Calling RRMMX report from R3 (ECC6).

Calling RRMMX report from R3 (ECC6).
Hello,
I have created an RFC in BW to run a report RRMX, called from R3 (ECC6).
If I run the function from BW is ok.
If I do it from R3, Excel opens but does not load the workbook.
Thanks and regards.

Last time I checked report to report interfaces was web based, and and RRMX won't work.
John Hawk

Similar Messages

  • **How to call a report from a form by passing a specfic value?????

    Hi Expert,
    I want to call a report from a form.My problem scenario like, a user is login to his account and there is a option called ADMIT CARD(Push Button).Now when he pressed the button a report will generate.I want that when he pressed the button the user id of the user will passed to the report and the report will generate corresponding to his details which was stored in the database.This scenario is like any online admit card.
    Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
    Thanks,
    TAPAN
    Message was edited by:
    user630863

    Thanks for replying.
    Actually I am a beginner.I think that I have to use RUN_REPORT_OBJECT built-in.But I cannot understand the parameterlist.Can u plz give me any example or code then I am very thankful.
    Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
    Thanks,
    TAPAN

  • Calling a report from a form based on procedure

    I created a form based on a procedure.
    It is a entry form where the user is selecting or enters data then on submit I must display the report based on selected data.
    I know I can simply create a report with all bind variable and do the job.
    My question is what is the syntax to call the report from the procedure for the selected parameters values.
    Thanks
    Lawrence

    If you want to display other HTML page after successful submission, you need to use
    either go or call method.
    I created a form on SCOTT.EMP and a report on SCOTT.EMP and the report accept a parameter for
    the deptno. Here is my on successfull submission code:
    declare
    l_dept number;
    l_url varchar2(2000);
    begin
    l_dept := p_session.get_value_as_number('DEFAULT', 'A_DEPTNO', 1);
    l_url := 'scott.rpt_mask_1.show?p_arg_names=emp.deptno&p_arg_values='| |l_dept;
    go(l_url);
    end;
    null

  • How to call a report from a web application

    Hi,
    I have a web server in wich is installed Reports 6i. My question is how can I call reports 6i to generate a pdf using a .rep file from my web application (built with java)?

    Hi,
    The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
    http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
    Thanks & Rgds,
    M T

  • Call Oracle Reports from  Forms ver 9i or 10g

    Hi,
    Can somebody guide me, how to call Oracle Reports from the Oracle form 9i,
    Run_product is no more available into 9i & 10g, Run_report_object is not working with out put type "Screen" or "preview".
    What is the best way to call the reports from the form ??? pls help...
    Thanks in avdance.
    Jitesh ([email protected])

    You can use RUN_REPORT_OBJECT with CACHE type, and WEB.SHOW_DOCUMENT to view the document on the screen.
    In the Forms help you should find examples.
    If you have access to Metalink, have a look at Note:207396.1.

  • How to call a report from a menu ?

    I am converting 6i client/server forms to 9i.
    I have a menu that has an option on it to run a report for each menu item selected using RUN_PRODUCT.
    9i is making this obsolete, so how can I call a report from a menu (not a form) now then ?
    In a form it is fine cos I just use the Report Object - a menu does not have this facility.
    Thanks in advance.

    Hi,
    so here is how this should be done:
    1. Create a Reports node in the Forms module that uses the menu (you don't have to create one Reports Object for each report that you want to run)
    2. From the menu, before calling Run_Report_Object() use Set_Report_Object_Property() to set the phsical file name of the Reports that should be executed. This is kind of best practice and does not have a performance hit.
    There is a bug filed against Forms to extend the menu files with a reports Object node. This could require a change to teh file structure which is why we looking for Forms 10i to implement this. (If it turns out that we can have it without recompiling the menu modules then it may go into a patch set - however this seems unlikely from my point of view)
    Fran

  • Calling a report from Form 6i

    Hi,
    I want to call a report from Form 6i at run time. And I write the following code in When Buttton Press trigger . when I press the button it will gives no response.
    declare
         x report_object;
         y varchar2(100);
    begin
         x:=find_report_object('billform');
         y:=run_report_object(x);
    end;
    for more information , path of my report is: C:\REP\billform.rdf
    please send me the solution of this problem
    E_mail: [email protected]
    Shahzad

    hi,
    now i am using the following code in when button press trigger. if u give me ur e_mail address i will send u FMB and RDF files used for Scott/tiger EMP table for the sample.
    declare
    repo_Para     ParamList;
    BEGIN
    repo_Para:=Get_Parameter_List('Report_para');
    IF not Id_null(repo_Para) THEN
         destroy_parameter_list(repo_para);
    end if;
    repo_Para:=Create_Parameter_List('Report_para');
    Add_Parameter(Repo_para,'PARAMFORM',TEXT_PARAMETER,'No');
    Add_Parameter(Repo_para,'MAXIMIZE',TEXT_PARAMETER,'Yes');
         Add_Parameter(Repo_para,'BDATE',TEXT_PARAMETER,:BLOCK3.a_dptno);
         Add_Parameter(Repo_para,'EDATE',TEXT_PARAMETER,:BLOCK3.b_dptno);
         RUN_PRODUCT(REPORTS,'c:\apu\DDATE.rep', SYNCHRONOUS,
              runtime, FILESYSTEM,Repo_para,NULL);
    end;
    BDATE & EDATE are two user parameters created in report.
    when i press the button in form pass parameters the report will be called but no data will be display but when i directly run reprot from report buider and pass same values of BDATE & EDATE it will show data.
    please give me ur e mail address or help me for this problem
    best regards,
    shahzad

