Calling-station-id has nothing
I am using cisco 7206 VXR as pptp server with radius aaa, everithing work exept that router doesn't send to radius attribute Calling-station-id that should contain IP adress of connecting client (I need that for authorization check).
I'm using Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 12.4(11)T2, RELEASE SOFTWARE (fc4)
Thanks, but that doesn't help.
By the way, i'm not needed exacly Calling-station-id. I can accept any posobility to send client IP to radius.
What can I try more?
Similar Messages
-
Why Calling-Station-Id [31] attribute has an "async" value??
AS5350, IOS tried 12.4(4T) and 12.4(3b).
Cisco configured as dial-up server. When subscriber connects to some SPE via usual modem using radius authentication, his callback number may not be determined. Then I see in radius debug, that:
RADIUS: Calling-Station-Id [31] 7 "async"
When I used ios 12.3(3a) in that case i saw a blank field instead of "async".
When callback number is determined i see, i.e.:
RADIUS: Calling-Station-Id [31] 12 "3272779467"
What does "async" mean? Why exactly this? How to cut this async off?It doesn't matter what RADIUS I am using. Records are sent by cisco to radius. And after IOS changing these records changed.
If you think it's too important, my radius is self-made by RASTEL company. That company says that curve records are seen from cisco... -
Called-Station-ID attribute and Cisco WLC code 7.4
Hello
I have 2 WLCs configured with 2 SSIDs (one is [WPA2][Auth(802.1X)] and the other is Web-Auth). One of the WLCs is remote and its WLANs are configured with mobility anchors pointing to the other WLC. Both WLCs are configured with Called-Station-ID set to AP Mac Address:SSID. I use this attribute on ACS to authenticate/authorize users based on what SSID they connect to.
This worked fine on WLC code 7.0 but on upgrading to 7.4 I started having some issues:
clients on the remote WLC can still authenticate on the [WPA2][Auth(802.1X)] SSID as the Called-Station-ID attribute is still AP Mac Address:SSID
clients on the remote WLC cannot authenticate on the Web-Auth SSID as the Called-Station-ID attribute now appears to be the Mac Address of the WLC anchor controller
WLC models are 5508 and current code is 7.4.110.0 (APs are AIR-LAP1142N-E-K9). Can anyone tell me why I'm seeing this behaviour on the Web-Auth SSID on the remote WLC?
Thanks
AndySince you have two AAA devices that's sending info, you can have your policy for the guest specifying the guest WLC. The SSID policy for the foreign WLC is only really needed if you have multiple 802.1x authentication from the foreign WLC and that's when you can use the regex to defiance the SSID per AD Group.
Look at a successful authentication from one of the guest users. Look at the detailed log and then in that log, you will see all the attributes being sent that the radius can send back to the WLC. You can use any of those attributes in your policies.
Called-Station-ID might not be sent like what your use to, because the foreign WLC has the access point the guest user associates to and tunnels it back to the anchor WLC. So this attribute might not be available. Things do change with code versions so you might just have to adjust your policies. I haven't played around with 7.0.x code with guest anchor and radius in a while, but I have in the past upgraded radius or the WLC and had to tweak my radius policies.
Sent from Cisco Technical Support iPhone App -
Same thing here. I'm getting very frustrated. When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens. Then I try to end the call and hit the END button. Sure, it looks like the call disconnected, but as soon as I try to make another call, I see the same screen (the first called) and the words "calling mobile". The only way I can rememdy this, naturally, is powering off and restarting. But, c'mon...$300 for a phone that you have to power down between calls???
I've got the latest OS update, no jailbreak, or anything exotic on my 4s. What's more, when I try to make a call 2 out of 3 times, the dumb SIRI opens up and stops me from making the call. (and, yes, I have very carefully checked my process that I am not intentionally activating SIRI with my cheek.)
