Calling the value change listner automatically for a checkbox.
i have some booleancheckbox column in a table.i have defined some code in the valuechangelistner in backing bean.when i am clicking any part of the table's row it automatically calling the value change listner;but my requirement is it should call the value change listner when i am only checking the checkbox.
i am using jdev 11.1.1.5.
So can any one bring some solution .
Thanks in advance.
i have some booleancheckbox column in a table.i have defined some code in the valuechangelistner in backing bean.when i am clicking any part of the table's row it automatically calling the value change listner;but my requirement is it should call the value change listner when i am only checking the checkbox.
i am using jdev 11.1.1.5.
So can any one bring some solution .
Thanks in advance.
Similar Messages
-
How can I fire an event case on the value change of an indicator, or a network variable?
Hi! I have an event structure setup to look for a value change of an indicator on the front panel. The indicator is updated by the value of a boolean network-published shared variable through a seperate parallel loop that is polling all of the network-published shared variables. The event, however, does not fire when the indicator changes value. I have switched the indicator to a control and tested it with user interaction and that works just fine.
I want to use the event structure space for my code exectution because it seems logical that that is where it would go, and it will help keep my block diagram tity. The code is also something I would like executed with the front pannel temperarily disabled. I would rather not have the code in my network-variable polling loop because again the tity issue. I would also rather not use a notification VI wired to an independent loop for this particular code.
Is there a way to have an event structure fire an event with the value change of an indicator, or a network variable directly?
Thanks for your input.
LV 8.5
-NicThanks for the reply.
I went about things a little differently, but got them to work so..... . It really was not my desire to have a boolean indicator on the front panel. As previously stated, my ultimate goal was to have an event fire on the change of a network variable, which I had to poll for anyway but that is tucked away in a section where I am handling all my network variables. I ended up using that Create User Event, Register User Event, and Generate User Event SubVIs to handle the task.
I've read the help for all of those SubVI's and it is not entirely clear to me if the event fires every time the "Generate User Event" receives some inputs, or if it only fires when the value changes. I could do a test to find out. It wouldn't be too difficult to add a shift register or a feedback node and place the Generate User Event in a case structure so that it is only fired when the input changes state. -
No correction due to the value change in Rebate
Hi,
I followed the procedure but still it gives me the above error.
Run the SDBONT06 with the Agreement, but it gives me the error No correction due to the value change for the XXX invoices.
Also run the RV15B001 and RV15B002 and again run the SDBONT06 but still not resolved the issue.
Still anything i miss? please suggest
Thanks
HrishiHi Lakshmipathi,
No condition type was removed for the said invoices, but the prices has been changed manually has been observed, hence i think system pop the above message, i also checked the Note that you provided, but i did the right steps as per the note.
Any other input?
Thanks
Hrishi -
Where we can find the detail infomation about the Value String of automatic
Where we can find the detail infomation about the Value String of automatic?
such as WE06,WE01 and so on.Hai,
Value string keys are for SAP internal usage. It is just a pointer to the transaction event key which is necessary for automatic account determination.
Movement types are linked to transaction keys via valuation string in OMWN T-code.
The R/3 System automatically determines the value string assigned to a specific transaction. It depends partly on entered parameters manually and partly on parameters derived internally by the system. The value string contains all posting transactions that are possible for a certain transaction. The program decides which of these posting transactions lead to G/L account postings in individual cases. You cannot define this in Customizing.
Value string WE01, for the goods receipt for a purchase order into stock, contains transactions BSX and WRX.
WE01: BSX, WRX, PRD, KDM, EIN, EKG, BSV, FRL, FRN, BSX, UMB.
WA14: BSX ,PRD, BSX, UMB
WA01: BSX, GBB, PRD, BSX, UMB
Value string RE05 contains transactions BSX and UMB.
In the standard system, value string WE01 is assigned to goods receipts (and also cancellations and return deliveries) for Standard and Subcontracting purchase order items without account assignment concerning valuated material into stock. In the case of (valuated) goods receipts for purchase order items not subject to account assignment,
post the items to a stock account using the transaction key BSX and make an offsetting entry to a GR/IR clearing account. A price difference posting (transaction key PRD) is only used if the valuated material is subject to standard price control and if the order price (or invoice price) is different from the standard price. Transaction key KDM is required in Inventory Management for purchase orders in foreign currencies because of differences in exchange rates between goods receipts and invoice receipts, unless the material can not be debited or credited because it is subject to standard price control.
