Calling SAP function modules in C#.

Dear All,
i want to connect and call the Function Modules of SAP i.e. DLLs into C#.Net.
Could anyone tell me plz how to do that?
Thanks & Regards,
Muskaan.

Have you looked at the SAP Connector for Microsoft .NET (NCo, also known as "SAP .NET Connector")? This is made exactly for that and comes with documentation and samples. SAP customers can download it from http://service.sap.com/connectors .

Similar Messages

Can i call a function module of SAP?

Hi, i have a question... Can i call a function module of SAP... I need print a document from a device, can i call the function module of SAP in order that me it prints it?
Thanks,

Hi Victor,
you can use the GenericSync Example of the MDK. This calls the Module to verify the user directly. Generic Sync is exactly for that purpose: call a BADI directly and no usage of SyncBO. Be aware, that you - out of the box- sync your app data as well at that moment, because a sync runs both - generic and smartsync. Even worse: even when you have nothing to sync in Generic Sync - so nothing to print - it will call the function module for generic sync as long as it is registered.
Well, anyway, this is the way to call a function module separate.
If it works with you rparticular print module? I have no idea, but if this is a normal function module - well, it should be ok.
Hope this helps.
Regards,
Oliver

Calling a functional module in SAP

Hi
We have a require ment like we need to update the details in SAP by calling a functional module, the data comes from a legacy which deletes immediately after it sends to XI by using a webservice, It is XI responsibility to update the details. In case SAP is down , Can we preserve this message and update SAP as and when the SAP is Up.
Please comment.
Regs
Ramesh

Hi Prasad
Thank you so much. It has good information.
As Naveen Pandrangi's blog
XI : RFCAdapter ReConnect Issue
"when the end system comes up, calls from XI would be successful. RFC Adapter would now check the connection for every message instead of only once when the communication channel is updated."
Here small question is what about the old messages that were failed due to Connection Failure or SAP down.
Please try to comment.
Thanks in advance
Ramesh

Can a SQL Server stored procedure call an SAP function module?

Can a SQL Server stored procedure call an SAP function module.? The stored procedure will be called via a trigger when data records are added to a Z table.

You have two options:
- the other software can use the RFC SDK and call directly in the system
- the other software can use a database connect
Markus

Calling RFC function module in other SAP system...

Hi,
I have a report on one SAP system and a function module on other system. The function module is RFC enabled. How can I call this RFC enabled function module from other SAP system in the report which is different SAP ?
system.
Thanks.
Regards,
Rajesh.

call the function module in orginal system in se38 ,copy the function module ,paste the function module in other system,and maintain destination here ,otherwise you will get short dump.
here detination should be SM59 destination,this is case sensitive.
Reward Points if it is helpful
Thanks
Seshu

