Calling on the wdDoInit

Is there a way to be calling on the wdDoInit in the context controller from a linked view?

Hi kristoffer,
wdDoInit in ComponentController or in ViewController would be called only one time automatically by the WAS.
If you want to call some code which is used in wdDoInit then seperate them in another method and call them from wdDoInit and from another view as well.
wdThis.initialize();
From another view if you want to call this initialize method then you might do that like this.
wdThis.wdGet<herecomesyourcomponentname>().initialize();
Hope this helps.If you need more info please do elaborate your situation.
Also you are posting webDynpro related postings in Portal development.I would do that in webdynpro forums so that you get more specific answers from many experts in that Area.

Similar Messages

  • Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it som

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

  • How to secure a PL/SQL procedure that is called from the web browser

    If you have ever seen the sample document management application, and tried to download a file that was stored in the system, you are probably familiar with the apex_util.count_click URL that is used to download the file. If you copy that URL and paste it into a new browser, you will not be prompted to login to download the requested file. I'm using SSO with Apex as a partner application. How can I secure a pl/sql procedure like this to redirect to the login page before beginning the download?
    Thanks,
    Kris

    You can use the second method described here:
    http://apex.oracle.com/pls/otn/f?p=31517:15
    You would use an application process instead of pasting the procedure call in the browser. In the case I describe, you don't need to grant execute to public on the download procedure.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • Incoming calls bypass the general iphone lock

    Although I've set up the general lock on my IPhone 3G, incoming calls bypass the mechanism and make the phone accessible by anyone who picks it up. Is there a way to require a passcode for receiving calls....I want to block all access to my phone!
    Any help would be greatly appreciated.
    Message was edited by: chiroguy2pittsburgh

    You'll find that with the iPhone locked, an incoming call will not allow access to the phone, i.e. you can only answer and talk, not access the phone OS.

  • How do I make a hands free call with the iphone 4s?

    How do I make a hands free call with the iphone 4s?  I have a bluetooth car device and when I try to talk through it (as I did with my old phone) to call someone it does not work.  so far only hte last person called is redialed.

    That is a carrier-based service. So first you have to make sure your service contract includes that feature.
    It usually also includes Call Hold. So you call the first party, put them on hold, call the second, then reactivate the first. But only if your carrier allows you to.

  • The call was cancelled by the caller before the remote party answered

    Hi,
    We have a Lync 2010 Enterprise deployment in a single site with 2 FE and Mediation Server collocated.
    When dialling a number from a PSTN phone the call gets routed via our PBX/PBX Gateway/Mediation Server/FE Server to the desktop Lync client successfully.
    As soon as the user answers the call with the Lync client the call 'hangs' and terminates without hearing anything on either side.
    The snooper logs show:
    Error:
    SIP/2.0 487 Request Terminated
    Partial Content:
    User-Agent: UCCAPI/4.0.7577.4398 OC/4.0.7577.4398 (Microsoft Lync 2010)
    Ms-client-diagnostics: 52092;reason="The call was cancelled by the caller before the remote party answered"
    Content-Length: 0
    Please help?
    Vinkie

    What kind of gateway are you using to connect to your PBX and how?  What is your media set to?  G.711 μ-law or a-law?  I'd check media settings there as a starting point. 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".

  • How do I block messages and calls on the iPhone 5?

    Hey people, how do I block irritating message and calls on the iPhone?

    I'm having the same issue. It had the feature before and worked beautifully, and now when I try I do the same pinching/stretching method and nothing happens. I don't have an option to zoom anywhere in photo or video.

  • Facetime call using the same APpLe Id on iPad and Mac

    The FaceTime call using the same apple ID with the new iPad and iMac cannot put through to myself. In this case I do not want to get a new apple ID for FaceTime what can I do? I want to use the current apple Id.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
     Cheers, Tom

  • How can I listen to music from iphone 4s via apple tv whilst doing a phone call at the same time?

    How can I listen to music from iphone 4s via apple tv while doing a phone call at the same time?
    When I take a call on the iphone, iphone stops streaming the music to apple tv until I finished the call.
    thx!
    Claus
    PS: did ask the same question to apple hotline in germany. Answer: we don´t know... funny

    Welcome to the Apple Community.
    As far as I know you can't, which sort of makes sense, it seems logical to pause whatever you are doing while you take a phone call, which after all is the primary function of a phone.

  • IPhone 3G S has dropped over 83 calls in the last day. 3G is the culprit.

