Calling Results from Other Forms

i have data on one form and want to display it on another. basically i want to transfer the int value in form 'a' on a label to a label in form 'b
the forms are calles Main, whcih is where the original value is and Print where the label that wants the value is.
the label is called jlabel1 on the main page with the value and the other label is jlabel2 where i want the value to go.. i have a variable in place called result to save this value
upto now i have something like;
Main.jLabel1.getText(result);
Print.Label2.setText(result);am i going anywhere with this??
thanks

phil028 wrote:
i have data on one form and want to display it on another. basically i want to transfer the int value in form 'a' on a label to a label in form 'bDon't think in terms of forms, think in terms of classes. How would you get information from one class to another? Often I use getters and setters. Sometimes I use observer pattern where appropriate.
upto now i have something like;
Main.jLabel1.getText(result);
Print.Label2.setText(result);
What happens when you try to run this? Any problem with the getText(result) method call?
But again, how about having accessors in the one form that has the information?

Similar Messages

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Calling Report From Oracle Forms

Hi
I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that temporary table. The problem is, we can not view the data of an other session if we are using temporary table. When i call report from that form a new session get created due to which i can not see the data. Is there any method of calling report from oracle form that a same session is used to run the report?
Thanks.

As you mention Forms and Reports do not share the database session. I had the same problem and resolved it using record groups and DATA_PARAMETER to transfer data from Forms to Reports. You could also read the Note 110495.1 on Metalink to find useful information regarding this issue.
Adi

Calling reports from oracle forms 9i

Hi
I succeded to call reports from oracle forms but for I have a problem for only one report so I can't call it. this a part of the code I'm using :
declare
     pl_id2 ParamList;
     pl_name2 VARCHAR2(30) := 'liste2';
v_rep VARCHAR2(100);
     rep_status VARCHAR2(20);
begin
pl_id2 := get_parameter_list(pl_name2);
if (Id_Null(pl_id2) )THEN
pl_id2 := Create_Parameter_List(pl_name2);
IF NOT Id_Null(pl_id2) THEN
     add_parameter(pl_id2,'mois',TEXT_PARAMETER,:mois);
END IF;
end if;
IF NOT Id_Null(pl_id2) THEN
if(:mois is not null) then
v_rep := RUN_REPORT_OBJECT('My_report',pl_id2);
message(v_rep);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
message('Error when running report');
END IF;
end;
the problem I've remarqued is that the function message(v_rep) is always returning the value :'repserver_0'.
so when I execute the previous code I'm getting the 2 messages : 'repserver_0' and 'Error when running report'.
Rq: the report my_report is running very well in report builder.
does someone see where is the problem so can help me??
thanx.

Hi,
This usually happens when the report fails on the report server. To obtain details on why a particular report has failed, use the showjobs page :
http://server.domain:PORT/reports/rwservlet/showjobs?server=repserver
and check the detailed error occured.
This is logged as Bug:3017948. It is marked to be fixed in version 9.0.4 (Reports 10g) and also has one-off patches for version 9.0.2.3 on Windows platforms. If you need further assistance about patches, please raise a Service Request (SR) with Support via Metalink (http://metalink.oracle.com).
Regards,
-Bulent

Calling url from a form - err using ".value" method

I'm trying to call url from a form, which seems to be the subject of many of these Posts.
I have a form with a combo box/LOV and a button. The LOV will read a url into the combo box from a table of url's.
I used the following code in the "OnClick" Java Script Event Handler section, which I pieced together from other posts in this and other forums. (i.e. I'm a pl/sql programmer trying to use Java Scripts for the first time).
OnClick
var X = FORM_DRWING.DEFAULT.A_DRILLDOWN_PATH.value;
run_form(x);
When I attempt to run this form from the "manage" window, I get a run time error "FORM_DRWING is undefined" upon clicking the button. FORM_DRWING "IS" the name of the form!
The runform() function in the "before displying form" pl/sql code section is
htp.p('<script language="JavaScript1.3">
< !--
function runForm(v_link)
window.open(V_LINK);
//-->
</script>');
This code was from yet another Post.
Any help would be appreciated.
Thanks, Larry
null