Can we call a function module in ADHOC query

Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
Rajeev

Okay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
 Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
 begcol TYPE i DEFAULT 1 NO-DISPLAY,
 begrow TYPE i DEFAULT 1 NO-DISPLAY,
 endcol TYPE i DEFAULT 100 NO-DISPLAY,
 endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
 INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
 INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
 col LIKE alsmex_tabline-col,
 size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
 zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
 title(60),
 table(6),
 field(10),
 kz(1),
 END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
 value_0001(50),
 value_0002(50),
 value_0003(50),
 value_0004(50),
 value_0005(50),
 value_0006(50),
 value_0007(50),
 value_0008(50),
 value_0009(50),
 value_0010(50),
 value_0011(50),
 value_0012(50),
 value_0013(50),
 value_0014(50),
 value_0015(50),
 value_0016(50),
 value_0017(50),
 value_0018(50),
 value_0019(50),
 value_0020(50),
 value_0021(50),
 value_0022(50),
 value_0023(50),
 value_0024(50),
 value_0025(50),
 value_0026(50),
 value_0027(50),
 value_0028(50),
 value_0029(50),
 value_0030(50),
 value_0031(50),
 value_0032(50),
 value_0033(50),
 value_0034(50),
 value_0035(50),
 value_0036(50),
 value_0037(50),
 value_0038(50),
 value_0039(50),
 value_0040(50),
 value_0041(50),
 value_0042(50),
 value_0043(50),
 value_0044(50),
 value_0045(50),
 value_0046(50),
 value_0047(50),
 value_0048(50),
 value_0049(50),
 value_0050(50),
 value_0051(50),
 value_0052(50),
 value_0053(50),
 value_0054(50),
 value_0055(50),
 value_0056(50),
 value_0057(50),
 value_0058(50),
 value_0059(50),
 value_0060(50),
 value_0061(50),
 value_0062(50),
 value_0063(50),
 value_0064(50),
 value_0065(50),
 value_0066(50),
 value_0067(50),
 value_0068(50),
 value_0069(50),
 value_0070(50),
 value_0071(50),
 value_0072(50),
 value_0073(50),
 value_0074(50),
 value_0075(50),
 value_0076(50),
 value_0077(50),
 value_0078(50),
 value_0079(50),
 value_0080(50),
 value_0081(50),
 value_0082(50),
 value_0083(50),
 value_0084(50),
 value_0085(50),
 value_0086(50),
 value_0087(50),
 value_0088(50),
 value_0089(50),
 value_0090(50),
 value_0091(50),
 value_0092(50),
 value_0093(50),
 value_0094(50),
 value_0095(50),
 value_0096(50),
 value_0097(50),
 value_0098(50),
 value_0099(50),
 value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 mask = '*.xls'
 static = 'X'
 CHANGING
 file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = filename
 i_begin_col = begcol
 i_begin_row = begrow
 i_end_col = endcol
 i_end_row = endrow
 TABLES
 intern = intern
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
 intern1 = intern.
 CLEAR intern1-row.
 APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
 AT NEW col.
 t_col-col = intern1-col.
 APPEND t_col.
 ENDAT.
 zwlen = strlen( intern1-value ).
 READ TABLE t_col WITH KEY col = intern1-col.
 IF sy-subrc EQ 0.
 IF zwlen > t_col-size.
 t_col-size = zwlen.
* Internal Table, Current Row Index
 MODIFY t_col INDEX sy-tabix.
 ENDIF.
 ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
 LOOP AT intern.
 fieldnames-title = intern-value.
 APPEND fieldnames.
 AT END OF row.
 EXIT.
 ENDAT.
 ENDLOOP.
ELSE.
 DO zwlines TIMES.
 WRITE sy-index TO fieldnames-title.
 APPEND fieldnames.
 ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
 IF kzheader = 'X'
 AND intern-row = 1.
 CONTINUE.
 ENDIF.
 tind = intern-col.
 CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
 ASSIGN (zwfeld) TO <fs1>.
 <fs1> = intern-value.
 AT END OF row.
 APPEND data_tab.
 CLEAR data_tab.
 ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
 EXPORTING
 file_name = filename
 TABLES
 data_tab = data_tab
 fieldname_tab = fieldnames.
*-- End of Program
Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT
*Title : Excel Uploading
TYPES: BEGIN OF t_datatab,
 col1(25) TYPE c,
 col2(30) TYPE c,
 col3(30) TYPE c,
 col4(30) TYPE c,
 col5(30) TYPE c,
 col6(30) TYPE c,
 col7(30) TYPE c,
 col8(30) TYPE c,
 col9(30) TYPE c,
 col10(30) TYPE c,
 col11(30) TYPE c,
 END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
 wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol TYPE i VALUE '1',
 gd_srow TYPE i VALUE '1',
 gd_ecol TYPE i VALUE '256',
 gd_erow TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
 gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
 DEFAULT 'c:test.xls' OBLIGATORY. " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
 EXPORTING
 window_title = 'Select File'
 default_filename = '*.xls'
 multiselection = ' '
 CHANGING
 file_table = it_tab
 rc = gd_subrc.
LOOP AT it_tab INTO p_file.
* so_fpath-sign = 'I'.
* so_fpath-option = 'EQ'.
* append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES it_datatab
 USING p_file
 gd_scol
 gd_srow
 gd_ecol
 gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
 WRITE:/ wa_datatab-col1,
 wa_datatab-col2,
 wa_datatab-col3,
 wa_datatab-col4,
 wa_datatab-col5,
 wa_datatab-col6,
 wa_datatab-col7,
 wa_datatab-col8,
 wa_datatab-col9,
 wa_datatab-col10,
 wa_datatab-col11.
ENDLOOP.
*& Form UPLOAD_EXCEL_FILE
* upload excel spreadsheet into internal table
* -->P_TABLE Table to return excel data into
* -->P_FILE file name and path
* -->P_SCOL start column
* -->P_SROW start row
* -->P_ECOL end column
* -->P_EROW end row
FORM upload_excel_file TABLES p_table
 USING p_file
 p_scol
 p_srow
 p_ecol
 p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
* Row number | Colum Number | Value
* i.e. 1 1 Name1
* 2 1 Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
 EXPORTING
 filename = p_file
 i_begin_col = p_scol
 i_begin_row = p_srow
 i_end_col = p_ecol
 i_end_row = p_erow
 TABLES
 intern = LT_INTERN
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 FORMAT COLOR COL_BACKGROUND INTENSIFIED.
 WRITE:/ 'Error Uploading file'.
 EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
 FORMAT COLOR COL_BACKGROUND INTENSIFIED.
 WRITE:/ 'No Data Uploaded'.
 EXIT.
ELSE.
 SORT lt_intern BY row col.
 LOOP AT lt_intern.
 MOVE lt_intern-col TO ld_index.
 assign component ld_index of structure
 p_table to <fs>.
move : lt_intern-value to <fs>.
* MOVE lt_intern-value TO p_table.
 AT END OF row.
 APPEND p_table.
 CLEAR p_table.
 ENDAT.
 ENDLOOP.
ENDIF.
ENDFORM. "UPLOAD_EXCEL_FILE
Regards
Pavan