  • Calling a Report from a Form

    I have uploaded my form to the app server and compiled to Linux. I have copied my RDF file to the reports_path/demo directory. I can run the report via a link from our portal using the URL as follows:
    /reports/rwservlet?report=IndRpt.rdf&desformat=pdf&destype=cache&userid=' target="_blank"
    That opens the report in a separate window, which is what we want. So far, so good.
    I can run the form via a link from our portal as well using the URL as follows:
    /forms/frmservlet?config=bsc_ind
    The config section hides all the form parameters very nicely.
    In the portal, I created a Report Server Access portlet, REP_OMHAST2_MIDTIER, and use the following set_report_object calls in my form:
    repid := find_report_object('IndRep');
    SET_REPORT_OBJECT_PROPERTYrepid,REPORT_EXECUTION_MODE,BATCH);
    SET_REPORT_OBJECT_PROPERTYrepid,REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
    SET_REPORT_OBJECT_PROPERTYrepid,REPORT_SERVER,'rep_omhast2_midtier');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,ls_param);
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    IF rep_status = 'FINISHED' THEN
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://omhast2.omh.state.ny.us:7777/reports/rwservlet/getjobid'||
    substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_omhast2_midtier ','_blank');
    All that comes right out of the white paper.
    Now here's the weird part, I have never seen this before. When I click my "Show Report" button in my form, the report seems to be running, but then I get a very strange dark grey, square icon superimposed over my mouse pointer. The icon has a small yellow "starburst" pattern with a tiny red exclamation point inside. The report does not appear on screen.
    Incidentally, all of this works correctly when I run the same scenario on my workstation using the call to rwserver as: rwserver server=rep_omhast2_midtier. But when we port it to the app server, it does not run. I think it has to be in the way the form calls the report because the report will run as a stand-alone object.
    Anything apparent to anyone out there?

    Well, it looks like I stumped the band. And with good reason. Sorry for the error. The problem was that the user running the form and the report had a pop-up blocker that was blocking the report. The form and the report ran from another machine. I allowed pop-ups from the report's URL and that enabled the report to appear.
    So, here we have another example of how to call a report from a form. Again, I am sorry for any angst this may have caused.

  • CALLING A REPORT FROM FORMS (PROBLEM)

    MY PROBLEM IS THE NEXT:
    I CREATED A MASTER-DETAIL REPORT CALLING 'ASUNTOS'WITH THE NEXT QUERY:
    SELECT ABOGADOS.APELLIDO_P,ABOGADOS.APELLIDO_M,ABOGADOS.NOMBRES,
    ASUNTOS.EXP_INT,ASUNTOS.MATERIA,ASUNTOS.GERENCIA,
    ASUNTOS.EMPRESA,ASUNTOS.RECLAMA,ASUNTOS.PESOS,
    ASUNTOS.DOLARES
    FROM ABOGADOS,ASUNTOS
    WHERE ABOGADOS.FICHA = ASUNTOS.F_ABOG
    AND ASUNTOS.F_ABOG = :ABOGADO ;
    -- ABOGADO = PARAMETER.
    THIS REPORT WORKS FINE THE PROBLEM IS WHEN I TRY CALL THIS REPORT FROM FORM I'VE USE A BUTTON(WHEN_BUTTON_PRESSED) WITH THE NEXT CODE:
    DECLARE
    LISTA PARAMLIST := GET_PARAMETER_LIST('ABOG');
    BEGIN
    IF ID_NULL(LISTA) THEN
    LISTA := CREATE_PARAMETER_LIST('ABOG');
    ADD_PARAMETER(LISTA,'DESTYPE',TEXT_PARAMETER,'PRINTER');
    ADD_PARAMETER(LISTA,'DESNAME',TEXT_PARAMETER,'LPT2');
    ADD_PARAMETER(LISTA,'ABOGADO',TEXT_PARAMETER,TO_CHAR(:ASUNTOS.F_ABOG));
    -- ADD_PARAMETER(LISTA,'PARAMFORM',TEXT_PARAMETER,'YES');
    END IF;
    RUN_PRODUCT(REPORTS,'ASUNTOS',SYNCHRONOUS,RUNTIME,FILESYSTEM,LISTA,NULL);
    END;
    BUT THE REPORT NOTHING DISPLAY.
    THERE ARE SOMETHING WRONG WITH THE CODE IN THE BUTTON