The transaction keys EIN and EKG (and possibly FRE see account determination for delivery costs) are only used in company codes where purchase account management is active (as required in France and Belgium for example).
The transaction keys BSV, FRL, and FRN are only used for the Subcontracting item category.
Value string WA14 is defined for deliveries without charge (movement type 511).
The following scenarios are possible:
Delivery without charge for material subject to moving average price control → No accounting document
Delivery without charge for material subject to standard price control (and if the posting date is in the previous period standard price in the posting period = standard price in the current period) → Inventory posting (receipt at standard price) and offsetting entry to price differences account
Delivery without charge for material subject to standard price control, with posting date in the previous period and the standard price in the posting period is different to the standard price in the current period → Inventory posting (receipt at standard price) and offsetting entry to price differences account (posting in the previous period) → Stock correction posting and Revenue/expense from revaluation (posting in the current period)
In the standard system, value string WA01 is assigned to goods issues and other goods receipts. The R/3 System uses an additional influencing factor, account grouping, to differentiate further between the various movements during account determination.
Hope it will be Helpful 4 u.
Reward Point if Useful. -
The value is not allowed for the field Cross-plant CM
Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar -
Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
How to response the value change of slide bar only after mouse released
Hi, all
When I used the slide bar to control my device, I response the value change of slide bar and set the new value to my device. But it will generate response constantly when I use the mouse to drag the pointer, which is not my wanted. I just need to response only after the mouse released. How can I implement this function?
Hope your suggestion, thanks a lot.
Solved!
Go to Solution.No, not if you use the right event under "Mouse".
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx -
Error : The value is not set for parameter number"
Hello All,
I am getting an error message when I tried modifying a program by adding a new ID column to a database table.
All DML is working except the Delete. So to look at the delete method, I am setting the parameter correctly as can be seen in the code belwo.
Can someone please take a quick look and let me know where I need to tweak the code further.
Thanks
Fm
The piece of code is given below.
/* File Modified */
/* EmailSetupDao.java
* Generated by the MDK DAO Code Generator
package com.harris.mercury.setups.standard.emailsetup;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import org.apache.log4j.Logger;
import com.harris.mercury.dao.CreateException;
import com.harris.mercury.dao.DAO;
import com.harris.mercury.dao.DataField;
import com.harris.mercury.dao.Holder;
import com.harris.mercury.dao.LocalResultProxy;
import com.harris.mercury.dao.RemoveException;
import com.harris.mercury.dao.ResultProxy;
import com.harris.mercury.system.DatabaseHelper;
import com.harris.mercury.system.database.dialect.Dialect;
* The EmailSetupDao class
public class EmailSetupDao implements DAO
protected static Logger logger = Logger.getLogger(EmailSetupDao.class);
/* This method is called by ResultProxies when they need
* the data they have retrieved in a ResultSet mapped
* to a holder.
public Holder createHolder(ResultSet rs) throws SQLException
EmailSetupHolder holder = new EmailSetupHolder(); // THE CODE GENERATOR NEEDS THIS VARIABLE
try
/* Assign the data into the new holder */
// $$START_CREATEHOLDER_CONVERSIONS
holder.setEmail_address( rs.getString("email_address") );
holder.setLogin_id( rs.getString("login_id") );
holder.setUser_name( rs.getString("user_name") );
holder.setSmtp( rs.getString("smtp") );
holder.setId(rs.getString("id") );
// $$END_CREATEHOLDER_CONVERSIONS
catch(SQLException sqle)
logger.error(sqle, sqle);
throw sqle;
return holder;
/* The findAll method returns a ResultProxy containing all the
* records in the pucemailr table, unless an extended where clause
* has been defined.
public ResultProxy findAll(Connection con) throws SQLException
LocalResultProxy result = null; // THE CODE GENERATOR NEEDS THIS VARIABLE
// $$START_ALLFIND
result = new LocalResultProxy(this,con, "select email_address, login_id, user_name, smtp, id from pucemailr"+makeOrderBy());
// $$END_ALLFIND
return result;
/* Inserts a record into the pucemailr table using a EmailSetupHolder.
