Calling two table controlls based on some conditions......

I hav a requirement in which i have two table controlls, which i want to call based on some conditions. Like if condition is satisfied the first table controll shud fill up the screen and other wise the secondtable controll shud fill the screen....

Hello,
In the main screen where u need to vary with the 2 table controls , create a subscreen area .
Now create two subscreens with the required table controls respectively.
You can dynamically call the subscreens accordingly for the conditions.
Hope this may help you.
Neeraj

Similar Messages

How do i export the table data based on some condition for backup

Is is syntax correct
exp scott@orcl92 file=emp_29aug.dmp tables=emp
query=\"where emp_no in (1,2,3,4) \".
How do i take the backup of more than one table?
what is the syntax for that
Thans

Thanks for your response
If i want to add more than one condition in the query, then how do i do that
exp scott/tiger@orcl file=scott.dmp tables=(emp, dept) query=\"where deptno = 30\" and emp_no in (1,2,3,4);
how do i do that

Calling a window in sapscript based on some conditions

Hi all,
I want to call a window in SAPScript based on some conditions.Plz suggest how could i do that.
Regards,
Chinmay.

Hi,
Use a text element in that window.
ie..
/E TEXT
&VBAK-VBELN&
in ur driver program
if vbak-vbeln is not initial. ( your condition)
call function 'write_form'
element = 'TEXT'
window = 'WINDOW_NAME'
Endif.
hope this helps
santhosh

How to dynamically add/remove a button from the ribbon based on some condition? (Ribbon XML)

Hi,
I have a ribbon (done using ribbon XML) with menu options. I need to remove few buttons from the menu dynamically based on some condition. Also, I want to change the label of another button. How to achieve this programmatically? (C#)
Thanks in advance.
Thanks Prasad

Hello Prasad,
Use callbacks for populating Ribbon controls such as menu, dropDown, gallery and etc. Then you can use the
Invalidate or
InvalidateControl methods of the
IRibbonUI interface to get your callbacks invoked when required. Thus, you will be able to delete the required item(s).
You will find the following articles in MSDN helpful:
Chapter 11: Creating Dynamic Ribbon Customizations (1 of 2)
Chapter 11: Creating Dynamic Ribbon Customizations (2 of 2)
To change the label of your controls at runtime you need to use the getLabel callback and call the Invalidate or InvalidateControl methods of the IRibbonUI interface. The following series of articles describe the Fluent UI in depth:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

Grey out a particular row in ALV based on some condition.

Hi All,
How can we grey out the particular row in ALV based on some condition( I am using the function modules and not OOPS).
Regards
Ramesh.

Hello Ramesh
In this case you need to add a specific field to your structure:
TYPES: BEGIN OF ty_s_outtab.
INLCUDE TYPE <my table or structure>.
TYPES: CELLTAB TYPE lvc_t_styl. " name is arbitrary but this one is most frequently used
TYPES: END OF ty_s_outtab.
DATA: gt_outtab TYPE STANDARD TABLE OF ty_s_outtab
WITH DEFAULT KEY.
You can use the fieldcatalog to make an entire column non-editable (LVC_S_FCAT-EDIT = ' ' ).
However, in case of rows you need to inactivate all cells of this row. For sample coding please refer to thread:
How to conditionally set ALV field as hotspot
Regards
Uwe

Display Image(which set as behind text) based on some condition.

hi all
I have developed a xml report and in that rtf am displaying a static image (which is set as behin text).
But i need to display the image based on some condition
for example i have a field as ORG_ID
if org_id=87 then image should display for that purpose am planning to use <?if:ORG_ID=87?> condition but where to place this condition for the image.
kindly help me
thanks for all in advance.

that too not working because
on image am displaying some other fields.
see i think you didn't get my point.
in my out put page am displaying item details ,quantity,and cost and customer details just like invoice copy .
behind this data am displaying my company logo which will capture whole page size..
if i place the image in table then fields will be automatically in table so i cant restrict image in this way.
Kindly suggest any other way that works only for image which is behind text. i mean condition should be applicable only for image and leaving all other fileds in rtf.
or
help on this how to set a dynamic image as behind the text.
Edited by: maddy on Nov 28, 2012 7:32 AM
Edited by: maddy on Nov 28, 2012 7:35 AM

Display an exception based on some condition

HI..
how to run a exception based on some condition i.e
i want to highlight the sales(key figure) which r less than the average sales..
where sales and average sales r keyfigures...

Hi!
welcome to SDN.
create a calculated key figure which will be 1 if the sales is less then the average sales.
create exception based on this calculated key figure.
with regard
ashwin
<i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

How to make a region mandatory based on some conditions using CO Extension?