System failure, during call of function module RSWR_RFC_SERVICE_TEST

Hi Team,
     I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
        at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
        at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
        at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
        at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
        at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
        at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
        at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
        at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
        at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
        at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.

Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew

Call of function module "SUBST_START_BATCHJOB" by RFC failed

Hello Guru's,
We have the following Issue:
In Phase PREP_INIT/JOB_RSUPDTEC we get this error from EHPI (Version 710-1)
Checks after phase PREP_INIT/JOB_RSUPDTEC were negative!
Last error code set: BATCHJOB RSUPDTEC FAILED: Calling RSUPDTEC failed - repeat phase.
In the file PSUPDTEC.LOG are the following error:
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ230 Starting RFC Login to: System = "E11", GwHost = "sape11", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="E11", Nr="00", GwHost="sape11", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPDTEC', REPNAME='RSUPDTEC', VARNAME='', BATCHHOST='sape11', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='14230100'
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "27")
2EETQ261 Start of batchjob "RSUPDTEC" failed
In the Sysem we can see, that the Job RSUPDTEC was created by DDIC but not started.
We can start (and finish) the job successfully as logged in DDIC.
We don't know whats the problem. The EHPI stopped every time at this point.
Need Help...
regards
Chris

Issue solved.
In /etc/hosts the first entry was SAPE11.
But it must be sape11, because the instance is sape11_E11_00.
In SM51 we could see that
sape11_E11_00 SAPE11 Dialog Batch Update Upd2 Spool Enqueue ICM active
We changed the entry and restarted SAP.
Then the job can be started.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Exception handling for a standard SAP Function Module - the OO way

Hello,
I was wondering what is the correct way to call a standard SAP function module inside a method of global class.
I want to display the error via the:
get_text( ) and get_longtext( ) methods.
I don't want to use the sy-subrc check. Is this possible?
My example doesn't seem to work...
See example bellow:
DATA: ex_object_cx_root TYPE REF TO cx_root,
 ex_text TYPE string,
 ex_text_long TYPE string.
TRY.
 CALL FUNCTION 'L_TO_CONFIRM'
 EXPORTING
 i_lgnum = i_lgnum " Warehouse number
 i_tanum = i_tanum " Transfer order number
 i_quknz = '1' " '1' - confirm withdrawal only (picking )
 i_commit_work = 'X' " Indicator whether COMMIT WORK in function module
 TABLES
 t_ltap_conf = it_ltap_conf " Table of items to be confirmed
 EXCEPTIONS
 to_confirmed = 1 " Transfer order already confirmed
 to_doesnt_exist = 2
 item_confirmed = 3
 item_subsystem = 4
 to_item_split_not_allowed = 51
 input_wrong = 52
 OTHERS = 53.
 CATCH cx_root INTO ex_object_cx_root.
 ex_text = ex_object_cx_root->get_text( ).
 ex_text_long = ex_object_cx_root->get_longtext( ).
 " Error:
 RAISE EXCEPTION TYPE zcx_transfer_order
 EXPORTING textid = zcx_transfer_order=>zcx_transfer_order
 err_class = 'ZCL_WM_TRANSFER_ORDER'
 err_method = 'CONFIRM_TO_2STEP_PICKING'
 err_message_text = ex_text
 err_message_text_long = ex_text_long.
ENDTRY.
Thank you very much in advance

Hello Marko,
If i understand correctly you've enclosed the call to the FM 'L_TO_CONFIRM' inside the TRY ... CATCH ... ENDTRY block.
CATCH cx_root INTO ex_object_cx_root.
 ex_text = ex_object_cx_root->get_text( ).
 ex_text_long = ex_object_cx_root->get_longtext( ).
You can't do this because the FM 'L_TO_CONFIRM' doesn't propagate OO exceptions!
Your approach is almost correct, what you've to do is goes like this:
CALL FUNCTION 'L_TO_CONFIRM'
EXPORTING
 i_lgnum = i_lgnum " Warehouse number
 i_tanum = i_tanum " Transfer order number
 i_quknz = '1' " '1' - confirm withdrawal only (picking )
 i_commit_work = 'X' " Indicator whether COMMIT WORK in function module
TABLES
 t_ltap_conf = it_ltap_conf " Table of items to be confirmed
EXCEPTIONS
 to_confirmed = 1 " Transfer order already confirmed
 to_doesnt_exist = 2
 item_confirmed = 3
 item_subsystem = 4
 to_item_split_not_allowed = 51
 input_wrong = 52
 OTHERS = 53.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
 INTO ex_text. "Get the ex_text by this technique & not by CX_ROOT->GET_TEXT()
ENDIF.
I'll have to check how to fetch the long text of the message
BR,
Suhas