* An exception is thrown if it is not sucessful.
public void insert(Connection con, EmailSetupHolder holder) throws CreateException
CreateException ce = null;
PreparedStatement ps = null; // THE CODE GENERATOR NEEDS THIS VARIABLE
try
// Insert into the data base
// $$START_INSERT_PS
ps = con.prepareStatement("insert into pucemailr (email_address, login_id, user_name, smtp) values(?, ?, ?, ?) ");
// $$END_INSERT_PS
/* Assign the variables in the holder to their corresponding
* indexes in the prepared statement
ps = assignPreparedStatementValues(ps, holder, true) ;
// Try the insert
ps.executeUpdate();
catch (SQLException se)
ce = new CreateException(se.getMessage());
catch (Exception ex)
ce = new CreateException(ex.getMessage());
} finally {
DatabaseHelper.close(ps);
// Throw exception if error occurred
if (ce != null) {
throw ce;
/* This method will update a pucemailr record using the
* supplied EmailSetupHolder. If an error occurs, an exception
* is thrown.
public void update(Connection con, EmailSetupHolder holder) throws Exception
RuntimeException re = null;
PreparedStatement ps = null; // THE CODE GENERATOR NEEDS THIS VARIABLE
try
// $$START_UPDATE_PS
ps = con.prepareStatement("update pucemailr set email_address=?, login_id=?, user_name=?,smtp=? where id=?");
// $$END_UPDATE_PS
/* Assign the variables in the holder to their corresponding
* indexes in the prepared statement
ps = assignPreparedStatementValues(ps, holder, false) ;
// Try the insert
int ret = ps.executeUpdate();
if (ret != 1)
re = new RuntimeException("Update failed on table pucemailr in EmailSetupDao");
catch (SQLException se)
re = new CreateException(se.getMessage());
catch (Exception ex)
re = new RuntimeException(ex.getMessage());
} finally {
DatabaseHelper.close(ps);
// Throw exception if error occurred
if (re != null) {
throw re;
/* Using the EmailSetupHolder, this method locates records in the pucemailr table.
* Null values found in the holder are not used in the search.
* An exception is thrown if an error occurs.
public ResultProxy find(Connection con, EmailSetupHolder holder) throws SQLException
// THE CODE GENERATOR NEEDS THESE VARIABLES
ResultProxy result = null;
int needAnd = 0;
StringBuffer selectStatement = new StringBuffer();
// $$START_FIND
selectStatement.append("select email_address, login_id, user_name, smtp, id from pucemailr ");
if(holder.getId() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("id like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getId())+"%'");
if(holder.getEmail_address() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("email_address like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getEmail_address())+"%'");
if(holder.getLogin_id() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("login_id like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getLogin_id())+"%'");
if(holder.getUser_name() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("user_name like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getUser_name())+"%'");
if(holder.getSmtp() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("smtp like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getSmtp())+"%'");
// $$END_FIND
result = new LocalResultProxy(this, con, selectStatement.toString()+makeOrderBy());
return result;
/* Creates an Order by clause */
public String makeOrderBy()
String result = "";
// $$START_ORDERBY
result = " order by smtp";
// $$END_ORDERBY
return result ;
/* This method deltes a single record that matches all the
* variables found in the EmailSetupHolder.
* An exception is thrown if an error occurs.
public void delete(Connection con, EmailSetupHolder holder) throws RemoveException
RemoveException re = null;
PreparedStatement ps = null; // THE CODE GENERATOR NEEDS THIS VARIABLE
boolean hasVars = false;
StringBuffer deleteSQL = new StringBuffer();
deleteSQL.append( "delete from pucemailr where " );
// $$START_DELETE_SQL
if (hasVars)
deleteSQL.append(" and ");
if (holder.getEmail_address() != null) {
deleteSQL.append("email_address=?") ;
} else {
deleteSQL.append("email_address is null");
hasVars = true;
if (hasVars)
deleteSQL.append(" and ");
if (holder.getLogin_id() != null) {
deleteSQL.append("login_id=?") ;
} else {
deleteSQL.append("login_id is null");
hasVars = true;
if (hasVars)
deleteSQL.append(" and ");
if (holder.getUser_name() != null) {
deleteSQL.append("user_name=?") ;
} else {
deleteSQL.append("user_name is null");
hasVars = true;
if (hasVars)
deleteSQL.append(" and ");
if (holder.getSmtp() != null) {
deleteSQL.append("smtp=?") ;
} else {
deleteSQL.append("smtp is null");
hasVars = true;
if (hasVars)
deleteSQL.append(" and ");
if (holder.getSmtp() != null) {
deleteSQL.append("id=?") ;
} else {
deleteSQL.append("id is null");
hasVars = true;
// $$END_DELETE_SQL
try
ps = con.prepareStatement(deleteSQL.toString());
/* Assign the variables in the holder to their corresponding
* indexes in the prepared statement
int index = 1 ;
// $$START_DELETE_VARS
/* if( holder.getEmail_address() != null) {
ps.setString(index, holder.getEmail_address() );
index ++;
if( holder.getLogin_id() != null) {
ps.setString(index, holder.getLogin_id() );
index ++;
if( holder.getUser_name() != null) {
ps.setString(index, holder.getUser_name() );
index ++;
if( holder.getSmtp() != null) {
ps.setString(index, holder.getSmtp() );
index ++;
if( holder.getId() != null) {
ps.setString(index, holder.getId() );
index ++;
// $$END_DELETE_VARS
// Try the insert
int ret = ps.executeUpdate();
if (ret != 1)
re = new RemoveException("Delete failed on table pucemailr in EmailSetupDao");
catch (SQLException se)
re = new RemoveException(se.getMessage());
catch (Exception ex) {
re = new RemoveException(ex.getMessage());
} finally {
DatabaseHelper.close(ps);
// Throw exception if error occurred
if (re != null)
throw re;
/* This method finds records in pucemailr table that match the
* supplied where clause.
