Calling separate LSMW steps from ABAP program

Hai all,
anybody know if I can call sepearte LSWM step from a ABAP programm,
I only need to:
Specify Files
Import Data
Convert Data
Create Batch Input Session
Run Batch Input Session
Need this steps so i can provide backoffice user a tool which imports data using predefined LWSM.
Grtz
Richard
Edited by: Richard van Veen on Jun 7, 2010 1:15 PM

I made a lsmw and after completing all steps i tested step 080/100/300 and 310 from se37, it seems to work fine, i will update when completed
010      Maintain Object Attributes       OBJ     /SAPDMC/LSM_OBJ_ATTRIBUTES
020      Maintain Source Structures      OBJ     /SAPDMC/LSM_OBJ_SOURCE_STRUCS
030      Maintain Source Fields OBJ     /SAPDMC/LSM_OBJ_SOURCE_FIELDS
040      Maintain Structure Relations     OBJ     /SAPDMC/LSM_OBJ_STRUCT_RELATNS
050      Maintain Field Mapping and Conversion Rules OBJ     /SAPDMC/LSM_OBJ_FIELDMAPPING
070      Maintain Fixed Values, Translations, User-Defined Routines    RUL            /SAPDMC/LSM_RUL_ADMINISTRATION
080      Specify Files    OBJ     /SAPDMC/LSM_OBJ_FILES_SPECIFY
090      Assign Files      OBJ     /SAPDMC/LSM_OBJ_FILES_ASSIGN
110      Import Data     EXE     /SAPDMC/LSM_EXE_READPROG_RUN
120      Display Imported Data DSP     /SAPDMC/LSM_DSP_READ_DATA_SHOW
130      Convert Data   EXE     /SAPDMC/LSM_EXE_CONVPROG_RUN
140      Display Converted Data           DSP     /SAPDMC/LSM_DSP_CONV_DATA_SHOW
300      Create Batch Input Session      EXE     /SAPDMC/LSM_EXE_BI_PROGRAM_RUN
310      Run Batch Input Session          EXE     /SAPDMC/LSM_EXE_BI_SESSION_RUN
600      Frame Program for Periodic Data Transfer      EXE     /SAPDMC/LSM_EXE_INTERFACE

Similar Messages

Calling external web service from ABAP Program

Hi All,
Can somebody point me to the documentation where how to call an external (3rd party) web service from ABAP program is explained?
Thanks & Regards,
-Smita

which version of R/3 you are using. if you are on was 6.40 its very simple, there are delivered tools to generate client proxy for consuming webservice. if you are on wa 6.20 you can use cl_http_client to achieve the same. check out the following weblogs.
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Call a unix script from ABAP program

Can anybody help me on how to call a unix script from an ABAP program
Regards
Anjali

Hi try the below code
parameters : p_sfile(60) lower case
          "File to be moved
          "Eg : /home/in/SFILE1.txt
            p_dfile(60) lower case.
          "File's Destination
          "Eg: /home/archive/SFILE1.txt
data : t_btcxpm
       like btcxpm occurs 0,
       p_addparam
       like sxpgcolist-parameters.
concatenate
'/home/ABAP/scripts/Archive_file.sh'
p_sfile
p_dfile
into p_addparam separated by space.
refresh t_btcxpm. clear t_btcxpm.
call function 'SXPG_CALL_SYSTEM'
    exporting
      commandname = 'ZSHELL'
      additional_parameters = p_addparam
    tables
      exec_protocol = t_btcxpm
    exceptions
      no_permission              = 1
      command_not_found          = 2
      parameters_too_long        = 3
      security_risk              = 4
      wrong_check_call_interface = 5
      program_start_error        = 6
      program_termination_error = 7
      x_error                    = 8
      parameter_expected         = 9
      too_many_parameters        = 10
      illegal_command            = 11
      others                     = 12.
if sy-subrc = 0.
    write : /
    'File',p_sfile,'moved to',p_dfile.
else.
    write : / 'Error Occured'.
endif.

Calling Business objects Methods from ABAP program

Hi All,
Can anyone please tell me the procedure to call methods of business object(Ex: BKPF) from an ABAP program. My requirement is to check the existence of a object key by using the method EXISTENCE CHECK from BKPF. Please help

Here is an example from the SAP documentation.
[http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c5/e4ad71453d11d189430000e829fbbd/content.htm]
Cheers
Graham Robbo

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

Execute webdynpro from abap program and return to the caller program

Guys,
I have a question here.
I know there is a way to call an abap webdynpro application from normal abap program by either using a class method, or use a function module WDY_EXECUTE_IN_PLACE by providing
the webdynpro application or using CALL TRANSACTION statement.
But, is there anyways that we can call the webdynpro application from abap program by supplying data to the webdynpro and display to the user from the portal, and then
once the user do some manipulation on the data, can we transfer back the data to the caller abap program?

hey ,
you can pack any web-dynpro program in tranasaction code and run it from R/3 and not via portal :
search in " SAPTECHNICAL" how to do so - for some reason i cant post a link here
than you can use call transaction .
regards
ASA

Procedure to Call Workflow Object from ABAP program in Se38

Hi All,
I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
I have to select some records from database table.For example there are 100 records in the internal table.
For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
Please suggest me how to move forward with this scenario.
Regards
Manas Ranjan Panda

Hi,
So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
Kind regards, Rob Dielemans

Java API from ABAP program.

