Calling stored procedure from within container TX

Hi
I am calling a stored procedure that resides locally (Oracle) from within a session
bean after updating a number of ejb's. The stored procedure works fine if it performs
a simple delete. However, the stored procedure is in turn calling another stored
procedure that may reside in a different db. In such a case the update to the
ejb's in not reflected at all. Is this possible to do this within one tx? BTW
there is a reason I'm not calling the remote SP directly.
Thanks

Hi,
I am not sure if I fully understand your question, but here is a list of points which you
should check:
- transaction boundaries
- transaction isolation level
- XA datasources and drivers
- are the changes from the SP commited properly to the database ?
- also note that WLS5.1 (if you are using it ?) supports 2 phase commit only with a
single datasource
Regards,
Christian Buchegger
Developer Relations Engineer
BEA Support
Michael schrieb:
Hi
I am calling a stored procedure that resides locally (Oracle) from within a session
bean after updating a number of ejb's. The stored procedure works fine if it performs
a simple delete. However, the stored procedure is in turn calling another stored
procedure that may reside in a different db. In such a case the update to the
ejb's in not reflected at all. Is this possible to do this within one tx? BTW
there is a reason I'm not calling the remote SP directly.
Thanks

Similar Messages

Calling Stored Procedure from Oracle DataBase using Sender JDBC (JDBC-JMS)

Hi All,
We have requirement to move the data from Database to Queue (Interface Flow: JDBC -> JMS).
Database is Oracle.
*Based on Event, data will be triggered into two tables: XX & YY. This event occurs twice daily.
Take one field: 'aa' in XX and compare it with the field: 'pp' in YY.
If both are equal, then
if the field: 'qq' in YY table equals to "Add" then take the data from the view table: 'Add_View'.
else if the field: 'qq' in YY table equals to "Modify" then take the data from the view table: 'Modify_View'.
Finally, We need to archive the selected data from the respective view table.*
From each table, data will come differently, means with different field names.
I thought of call Stored Procedure from Sender JDBC Adapter for the above requirement.
But I heard that, we cannot call stored procedure in Oracle through Sender JDBC as it returns Cursor instead of ResultSet.
Is there any way other than Stored Procedure?
How to handle Data Types as data is coming from two different tables?
Can we create one data type for two tables?
Is BPM required for this to collect data from two different tables?
Can somebody guide me on how to handle this?
Waiting eagerly for help which will be rewarded.
Thanks and Regards,
Jyothirmayi.

Hi Gopal,
Thank you for your reply.
>Is there any way other than Stored Procedure?
Can you try configuring sender adapter to poll the data in intervals. You can configure Automatic TIme planning (ATP) in the sender jdbc channel.
I need to select the data from different tables based on some conditions. Let me simplify that.
Suppose Table1 contains 'n' no of rows. For each row, I need to test two conditions where only one condition will be satisfied. If 1st condition is satisfied, then data needs to be taken from Table2 else data needs to be taken from Table3.
How can we meet this by configuring sender adapter with ATP?
================================================================================================
>How to handle Data Types as data is coming from two different tables?
If you use join query in the select statement field of the channel then whatever you need select fields will be returned. This might be fields of two tables. your datatype fields are combination of two diff table.
we need to take data only from one table at a time. It is not join of two tables.
================================================================================================
Thanks,
Jyothirmayi.

How to use @jws:sql call Stored Procedure from Workshop

Is there anyone know how to use @jws tag call Sybase stored procedure within
Workshop,
Thanks,

Anurag,
Do you know is there any plan to add this feature in future release? and
when?
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
In the current release, we do not support calling stored procedures from a
database control. You will have to write JDBC code in the JWS file to call
stored procedures.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Anurag,
I know how to use DB connection pool and create a db control with it. In
fact, we have created a Web Service with the db control using plain SQL
in
@jws:sql. However, my question here is how to use @jws tag in Weblogic
Workshop to create a Web Services based on Sybase stored procedure orany
Stored Proc not plain SQL.
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
You can use a database control to obtain a connection from any JDBC
Connection Pool configured in the config.xml file. The JDBC Connectionpool
could be connecting to any database, the database control is
independent
of
that.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Is there anyone know how to use @jws tag call Sybase stored
procedure
within
Workshop,
Thanks,

