Calling screen from another transaction
Hi,
If I want to call screen from other standard or custom transaction into my custom transaction, how do I do it?
Thanks.
Tushar.
Hello See this link ,
http://www.sapgenie.com/abap/bdc.htm
This contains the program which calls the transaction using BDC.
Hopping this will help for you
Similar Messages
-
Probe in calling tabstriped screen from another screen ..
hi
could any one please help me ,,,that what is the logic for calling tabstriped screen from another screen ..
Thanks N Regards
PriyaHi,
Jonathan.
Thanks for the response ...
I did execute with call screen statement ...(CALL SCREEN 0123). ..when i excute the program its working fine ,but the same programe when I execute with the T.CODE ...its giving erorr ...
ERORR:Program " ZTEST "tried to use screen 000.
the screen doesn't exist.
HERE IS CODE.
let me know where is the mistake ..
could you please , help me ,,what i suppose to do .
let me know where is the mistake ..
REPORT ZTEST .
DATA: DATE LIKE SY-DATUM,
TIME LIKE sy-uzeit.
DATA number TYPE sy-dynnr.
CONTROLS tabstrip TYPE TABSTRIP.
tabstrip-activetab = 'TAB1'.
number = '1003'.
tabstrip-activetab = 'TAB2'.
number = '1004'.
CALL SCREEN 1000.
*& Module STATUS_1000 OUTPUT
text
MODULE STATUS_1000 OUTPUT.
CASE : SY-UCOMM.
WHEN 'ENTER'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'MOD'.
DATE = DATE.
TIME = time.
SCREEN-INPUT = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDCASE.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_1000 OUTPUT
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
WHEN 'ENTER'.
LEAVE TO SCREEN 1001.
endcase.
ENDMODULE. " USER_COMMAND_1000 INPUT
*& Module USER_COMMAND_1001 INPUT
text
MODULE USER_COMMAND_1001 INPUT.
CASE SY-UCOMM.
WHEN 'button1'.
CALL SCREEN 1002.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
*& Module USER_COMMAND_1002 INPUT
text
MODULE USER_COMMAND_1002 INPUT.
CASE sy-ucomm.
WHEN 'TAB1'.
number = '1003'.
WHEN 'TAB2'.
number = '1004'.
ENDCASE.
ENDIF.
ENDMODULE. " USER_COMMAND_1002 INPUT
*& Module STATUS_1002 OUTPUT
text
MODULE STATUS_1002 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_1002 OUTPUT
Thanks N Regards.
Priya. -
Is it possible to call methods from another class from within an abstract c
Is it possible to call methods from another class from within an abstract class ?
I found an example in teh JDK 131 JFC that may help you. I t is using swing interface and JTable
If you can not use Swing, then you may want to do digging or try out with the idea presented here in example 3
Notice that one should refine the abstract table model and you may want to create a method for something like
public Object getValuesAtRow(int row) { return data[row;}
to give the desired row and leave the method for
getValuesAt alone for getting valued of particaular row and column.
So Once you got the seelcted row index, idxSelctd, from your table
you can get the row or set the row in your table model
public TableExample3() {
JFrame frame = new JFrame("Table");
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {System.exit(0);}});
// Take the dummy data from SwingSet.
