Calling SQ00 from my report program
Hi,
My requirement is to place a radiobutton on the selection screen. when user selects this radio button and execute, he should be shown the selection screen of a query defined in SQ00. So I went to SQ00 and gave the query and executed. I was show a selection screen then I went to system > status and looked at the program name. It is AQL4Z_PURCHASELUMBERPOHT==. What is the ending '=='s? I think this program is auto generated. Can I use Submit with this report program? If I use this and if the selection screen is chaged then will this program name also changes? Please suggest me or any better way to achieve this requirement. Let me know if you need more information.
thank you,
surya.
Hi Ferry,
I used it and giving me the same dump. Following is my code.
FORM open_query using l_wsid
l_bgrup
l_quold
changing l_reptname .
CALL FUNCTION 'RSAQ_REPORT_NAME'
EXPORTING
WORKSPACE = l_wsid
USERGROUP = l_bgrup
QUERY = l_quold
IMPORTING
REPORTNAME = l_reptname
CALL FUNCTION 'RSAQ_SUBMIT_QUERY_REPORT'
EXPORTING
QUERYREPORT = l_reptname
VARIANTE = ''
EXCEPTIONS
ONLY_WITH_VARIANT = 1
VARIANT_NOT_EXIST = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
submit (l_reptname). "ZFI_AGING_REPORT.
ENDFORM.
Similar Messages
-
How to call LSMW from a Report program
Hi,
I have a requirment of extending vendor master data (Companycode data and Purchasing Organization data ) through Tcode XK02 using LSMW.Also I need to generate an error log file for validating the data from flat file and must have an export option of the error log file.
Can you help me how to proceed on this in steps.
Also pls let me know how to call LSMW transaction through a Report.
Based on the selection criteria I need to maintain two source structues,one for companycode data and the other for Purchasing Orgnization data for uploading data thru LSMW.How to do this?
pls respond ASAP,
Thanks,
NagendraHi,
create 2 LSMW object (under same project and subproject)..
one for extended vendor master data for company code data and other for extended purchase organization data for company code data.
Now check the radio buttons and based on that populate ur LSMW object.
Store project
project = < >.
Store subproject
subproj = < >.
Store object
object = '6GSC022_TS3'.
if r_ccode = 'X'.
Store object
object = < >.
else.
Store object
object = < >.
endif.
Call the function module to display object (LSMW) maintenance screen
CALL FUNCTION '/SAPDMC/LSM_OBJ_STARTER'
EXPORTING
project = project
subproj = subproj
object = object
EXCEPTIONS
no_such_object = 1
OTHERS = 2.
Generating error log:
After the checking the field if u think for this u need to generate error message then In the Maintain Field Mapping and Conversion Rules option under the required field write the following code:
data: v_msgtxt(100) type c.
message <msg ID> <message type> <message no>
with <var1> <var2>
into v_msgtxt.
write v_msgtxt.
Follow the next step in LSMW object till you reach the option Convert Data.
After you execute this option you will get the desired message here.
Regards,
Joy. -
Can we call a bdc from a report program?
hi
Can we call a bdc from a report program?
Thanks
RamaHello,
Yes..
Check this example:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA : L_EBELN TYPE EKPO-EBELN,
L_EBELP TYPE EKPO-EBELP.
DATA : L_DATE1 TYPE SY-DATUM,
L_DATE2 TYPE SY-DATUM,
L_YEAR(4),
L_MONTH(2),
L_DATE(2).
DATA: L_AMOUNT1 LIKE RK40C-WTGBTR.
DATA: L_POSID_OLD TYPE PS_POSID.
DATA: L_POSID_NEW TYPE PS_POSID.
DATA: LS_COBK LIKE COBK.
DATA: LT_ITEMS LIKE RK40C OCCURS 0 WITH HEADER LINE,
LT_COEP LIKE COEP OCCURS 0 WITH HEADER LINE,
LT_COEPL LIKE COEPL OCCURS 0 WITH HEADER LINE,
LT_COEPR LIKE COEPR OCCURS 0 WITH HEADER LINE,
LT_MESG LIKE MESG OCCURS 0 WITH HEADER LINE.