* An exception is thrown if an error occurs.
public ResultProxy advancedFind(Connection con, String whereclause) throws SQLException
// THE CODE GENERATOR NEEDS THIS VARIABLE AND THE PARAMETER VARIABLE 'whereclause'
StringBuffer selectStatement = new StringBuffer();
// $$START_ADVANCEDFIND
selectStatement.append("select email_address, login_id, user_name, smtp, id from pucemailr ");
// $$END_ADVANCEDFIND
selectStatement.append(" where ");
selectStatement.append(whereclause);
return new LocalResultProxy(this,con, selectStatement.toString()+makeOrderBy());
/* This methods returns a Vector of DataField objects that
* map the columns in the pucemailr table for the
* advanced find Where Clause Generator in the client. The extended
* where clause will be applied if one exists for this DAO.
public Vector<DataField> getQueryFields() {
Vector<DataField> v = new Vector<DataField>() ; // THE CODE GENERATOR NEEDS THIS VARIABLE
// $$START_QUERYFIELDS
v.addElement( new DataField( "email_address", "Email address", DataField.STRING ) ) ;
v.addElement( new DataField( "login_id", "Login id", DataField.STRING ) ) ;
v.addElement( new DataField( "user_name", "User name", DataField.STRING ) ) ;
v.addElement( new DataField( "smtp", "Smtp", DataField.STRING ) ) ;
v.addElement( new DataField( "id", "Id", DataField.STRING ) ) ;
// $$END_QUERYFIELDS
return v;
* Jira Issue NS 30679 - Faiz Qureshi March 7, 2013
* @param ps
* @param holder
* @param isInsert - Added Boolean parameter so the id parameter does not get passed for Insert DML statements
* @return
* @throws Exception
public PreparedStatement assignPreparedStatementValues(PreparedStatement ps, EmailSetupHolder holder, boolean isInsert)
throws Exception
// $$START_PS_SETS
if( holder.getEmail_address() != null)
ps.setString(1, holder.getEmail_address() );
else
ps.setNull(1, java.sql.Types.VARCHAR);
if( holder.getLogin_id() != null)
ps.setString(2, holder.getLogin_id() );
else
ps.setNull(2, java.sql.Types.VARCHAR);
if( holder.getUser_name() != null)
ps.setString(3, holder.getUser_name() );
else
ps.setNull(3, java.sql.Types.VARCHAR);
if( holder.getSmtp() != null)
ps.setString(4, holder.getSmtp() );
else
ps.setNull(4, java.sql.Types.VARCHAR);
if (!isInsert){
if( holder.getId() != null)
ps.setString(5, holder.getId() );
else
ps.setNull(5, java.sql.Types.VARCHAR);
// $$END_PS_SETS
return ps;
/* Do not delete this tag, it is reserved for adding new methods to the DAO */
// $$ START_MDK_RESERVED
// $$START_EDITABLE_SUB_TABLE_NAME
* Returns the table names used in this DAO
* @return the table names used in this DAO
public String[] getTableNames() {
// $$START_UNEDITABLE_SUB_TABLE_NAME
String[] tableNames = new String[] {"pucemailr"};
// $$END_UNEDITABLE_SUB_TABLE_NAME
return tableNames;
// $$END_EDITABLE_SUB_TABLE_NAME
// $$START_EDITABLE_SUB_FIND
* Using the EmailSetupHolder, this method locates records in the pucemailr table.