final String[] names = {"First Name", "Last Name", "Favorite Color",
"Favorite Number", "Vegetarian"};
final Object[][] data = {
{"Mark", "Andrews", "Red", new Integer(2), new Boolean(true)},
{"Tom", "Ball", "Blue", new Integer(99), new Boolean(false)},
{"Alan", "Chung", "Green", new Integer(838), new Boolean(false)},
{"Jeff", "Dinkins", "Turquois", new Integer(8), new Boolean(true)},
{"Amy", "Fowler", "Yellow", new Integer(3), new Boolean(false)},
{"Brian", "Gerhold", "Green", new Integer(0), new Boolean(false)},
{"James", "Gosling", "Pink", new Integer(21), new Boolean(false)},
{"David", "Karlton", "Red", new Integer(1), new Boolean(false)},
{"Dave", "Kloba", "Yellow", new Integer(14), new Boolean(false)},
{"Peter", "Korn", "Purple", new Integer(12), new Boolean(false)},
{"Phil", "Milne", "Purple", new Integer(3), new Boolean(false)},
{"Dave", "Moore", "Green", new Integer(88), new Boolean(false)},
{"Hans", "Muller", "Maroon", new Integer(5), new Boolean(false)},
{"Rick", "Levenson", "Blue", new Integer(2), new Boolean(false)},
{"Tim", "Prinzing", "Blue", new Integer(22), new Boolean(false)},
{"Chester", "Rose", "Black", new Integer(0), new Boolean(false)},
{"Ray", "Ryan", "Gray", new Integer(77), new Boolean(false)},
{"Georges", "Saab", "Red", new Integer(4), new Boolean(false)},
{"Willie", "Walker", "Phthalo Blue", new Integer(4), new Boolean(false)},
{"Kathy", "Walrath", "Blue", new Integer(8), new Boolean(false)},
{"Arnaud", "Weber", "Green", new Integer(44), new Boolean(false)}
// Create a model of the data.
TableModel dataModel = new AbstractTableModel() {
// These methods always need to be implemented.
public int getColumnCount() { return names.length; }
public int getRowCount() { return data.length;}
public Object getValueAt(int row, int col) {return data[row][col];}
// The default implementations of these methods in
// AbstractTableModel would work, but we can refine them.
public String getColumnName(int column) {return names[column];}
public Class getColumnClass(int col) {return getValueAt(0,col).getClass();}
public boolean isCellEditable(int row, int col) {return (col==4);}
public void setValueAt(Object aValue, int row, int column) {
data[row][column] = aValue;
}; -
We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??
hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport -
iPad revers back to a home screen from another page being used, IE Facebook Good battery and wifi signal. Sometimes several times in a couple of minutes. Could there be an problem with internal hardware
Hi there
My wife and I have been dealing with a very similar issue with our iPhone 5ss, all battery drain issues started after the upgrade to ios 7.03. We have performed numerous restores and have had 3 trips to the Genius Bar. Finally they gave us new iPhones (yesterday). We had hoped this would do the trick but we have the same problem on the new phones.
This morning I restored one and didn't sign into iCloud. Battery drain is now gone. And when I deleted iCloud from my wife's phone it too went back to normal. So I believe the culprit is iCloud and I am now testing various setups with iCloud to determine which app/setting is causing the problem.
Hope this helps with your phones. I will post again if I can narrow it down to something specific.
Good luck! -
Calling package from another package
Hi gurus,
Quick question
Say i m in user1 schema.
I want to call package from another package in the same schema. So do i need to grant permission to the calling package to call.Thank you!!Why don't you test it?
create or replace package pack2
is
procedure t2;
end;
Package created.
create or replace package body pack2
is
procedure t2
is
begin
dbms_output.put_line('Inside Pack2 And t2');
end;
end;
Package Body created.
create or replace package pack1
is
procedure t1;
end;
Package created.
create or replace package body pack1
is
procedure t1
is
begin
pack2.t2;
dbms_output.put_line('Inside Pack1 And t1');
end;
end;
Package Body created.
begin
pack1.t1;
end;
Inside Pack2 And t2
Inside Pack1 And t1
Statement processed.
0.11 secondsRegards.
Satyaki De -
How to call Screen in another program from exsisting program
Hello Frieds,
Can any one help me how to call a screen in another program (Say "test2") from exsisting program(say "test1')
If above case is possible then how to access the fields in the target screen?
Your responce is greatly appreciated.
Best Regards,
RakeshHi Rakesh,
If you wish to use ONLY the screen of another program, call transaction will not help you, because the called transaction will be fully executed (and not only the screen), and the acess to screen field wil be difficult.
When you wish to access the same screen from more than one program, you can create this screen in a function module and in this way you can call the function (to display the screen) in many programs.
Best regards,
Leandro Mengue -
How to call dynamic selection screen from another report
hi,
i have transaction ZFAGLL03.
it has got standard selection screen.. and dynamic selection screen...
i am calling this transaction from another report, now how do i display this dynamic selection screen.....Try following code and see if it helps:
TYPE-POOLS : rsds.