Calling stored procedure from EJB in JSever

I have some trouble to call stored procedure from EJB deployed to JServer on Oracle8i (815).
I have been able to sucessfully test the stored procedure using thin client JDBC driver. But when I user the default connection in JServer, the stored procedure never got called. Is there any restriction of EJB in JServer?
Thanks
null

Thanks man! that was a great help. looks like i am almost there. i created those items t obe hidden.
now i am passing three parameters to the procedure. my url for that column value looks like this,
javascript:P65_PARTITION_ID=#PARTITION_ID#;P65_DBC=#DBC#;P65_FILE_ID=#FILE_ID#;doSubmit('Sku_Save');
the #DBC# parameter is a name of the person that has spaces(firstname lastname). i am getting a javascript error saying,
Line: 1
Char: 37
Error:Expected ';'
i see that char 37 is the space after firstname.
any idea how i should get rid of this error.
Also, as you have been very helpful, a question further beyond :). the above procedure will return a OUT varchar parameter. i guess i have to create another item for that. how do i read it and display just below my report as text.
Thanks Again!

Invoking Oracle stored procedures from within a JDBC channel for PI 7.1

Hi ,
Can anybody tell me that is it possible to invoke Oracle stored Procedure from within a JDBC sender channel for PI 7.1.
Its working in XI3.0 and XI 7.0 for Oracle DBMS versions >= 10.2.x. But I am not sure,whether it will work for PI 7.1 also.
Thanks & Regards,
Saru

HI,
refer below link,there is no much difference in PI7.1 ,executing stored procedure is same .
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b72b2fde93673e10000000a114a6b/content.htm
Regards,
Raj

Calling stored procedure from DAC

Anyone has instructions on calling stored procedures from DAC. If I had a stored procedure called gary.refresh, where would I put that in the DAC. How do I specify the database that my stored procedure is in.. There doesn't seem to be any examples of this in the documentation for DAC administration
Edited by: user8092687 on Jun 6, 2011 7:51 AM

You have 3 options.
Option 1:
Create an SQL file that runs the stored proc. For instance, if
your stored proc is called "aggregate_proc" you would create a
file called aggregate_proc.sql that has the syntax to run the
stored proc. Put the file in the CustomSQLs directory that hangs
off the DAC main directory. Then, in the DAC, create a new task
(Execution Type = SQL File). The command for Incremental Load
would be aggregate_proc.sql.
Option 2:
Create an Informatica mapping (and corresponding workflow) that
runs the stored proc. Then create a DAC task (Execution type Informatica) that runs the workflow.
Option 3 :
Directly mention Schema.procedure name in the DAC task
Hope this helps,
- Amith

How to call stored procedure from Pro*C

How to call stored procedure from Pro*C ?
my system spec is SuSE Linux 9.1, gcc version : 3.3.3, oracle : 10g
my Pro*C code is the following..
EXEC SQL EXECUTE
begin
test_procedure();
end;
END-EXEC;
the test_procedure() has a simple update statement. and it works well in SQL Plus consol. but in Pro*C, there is a precompile error.
will anybody help me what is the problem ??