* Null values found in the holder are not used in the search.
* An exception is thrown if an error occurs.
* @param con The database connection
* @param holder holder containing the values to generate a query upon
* @param orderBy The order by clause. Note, you must specify the "ORDER BY". If you forget to add a
* space in front of the order by, it will be automatically handled. Specify null to use the default
* or empty string for no ordering.
* @return The result of the search
* @throws SQLException if an error occurs in the search.
public ResultProxy find(Connection con, EmailSetupHolder holder, String orderBy) throws SQLException
// THE CODE GENERATOR NEEDS THESE VARIABLES
ResultProxy result = null;
int needAnd = 0;
StringBuffer selectStatement = new StringBuffer();
// $$START_FIND
selectStatement.append("select email_address, login_id, user_name, smtp, id from pucemailr ");
if(holder.getEmail_address() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("email_address like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getEmail_address())+"%'");
if(holder.getLogin_id() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("login_id like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getLogin_id())+"%'");
if(holder.getUser_name() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("user_name like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getUser_name())+"%'");
if(holder.getSmtp() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("smtp like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getSmtp())+"%'");
if(holder.getId() != null)
if ( needAnd > 0)
selectStatement.append(" and ");
else
selectStatement.append(" where ");
needAnd++;
selectStatement.append("Id like ");
selectStatement.append("'"+ Dialect.getSafeDialect(con).escape(holder.getId())+"%'"); }
// $$END_FIND
result = new LocalResultProxy(this, con, selectStatement.toString() + (orderBy == null ? makeOrderBy() : com.harris.mercury.system.utils.StringUtils.padLeft(orderBy)));
return result;
// $$END_EDITABLE_SUB_FIND
// $$START_EDITABLE_SUB_FINDALL
* The findAll method returns a ResultProxy containing all the records in the pucemailr table,
* unless an extended where clause has been defined.
* @param con The database connection
* @param orderBy The order by clause. Note, you must specify the "ORDER BY". If you forget to add a
* space in front of the order by, it will be automatically handled. Specify null to use the default
* or empty string for no ordering.
* @return The result of the search
* @throws SQLException if an error occurs in the search.
public ResultProxy findAll(Connection con, String orderBy) throws SQLException
LocalResultProxy result = null; // THE CODE GENERATOR NEEDS THIS VARIABLE
// $$START_UNEDITABLE_SUB_FINDALL
result = new LocalResultProxy(this,con, "select email_address, login_id, user_name, smtp, id from pucemailr" + (orderBy == null ? makeOrderBy() : com.harris.mercury.system.utils.StringUtils.padLeft(orderBy)));
// $$END_UNEDITABLE_SUB_FINDALL
return result;
// $$END_EDITABLE_SUB_FINDALL
// $$START_EDITABLE_SUB_ADVANCEDFIND
* This method finds records in pucemailr table that match the supplied where clause.
* @param con The database connection
* @param whereclause The where clause for the select statement - do not include the "where" - it
* will be automatically prepended
* @param orderBy The order by clause. Note, you must specify the "ORDER BY". If you forget to add a
* space in front of the order by, it will be automatically handled. Specify null to use the default
* or empty string for no ordering.
* @return The result of the search
* @throws SQLException if an error occurs in the search.
public ResultProxy advancedFind(Connection con, String whereclause, String orderBy) throws SQLException
// THE CODE GENERATOR NEEDS THIS VARIABLE AND THE PARAMETER VARIABLE 'whereclause'
StringBuffer selectStatement = new StringBuffer();
// $$START_ADVANCEDFIND
selectStatement.append("select email_address, login_id, user_name, smtp, id from pucemailr ");
// $$END_ADVANCEDFIND
selectStatement.append(" where ");
selectStatement.append(whereclause);
selectStatement.append((orderBy == null ? makeOrderBy() : com.harris.mercury.system.utils.StringUtils.padLeft(orderBy)));
return new LocalResultProxy(this,con, selectStatement.toString());
// $$END_EDITABLE_SUB_ADVANCEDFIND
// $$ END_MDK_RESERVED
}First thing to do is to edit the post and use some tags to format the code as it is unreadable and too much!