TABLES:tgsb.
DATA: trange TYPE rsds_trange,
trange_line
LIKE LINE OF trange,
trange_frange_t_line
LIKE LINE OF trange_line-frange_t,
trange_frange_t_selopt_t_line
LIKE LINE OF trange_frange_t_line-selopt_t,
trange_line1
LIKE LINE OF trange,
trange_frange_t_line1
LIKE LINE OF trange_line-frange_t,
trange_frange_t_selopt_t_line1
LIKE LINE OF trange_frange_t_line-selopt_t,
texpr TYPE rsds_texpr.
DATA: seltab TYPE TABLE OF rsparams WITH HEADER LINE,seltex TYPE rsds_texpr.
SELECT-OPTIONS:so_gsber FOR tgsb-gsber.
LOOP AT so_gsber.
trange_line-tablename = 'FAGLFLEXA_FS'.
trange_frange_t_line-fieldname = 'RBUSA'.
MOVE-CORRESPONDING so_gsber TO trange_frange_t_selopt_t_line.
APPEND trange_frange_t_selopt_t_line
TO trange_frange_t_line-selopt_t.
ENDLOOP.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit FAGL_ACCOUNT_ITEMS_GL with FREE SELECTIONS texpr AND RETURN . -
Calling custom dialog screen from Standard Transaction(user Exit)
Hi, I'm calling Standard Transaction from a Custom Screen. I'm calling a custom screen again with in standard transaction (implemented custom screen thru user exits using macros). But when I click 'continue/cancel' in the custom screen, control is going back to main cutom screen rather go back to standard transaction. Could anyone please help me out how to come back to standard transaction from custom screen rather going back to main cutom screen.
***INCLUDE LZ_R_FORWARD_FORWARD_LOADI01 .
*& Module USER_COMMAND_9000 INPUT
MODULE user_command_9000 INPUT.
CASE sy-ucomm.
WHEN 'EXEC'.
PERFORM validate_popup_data.
IF flag_error_screen NE 'X'.
MOVE-CORRESPONDING ZFFL_POPUP to var_ZFFL_POPUP.
clear flag_return.
SET SCREEN 0.
LEAVE SCREEN.
ENDIF.
WHEN 'CANC'.
flag_return = 'X'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module exit_9000 INPUT
MODULE exit_9000 INPUT.
CASE sy-ucomm.
WHEN 'CANC'.
* MOVE perf_flag TO lbpla_exist_flag.
flag_return = 'X'.
SET SCREEN 0.
LEAVE SCREEN.
ENDCASE.
ENDMODULE. " exit_9000 INPUT
Thanks in advance.Hi
So the command SET SCREEN 0. LEAVE SCREEN. should "place" the program just after the calling of the popup so here:
FUNCTION z_call_screen.
* Call the Pop up screen
CALL SCREEN 9000 STARTING AT 35 05.
"<------------------------- The program should be here after going back from popup 9000
ENDFUNCTION.
Is it true?
Max -
Calling selection screen from another selecton screen.
Hi guys,
I want to call default selection screen of one program from default selection screen of another program.
Is that possible . would appreciate some helpful answers.
Thanks,
Venkat.it is possiable.
1.submit
2. call transcation t_code.
Syntax
SUBMIT <prog>.
For more information about the SUBMIT statement, see Calling Executable Programs (Reports)
Assume the following simple report:
REPORT ZDYN3.
WRITE / 'Dynamic Program!'.
The following executable program (report) starts, modifies, and restarts ZDYN3:
REPORT ZMASTER1.
DATA CODE(72) OCCURS 10.
DATA LIN TYPE I.
READ REPORT 'ZDYN3' INTO CODE.
SUBMIT ZDYN3 AND RETURN.
DESCRIBE TABLE CODE LINES LIN.
MODIFY CODE INDEX LIN FROM
'WRITE / ''Dynamic Program Changed!''.'.
INSERT REPORT 'ZDYN3' FROM CODE.
SUBMIT ZDYN3.