I'm in the process of moving C files (with embedded SQL, .PC files) from Unix to Linux. One program I was trying to compile had this piece of code that called an Oracle function (a standalone), which compiled on Unix, but gives errors on Linux:
EXEC SQL EXECUTE
BEGIN
:r_stat := TESTSPEC.WEATHER_CHECK();
END;
END-EXEC;
A call similar to this is in another .PC file which compiled on Linux with no problem. Here is what the ".lis" file had:
Pro*C/C++: Release 10.2.0.1.0 - Production on Mon Jun 12 09:26:08 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Error at line 193, column 5 in file weather_check.pc
193 BEGIN
193 ....1
193 PCC-S-02346, PL/SQL found semantic errors
Error at line 194, column 8 in file weather_check.pc
194 :r_stat := TESTSPEC.WEATHER_CHECK();
194 .......1
194 PLS-S-00000, Statement ignored
Error at line 194, column 18 in file weather_check.pc
194 :r_stat := TESTSPEC.WEATHER_CHECK();
194 .................1
194 PLS-S-00201, identifier 'TESTSPEC.WEATHER_CHECK' must be declared
Pro*C/C++: Release 10.2.0.1.0 - Production on Mon Jun 12 09:26:08 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /oracle_client/product/v10r2/precomp/ad
min/pcscfg.cfg
Error at line 194, column 18 in file weather_check.pc
:r_stat := TESTSPEC.WEATHER_CHECK();
.................1
PLS-S-00201, identifier 'TESTSPEC.WEATHER_CHECK' must be declared
Error at line 194, column 8 in file weather_check.pc
:r_stat := TESTSPEC.WEATHER_CHECK();
.......1
PLS-S-00000, Statement ignored
Semantic error at line 193, column 5, file weather_check.pc:
BEGIN
....1
PCC-S-02346, PL/SQL found semantic errors

How to call a procedure from within another procedure?

What's the syntax to call a procedure from within a procedure.
I have a procedure z(user_id IN number, ....)
then
procedure a (user_id IN number, ....)
procedure b (user_id IN number, ....)
procedure c (user_id IN number, ....)
I want to call procedure a, b, c from inside procedure z.
How would I do that?

Same way :
SCOTT@db102 SQL> create or replace procedure a (p1 in varchar2) is
2 begin
3     dbms_output.put_line (p1);
4* end;
SCOTT@db102 SQL> /
Procedure created.
SCOTT@db102 SQL> create or replace procedure z (par1 in number) is
2 begin
3     if par1 != 0 then
4             a ('This is proc a');
5     end if;
6* end;
SCOTT@db102 SQL> /
Procedure created.
SCOTT@db102 SQL> set serveroutput on
SCOTT@db102 SQL> exec z (1);
This is proc a
PL/SQL procedure successfully completed.
SCOTT@db102 SQL>

Calling stored procedures from entity object and application module

Hello
I've put in place an EntiyImpl base class containg helper methods to call stored procedures.
I now need to call stored procedures from the application module.
Apart from creating an application module base class and duplicating the helper method code is there a way
to share the helper methods for calling stored procedures between the entity impl and application module impl ?
Regards
Paul

Does the helper code depend on features of a particular entity object instance, beyond its database transaction?
If so, I'm not sure I see how it could be used from an application module class.
If not, here's what you do:
Step 1:
Parametrize the database transaction--you might even want to. So instead of
protected myHelperMethod(Object someParam) {
DBTransaction trans = getDBTransaction();
change this to
protected myHelperMethod(DBTransaction trans, Object someParam) {
Step 2: make the method public and static--once you parameterize the DBTransaction, you should be able to do this.
public static myHelperMethod(DBTransaction trans, Object someParam) {
Step 3: Remove the method from your EntityImpl base class into a utility class:
public abstract class PlSqlUtils {
private PlSqlUtils() {}
public static myHelperMethod(DBTransaction trans, Object someParam) {
When you want to call the method from an application module, entity object, or even view object class, call
PlSqlUtils.myHelperMethod(getDBTransaction(), paramValue);
Unlike Transaction.executeCommand(), this lets you provide functionality like setting procedure parameter values, retrieving OUT parameter values, etc.
Hope this helps,
Avrom

Calling Stored Procedures from Discoverer

Does anyone know if I can call stored procedures from Discoverer? I know it supports Registered PL/SQL functions. If yes, can I find any documentation. Any information will be very helpful.
Thanks in advance!
Ning

One way I can think of to do that would be to use function with pragma restrict references. You can then use the function as a column in a SQL query to make a folder in Discoverer.