Again, $300 for all this in just trying to make a call?reset your phonr by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
when i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs. Take in mind this is my first time to sync with this laptop(HP 15 ENVY) and as well my laptop is just brand new. just got it a week ago. so how do i fix this prob. and also when i open my itunes store and then view my account it says error occurred either debug it through Microsoft visual studio or close program. I tired copying all the .dll files to the itunes folder didn't help
I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535
-
I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
can no longer find my music and apps on itunes and when i try to sync it tells me its going to erase all that is in my phone and sync the new itunes which has nothing in it
See Empty/corrupt library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2 -
My computer's hardrive went bad an I had to get a new one. Now my computer has nothing on it and I had to reinstall itunes and i have no music or anything. So now I cannot sync my ipod or anything. Is there anything i can do to get all of my stuff back?
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back. -
On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help
You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes. -
i am trying to download a movie onto my brand new ipod that has nothing on it. it is a 8gb ipod and the movie is 3.4 gb. halfway through it tells me there is no more space to download the movie. how do i fix this?
Go to the Store tab in iTunes and click on the Check For Available Downloads.
-
The USB cord needed to transfer photos from my iPhone 5 to Windows XP has nothing to do with the charging cord which appears to have an USB 'end', but apparantly is not, as it will not fit into any USB port on my PC?
An iPhone 5 comes with a single cable. It is a USB to Lightning connector cable that is used for charging, for syncing, and for transferring photos from the Camera Roll to your computer. There is no separate cable for charging.
-
I put something in the search bar such as "making centerpieces for baby shower" or I put it into google. Then a bunch of matches come up, I click on one that looks good, but immediately it goes to "re-direct" and a web site comes up that has nothing at all to do with the search like an auto shop or something.
I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
What happens if you uncheck rulers from top view options ?
Thanks,
Sanjit -
The new tab goes to a website that has nothing to do with the site I am working with.
hello, this sounds like a problem possibly caused by malware on your pc. please go to ''firefox > addons > extensions'' & remove any suspicious entries (toolbars, things that you have not installed intentionally, don't know what purpose they serve, etc). also go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[Troubleshoot Firefox issues caused by malware]] -
My Maxx HD keeps dropping calls and always has very little signal
My maxx hd keeps dropping calls and always has very little signal.
AngelMunoz2011,
I am sorry to hear about your troubles with service on your phone. We definitely want to make sure that you are always receiving the best service options. What zip in general are you having the most trouble in? How many bars of signal are you typically getting? Could you try clearing the cache on your device http://vz.to/KRifEf and also try removing/reinserting your 4g sim card. We are here to help, so please keep us updated.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport -
I am trying to sync my iphone 4s to my windowns Itunes account. When i try to do it, the sync wants to remove all of the content on my phone and replace it with what is on my laptop, which has nothing yet. I am trying to move all of my purchased and uploaded content from my phone to the computer, but don't see the setting to do that.
Have you tried contactint the app's developer?
Maybe you are looking for
-
Getting oracle.xml.parser.v2.XMLParseException: Start Of root Element
Hi All, I am getting below error while creating STUB/Skeleton in Jdeveloper to call a web service from OAF Page But getting below error while trying to creating Stub/Skeleton to call weservice ERROR: oracle.xml.parser.v2.XMLParseException: Start Of r
-
What is the significance of using Prepack or Display Articles
What means 'significanc'e here? difference between prepack or display article? or the business use when to go for a structured artice at all? [(1) The difference between prepack or display articles are described in the online documentation SAP Retail
-
Hi friends, I am running payment run and system when generates checks, it creates checks with european format (DD.MM.YYYY)for vendors of china, UK but for US vendors its in US format(MM/DD/YYYY) Is there a way in SAP we can make it similar for all ve
-
Problems in BW Report from a Transact Cube feed from SEM BPS
Hi, I created a Transactional Infocube in BW with 5 characteristics and 2 ratios. After that in the Planning Workbench, I Created a Planning Area, Planning Level, Planning Package, Manual Planning and a Delete Planning Function (That erase the select
-
How to handle Fact tables with different granularity in OBIEE 11g RPD
Hello Everyone, I have got stuck here and need your help. I have two fact tables (Say F1 and F2... F1 is containing data at month-level and F2 is containing data at day level) and one Date DIMENSION TABLE. Date_Code is the PK of Date dimension table.