    Roberto,
    Does your report work when it is not called from Forms?
    try the following:
    [TOOLS_HOME]\BIN\RWRUN60 module=ASUNTOS destype=screen userid=<username>/<password>@<tns> ABOGADO=<some_valid_code>
    where TOOLS_HOME is the directory where Reports is installed.
    I can see nothing wrong with your code.
    Maybe some error in the query?
    Also, I would check for the existence of multiple ASUNTOS report definitions. Maybe Forms is calling an older one.
    Hope this helps,
    Pedro das Neves
    ([email protected])

  • Calling a Report from Form in 10g

    Hi all,
    I am very new to Oracle Form builder, I wana to call a report from a Form.
    we are using Oracle 10g Developer suit.
    Can any body please help me regarding on this?
    Regards
    Tanmaya Pradhan(Tam)

    ..or
    Take a look at
    Re: Run Report10g  Through form 10g

  • Calling a Report from Bapi

    Dear  all,
    I am trying to create a customer from external system through bapi. For this is i have to follow these steps.
    1)  I am trying to call a report from external system through bapi.
    2)  I want to pass data from bapi to a bdc program and run it to create a customer.
    3) After creating a customer I need to send the  ceated customer no again to the bapi from where i passed the data to bdc.
    is it possible .
    Give me a good idea on this how to work with it.
    Regards,
    Madhu.

    Hi Madhu,
    SAP has already given standard BAPI to create customer creation "BAPI_CUSTOMER_CREATEFROMDATA". So there is no need for you to create any thing new. Jut test this BAPI first whether this suit your requirement or not. If it satisfy your requirement then call it directly from external system. On how to call this BAPI or other BAPis searc google or SDn you will definetaly find something.
    second approach is if nothing works for you( No BAPI satisfy your requirement) then only go for BDC aapproach. To do that, create a RFC function module( BAPi and RFC FM are diff thing, they looks same  but they are not ). Inside your RFC FM directly write the BDC code to create customer.
    Regards
    Anurag

  • Calling a report from an existing form

    hi all,
    i am new to this forms and reports. i have created a report which gives information about an employee. and name it as activity report. i am using reports Report Builder 10.1.2.0.2. i have also created a form. my purpose is " i will enter the employee id, a starting and ending dates as input to the form. these values r to be passed to the query of the reports and the report has to extract the records of that employee between the start and end dates." how can i achieve this. i am entirely new to this reports and forms. please give me a clear reply so that i can call my report and pass that dates and id to my report. and also please explain me how to call a report from a form and make it to run. please make me clear where to write the code whether in forms or rports.
    thank you.

    Hi,
    Check this sample Code..
    DECLARE
    pl_id ParamList;
    pl_name VARCHAR2(10) := 'repdata';
    BEGIN
    pl_id := Get_Parameter_List(pl_name);
    IF Id_Null(pl_id) THEN
    pl_id := Create_Parameter_List(pl_name);
    Add_Parameter(pl_id, 'P_STARTDATE', TEXT_PARAMETER,:BLK_CTRL.P_TODATE);     
    Add_Parameter(pl_id, 'P_ENDDATE', TEXT_PARAMETER, :BLK_CTRL.P_CURRENCY);
    Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
    ELSE
    Destroy_Parameter_List( pl_id );
    END IF
    RUN_PRODUCT(REPORTS, 'D:\MMRROLDL.RDF' ,SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id ,NULL);
    END;

  • Calling a report from another report

    Hi,
    Is there any way ,(any built in ) to call a report from another report in Report Builder 2000 and Report Builder 6i.
    Regards

    Try to call report from report by a button in the calling report:
    1     In the Layout Model view, click in the tool palette. Note
    2     Click and drag a rectangle.
    3     Double-click the button object to display the Property Palette.
    4     Under the Button Label node, set the Label Type property to either Text or Icon:
    n     If the button label is text, set the Text property to the text you want to appear on the button.
    n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
    5     Under the Button Behavior node, set the Type property to PL/SQL.
    6     Double-click the PL/SQL Trigger property value field.
    7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
    8     Set other properties as desired.
    9     To activate the button, run the report, then display it in the Runtime Previewer.

  • Calling a report from a report (10g)

    Hi
    I am using DeveloperSuite 10g and Application Server 9.0.4 - I am trying to call a report from another report.
    I believe I am correct in thinking that as buttons don't exist in reports any more I have to use a hyperlink containing the URL to the reports service with appropriate parameters to invoke the required report.
    My problem is that when I click on the hyperlink I do not see the called report, but get an html screen saying "Oracle Report Status - Successfully run".
    My hyperlink is formed like this:
    /reports/rwservlet?module=reportb.rdf
    Is there an additional parameter I must pass to get the report to display on the client browser window?
    Thanks

    Hi,
    Can someone let me know as to what the maximum length of the URL string that could be formed? I believe in IE browser a maximum of 64,000 characters can only be formed. If I need to pass many parameters and the length of the values passed exceeds the default length in IE, the rest of the values will not be captured in the report server.
    Please let me know on how to proceed with this problem.

  • Calling a report from a report

    I would like to know how to call a report from another report
    Thanx in advance
    RAM

    you can use a SRW.RUN_REPORT to calla report from a report

Maybe you are looking for