DATA: LV_NUM TYPE POSNR_ACC VALUE '1'.
DATA: CD_SEND_REC_REL LIKE COHEADER-SEND_REC_REL,
LD_STATUS LIKE RK23F-STATUS.
DATA: L_DYNNR LIKE FELD-DYNNR.
CLEAR : L_DATE,L_DATE1,L_DATE2,L_YEAR,L_MONTH.
L_DATE1 = SY-DATUM.
L_YEAR = L_DATE1(4).
L_MONTH = L_DATE1+4(2).
L_DATE = L_DATE1+6(2).
CONCATENATE L_DATE L_MONTH L_YEAR INTO L_DATE2 .
CASE R_UCOMM.
WHEN '&IC1'. "doubleclick
CHECK RS_SELFIELD-FIELDNAME = 'EBELN'.
READ TABLE G_T_FINAL INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
READ TABLE G_T_TEMP WITH KEY LOGNUM = G_T_FINAL-LOGNUM.
IF SY-SUBRC = 0.
MESSAGE I899(KB) WITH TEXT-004.
ELSE.
CLEAR : L_EBELN,L_EBELP,LS_COBK,LT_ITEMS,G_T_BDC,G_T_MESSAGE,
CD_SEND_REC_REL,LD_STATUS.
REFRESH: LT_ITEMS,G_T_BDC,G_T_MESSAGE.
SET PARAMETER ID 'BES' FIELD G_T_FINAL-EBELN.
GET PARAMETER ID 'BES' FIELD L_EBELN.
SET PARAMETER ID 'BSP' FIELD G_T_FINAL-EBELP.
GET PARAMETER ID 'BSP' FIELD L_EBELP.
SORT G_T_FINAL BY EBELN EBELP.
READ TABLE G_T_FINAL WITH KEY EBELN = L_EBELN
EBELP = L_EBELP
BINARY SEARCH.
IF SY-SUBRC = 0.
LS_COBK-KOKRS = G_T_FINAL-KOKRS.
LS_COBK-GJAHR = SY-DATUM+0(4).
LS_COBK-VRGNG = 'RKU1'.
LS_COBK-PERAB = SY-DATUM+4(2).
LS_COBK-PERBI = SY-DATUM+4(2).
LS_COBK-BLDAT = SY-DATUM.
LS_COBK-BUDAT = SY-DATUM.
LS_COBK-CPUDT = SY-DATUM.
LS_COBK-USNAM = SY-UNAME.
LS_COBK-WSDAT = SY-DATUM.
LS_COBK-KURST = 'M'.
LS_COBK-VARNR = '05SAP'.
LS_COBK-KWAER = G_T_FINAL-WAERS.
LS_COBK-CPUTM = SY-UZEIT.
CLEAR : L_POSID_OLD,L_POSID_NEW.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_INPUT'
EXPORTING
INPUT = G_T_FINAL-POSID_NEW
IMPORTING
OUTPUT = L_POSID_NEW.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_INPUT'
EXPORTING
INPUT = G_T_FINAL-POSID_OLD
IMPORTING
OUTPUT = L_POSID_OLD.
L_AMOUNT1 = G_T_FINAL-AMOUNT.
LT_ITEMS-ZLENR = LV_NUM.
LT_ITEMS-EPSPNR = L_POSID_NEW.
LT_ITEMS-SPSPNR = L_POSID_OLD.
LT_ITEMS-KSTAR = G_T_FINAL-KSTAR.
LT_ITEMS-WAERS = G_T_FINAL-WAERS.
LT_ITEMS-WTGBTR = L_AMOUNT1.
LT_ITEMS-WKGBTR = L_AMOUNT1.
APPEND LT_ITEMS.
CLEAR: LT_ITEMS.
* For reposting the Cost
CHECK NOT LT_ITEMS[] IS INITIAL.