Hi Larry,
the problem could be that you need to preface your form with 'document.'.
i.e.
var X = document.FORM_DRWING.DEFAULT.A_DRILLDOWN_PATH.value;
Regards Michael

Alternative for result from other query and merge dimension option option

Hi Everyone ,
Am Developing one webi report over bex Query.
Actual scenario is output of one webi report should be the input of other webi report.
Eg:
Table 1
2010        Cus 1
2010        Cus 2
2011        Cus 3
table 2
cus1    m1   100
cus2    m2   200
Cus3    m1 400
Report 1 designing
First report created using table 1 and prompt for year
Report 2 designing
Second report created using table2 and prompt for customer
So when am Running first report it will ask for parameter year and if am selecting 2010 then the report will return C1 and C2
this out put should e the input for report 2.
So out put will be 100+200=300
NOTE:1. Result from other query is not working in webi filter pane since am building on olap universe.
           2. Merge Dimension performance is very slow .
Any Solution ?
Regards,
Kannan.B

Hi,
Thanks for ur reply
As you said , If am giving hyperlink to other report .
Eg: User selected Tamilnadu then report 1 opened then he has to click the some cell or hyperlink cell to view the actual report(2nd report).
Suppose user Clicked that hyperlink cell and 2nd report opened and he is viewing the data for Tamil nadu and he decided to see the report for
Andrapradesh so according to this logic he has to select first report and refresh the data for Andra and from there he has to come to 2nd report.
totally 4 screen will be opened for seeing the two states report.
So Some other alternative.......

Calling EJB from other EJB on other J2EE Server

Can I call EJB from other EJB on other J2EE Server
Servers - Websphere 5.0
Do i require home & remote interface of that ejb on client side also
Help me, please

the problem is actually i require that is specific to websphere
for example i want to call a method ion that ejb
say my ejb name is myejb
so the normal way i should call is
InitialContext initialContext = new InitialContext();
Object homeObject = initialContext.lookup("ejb/MyEjbHome");
MyEJBHome myEJBHome =(MYEjbHome )javax.rmi.PortableRemoteObject.narrow(homeObjectMYEjbHome.class);
myEJB = lSHome.create();
myEJB.someMethod();
but here i am having class for home and remote available
now if other app server i am not having this classes then what to do

Calling Report from a Form

Hi All,
I tried to call a report from a form (using this form as a parameter form)but unfortunately it is not working out for me. I used the run_product built in.
Could someone examine my code and tell me what is wrong?
DECLARE
pl_id ParamList;
BEGIN
pl_id := Get_Parameter_List('OPEN');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('OPEN');
Add_Parameter(pl_id,'P_BUNIT',TEXT_PARAMETER, :BLOCK3.BUNIT);
Add_Parameter(pl_id,'P_AGRMT',TEXT_PARAMETER,:BLOCK3.AGRMT);
add_parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'SCREEN');
add_parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
run_product(REPORTS, 'APRIL11', SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id, NULL);
END;
null

Olan,
Your code looks good, and it should work.
Maybe you should check your report to make sure it is under oralce report path, user-defined parameters in the report are same name, type,lengh as in the form parameters, and correct system parameters.
good luck.
Jingning

Calling report from a form/report

Hello all,
My Apex version 3.2.1
I have created an application on some tables. Each table has a report and form page. Now everything in these pages is working fine(inserting, updating, deleting records).
I have a situation here, where after I insert a new record in to a table from the form page, here I have to show a report page based on a SQL query which queries the records from another table and the current table passing the parameters. Parameters should be the values that I enter during inserting a record.
Can I do this from form or report? If yes, how?
Please help me...

I think you could create an unconditional branch after submit that would go to the report page that calls the said report.
Process flow:
insert row in TABLE_A
click update - adds row into table
submits page
processes validations, computations, etc
branches to report page
report page pulls data from TABLE_A (new row is inserted)
You could have a separate branch on each form to accomplish this.
Hope that helps
Paul

Calling report from a form with user input parameters

Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?

Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM

FRM-41213 When calling report from a form using RUN_REPORT_OBJECT

Hi,
I get an error frm-41214:unable to connect to the report server when i am trying to call a report from a form using RUN_REPORT_OBJECT.
My code is as follows:
I have created a simple report using employee table such tht when i give the department number as parameter it should get the corresponding details along with that i also have highlited the system parameters:
DESFORMAT
DESNAME
DESTYPE
also other user parameters as
p_action
p_servername
p_user_connect
and in the before parameter form trigger the following code:
function BeforePForm return boolean is
vc_parameter_form VARCHAR2(4000);
vc_hidden_runtime_values VARCHAR2(1000);
vc_report_name VARCHAR2(100);
begin
IF (:P_ACTION = '_action_') THEN
     vc_hidden_runtime_values := '_hidden_';
ELSE
     srw.get_report_name(vc_report_name);
          vc_hidden_runtime_values:='report='||vc_report_name||'&destype='||:destype||'&desformat='
||:desformat||'&userid='||:p_user_connect||'&server='||:p_servername;
END IF;
vc_parameter_form:='<html><body bgcolor="#ffffff"><form method=post action="'
||:P_ACTION||'">'||'<input name="hidden_run_parameters" type=hidden value="'
||vc_hidden_runtime_values||'">'||'<center><p><table border=0 cellspacing=0 cellpadding=0><tr><td>'
||'<input type=submit></td><td width=15><td><input type=reset></td>'||'</tr></table><p><hr><p>';
                    srw.set_before_form_html(srw.text_escape,vc_parameter_form);
return (TRUE);
end;
After this i created a form with department table as my datablock:
I created a report object in the form with name REPORT6.
-Created a procedure in the form with the following code
PROCEDURE RUN_REPORT_OBJECT_PROC(report_id REPORT_OBJECT,reportserver VARCHAR2,runformat VARCHAR2) IS
report_message VARCHAR2(100);
rep_status VARCHAR2(100);
vc_user_name VARCHAR2(100);
vc_user_password VARCHAR2(100);
vc_user_connect VARCHAR2(100);
vc_connect VARCHAR2(300);
BEGIN
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,runformat);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,reportserver);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'p_deptno='
||:Dept.Deptno
||' paramform=yes P_USER_CONNECT='
||vc_connect||' P_SERVERNAME='||reportserver
||' P_ACTION=http://iitv-1:8888/reports/rwservlet?');
report_message:=run_report_object(report_id);
rep_status := report_object_status(report_message);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := report_object_status(report_message);
END LOOP /* Wait for Report to be finished */;
IF rep_status='FINISHED' then
web.show_document('http://iitv-1:8888/reports/rwservlet/getjobid'||
substr(report_message,instr(report_message,'_',-1)+1)||'?server'
||reportserver,'_blank');
ELSE
message (rep_status||' Report output aborted');
END IF;
END;
I created a press button and in the when_button_pressed trigger i added the following code:
declare
     repid REPORT_OBJECT;
     repserver VARCHAR2(100);
     runformat VARCHAR2(10);
BEGIN
     repid := find_report_object('REPORT6');
     repserver := 'rep_iitv-1';
     runformat := 'HTML';
     run_report_object_proc(repid,repserver,runformat);
     END;
Then tried to run the form but i got this error frm-41213 unable to connect to the report server.
Any one please help me.