The output of this program is displayed on two subsequent output screens. The first screen displays:
Dynamic Program!
The second screen displays:
Dynamic Program Changed !
When you use the SUBMIT statement, all modifications made to a program during runtime take immediate effect before they are submitted. In the above example, ZDYN3 is submitted from ZMASTER1 first in its original and then in its modified form, generating different results.
This is not the case if you change the codes of include programs or subroutines dynamically.
Assume the following include program:
INCLUDE ZINCLUD1.
WRITE / 'Original INCLUDE program!'.
and an executable program (report) for modifying and including it:
REPORT ZMASTER2.
DATA CODE(72) OCCURS 10.
DATA LIN TYPE I.
READ REPORT 'ZINCLUD1' INTO CODE.
DESCRIBE TABLE CODE LINES LIN.
MODIFY CODE INDEX LIN FROM
'WRITE / ''Changed INCLUDE program!''.'.
INSERT REPORT 'ZINCLUD1' FROM CODE.
INCLUDE ZINCLUD1.
If you run ZMASTER2, the source code of include program ZINCLUD1 is changed and replaced in the system. However, the last line of ZMASTER2 executes the older version since the runtime object of ZMASTER2 is generated before ZINCLUD1 is modified. Only when ZMASTER2 is run a second time, does the system determine that ZINCLUD1 has been changed. Exactly the same is true if you dynamically modify the source code of a subroutine and call it from within the same program.
One way to solve this problem is to use the INCLUDE statement within an external subroutine that is called by the program. This allows you to create or modify include programs or subroutines and use the updated versions directly in the same program.
Assume the following include program:
INCLUDE ZINCLUD1.
WRITE / 'Original INCLUDE program!'.
and an external subroutine:
PROGRAM ZFORM1.
FORM SUB1.
INCLUDE ZINCLUD1.
ENDFORM.
The following program reads the include program, modifies it, enters it back into the system, and calls the subroutine.
REPORT ZMASTER3.
DATA CODE(72) OCCURS 10.
READ REPORT 'ZINCLUD1' INTO CODE.
APPEND 'WRITE / ''Extension of INCLUDE program!''.' TO CODE.
INSERT REPORT 'ZINCLUD1' FROM CODE.
PERFORM SUB1(ZFORM1).
This produces the following output:
Original INCLUDE program!
Extension of INCLUDE program!
In this case, the updated version of the include program is used in the subroutine because its time stamp is checked when the subroutine is called, and not when the calling program is generated. -
Can we call wizard from another wizard
Hello Everyone,
Can we call wizard function module from another wizard function module?
i tried to call, but the road maps and the documentation part of the screen is gettting overlapped.
Are there any parameters to be changed that the wizards can be called within a wizard?
Points assured.
Thanks in advance,
PrashantHi,
Do you mean you want to access BAPI in ABAP report?
If yes, then YES we can call,
1.Create a report -> In pattern write your BAPI name.
2. It is like your FM , Read correspoding BAPI documentation
3. Fill required parametes.
4. Test run and if successful , final run it.
And from Outside,
You have to establish a connection and create a wrapper and access using avaialble APIs.
Reward if useful! -
Can we call screen from ALV report
Hi All,
I am in the process of creating a stand alone application. However I have stuck up here.
Problem: Can we call any screen from ALV report? If yes then how??? Can anyone give some code snippet??
All your help appreciated.
Thanks,
JigneshHello Jignesh,
Here is an example, when you double click on a line, it pops with with another screen that holds details for the flight information.
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click FOR EVENT double_click
OF cl_gui_alv_grid
IMPORTING e_row
e_column.
ENDCLASS. "lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
READ TABLE it_flight INTO wa_flight INDEX e_row-index.
IF sy-subrc EQ 0.
SELECT * FROM sbook
INTO TABLE it_book
WHERE carrid EQ wa_flight-carrid AND
connid EQ wa_flight-connid.
CALL SCREEN 101 STARTING AT 10 10.
ENDIF.
ENDMETHOD. "HANDLE_DOUBLE_CLICK
ENDCLASS. "LCL_EVENT_HANDLER
MODULE status_0101 OUTPUT.