CALL FUNCTION 'K40C_COBK_CHECK_POST'
CHANGING
ITCOBK = LS_COBK
EXCEPTIONS
PERIOD_BLOCKED = 1
EXTERNAL_NUMBER_MISSING = 2
ERROR_OCCURED = 3.
IF SY-SUBRC IS INITIAL.
CALL FUNCTION 'K40C_DOCUMENT_LINE_CHECK'
EXPORTING
DOC_HEADER = LS_COBK
IGNORE_WARNINGS = 'X'
TABLES
DOC_ITEMS = LT_ITEMS.
*...Create Tables for database
CALL FUNCTION 'K40C_DOCUMENT_CREATE'
EXPORTING
DOC_HEADER = LS_COBK
TABLES
DOC_ITEMS = LT_ITEMS
ITCOEP = LT_COEP
ITCOEPL = LT_COEPL
ITCOEPR = LT_COEPR.
CALL FUNCTION 'K40C_DOCUMENT_POST'
TABLES
ITCOEP = LT_COEP
ITCOEPL = LT_COEPL
ITCOEPR = LT_COEPR
CHANGING
DOC_HEADER = LS_COBK.
ENDIF.
ENDIF.
IF SY-SUBRC = 0.
GET PARAMETER ID 'KBXXN_P_VAR_RKU1' FIELD CD_SEND_REC_REL.
GET PARAMETER ID 'KBXX_START_DYNPRO' FIELD LD_STATUS.
IF CD_SEND_REC_REL IS INITIAL AND LD_STATUS IS INITIAL.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'COHEADER-SEND_REC_REL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=PVAR'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'L'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RK23F-STATUS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=LISI'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ENDIF.
IF CD_SEND_REC_REL EQ '05SAP' AND LD_STATUS EQ 'S'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ELSEIF CD_SEND_REC_REL EQ '05SAP' AND LD_STATUS EQ 'L'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' L_DYNNR.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RK23F-STATUS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=LISI'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ELSEIF CD_SEND_REC_REL NE '05SAP' AND LD_STATUS EQ 'S'.
CASE CD_SEND_REC_REL.
WHEN '01SAP' OR '02SAP' OR '04SAP' OR '08SAP' OR '09SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
WHEN '03SAP' OR '07SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1230' .
WHEN '06SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1210'.
WHEN '10SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1270'.
ENDCASE.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' L_DYNNR.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'COHEADER-SEND_REC_REL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=PVAR'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM BDC_FIELD USING 'RK23F-WAERS'
'EUR'.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ELSEIF CD_SEND_REC_REL NE '05SAP' AND LD_STATUS EQ 'L'.
CASE CD_SEND_REC_REL.
WHEN '01SAP' OR '02SAP' OR '04SAP' OR '08SAP' OR '09SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1220'.
WHEN '03SAP' OR '07SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1230' .
WHEN '06SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1210'.
WHEN '10SAP'.
CLEAR L_DYNNR.
L_DYNNR = '1270'.
ENDCASE.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'COHEADER-SEND_REC_REL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=PVAR'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'L'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM BDC_DYNPRO USING 'SAPLK23F1' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RK23F-STATUS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=LISI'.
PERFORM BDC_FIELD USING 'COHEADER-SEND_REC_REL'
'05SAP'.
PERFORM BDC_FIELD USING 'RK23F-STATUS'
'S'.
PERFORM BDC_FIELD USING 'COHEADER-BLDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-BUDAT'
L_DATE2.
PERFORM BDC_FIELD USING 'COHEADER-PERIO'
L_MONTH.
PERFORM FILL_BDC_SCREEN USING L_DYNNR L_DATE2 L_MONTH.
ENDIF.
CALL TRANSACTION 'KB11N' USING G_T_BDC MODE G_MODE MESSAGES
INTO G_T_MESSAGE.
IF NOT G_T_MESSAGE[] IS INITIAL.
READ TABLE G_T_MESSAGE WITH KEY MSGTYP = 'S'.
IF SY-SUBRC = 0.