Dear All,
I want to make Attachments region in a seeded page mandatory, based on some conditions. I am able to make fields mandatory using CO Extension, but i am not able to make the attachments region mandatory. Please help.
Thanks
Raj

Raj,
I have not tried but check if you could get the rowcount which shows how many attachment are upload or not. Then by checking this throw exception if the rowcount is o.
Thanks
--Anil
http://oracleanil.blogspot.com/

Insert data in same table based on some condition

Hi. I am new to this forum.
I have to write a stored procedure to Insert Data into a table say MYTABLE ,having structure as:
Col1 Col2 Col3 ................ TotalInstallments CurrentInstallment PaidAmount MonthYear
I have to insert all the data as it is in the same table(MYTABLE) except changing some fields on basis of some conditions:
1. if PaidAmount>0 && CurrentInstallment<TotalInstallment then
CurrentInstallment=CurrentInstallment+1
2. In the MonthYear field I am having data in formate(month/year)ex. 01/2012, 11/2012 ....
So I have to insert data by incrementing month and year. for example:
if currentdata is 11/2012 then next data will be 12/2012
But next will be 01/2013
I have to select all the records which belongs to previous month(through MonthYear field ) and put checking & changes on each record of the selected data and then insert them into same table(MYTABLE).
How to achive that?
Thanks.

978184 wrote:
Every thing is working fine but some strange result as:
when i run my Procedure TRANSFERDATATONEXTMONTH
1. by Passing Value as : CUSTOMERID_var ='ABX101' and MONTHYEAR_var='12/2012' it insurts 5 rows
which is correct , since I have 5 records where CUSTOMERID='ABX101' and MONTHYEAR='12/2012' and
new 5 rows has CUSTOMERID='ABX101' and MONTHYEAR='01/2013' (all other values are as expected)
2. now when i again run by passing values: CUSTOMERID='ABX101' and MONTHYEAR='01/2013' it inserts 10 records(just double )
and new records has value CUSTOMERID='ABX101' and MONTHYEAR='02/2013' (while on the basis of condition CUSTOMERID='ABX101' and MONTHYEAR='01/2013' i have in my table only 5 records)
and all records are duplicate. Some times it inserts three times , while on condition basis it should no. What is happening?Probably, meanwhile you were trying to Insert the First time and the second time, someone did run the procedure that Inserted 5 More records for 01/2013. And, hence your Second run inserted 10 records instead of 5.
>
Why it is inserting double of records while i have only 5 records on given condition? Am I missing some thing?Yes, you are. You are missing your Tables, Your Dummy/Sample Data, Working Procedure/Function that can be replicated.
Without this, we cannot simply believe on assertions that Oracle is behaving incorrectly.
In addition to this, the GetMonthYear function, should be scrapped. It is un-necessary, when the same logic can be achieved using Oracle ADD_MONTHS function (See my previous post). And you are storing the MonthYear in a Varchar field, which ideally should be a Date field. This eradicates the un-wanted need to cast from VARCHAR - DATE - VARCHAR.
Please do make some time to read {message:id=9360002} and mentioned relevant details.
And notice, the code difference in my previous post and in your code.
Please use
{noformat}
(exactly as shown) above and below your code, that indents the code properly for better readability.
{noformat}

How can i end the Process chain based on some condition

HI All,
I have a scenario where i have a main pc chain which call the new chain at the end which in turn again call pc1. So its more like a closed loop .
pc1-->pc2->pc1
What main chain does is it reads some field value from a dso and assign that to some variable and set some flag to identify that value has been used. My second chain just run the report using the same variables assign by first chain. Now i have to design the main chain such that when all the values have been read from the dso, it should exit and should not trigger 2nd chain. How can i achieve this scenario.
Thanks
Prashant

Hi,
For this try using Process Type-"Decision between multiple Alternatives" in your main chain.It helps you the set condieion based on some formulas
Pls refer links
Decision Between Multiple Alternatives
thanks
nilesh
Edited by: npathak on Aug 11, 2010 1:16 PM

How to make a table column block editable for a row and remain non editable for other row based on some condition

hi ,
i need help on the below scenario ,
we have a web dynpro table with different columns, now based on new business requirement one of the column need to
dynamically editable or non editable for different row.
for ex :
Field 1
Field 2 ( Dynamic field )
Field 3
Field 4
Data 11
Data 12 ( Editable with Drop down )
data 13
data 14
Data 21
Data 22 ( Non editable )
Data 23
data 24
Data 31
data 32 ( Editable with drop down )
data 33
data 34
how to achieve this ? please help on this.
Thanks in advance
Thanks
Manish