Variant to save the layout
gv_repid = sy-repid.
IF g_custom_container2 IS INITIAL.
Create an instance for Custom Container 'ALV_GRID'
CREATE OBJECT g_custom_container2
EXPORTING container_name = gs_container2.
Create an instance for ALV Grid
CREATE OBJECT g_grid2
EXPORTING i_parent = g_custom_container2.
Variant to save the layout
gs_layout-grid_title = 'Flight Bookings'.
CALL METHOD g_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'SBOOK'
is_layout = gs_layout
CHANGING
it_outtab = it_book[].
ELSE.
CALL METHOD g_grid2->refresh_table_display.
ENDIF. "IF grid2 IS INITIAL.
Setting focus for created grid control
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = g_grid2.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " status_0101 OUTPUT
Refer to BC_ALV_GRID04 for ALV data declarations used in the above piece of code. -
Access to MD03 from another transaction
Hi Gurus,
We did a trace to all the users, and one of them used the MD03 transaction. The point is that he has no authorization to this transaction, so probably he is accessing to it from another.
Could you help me searching any transaction where the user could jump to MD03 from menu, buttons, double click,...?
Thank you in advance.Hi,
Click on Enviornment>>Navigation profile>>Assign. In the General settings tab page you can assign the navigation profile. Just check whether the navigation profile assigned to the user has the T-code MD03. Check the seetings and t-codes in OM0K - Define navigation profile.
But as suggested by Mr.Brahmankar kindly check whether it's possible to access the transaction from MD04 if the user doesn't have the authorization of other transaction which he/she is accessing. In your case MD03. I'm not sure about that.
Regards,
Lodhi.S -
Calling method from another class problem
hi,
i am having problem with my code. When i call the method from the other class, it does not function correctly?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class Dice extends JComponent
private static final int SPOT_DIAM = 9;
private int faceValue;
public Dice()
setPreferredSize(new Dimension(60,60));
roll();
public int roll()
int val = (int)(6*Math.random() + 1);
setValue(val);
return val;
public int getValue()
return faceValue;
public void setValue(int spots)
faceValue = spots;
repaint();
@Override public void paintComponent(Graphics g) {
int w = getWidth();
int h = getHeight();
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
g2.setColor(Color.WHITE);
g2.fillRect(0, 0, w, h);
g2.setColor(Color.BLACK);
g2.drawRect(0, 0, w-1, h-1);
switch (faceValue)
case 1:
drawSpot(g2, w/2, h/2);
break;
case 3:
drawSpot(g2, w/2, h/2);
case 2:
drawSpot(g2, w/4, h/4);
drawSpot(g2, 3*w/4, 3*h/4);
break;
case 5:
drawSpot(g2, w/2, h/2);
case 4:
drawSpot(g2, w/4, h/4);
drawSpot(g2, 3*w/4, 3*h/4);
drawSpot(g2, 3*w/4, h/4);
drawSpot(g2, w/4, 3*h/4);
break;
case 6:
drawSpot(g2, w/4, h/4);
drawSpot(g2, 3*w/4, 3*h/4);
drawSpot(g2, 3*w/4, h/4);
drawSpot(g2, w/4, 3*h/4);
drawSpot(g2, w/4, h/2);
drawSpot(g2, 3*w/4, h/2);
break;
private void drawSpot(Graphics2D g2, int x, int y)
g2.fillOval(x-SPOT_DIAM/2, y-SPOT_DIAM/2, SPOT_DIAM, SPOT_DIAM);
}in another class A (the main class where i run everything) i created a new instance of dice and added it onto a JPanel.Also a JButton is created called roll, which i added a actionListener.........rollButton.addActionListener(B); (B is instance of class B)
In Class B in implements actionlistener and when the roll button is clicked it should call "roll()" from Dice class
Dice d = new Dice();
d.roll();
it works but it does not repaint the graphics for the dice? the roll method will get a random number but then it will call the method to repaint()???