DELETE FROM BALHDR WHERE LOGNUMBER = G_T_FINAL-LOGNUM AND
OBJECT = G_T_FINAL-OBJECT AND
SUBOBJECT = G_T_FINAL-SUBOBJECT.
COMMIT WORK.
G_T_TEMP = G_T_FINAL.
APPEND G_T_TEMP.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
CLEAR G_T_MESSAGE.
REFRESH G_T_MESSAGE.
*refresh g_t_bdc.
CLEAR G_T_BDC.
REFRESH G_T_BDC.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND
Vasanth -
Call tcode from alv report and passing group of values
hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank youDear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM -
Create a url from a report program
Hi All,
Could anyone please suggest me how do i generate a url from a report program. I need to use this generated url then, as a link in an excel sheet.
Thanks in advance,
Warm Regards,
Preethi.Hi Preethi,
REPORT ZAZUURL .
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
commandline = URL_TABLE
INFORM = ''
EXCEPTIONS
PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
<b>Regards,
Azhar</b> -
Trigerring Outbound XI interface from a report program
Hi All,
I have scenario which requires an outbound interface to be triggered from a report program.
I followed the approach given in
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
when i am excuting the report program and checked in the sxmb_moni for the status of the message, even though the payload is ok, but the status of the message is failed with msg saying Reciever is not configured.
Since i have only one Outbound interface, so while configuring the integration builder, i can only specify the name for outbound interface but it asks for even inbound interface which i don't have?
Can you please suggest the soultion?
Regards,
Kulwant SinghDear kulwant,
From report there are 2 ways of trigerring messages to XI.
Method 1:(busines system running on web as>=6.20
Create proxy for your outbound interface, it generates proxy class in your local IE system(Business system).
once the proxy is generated, you can test it.select the class & click on exucute button located on menu bar.
fill the values and say execute,(for ASyn only).
<b><u>Calling in report</u></b>
Then call the proxy class in your report and fill the values
for ASN: EXECUTE_ASYNCHRONOUS
FOR SYN: EXECUTE SYNCHRONOUS.
Method 2: business system running or 4.6/47 webas in not there
You need to create RFC import the RFC in IR use it as MI(Outbound/syn/asn)
Use the program ID created for RFC communication channel, and create a TCPIP
connection in your business system and use the program id as registerd server program.
Then call the RFC in your report program.
it will work.
regards
chandra -
Calling servlet from a java program
Hi
I need to call a servlet's doPost() method from a java program. I have a specific situation, where I need to call servlet from a java program. DUring this call I need to pass a file and two string to the servlet. Servelt after receiving the file and string uploads the file to the server at a specified location. I am stuck up as how to call servlet from a java program instead of a HTML or JSP.
Can anyone help me to start with this.
any suggestion is welcome.You have to establish a URLConnection with servlet from your java program.
URL servletURL = new URL("http://localhost:8080/Myservlet?str1=abc&str2=def");
URLConnection servletConnection = servletURL.openConnection();you can get the objectOutputStream
ObjectOutputStream oos = new ObjectOutputStream (servletConnection.getOutputStream());
oos.writeObject(your file object);-------------------------------------------------
In the servlet u can get the strings using request.getParameter("str1");
In the servlet u can get the strings using request.getParameter("str2");
file = new ObjectInputStream (request.getInputStream()).readObject()a lot of resources are available on this ...
hope this helps :) -
How to pass values to a module pool program from another Report Program
Hi ..
Please let me know how I can pass values to a MODULE POOL selection screen field from another Report Program.
Thanks
RKhttp://help.sap.com/saphelp_nw04/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/frameset.htm
a® -
I want to execute a BSP from ABAP report. The BSP is the standar CRM CASE MANAGEMENT BSP.
I have a CRM CASE list in ABAP report and when I make double-click on one case i want to call BSP to show this case. I don't want to execute the GUI transaction CRMD_CASE. I need to execute the BSP.Hello Ivan,
To call the BSP from the ABAP report following thread will be helpful for you.