Run_report_object can't work with forms9i
Regards
Vikas Singhal

Problem calling WebService from Oracle Forms created by JDeveloper

Hi All,
I am trying to call a Webservice from Oracle Form using JAVA Class created by Oracle JDeveloper.
The Java Function (in JDeveloper) is as follows:
public Vector GetPIValue(String TagName, String ReadingTime) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
requestBodyEntries.addElement(TagName);
requestBodyEntries.addElement(ReadingTime);
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.send(endpointURL, "http://tempuri.org/GetPIValue", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
return responseBody.getBodyEntries();
When this Class is Imported into Oracle Forms the Function is converted into the following PL/SQL code:
FUNCTION GetPIValue(
obj ORA_JAVA.JOBJECT,
a0 VARCHAR2,
a1 VARCHAR2) RETURN ORA_JAVA.JOBJECT IS
BEGIN
Message('param passed: '||a0||' - '||a1);
cls := JNI.GET_CLASS('oracle/forms/demos/webservice/ConnectToPIStub');
mid := JNI.GET_METHOD(FALSE, cls, 'GetPIValue', '(Ljava/lang/String;Ljava/lang/String;)Ljava/util/Vector;');
args := JNI.CREATE_ARG_LIST(2);
JNI.ADD_STRING_ARG(args, a0);
JNI.ADD_STRING_ARG(args, a1);
Message('I am Here');
RETURN JNI.CALL_OBJECT_METHOD(obj, mid, args);
END;
When I am calling this Function from Within Forms and Passing into it the Parameters, I am displaying some Debugging Messages. When the Code reaches "JNI.CALL_OBJECT_METHOD" there is NO RESPONSE from the Webservice and nothing is moving forward after this Point...
A similar Webservice that can be Tested is:
http://www.webservicex.com/CurrencyConvertor.asmx
with WSDL file:
http://www.webservicex.com/CurrencyConvertor.asmx?wsdl
Kindly note that this Webservice is running properly from the Web Browser but the call from Oracle Forms is not Succeeding!!!! :-((
Any help is much appreciated.
Regards,
Baz

Hi,
Yes, you need to compile your source files with JDK 1.3 (since JInit 1.3.x.x uses JDK 1.3).
Other solution would be to use JRE 1.5 (instead of JInitiator).
Check out [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=550563] on how to use JRE1.5
-Arun

Call APEX from Oracle*Forms

My first APEX
I have "built" a APEX-Application to upload and download documents (APEX advanced tutorial).
It works as a stand-alone-solution.
Now I want to call this APEX-Form from Oracle*Forms (web.show_document(url))
I found that I can call a specific Apex-Page by application-id and page-Number.
But APEX still asks for Username/ Password. And I want to transfer some other parameters to apex.
The url I could hide. I also think about encryption/ time-stamp mechanism.
I think there should be a standard-mechanism.
But now I am in doubt: Is this possible at all?

hi Scott.
i actually developed a javabean to communicate with a mikrotik router and it works very nice on Oracle forms 10g !
but i need to develop an mobile interface for users , so i am using apex to accomplish this task, but i will need to call the javabean from apex.
thanks

Calling Transaction from other system using RFC

Hi ,
I have one button on screen(say Screen-A), in ECC. when its pressed the transaction '/SAPAPO/BOPIN' gets called from APO.
For calling transaction from APO I am using FM - 'ABAP4_CALL_TRANSACTION'.
I want the initial screen of that transaction to retain some values which I fill on the Screen-A(the screen which has that button).
When I call the transaction from ECC itself (ex. C006), the initial screen of C006 retains the value on Screen-A.
I want the same to happen in case of calling transaction from APO.
How to achieve this? Would it need the changes in IMG (SPRO)?
Please note that, Screen-A is initial screen of transaction 'md05' and I want to retain vaules of Material, MRP Area, Plant.
Thanks,
Sujeet

Builld a RFC enabled FM () that wrap the call of Smartforms (*) in the other system.
Regards,
Raymond
(*) [Writing Remote Function Modules in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
(**) [Integrating the Smart Form into the Application|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm]

Invalid ID calling report from oracle forms 10 G

Hi, I have a problem during calling a report object 10g from a FORM, the source code is below the message, an the error message is can't not find PLAN_FUZZY (my report module name)...... WHY ???
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     Rep_status VARCHAR2(20);
BEGIN
     repid := FIND_REPORT_OBJECT('PLAN_FUZZY');
     V_rep := RUN_REPORT_OBJECT(repid);
END;

hey,
May i know have u attached the report to your form???
i think the best way is using RUN_OBJECT method
Run_Product(REPORTS, 'report_path', SYNCHRONOUS, RUNTIME,
FILESYSTEM, NULL, NULL);
if your report is at reportxx folder then you can just write report file name.
Hope it will help you.

Calling Results from Other Forms

Similar Messages

Maybe you are looking for