Read the FAQ (https://forums.oracle.com/forums/help.jspa) to find out how to do this.
Next we need to know the jdev version you are using!
As the code is generated I would first try to generate it again after the db change.
Timo -
How do I get the value of material automatically when entered the material
Respected,
when I have created service notification in customer service .Then next process comes for creating service order and sales order but when I enter the material in sales order it should pick the value of that material automatically but it is not picking the value of the material automatically so where should I change the setting so I will get the value automatically of that material .
thanks
AVANISH GULATEE- -- - -- - - -
-
DefaultCellEditor in JTable can not update itself when the value changes
Hi,
I have a JTable which has 4 columns. The 3rd column has a comboBox. whenever I select an item from the first row, the cell at (currentrow, 4thcolumn) will be updated according to the item selected.
Now the problem is, after selecting the item in any cell with 3rd column, the row is updated correctly, but then all comboBox in column 3 are gone! I cannot figure out what causes this. Please help! Any suggestion will be greatly appreciated!
JingThanks! Could you give more details on how to use the second approach?
I have a table with two columns, one called ID and the other called Value. I'm using JComboBox for the Value column. Whenever I select an item from the comboBox, I want the value in the cell under the ID column to change value to the value selected in the comboBox.
The problem I'm having now is although I can change the value in the comboBox and which triggers the event to change the value under the ID column, when I click the comboBox of another row, the cell under ID of the previous row changed also, before the value under ID of the current selected row.
I think the problem is there is no distinct comboBox for each row of the table. Seems like when one box change and trigger an event, that event performed in every other rows in the table.
Following is the code:
public class Test extends JPanel{
DefaultTableModel tm;
JTable table;
JScrollPane nscrollPane;
public int total=4;
public Vector datavec, thvec;
public Test(Vector datavec, Vector thvec){
this.datavec=datavec;
this.thvec=thvec;
tm = new DefaultTableModel(datavec,thvec);
table = new JTable(tm);
table.addMouseListener(new PopupListener(table));
// table.addMouseListener(new PopupListener(table));
//tm.setTableHeader(table.getTableHeader()); //ADDED THIS
int height = table.getRowHeight()*table.getRowCount();
table.setPreferredScrollableViewportSize(new Dimension(500, height));
//Create the scroll pane and add the table to it.
nscrollPane = new JScrollPane(table);
setUpNNColumn(table, table.getColumnModel().getColumn(1));
//Add the scroll pane to this panel.
add(nscrollPane);
public void updateLabel(Integer size)
int r=table.getSelectedRow();
if(r!=-1)
((Vector)datavec.elementAt(r)).setElementAt(size, 0);
repaint();
public void setUpNNColumn(JTable table, TableColumn nnColumn) {
//Set up the editor for the sport cells
JComboBox comboBox = new JComboBox();
comboBox.addActionListener(new ComboBoxListener());
int num=total/2;
for(int i=0; i<2; i++){
comboBox.addItem(new Integer(num*(i+1)));
comboBox.setSelectedIndex(1);
nnColumn.setCellEditor(new DefaultCellEditor(comboBox));
private class ComboBoxListener implements ActionListener{
public void actionPerformed(ActionEvent e)
JComboBox cb = (JComboBox)e.getSource();
Integer size = (Integer)cb.getSelectedItem();
updateLabel(size);
private static void createAndShowGUI(Vector a, Vector b) {
\ JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
JFrame frame = new JFrame("Nearest Neighbor Fact Table");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
Test newContentPane = new Test(a, b);
newContentPane.setOpaque(true); //content panes must be opaque
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
int patidx, hitnum=2;
Vector a=new Vector();
Vector a1=new Vector();
Vector a2=new Vector();
a1.add(new Integer(1));
a1.add(new Integer(4));
a.add(a1);
a2.add(new Integer(2));
a2.add(new Integer(4));
a.add(a2);
Vector b=new Vector();
b.add("ID");
b.add("Value");
//StatTableGUI.createAndShowGUI(gd);
Test.createAndShowGUI(a,b);
Any suggestions? Thanks!
Jing -
The value should be set for Base image URL and Image file directory
Hi experts
Now customer has the following issue.
XML Publisher concurrent request, using RTF layout template with LOGO, does not generate the LOGO for Excel output.
but in output formats PDF, it is shown normally.
from the debug log, we can found the following error message
======
[051812_054716051][][ERROR] Could not create an image. Set html-image-dir and html-image-base-uri correctly.