Edited by: AceOfSpades on Mar 5, 2008 2:41 PM
Edited by: AceOfSpades on Mar 5, 2008 2:42 PMOne way:
class Flintstone
private String name;
public Flintstone(String name)
this.name = name;
public String toString()
return name;
public static void useFlintstoneWithReference(Flintstone fu2)
System.out.println(fu2);
public static void useFlintstoneWithOutReference()
Flintstone barney = new Flintstone("Barney");
System.out.println(barney);
public static void main(String[] args)
Flintstone fred = new Flintstone("Fred");
useFlintstoneWithReference(fred); // fred's the reference I"m passing to the method
useFlintstoneWithOutReference();
{code}
can also be done with action listener
{code} private class MyActionListener implements ActionListener
private Flintstone flintstone;
public MyActionListener(Flintstone flintstone)
this.flintstone = flintstone;
public void actionPerformed(ActionEvent arg0)
//do whatever using flinstone
System.out.println(flintstone);
}{code}
Edited by: Encephalopathic on Mar 5, 2008 3:06 PM -
Delay in the Response Group Rining / Call Pickup from another Extension
Dear All,
We have just finished a deployment of Lync 2013 with Sonus 1000 as the Mediation Gateway, we have deloyed polycom VVX 600 phones,
We have two lines E1 and 5 Fxo lines (with same Pilot Number)
I would like the Receptionist to have both E1 DID number and FXO number and her phone to ring when the calls comes from DID line as well as FXO,
I have the below scenario
1) Currently the setup is that Receptionist is configured with the E.164 DID number : (Line URI is Tel:+971XXXX500;ext=500), which work perfectly fine
2) We have added receptionist in Response Group , and setting are (Formal,10 sec , Attendant)
The issue :
1) Call forwarding does not work on Response Group (which is by design it self)
2) When a call comes from the outside to FXO it goes to response group , (there is Music played and the ring on reception is delayed by 2-3 secs) ,
Customer does not want this delay , it should ring immediately with no music,
3) If the receptionist moves from one location to any other location to another , she should have the ability to remotely perform call forward to that extension by simply dialing few codes on the phone ( I already told customer
about PIN based authentication, by customer does like the idea of signing in or signing out)
In DIRE NEED OF HELP,
Regards,
Hasan Reza,Hi,
Did the issue only happen for IP Phone in Response Group or also happen for Lync client in Response Group?
If the issue only happen for IP Phone, it seems to be an known issue. Please Make sure Lync Server update to the latest version and then test again.
Here are several similar case may help you:
https://social.technet.microsoft.com/Forums/lync/en-US/196375a5-3ae9-4452-acbe-2679a8deef80/delay-when-response-group-calls-are-answered
https://social.technet.microsoft.com/Forums/lync/en-US/70306bf5-fcd3-488a-b6f4-2eee1bcc0457/lync-2010-ip-phone-calls-and-response-group-delays
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support
Maybe you are looking for
-
I can't use my Philips monitor with Mac mini
I can't use my Philips monitor with Mac mini, I am using a HDMI to VGA cable to connect them. But no signal on my Philips monitor. My Mac mini is in a good condition, it can connect with my HDTV, the BENQ monitor at my office, but I can't make it con
-
Zen Touch: Is clean up supposed to reset touch pad settin
Whenever I do a clean-up, it resets the touch pad to "Clicker: On" and "Sensitivity: Medium." Is this normal? Could this be addressed Creative?
-
How do I call methods with the same name from different classes
I have a user class which needs to make calls to methods with the same name but to ojects of a different type. My User class will create an object of type MyDAO or of type RemoteDAO. The RemoteDAO class is simply a wrapper class around a MyDAO object
-
Round trip editing with BC?
Is there round trip editing between Muse and Business Catalyst? Or once it is published to BC and gone live you can still only edit in Muse? If you add a BC tag within Business Catalyst it will break Muse compatibility?
-
Information for Acct Assignment or Cost Center
Hello, I am using SRM 4.0 with R/3 SAP 4.70 as backend . Can anybody let me know while I select Acct Assignment or Cost Center how this backend will call ?And how i can change backend call . Thanks in advance .. Thanks, Mohan