Manish,
there is no proper way to insert two Cell Editors in a column(except variants), have a look on below scenario, it may help.
add one more attribute to your table context node for read-only.
create dropDown as celleditor for table and bind with newly created attribute to read-only property of dropdown.
before binding data to table, check the condition then mention readonly value abap_true / false.
@ we can achieve by the use of Variants.
for ex :
Data 11
Data 12 ( Editable with Drop down)
data 13
read-only - abap_false
Data 21
Data 22 ( Non editable, dropdown )
Data 23
read-only - abap_true
Data 31
data 32 ( Editable with drop down )
data 33
read-only - abap_false

To make table cell as read-only based on some condition

Hello ABAPers,
I have a requirement to make the cell in the table of a Web Dynpro component read-only. There are 4 fields in the Table of a view which is mapped to the Context attribute, i.e. function, Number, Description etc. When the value of the Field 'Function' is
'0000016', I have to make the Number field as READ-ONLY(non-editable).
As suggested in SDN forums, I have created the sub-node to the main node in Context and added an attribute 'READ_ONLY'. I have made the cardinality as 1:1. I have also created the Supply Function Method(ZREADONLY) for sub-node that I have created and also set the context binding to the Read only property of the field 'Number' in the View Layout.
PFB the coding I have done in supply function method for setting the read-only attribute for the number field, but it is not working. Could anyone let me know what is the change I have to make this work?
DATA ls_parent_attributes TYPE wd_this->element_partner_h.
DATA l_partner LIKE ls_parent_attributes-partner _fct
Constants c_parent LIKE ls_parent_attributes-partner_fct VALUE '000016'.
DATA ls_zread_only TYPE wd_this->element_zreadonly
parent_element->get_static_attributes(
   IMPORTING
          static_attributes = ls_parent_attributes).
CLEAR l_partner.
l_partner = ls_parent_attributes-partner_fct.
IF l_partner = c_partner.
    ls_zread_only-readonly = abap_true.
     node->bind_structure(
     new_item = ls_zread_only
     set_initial_elements = abap_true ).
ELSE.
    CLEAR ls_zread_only-readonly.
    ls_zread_only-readonly = abap_false.
    node->bind_structure(
     new_item = ls_zread_only
     set_initial_elements = abap_false ).
ENDIF.
Thanks for your time!
Regards,
M M Jaffer

Hi,
the solution is quite simple.
Bind the property reaonly in the layout editor to the property readonly of the context-attribute.
Therfore you have to click at the binding button of the celleditor of the property read-only.
Then you select the radiobutton in front of Bind to the property of the selected Attribute and choose Property R.
In you coding you have to fo the following in case you do that after binding the itab to the context:
node->bind_table( .... ).
data lt_elements type wdr_context_element_set.
lt_elements = node->get_elements( ).
LOOP at lt_elements into element.
element->get_attribute(
      exporting
        name = 'PARTNERFCT'
      importing
        value = lv_partnerfct
if lv_partnerfct eq c_partner.
    call method lo_el_position->set_attribute_property
      exporting
        attribute_name = 'PARTNERFCT'
        property       = element->e_property-required
        value            = 'X'.
else.
    call method lo_el_position->set_attribute_property
      exporting
        attribute_name = 'PARTNERFCT'
        property       = element->e_property-read_only
        value            = ''.
endif.
endloop.
Of corse you have to modify the coding and i didn´t checked the syntax, baut this should help.
Best regards, Matthias

Based on some conditions table rows should be of different color

Hi Experts,
I have created one WD application which calls RFC. The displayed result is
Trip No    Date                 Status
1             01-jan-2009     Approved
2             05-jan-2009     Rejected
3             09-jan-2009     Cancelled
I want to ensure that row no 1 should be of color 1 (say green color), row no 2 should be of color 2 (say red color) and row no 3 should be of coor 3 (say black color).
How I can do so?
Regards,
Gary

Hi
Please go through this forum, this will help you:
1. How to enable alternating color in a table rows?
2. How to Change the color of rows in a table
3. how to set table alternating color
Thanks
Susmita