======
so I tell the customer to do the following action plan.
1. in XML Publisher Administrator resp > Administration expand the HTML Output section.
2a. enter a value for 'Base image URI'
2b. enter a value for 'Image file directory'
Customer set the value as following and retest this issue,but he found the issue is not solved.
Base image URI: /u01/r12/ebssnd/apps/apps_st/comn/java/classes/oracle/apps/media/XXSLI_SONY_LIFE_LOGO.gif
Image file directory: /u01/r12/ebssnd/apps/apps_st/comn/java/classes/oracle/apps/media
I verified 'Base image URI' and 'Image file directory' settings:
1) Change output type to HTML.
2) Click the Preview.
but the image is correctly displayed on HTML, so I think the issue is caused by user's uncorrectly setting of the base image URL and/or image file directory
but could anyone give me some advice on which value should be set for Base image URL and Image file directory
Regards
shuangfeiFirst thing to do is to edit the post and use some tags to format the code as it is unreadable and too much!
Read the FAQ (https://forums.oracle.com/forums/help.jspa) to find out how to do this.
Next we need to know the jdev version you are using!
As the code is generated I would first try to generate it again after the db change.
Timo -
How to set/get the values thru Wedbynpro coding for User mapping fields
Hi All
In system object we have the user mapping fields like District,city,plant,Salesmanager.
now we want to set/get the values of these usermapping fields of system object thru webdynpro coding...
if anybody have sample codes of the same then it would be great help to me
Thanks in advance
Thanks
Trisha RaniHi Kavitha
Thanks for your reply
My requirement is exactly as follows.
1) i have created one portal system object in system administration and also i created usermapping fields in the system object from the usermanagement in system object.
i created the user mapping fields like Plant,SalesManager,District etc.
i also created the system alias name for the same system object
2) Now i came to persoanlize link and mapped the system object to the portal user.
while mapping to the system object we need to enter Mapping userId, Password , once we enter these values and we can also enter the values of usermapping fields which we defined while creating the system object ( for example District,Salesmanager,Plant etc)
once we enter all the values and click on save then these usermapping values to be mapped to the portal user.
3) Now my requirement is , i want to control the usermapping field values thru webdynpro coding for setting/getting the values.
I need sample code of the same.
Please let me know if u need more details on the same.
Thanks
Trisha Rani -
How to call the 'DETAIL' function in ALV for a program?
Dear Friends,
I have a prf_tree (TYPE REF TO cl_gui_alv_tree), and I added below codes to add an new button for displaying the detail record, it works fine:
CALL METHOD prf_toolbar->add_button
EXPORTING
fcode = prf_tree->mc_fc_detail
icon = icon_detail
butn_type = cntb_btype_button
text = ''
quickinfo = 'Show Details'.
Everytime I click this new button, a window will popup and display the record details.
My question is: how to call this standard function ('DETAIL' function) in a program? for example:
CASE ldf_ok_code.
WHEN gcf_okcode_save.
PERFORM okcode_save.
WHEN 'SHOW_DETAIL'.
CHECK gdf_nodkey_9003 IS NOT INITIAL.
PERFORM SHOW_DETAIL.(How to write this code to display the detail data of the selected record?)
Thanks a lot!Hi,
Go for Interactive Reporting
like When u click on the output then it will show the Detail report u want .
for that purpose Pls
Use Hide command .
And call another report
by using SUBMITT Program -
How to compare the value node of a for-each-group with other for-each-group
Hello!
I have a report in Oracle BI Publisher (10.1.3.2) with several data set. My XML schema is something like
<DATA>
<PARAMETERS>
<MY_PARAMETERS>
<A_ID>12345</A_ID>
<DESCRIPTION>ABC</DESCRIPTION>
<VALUE>111111</VALUE>
</MY_PARAMETERS>
<MY_PARAMETERS>
<A_ID>12345</A_ID>
<DESCRIPTION>DEF</DESCRIPTION>
<VALUE>222222</VALUE>
</MY_PARAMETERS>
<MY_PARAMETERS>
<A_ID>67890</A_ID>
<DESCRIPTION>ABC</DESCRIPTION>
<VALUE>333333</VALUE>
</MY_PARAMETERS>
</PARAMETERS>
<NAMES>
<MY_NAMES>
<A_ID>12345</A_ID>
<NAME>ASDF</NAME>
</MY_NAMES>
<MY_NAMES>
<A_ID>67890</A_ID>
<NAME>EFGH</NAME>
</MY_NAMES>
</NAMES>
<VALUES>
<MY_VALUES>
<A_ID>12345<A_ID>
<VALUE>10987</VALUE>
<DESCRIPTION>ASDFG</DESCRIPTION>
</MY_VALUES>
<MY_VALUES>
<A_ID>12345<A_ID>
<VALUE>26385</VALUE>
<DESCRIPTION>EFGHI</DESCRIPTION>
</MY_VALUES>
<MY_VALUES>
<A_ID>67890<A_ID>
<VALUE>24355</VALUE>
<DESCRIPTION>ASDFG</DESCRIPTION>
</MY_VALUES>
</VALUES>
</DATA>
I'm trying to build a rtf template in Word using this XML schema. The "A_ID" nodes in each group in my data have the same value. I want for each "A_ID" take the respective values in /DATA/VALUES/MY_VALUES.