Hi
I have a requirement to call a Java API from ABAP program.
We are using a third party component for encrypting the files
using Java API The component consist of ".jar" files. I need to
know exactly where we need to copy the ".jar" files on application server,
so that I can call the API methods in my ABAP code and process the file in SAP,
and how to establish a connect with there server for the encryption.
Thanks
Regards
Lalith

LInk is:
/people/puru.govind/blog/2006/12/20/let-abap-speak?page=last&x-maxdepth=0

Is it possible to call website from ABAP Program?

Hi Experts,
       Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
       EXPORTING
            program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
            commandline     = URL_TABLE
            INFORM         = ''
          EXCEPTIONS
            PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
     WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call workflow from ABAP program

created a zbusiness object (ZPRODH)with
one key field product hierarchy,
one attribute level number and
one method display.
I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
In the abap program I am calling the funcion module, I
CALL FUNCTION 'SWW_WI_START_SIMPLE'
EXPORTING
TASK = TASK
IMPORTING
WI_ID = WI_ID
TABLES
AGENTS = AGENTS
WI_CONTAINER = WI_CONTAINER.
It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
Thanks in advance

ttpa,
Please check this thread:
Re: Workflow from abap program
Also check that your Fm do requires any explicit commit or not?
Hope it will help u
Cheers
Jai

Calling oracle procedure from ABAP program

There is a requirement to call the oracle stored procedure with some input parameter from ABAP program.
Suppose we have order number which is entered by the user in ABAP program.
This order number needs to be passed to oracle stored procedure as an input parameter in the same ABAP program.
We can call the oracle stored procedure without parameter using the following syntax
exec sql
execute procedure <procedure name>
end exec.
But do not know how to execute the oracle stored procedure with some input parameter?

Apologies , following is the correct code.
This will definetly solve your problem.
DATA scarr_carrid TYPE scarr-carrid.
SELECT-OPTIONS s_carrid FOR scarr_carrid NO INTERVALS.
DATA s_carrid_wa LIKE LINE OF s_carrid.
DATA name TYPE c LENGTH 20.
TRY.
    EXEC SQL.
      CREATE FUNCTION selfunc( input CHAR(3) )
        RETURNING char(20);
        DEFINE output char(20);
        SELECT carrname
               INTO output
               FROM scarr
               WHERE mandt = '000' AND
                     carrid = input;
        RETURN output;
        END FUNCTION;
    ENDEXEC.
    LOOP AT s_carrid INTO s_carrid_wa
                     WHERE sign = 'I' AND option = 'EQ'.
      TRY.
         EXEC SQL.
            EXECUTE PROCEDURE selfunc( IN :s_carrid_wa-low,
                                       OUT :name )
          ENDEXEC.
          WRITE: / s_carrid_wa-low, name.
        CATCH cx_sy_native_sql_error.
          MESSAGE `Error in procedure execution` TYPE 'I'.
      ENDTRY.
    ENDLOOP.
    EXEC SQL.
      DROP FUNCTION selfunc;
    ENDEXEC.
CATCH cx_sy_native_sql_error.
    MESSAGE `Error in procedure handling` TYPE 'I'.
ENDTRY.
Reward points if usefull.
Thanks and regards,
Veerendranath.

BRMS Connector - Calling from ABAP program

Hi,
I got some error when I changed the BRFPlus from decision table to BRMS connector when calling it from an ABAP program.
Is there any difference in the calling of those BRFs from ABAP to get the data?
Thanks!

Hi Carsten:
There are documents in SCN on how to call a BRFPlus from a webdynpro. Is the call to a BRFPlus Function from a CRM-BSP very different? I mean, in the Webdynpro documents we found in SCN, they use the terms: controller, methods and classed, which are also terms used in BSPs, hence out of our ignorance we assume there should not be much of a difference.
It is important to clarify that I am not a developer, but this is all to get an idea whether the scenario is totally different, or to know if what we are trying to accomplish is not possible, which I doubt.
Any help or link is appreciated.
Thanks,
Juan

Sending EMAIL from ABAP Program Configuration+Code(Step by step)

Dear All,
Please anybody can provide me Step by Step document for sending Email from ABAP Program.
Thanks,
RP

Not an appropriate forum. Try ABAP forum.
Regards,
Jai Shankar

Calling GUI Scripting from ABAP program

Is it possible to call GUI Scripting from ABAP and thus to use GUI Scripting as an alternative to CALL TRANSACTION?
Is the class CL_JAVA_SCRIPT suitable to access GUI Scripting engine? Accessing ABAP data object would work as well in this case as i think. What SAP Logon and WAS releases are required? Is the 6.20 release sufficient for this case?
I would appreciate if somebody could post an example.

Hi,
CL_JAVA_SCRIPT has nothing to do with SAPGUI Scripting.
Calling SAPGUI Scripting API from ABAP could be possible for programmes experienced with OLE automation calls from ABAP coding.
The hardest thing will be, to access the scripting engine handle as an entry point. Once you have a handle in your abap session, any api function can be invoked.
Best regards
Jens
BTW: SAP testtool eCATT does call SAPGUI-Scripting from ABAP.

Calling separate LSMW steps from ABAP program

Similar Messages

Maybe you are looking for