Can one call a function module in Calculated Key Figure?

Can one call a function module in Calculated Key Figure? If yes how, if not, what is the solution if formula does not suffice?
I want to convert duration which is in seconds to Duration in Hours and Minutes. There is a function module for doing it. Not sure how to do it in a formula.

One option you have is a Virtual Key Figure and User Exit to use the Function Module to convert the time from seconds to HH:MM. Here are two documents on this subject to help you create them, based on the technology your comfortable with:
[Implementing Virtual Key Figure/ Characteristics Makes Query More Dynamic|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true]
[Step By Step Process for Virtual Key Figures and Characteristics through BAdi|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c&overridelayout=true]

System failure during call of function module RSWR_RFC_SERVICE_TEST in BW

Hello All,
            I am doing configuration with BW and EP portal when we run the program (RSPOR_SETUP) in step - 12 Maintain User Assignment in Portal = (System failure during call of function module RSWR_RFC_SERVICE_TEST) giving this error SSO is working fine.
RFC connection is working fine with BW and portal
When i execute the FM - RSWR_RFC_SERVICE_TEST it is giving error (SYSTEM_FAILURE) and in Portal side log file it is giving below error.
dev_jrfc.trc
Exception thrown [Fri Sep 05 15:14:57,928]:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host (Hostname), ProgId=EPP_PORTAL_SID: Object not found in lookup of RSWR_RFC_SERVICE_TEST.
        at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:138)
        at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please help me find the solution.
Thanks
Gurpal

Hi Gurpal,
Please go through the below SAP notes
878455
- Information broadcasting: No portal user exists
814083
- Inf. broadcasting: Changed RFC settings as of NW 04 SP11
1135947 - Bean not found
Hope this solves your problem.
Regards,
Prithviraj.

How to call a function module dynamically?

Hi
I am doing a smartform development and here my scenario.
Scenario:
There will be a simple report which will trigger a smartform output. The report has a selection screen and and in one of the field the user will enter the layout name or the layout name will be stored in the variant so that the user need not remember the layout name.
Based on the layout selected i need to show the output.
What i have coded:
In my program after selecting the data i am calling the FM SSF_FUNCTION_MODULE_NAME which will return the function module name to be called.
Question:
How do i call the function module dynamically. I cannot do a single call to the function module using the FM name derived from the above function call. I want to make the interface calling dynamic. We dont want to hardcode the function calls coz we may have many layouts to be called so how is it possible in SAP to call the FM interface dynamically.
~Suresh

Actually you can call the FM dynamically in by taking it into one variable and than use the CALL FUNCTION V_FM_NAME.
But the problem here is, you need to take care about the importing, exporting and tables parameters. They needs to be same for all FMs which you are planning to call. Otherwise system will give you a run time error.
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING FORMNAME = LF_FORMNAME
* variant = ' '
* direct_call = ' '
 IMPORTING FM_NAME = LF_FM_NAME
 EXCEPTIONS NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
 CALL FUNCTION LF_FM_NAME
 EXPORTING
 ARCHIVE_INDEX = TOA_DARA
 ARCHIVE_PARAMETERS = ARC_PARAMS
 CONTROL_PARAMETERS = LS_CONTROL_PARAM
* mail_appl_obj =
* mail_recipient = ls_recipient
 MAIL_SENDER = LS_SENDER
Regards,
Naimesh Patel

How to call a function module from a workflow ? ?

hi all,
i have to call a function module from an workflow, i got a hint from someone that i have to enhance an object and then write and methode, in this methode i can call that function module. I dont know even how to go for it.
Can anyone suggest that how to go for it ?
thanks.
raman khurana.

Hi Raman Khurana,
Please go through the links it might be helpful , notsure
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4af8b453d11d189430000e829fbbd/content.htm
http://www.abapcode.info/2007/07/standard-function-module-text.html
http://it.toolbox.com/wiki/index.php/SAP_Workflow
Regards,
Sreekar.Kadiri.

Calling SAP function modules in C#.

Similar Messages

Maybe you are looking for