Call BSP from SE38 Program ?
Regards
Aashish Garg
Message was edited by:
aashish garg -
How to pass variable value into module pool scren from a report program
Hi,
I have created a report program with selection screen parameters. when the inputs are filled and executed it generates the purchase evaluation sequence number. i have created a screen and passed that number to display on it with print option and back option buttons as required. but variable alone is not getting passed from the program to module pool screen. buttons are working fine. value alone is not coming. can anyone please help me.
regards,
sudha.Hi ,
you need to declare that variable param at Global.
sample code...
report xyz....
data: g_no type ekko-ebeln.
start-of-selection...
g_no = '12345'.
call screen 0100. -
Triggering smartform output from the report program
Hi,
I have developed a new report program.The selection screen of the report program is like this.
plant: ________
warehouse: ___________
sheet #: _________ to _________
bay/bin: ___________ to __________
building: ___________ to __________
counter sheet printer: __________
Auditor sheet printer: _________
When the data for sheet#,bay,building, counter sheet printer is given,then the counter sheet smartform has to be output on the screen.
or
When the data for sheet#,bay,building, auditor sheet printer is given,then the auditor sheet smartform has to be output on the screen.
Is it pessible to trigger the smartform from the selection screen of the report.If so can anyone send me a sample code for that.CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = <smartform name>
IMPORTING
fm_name = v_form_fm
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
Call Smartfrom to print the document
CALL FUNCTION v_form_fm
EXPORTING
p_compensation = p_comp <--parameter list
p_skill = p_skill
p_deci_auhtority = p_da
TABLES
s_job = s_job <--select option list
s_level = s_level
s_date = s_date
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
declare the paramters of your selection screen in the form interface section of the smartform.
If you have a parameter in teh selection screen then declare it in the smartform as:
P_matnr TYPE matnr (in form interface -
>import)
If you have a select option then
S_LEVEL LIKE <dictionary structure like a range>
this u declare it in the tables section of the form interface. For the select option , the dictionary sructures should be like a range (see RNGE_OBJID as an example). If you dont have a dictionary structure
then u need to declare it in the dictionary.
REWARD IF HELPFUL -
How to call Outbound interface using report programs
Hi experts,
i want to call outbound i/f prog using 2 report programs...one report prg passing 2 parameters to outbond i/f prg & another report prg simply calling the outbond i/f prg... either report1 or report2 call this outbond i/f prg.
for instance,
1.report1 has following parameters
param: tknum,vbeln
2.report2 does not have any parameters
No param
3.outbound i/f prog for some calculation
points will be given..............
thanks in advance,
regards
vijayHi vijay,
To call a program in another program you have to use the Keyword <b>Submit</b>.
EX; Report zprg.
SUBMIT zprg1.
So, where you require a program you can call that program by this keyword.
Regards,
Narendra. -
Can we call screen from ALV report
Hi All,
I am in the process of creating a stand alone application. However I have stuck up here.
Problem: Can we call any screen from ALV report? If yes then how??? Can anyone give some code snippet??
All your help appreciated.
Thanks,
JigneshHello Jignesh,
Here is an example, when you double click on a line, it pops with with another screen that holds details for the flight information.
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click FOR EVENT double_click
OF cl_gui_alv_grid
IMPORTING e_row
e_column.
ENDCLASS. "lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
READ TABLE it_flight INTO wa_flight INDEX e_row-index.
IF sy-subrc EQ 0.
SELECT * FROM sbook
INTO TABLE it_book
WHERE carrid EQ wa_flight-carrid AND
connid EQ wa_flight-connid.
CALL SCREEN 101 STARTING AT 10 10.
ENDIF.
ENDMETHOD. "HANDLE_DOUBLE_CLICK
ENDCLASS. "LCL_EVENT_HANDLER
MODULE status_0101 OUTPUT.
Variant to save the layout
gv_repid = sy-repid.
IF g_custom_container2 IS INITIAL.
