000 with Leopard and Photoshop CS3.

I have printed photographs quite happily for years on my iP5000 using PS7 and 10.X. However since installing Leopard and switching to PS CS3 I am unable to select paper type (glossy, matt, etc). Is this a 10.5 problem, or as I suspect a CS3 problem. Any suggestions would be appreciated.
I can select paper type in other applications.

I don't know if it is the same for your printer but with my Canon MP600 I experienced the same problem until I came across the fact that when Print is clicked there is a Blue Triangle on the right of the dialogue. Click this and the paper type etc is displayed.

Calling multiple paper types and duplexing

Similar Messages

Maybe you are looking for