In my output fianl int. table how to display 'X' based on some conditions

Hi,
can somebody tell me
how to populate the value in my fianl table as 'X'.This is my requirement.How to do???
In the LOOP on lt_stpox, if lb_recursive is set to X, then populate gs_output-rekri = X for all components for material.
this is my coading.
*Panthom item check
   IF p_phant = c_x .
      DELETE lt_stpox WHERE dumps = c_y.
    ENDIF.
    CLEAR lb_recursive.
    READ TABLE lt_stpox TRANSPORTING NO FIELDS WITH KEY rekri = 'x'.
    IF sy-subrc EQ 0.
      lb_recursive = 'X'.
    ENDIF.
    DELETE lt_stpox WHERE rekri = c_y.
    LOOP AT lt_stpox INTO ls_stpox.
*Move header data to final table.
      MOVE-CORRESPONDING ls_topmat TO gs_output.
*move comonent data to final table.
      MOVE ls_stpox-ojtxp TO gs_output-maktx1.
      MOVE ls_stpox-idnrk TO gs_output-idnrk.
      MOVE ls_stpox-mngko TO gs_output-menge.
      MOVE ls_stpox-rekri TO gs_output-rekri.
      MOVE ls_stpox-meins TO gs_output-meins.
      MOVE ls_stpox-stufe TO gs_output-dglvl.
      APPEND gs_output TO gt_output.
    ENDLOOP.
    CLEAR: gs_output,ls_stpox,ls_topmat.
ENDLOOP.
ENDFORM.                    " BUILD_OUTPUT

Hi,
As per my understanding of your question, You are checking whether lt_stpox-rekri = 'X' in below code and then you are setting lb_recursive as 'X' accordingly.
CLEAR lb_recursive.
READ TABLE lt_stpox TRANSPORTING NO FIELDS WITH KEY rekri = 'x'.
IF sy-subrc EQ 0.
lb_recursive = 'X'.
ENDIF.
DELETE lt_stpox WHERE rekri = c_y.
And after that you are looping at lt_stpox to populate final internal table.
So, instead of doing this, you can directly loop at table lt_stpox and in loop check if lt_stpox-rekri = 'X', if yes then gs_output-rekri = X.
Refer below code.
LOOP AT lt_stpox INTO ls_stpox.
If ls_stpox-rekri eq 'X'.
gs_output-rekri = X.
Endif.
*Move header data to final table.
MOVE-CORRESPONDING ls_topmat TO gs_output.
*move comonent data to final table.
MOVE ls_stpox-ojtxp TO gs_output-maktx1.
MOVE ls_stpox-idnrk TO gs_output-idnrk.
MOVE ls_stpox-mngko TO gs_output-menge.
MOVE ls_stpox-rekri TO gs_output-rekri.
MOVE ls_stpox-meins TO gs_output-meins.
MOVE ls_stpox-stufe TO gs_output-dglvl.
APPEND gs_output TO gt_output.
ENDLOOP.
CLEAR: gs_output,ls_stpox,ls_topmat.
ENDLOOP.
Hope it helps.
Thanks,
Archana
Edited by: Archana Pawar on Feb 1, 2010 11:43 AM

IDOC-File - records in Idoc to file based on some condition

Hello experts,
I have a idoc to file scenario. the incoming Idoc can have multiple records in it and i have to map these records to a csv file. Now the problem is not all records has to be mapped to the file. Based on the value of a perticular file (which is not root), i need to decide if the entire record has to be processed or not. Like the idoc structure is say:
IDOC
   E1WPA01            0....9999
      E1WPA04         0...99
          KONDART     0..1
Now for all valid E1WPA01 where the value of KONDART equals to some spacified value (known) , there has to be one record in the target csv file.
How can this be done at the root level?
One way of doing is we give empty values in the target file where the condition of KONDART is not fulfilled. Say if there are 10 records of E1WPA01 and only 4 satisfies the condition, we will ahve 10 records in the output file but only 4 records will have value and the rest 6 will be blank like (,,,,,,,). But I dont want this. I want only 4 records in the output file.
I tried mapping like this:
E1WPA01----
>Advanced -
> Root
E1WPA04-KONDART---->UDF
The problem i am facing here is if 4 records fulfill the condition, the first 4 are taken and the revelent 4.
Please help.
Regards,
Yash

Hi Chirag,
I wrote the following code in UDF:
for(i=0;i<a.length;i++)
if(a{i}.equals("Specified Values"))
result.addValue("a{i}");
else
result.addValue(ResuktList.SUPPRESS);
And its working partially. I mean the queue of the UDF looks like
1. AAAA                      SUPPRESS
2. <Specified value>     <Specified value>
3. AAA                        SUPPRESS
4. AAA                        SUPPRESS
5. AAA                        SUPPRESS
6. AAA                        SUPPRESS
7. <Specified value>     <Specified value>
8. AAA                        SUPPRESS
9. AAA                        SUPPRESS
and it creates 2 ROOT nodes. But the root nodes are created for line 2 and line 8 insteed of 7.
What can be problem??
Yash

Calling two table controlls based on some conditions......

Similar Messages

Maybe you are looking for