Calling webservice from Peoplecode to upload pictures

Hi,
I need to create and call a webservice from Peoplecode to upload pictures from a SQL server database. Has anybody done this before?
Does anybody have a sample peoplecode which calls a webservice?
We are on PS 9.1 using Oracle 11g database.
Any help is appreciated.
Thanks,
Les

sanju.sinha wrote:
What makes you think that calling Web service from XSLT is possible?It is possible.
Can you give evidence? Please find the below link.
http://bytes.com/topic/xml/answers/854477-http-post-xslt
Not really. That, obviously, used an extension. Thus the xslt called out to some other process. It is similar to java using JNI.
So the answer based on that.
1. Write java code (not xstl) to do what you want
2. Figure out how to add that java code into your xslt processor as an extension.
3. Use it that extension in your xslt.
Note that the fact that above can be done doesn't mean it is a good idea.
If it was me and I got to the point where it looked like that was required (in xslt) then I would question the design and even the architecture/requirements.

Similar Messages

XML Error while calling webservice from oracle function.

I am getting an error while I am trying to call webservice from oracle function. Any ideas? Thanks.
select get_new_string ('proxy:80', 'http://xxx/PatternVariations/SourceTest/WebMethods','Scott') from dual
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00225: end-element tag "H4" does not match start-element tag "P"
Error at line 9
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at "DORSBP00.DEMO_SOAP", line 82
ORA-06512: at "DORSBP00.GET_NEW_STRING", line 11

The error message implies that the web service is returning something that is not well formed xml. Can you verify what is being returned by the web service call

Call webservice from PJC over https protocol

Hello!
I have problem calling webservice from PJC.
The webservice is on https server so I must declare the keystore and truststore...
I have generated java classes from wsdl file with SOPAUI and axis 1.0...
Then I have made a code which integrate axis library, jsee ...
On the client side all works fine (with jdk 1.3 compiler)
When I deploy it on oracle forms server and call it from oracle form I get the error:
java.net.MalformedURLException: unknown protocol: https
in this way I register the certificate..
private void registrirajCertifikat(String direktorij, String password,
        String keyStore, String trustStore) {
       System.out.println("keystore: " + direktorij + keyStore);
        System.out.println("trust: " + direktorij + trustStore);
        System.out.println("========================================");
        System.setProperty("javax.net.ssl.keyStore", direktorij + keyStore);
        System.setProperty("javax.net.ssl.keyStorePassword", password);
        System.setProperty("javax.net.ssl.keyStoreType", "pkcs12");
        System.setProperty("javax.net.ssl.trustStore", direktorij + trustStore);
        System.setProperty("javax.net.ssl.trustStorePassword",   password);
        System.setProperty("javax.net.ssl.trustStoreType", "jks");
        System.out.println("========================================");
        System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
        Security.addProvider( new com.sun.net.ssl.internal.ssl.Provider() );
    }I have my kestore and truststore located on http server..
Every time the bean is initializzed I download the keystore and truststore to my java.tmp.dir
The same code in Jdeveloper works fine.. also in cmd prompt.. but in oracle forms I can't get it to run..
anybody can help me?
this is my console output when running a form:
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\peterv.IN2SLO
Proxy Configuration: no proxy
JAR cache enabled
     Location: C:\Documents and Settings\peterv.IN2SLO\Oracle Jar Cache
     Maximum size: 50 MB
     Compression level: 0
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
q:   hide console
s:   dump system properties
t:   dump thread list
x:   clear classloader cache
0-5: set trace level to <n>
Loading http://dekani:7777/forms/java/frmall_jinit.jar from JAR cache
Loading http://dekani:7777/forms/java/images.jar from JAR cache
Cached copy of http://dekani:7777/forms/java/in2kartica.jar
** DOKUMENTNI SISTEM   **
** PJC bean                     **
zacetek
http://10.1.2.235/in2/asarh.pfx
Copying resource (type: application/octet-stream, modified on: Dec 18, 2009 12:39:35 PM)... to: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\asarh.pfx
3794 byte(s) copied
http://10.1.2.235/in2/arhaskeystore.jks
Copying resource (type: application/octet-stream, modified on: Dec 18, 2009 12:39:35 PM)... to: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\arhaskeystore.jks
3800 byte(s) copied
Registriramo nastavitve za SSL
keystore: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\asarh.pfx
trust: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\arhaskeystore.jks
========================================
po registraciji nastavitev za SSL
========================================
https://hosting.arhiviraj.si/webservice2/InDocArchiveWS.asmx
--> napaka: *java.net.MalformedURLException: unknown protocol: https*
java.net.MalformedURLException: unknown protocol: https
     at java.net.URL.<init>(Unknown Source)
     at java.net.URL.<init>(Unknown Source)
     at java.net.URL.<init>(Unknown Source)
     at in2.mikrocop.Test.dokumenti(Test.java:94)
     at in2.mikrocop.Test.testiranje(Test.java:66)
     at in2.mikrocop.Test.<init>(Test.java:49)
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Unknown Source)
     at oracle.forms.ui.VBean.instantiateBean(Unknown Source)
     at oracle.forms.ui.VBean.setProperty(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