Calling a stored procedure from within a ViewObject

Is it possible to make stored procedure call from within a BC4J ViewObject? Basically something like this:
select * from table(f1(3)); where f1 is a table function. Using Oracle's pipelined table functions?
If not, is it possible to call a stored procedure from Java and have the returned results be put back into a BC4J RowSet.
In addition, is there a way to create a JDBC Resultset from a BC4J RowSet?
We need to be able to dynamically create our SQL statements (the entire SQL, not just the where clause) but are required to have these sql statements generated/executed from within a pl/sql stored procedure in the database.

Is it possible to make stored procedure call from within a BC4J ViewObject? Basically something like this:
select * from table(f1(3)); where f1 is a table function. Using Oracle's pipelined table functions?
Yes. Using our expert-mode query feature this is possible.
is it possible to call a stored procedure from Java and have the returned results be put back into a BC4J RowSet.
Yes. See this article about basing a view object on a REF CURSOR:
http://radio.weblogs.com/0118231/2003/03/03.html
In addition, is there a way to create a JDBC Resultset from a BC4J RowSet?
No. Not directly. What's the business requirement here so I can understand better?
We need to be able to dynamically create our SQL statements (the entire SQL, not just the where clause) but are required to have these sql statements generated/executed from within a pl/sql stored procedure in the database.
REF CURSOR would work fine, or if it's just the statement that needs to be generated dynamically, you could fetch the text of the SQL statement from the stored procedure, then use createViewObjectFromQueryStmt(). Although this has runtime overhead involved with describing the query.
The REF CURSOR based approach is probably best for this.

How to call stored procedures from java program?

I have tried to run a program that calls a stored procedure on MySQL
server version 5.0.17 by using connector/j 5.0, but it always fails on the
statement: con.preparecall() ,
have looked on the internet and found out that people can all mysql
stored procedure all right in their programs, really dont know what's
wrong with this small peiece of code:
import java.sql.*;
public class TestDB {
      // procedure being called is:
     CREATE PROCEDURE `dbsaystorm`.`getsite` ()
     BEGIN
        select name from tblsite;
     END
     public static void main(String[] args) {
          try {
              //Class.forName("org.gjt.mm.mysql.Driver");
              Class.forName("com.mysql.jdbc.Driver");
              Connection con = DriverManager.getConnection("jdbc:mysql://localhost/dbname",
                        "user", "pwd");
       * executing SQL statement here gives perfect correct results:
        // PreparedStatement ps = con.prepareStatement("select name from tblsite");
        // ResultSet rs =ps.executeQuery();
              // but in stored procedure way...
              //it fails here on this prepare call statement:
              CallableStatement proc = con.prepareCall("call getsite()");
              ResultSet rs =proc.executeQuery();
              if (rs == null) return;
              while (rs.next()){
                  System.out.println("site name is: "+ rs.getString(1));
              rs.close();
          } catch (SQLException e) {e.printStackTrace();}
           catch (Exception e) {e.printStackTrace();}
}it always gives this exception:
java.lang.NullPointerException
     at com.mysql.jdbc.StringUtils.indexOfIgnoreCaseRespectQuotes(StringUtils.java:959)
     at com.mysql.jdbc.DatabaseMetaData.getCallStmtParameterTypes(DatabaseMetaData.java:1280)
     at com.mysql.jdbc.DatabaseMetaData.getProcedureColumns(DatabaseMetaData.java:3668)
     at com.mysql.jdbc.CallableStatement.determineParameterTypes(CallableStatement.java:638)
     at com.mysql.jdbc.CallableStatement.<init>(CallableStatement.java:453)
     at com.mysql.jdbc.Connection.parseCallableStatement(Connection.java:4365)
     at com.mysql.jdbc.Connection.prepareCall(Connection.java:4439)
     at com.mysql.jdbc.Connection.prepareCall(Connection.java:4413)
     at saystorm.server.data.database.TestDB.main(TestDB.java:29)
where have I gone wrong?
when I commented out the statement that makes the procedure call and call preparedstatement to execute SQL select statement, it gave perfectly correct result.
it looks like there is no problem with java prog accessing MYSQL server database, but the it seems that it's just java can't call stored procedure stored on the mysql server version 5.
can it or can't it? if it can, how is that accomplished?