<?for-each-group:MY_PARAMETERS;./A_ID?>
<?for-each:current-group()?>
<?choose:?><?when: DESCRIPTION='ABC'?>
<?VALUE?>
<?end when?><?end choose?>
<?end for-each?>
<?for-each:current-group()?>
<?choose:?><?when: DESCRIPTION='DEF'?>
<?VALUE?>
<?end when?><?end choose?>
<?end for-each?>
<?/DATA/NAMES/MY_NAMES/VALUE?>
<?for-each-group:/DATA/VALUES/MY_VALUES;./A_ID?>
<?for-each:current-group()?>
<?choose:?><?when: DESCRIPTION='ASDFG'?>
<?VALUE?> <---------------- I obtain for this node the '24355' and '10987' values
<?end when?><?end choose?>
I want to know how to obtain only '24355' value, this is, the value for A_ID (/DATA/VALUES/MY_VALUES) = A_ID (/DATA/PARAMETERS/MY_PARAMETERS).
Can someone help me?CREATE OR REPLACE TRIGGER "TEST_TRG"
BEFORE UPDATE OF "STATUS"
ON "TABLE1"
FOR EACH ROW
BEGIN
IF (:NEW.status = 'HOLD')
THEN
INSERT INTO table2
(status
VALUES (:NEW.status
END IF;
END;You should learn how to write PL/SQL code.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
ALV Grid - Hiding the values of a feild and disabling checkboxs
Hello,
I have a report that requires the need to hide certain fields in an ALV report as well as checkbox in certain rows.
So example I want to turn the ALV's output from ....
PO Number
PO Item
450000001
001
450000001
002
450000001
003
450000002
001
450000002
002
[ ] = checkbox
to the desired output below ...
PO Number
PO Item
450000001
001
002
003
450000002
001
002
so baically I want to do 2 things
1. Hide the values of certain fields if the value from the previous row is identital and ...
2. .... only include checkboxes for each new value of that column by either hiding (preferable) or disabling them.
Hope to hear from all of you soon.
Thank you all and good day.Hi Chad Cheng,
U have a variable IT_SORT in the FM REUSE_ALV_GRID_DISPLAY.
IT_SORT -fieldname = ur fieldname 1.
IT_SORT-up = 'X' or IT_SORT-Down = 'X'.
Append it_sort.
IT_SORT -fieldname = ur fieldname 2.
IT_SORT-up = 'X' or IT_SORT-Down = 'X'.
Append it_sort.
awrd points if helpful
Bhupal
Maybe you are looking for
-
Problems printing to PDF from PPT 2K7
Hi All, I am wondering if someone here can help me. I have a user that is having an issue printing to Adobe PDF from Powerpoint 2007. He can save the file as a PDF but wants to print it so he can get a better resolution. Office 2007 is installed on a
-
can I change my 2007 mac mini from 10.4.11 to 10.5?
-
Install Photoshop CC 2014 and uninstall Photoshop CC?
Hi. If i have installed Photoshop CC 2014, can I uninstall photoshop CC? Thanks
-
Does Form Base Project budgeting support Budget Forecasting?
Hello Expert, Can you please help me in understanding that does form base budgets in project costing support budget forecasting? if no then is that it can be achive only through Project Management? Your help will be appreciated. Thanks Uday
-
Unlimited check for Service items on contracts
Hello, When I'm creating a contract for a service item, on the item detail the checkbox for Unlimited is always checked. Why is this developed like that? and is there a way to modify this behavior? Regards, Nelson