Create an instance for Custom Container 'ALV_GRID'
CREATE OBJECT g_custom_container2
EXPORTING container_name = gs_container2.
Create an instance for ALV Grid
CREATE OBJECT g_grid2
EXPORTING i_parent = g_custom_container2.
Variant to save the layout
gs_layout-grid_title = 'Flight Bookings'.
CALL METHOD g_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'SBOOK'
is_layout = gs_layout
CHANGING
it_outtab = it_book[].
ELSE.
CALL METHOD g_grid2->refresh_table_display.
ENDIF. "IF grid2 IS INITIAL.
Setting focus for created grid control
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = g_grid2.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " status_0101 OUTPUT
Refer to BC_ALV_GRID04 for ALV data declarations used in the above piece of code. -
Help with calling packages from crystal reports
hi I am trying to call a package from crystal reports, but geting an error
Failed to open a rowset
4200:datadirect:odbcdriver:odbc oracle driver: unrecognised escape sequence.
im sure its somthing realy stupid im doing wrong any ideas????
the command in crystal is
{CALL Enhanced_Pharos_Report.run_report
(NVL({?var_detail_id},0))}
the package, which works as a stand alone object is
----------spec------------------
create or replace package Enhanced_Pharos_Report
AS
TYPE result_set_type IS REF CURSOR;
PROCEDURE run_report
(var_detail_id NUMBER, v_Media_Object_Name out varchar2);
end;
-----------body-----------------------
create or replace package body Enhanced_Pharos_Report as
v_Media_Object_Name varchar2(300);
function Media_Object_Name(var_Detail_id Number) return varchar2 as
Result varchar2(300);
begin
SELECT promo_name
INTO Result
FROM promo
WHERE promo_id = (SELECT promo_id
FROM promo_plan
WHERE promo_plan_id = (SELECT promo_plan_id
FROM event_promotion
WHERE detail_id = var_Detail_id));
return(Result);
end Media_Object_Name;
PROCEDURE run_report
(var_detail_id NUMBER, v_Media_Object_Name out varchar2)
is
begin
v_Media_Object_Name := Media_Object_Name (var_detail_id);
end;
end;Are you able to view your report on the browser in the format:
http://myserver:portno/report_name.rpt -
How to Pre fill the screen XD01/XD02, from the report program
Hello,
I have a requirment where i have to pass the screen values for the genral view of the tcode XD01/XD02,
For example : In my report program i get the Name, City, Country, PIN etc.. now my requirement is that the First Screen(Genral view) of the XD01 is pre filled with all the values that are passed from the Program and the user can continue after that.
Please suggest a way to achieve the mentioned functionality .
Regards,
AbhinavThanks
But the screen fields that i have to fill don't have parameter id's ..and i dont want to open the object by access key.
also my requirement is to leave to the transaction with the filled screen field .from the report prog...so when i use BDC i get the OK code , that i want to avoid.
Maybe you are looking for
-
BAPI returns less number of records when called from WebDynpro
Hi, We have a BAPI which updates some tables and then bring back output in the form of a table. When we execute BAPI from R/3 we get all records. When we execute the BAPI using webdynpro, for the same input values, we are always getting 22 records. T
-
Problem Experts OWB 10gR2 - Mapping with OMB - Give a name to the flat file
I'm trying to create a mapping in OWB by using the Experts (OMB), where the data source is a database table and the target is a flat file (to transform a table to a flat file). The tasks of my Experts : This task create a mapping, and add a existing
-
Should I use flex for my website
Hey, I am having trouble figuring out if I should be using flex for a site similar to the BBC site: http://www.bbc.co.uk. I have started the site in flex but I am running into a lot of problems. It could be that I am a newbie to Flex, but wanted to m
-
How to validate the age of a person. I have two fields one is birth day field where one enters the birth date. And other one is some other date field say Join Date. And also there is one more field age field. The user enters his age. But I want to va
-
I have a class which has public members and another class which directly access the first class's members. Now i want to change my first class in such a way that all its variables are private which has to be accessed by any other class using getters