It is a bug in the driver because it shouldn't be
returning that exception (null pointer) even if you
are doing something wrong.
Are you using the latest version of the driver?
The stored procedure runs when you run it from the
gui/command line using a MySQL tool - correct?
As suggested you should be using the brackets. What
is the data type of the 'name' field?
You could try returning another value like one of the
following
select 1, name from tblsite;
select name, 1 from tblsite;
That might get around the bug
Additionally try just the following...
select 'test' from tblsite;yes, the driver used is in connector/j 5.0--the lastest one, and the
procedure can run correctedly at either command line or GUI mode
with no problem whatsoever, the returned data type is string type,
I have not got the chance to test it again with those values you
suggested, as I have abandoned the laptop I used to write that code
initately. There have been some other really weird cases happened on
that computer. I guess that must be something wrong with the JVM
installed on it, it was upgraded from jre5.0.04 to 06, and to 09.
something within hte JVM must have been messed up(the only reasonable
explanation). Because the same code runs correctly on my new laptop,
using the same environment: jvm 5.0_09, mysql 5.0.18, connector/J 5.0.
that old laptop really was a nightmare.

Calling stored procedures from CMP entity beans

Hello all,
Is it possible to call a stored procedure from a CMP entity bean? if so, what is the purpose of defining the <cmp-fields> in the descriptor file if I can just pass the result set of my query as an arraylist (or something similar), completely bypassing the need for the cmp fields? Am I missing something here?
Please let me know.
-Dave

You can't call a stored procedure to populate your container managed fields. You need to use an updatable view or a table. You can create some other method in a CMP bean that calls a stored procedure however.

Error while calling stored procedure from Java

Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Calling stored procedure from a column in report

Hi All,
I am new to APEX. I did a search on this forum but couldnt get an exact answer.
I know how to call or execute a stored procedure from a button. like create a PL/SQL anonymous bloack and asssociate it with the button.
my issue is a bit different. I have a report with 11 columns. the last column just says 'delete' for all the rows(i did this in my report query like SELECT x,y,z,...., 'delete' AS delete). when i click this cell for any row(this column can be a hyperlink or any clickable element), i want to call a stored procedure that takes parameters as the values in column 2 and column 4 for that particular row.
for example, my report looks somethnig like below,
FILE_ID MEMBER_CD ACTION
112 ABCD delete
113 WXYYZ delete
114 PQRS delete
i want to click the 'delete' in first row that should call a stored procedure and pass 112 and ABCD as parameters to the procedure.
i have the procedure as a process now. sturggling to bind this column to procedure but no success :(
Hope am clear. Please any help is appreciated.
Thanks

Thanks man! that was a great help. looks like i am almost there. i created those items t obe hidden.
now i am passing three parameters to the procedure. my url for that column value looks like this,
javascript:P65_PARTITION_ID=#PARTITION_ID#;P65_DBC=#DBC#;P65_FILE_ID=#FILE_ID#;doSubmit('Sku_Save');
the #DBC# parameter is a name of the person that has spaces(firstname lastname). i am getting a javascript error saying,
Line: 1
Char: 37
Error:Expected ';'
i see that char 37 is the space after firstname.
any idea how i should get rid of this error.
Also, as you have been very helpful, a question further beyond :). the above procedure will return a OUT varchar parameter. i guess i have to create another item for that. how do i read it and display just below my report as text.
Thanks Again!

Calling stored procedure from within container TX

Similar Messages

Maybe you are looking for