    It started yesterday (Oct 3rd, 2009) as a nuisance, but it grew to make my phone not useable.
    The symptoms where:
    iPhone has full bars and the 3G indicator is active.
    1: Dial a call phone waits longer than usual to dial, but gets the call through.
    2: user on the other line picks up long enough to say hello, and the phone does its hated beep,beep,beep after 3 seconds!
    3: cannot receive calls.
    4: try the internet or mail, and you get the connection error. (Obviously we have a network error here!)
    I called 1800 my iphone , and the tech basically told me to do what I had done repeatedly for 5-6 hours.
    1: shut the phone down and re-start. (No kidding, I didn't think of that!) +Did not work+...
    2: hold the power and home button until the phone restarts. +Did not work+
    3: go to settings> general> reset>reset network settings. +Did not work+
    4: go to settings> general> reset>reset all settings. +Did not work+
    5: remove the sim card and re-insert into phone. +Did not work+
    The tech tells me to bring the phone to the Apple Store. Of course there's not an a appointment available for 2 days. (thank god for Skype, even though you need Wi-Fi for it to work, it works!)
    The tech blames my software on my phone, and says that I should restore the phone to factory settings.
    Next, I decide to go a little deeper... Since my phone will not work for the next two days, I decided to do the : settings> general> reset> ERASE ALL CONTENT AND SETTINGS. (You still have your last back-up, but once you start you're in for at least and hours worth of restoration. )
    After the phone restarts from its complete erase, and comes back up as a "new" phone I simply connect it to my laptop just to reactivate it... I re-activate the phone as a "new" phone. (This means theres not one piece of third party software on the phone. This also means the phone doesnt have any settings other than factory setting.
    Confident I call my wife again... "Hi honey lets try this again...beep, beep, beep!!!"
    I just wasted another hour of my life!!!!
    Finished with apple tech support, I call AT&T tech support. I got straight to a customer service rep. She seems competent enough... She asks me whats happening, I tell her. She suggests the following:
    1: Dial #002# and press the call button. The wheel spins for a second, and then you get a screen with a bunch of error messages... She says to ignore all the messages and shut the phone down.
    2: I shut the phone down and wait 2 minutes.
    3: I re-start the phone.
    4: she has me repeat step one again.
    5: I call my wife. I talk to my wife for 35 seconds. Confident that this has worked I hang up with her, and decide to call again. the next cal I get beep, beep ,beep!!
    Ok so I'm in full tech mode now. So I decide to go "old school" and turn 3G off... (Which I should have done way earlier in the game, but I decided to give AT&T the benefit of the doubt. My mistake!!!)
    I go to settings> general> network, and turn the 3G slider to the "OFF" position. (Yep we're back to "E", not empty, but the EDGE network, which is close to empty!!!!) suddenly my phone begins to go on the internet. I start getting the beloved ding (incoming email messages, and voice mails) Hooray for me! Two multi-billion dollar companies couldn't get my phone to work, but I am at least able to get it to work in part, all with my own troubleshooting. +THIS WORKED!!!+ but now I'm on a much slower network. So I guess I can call it the iPhone "E S".
    Although apple has amazing products, they have a mayor flaw. They're freaking stubborn! Here's probably the greatest handheld device out there, but they have bogged it down by putting it on probably the most unreliable network in the US. I've gotten better service in Cancun while roaming... Seriously!
    Just like refusing to have a two button mouse for years, until demand and constant barraging from customers made them add the feature. ( and even then its not a true second "button" on laptops ) I think they are going to do the same thing with the AT&T only thing.
    Apple, you're a bunch of smart, but stubborn people!

    After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
    I continued to use the phone on EDGE mode for two more days until the problem was fixed.
    I even got a call back from a tech support guy asking me if my phone was working properly....
    I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

  • I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

    I've found two bugs in iOS 7:
    1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
    2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

    We are all users here, just like you, but you can tell Apple about it by using this link:
    Apple - iPhone - Feedback

  • How do i stop notifications from ringing while im on a phone call on the iphone 4s

    how do i stop notifications from ringing while im on a phone call on the iphone 4s?

    Basel,
    I'm not sure why these folks are having trouble understanding your request. I will dumb it down for them. Is there an option to have the iPhone only provide me with notifications when I'm not on the phone. Having my $800ish phone buzz and interrupt my phone conversation (after all primary function of this iPhone is being a phone) to let me know one of my Facebook friends has challenged me to a game of words with friends. I don't want my iPhone to not notify me at all. It can notify me after the call (again primary function) is complete. Going through menus and turning off notifications all together is absolutely silly. I wouldn't want to have to navigate through the menus and turn them off and then on an then off just to make or receive a phone call. Could you imagine answering you phone with, "hey, just wait I have to turn my notifications off so I can have this conversation." every time you wanted to talk on the phone.
    So yeah. Again not sure why they were having trouble with understanding you. I hope this helps clarify it for them.
    Randy
    Ex Apple tier two support agent.

  • Error 1172, an error running a VI in the second time call of the DLL

    Hello All,
    I am a beginner in labVIEW.
    I have to write a test program in labVIEW which uses a DLL created by other programmer.
    I called the DLL from my labVIEW to control DIOs, a serial port, communicate with a slave device, perfrom a flashing task.
    While testing the program, I found that the program is OK if I use it just once, however, if I want to run it coninuously using a Do-While Loop, it failed with
    Error 1172.
    As far as I could understand, it seems that the DLL creates a log file in C:\ while it was called for the first time, and the process does not stop taking control of this log file even after the DLL is closed.
    Then when the DLL is called for the second time, it looks for the same log file to write new info but as it was taken control by the previous process, there comes an error.
    Please find the attached files.
    Hope there would be somebody who is able to help me to point out my mistakes in my vi or suggest me a solution for it.
    Thanks and Best Regards
    Aung
    (As the system does not accept the DLL attachment, I changed the extension to .pdf for the DLL File)
    Solved!
    Go to Solution.
    Attachments:
    I Basic Flasher.vi ‏60 KB
    Failure.xls ‏86 KB

    -message deleted -
    Message Edited by Ray.R on 11-17-2009 08:01 PM

  • AcquireConnection method call to the connection manager Excel connection Manager failed

    I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
    successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
    SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
    call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
    From the time I created the original package (when it worked fine) until now:
     1) I have been using the same computer, the same login account and the same permissions.
     2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
     3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
     4) I can independently open the target Excel file and the template Excel files with no errors.
     6) The ConnectionString has not changed. The Connnection String I am using is
      Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
     7) Run64BitRuntime is set to False.
    8)  Delay Validation is set to true
    9) This is not running under a SQL job  
    10) There are no child packages being run
    I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
    "Test connection failed because of an error in initializing provider. Unspecified error."
    Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
    I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
    Does anyone have any suggestions for me?

    Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
    package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package.  A summay:
    Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
    Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
    Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
    Package #1 and #2 are in the same project, but Package #3 is in a separate project .
    I will try replacing the Excel files with new ones for Package 1 and 2.

Maybe you are looking for