I have tryed tu run my example with Jinitiator "java" like
c:\java -jar c:\in2kartica.jar
and all works fine..
I don't know why the same example won't run inside oracle form as javabean?!?
this is my cmd console
C:\jdk\bin>java -jar c:\in2kartica.jar
** DOKUMENTNI SISTEM   **
** PJC bean            **
keystore: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\asarh.pfx
trust: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\arhaskeystore.jks
========================================
po registraciji nastavitev za SSL
========================================
https://hosting.arhiviraj.si/webservice2/InDocArchiveWS.asmx
unknown attr1.3.6.1.4.1.311.17.1
Dolzina: 91 <------------ this is the result from webservice located on address above

Call Webservice from Bridge

Hi
I need to create a palette in bridge which will interact with webservice and create a treeview. I do not know how to call webservice from adobe bridge. Can anybody help me?

Hi
I need to create a palette in bridge which will interact with webservice and create a treeview. I do not know how to call webservice from adobe bridge. Can anybody help me?

Related documents or links on how to call webservices from WDJ

Hi all
i need documents & links on how to call webservices from Webdynpro for Java.
if anybody send the documents on sample scenarios on the same then it is the great help to me...
Thanks
Sunil

Hi Sunil,
May these links help you.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/f289c67c759a41b570890c62a03519/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/64/0e0ffd314e44a593ec8b885a753d30/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/0357425e060d53e10000000a155106/frameset.htm
and the below thread to call weservices in java.
Re: How to call a web service from Java
Regards,
Supraja

How to call webservices from ADF page

Hi,
I am using ADFBC.
I want to call webservices from ADF page.please give examples of sample program on how to call a web service from the ADF pages.please give examples.
please help me.
Thanks,

http://marianne-horsch-adf.blogspot.com/2011/03/how-to-create-web-service-based-adf.html
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/70-dependent-listboxes-using-ws-286107.pdf
http://www.oracleimg.com/technetwork/developer-tools/jdev/adfcomplexwstypes-101013.html
http://technology.amis.nl/blog/9726/quickly-creating-reploying-and-testing-a-webservice-interface-for-adf-business-components
http://oracamp.com/passing-parameters-between-web-services-and-jsf-pages

Is it possible to call Webservice from VB 6.0?

Is it possible to call Webservice from VB 6.0?
Regards,
Krishanu ray

Hi
Please check following links.
Calling Web Services from Visual Basic 6, the Easy Way
SAP PI integration with VB 6.0
Thanks,
Dipak Patil

Calling webservice from Flex?

Hi,
I get the error when I call webservice from Flex.Can you tell
me why this happen?
Thanks
Mark
[RPC Fault faultString="Security error accessing url"
faultCode="Channel.Security.Error" faultDetail="Destination:
DefaultHTTP"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at DirectHTTPMessageResponder/securityErrorHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()

I think this means that the source of the web service does
not have a crossdomain.xml file on it allowing access from your
site. Try adding one to the root of the server and see if that
fixes the problem.
hth,
matt horn
flex docs

Calling webservices from ABAP via https/ssl with p12 certificates.

Hi all,
I have a problem with calling an external webservice via HTTPS.
I configured my system as indicate in the blog /people/jens.gleichmann/blog/2008/10/31/calling-webservices-from-abap-via-httpsssl-with-pfx-certificates but when I check the RFC connection the result is: ICM_HTTP_SSL_ERROR.
I check the ICM monitor and this is the result:
[Thr 11] Thu May 26 16:02:57 2011
[Thr 11] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 11]    session uses PSE file "/usr/sap/SV5/DVEBMGS10/sec/SAPSSLHTTPS1.pse"
[Thr 11] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536875072 (0x20001040) = "received a fatal SSLv3 handshake failure alert message from the peer"
[Thr 11] >>            Begin of Secude-SSL Errorstack            >>
[Thr 11] WARNING in ssl3_read_bytes: (536875072/0x20001040) received a fatal SSLv3 handshake failure alert message from the peer
WARNING in ssl3_output_cert_chain: (12354/0x3042) No hierarchy certificate in FCPath
WARNING in reduce_FCPath_by_Issuer: (12354/0x3042) No hierarchy certificate in FCPath
[Thr 11] <<            End of Secude-SSL Errorstack
[Thr 11]   SSL_get_state() returned 0x000021d0 "SSLv3 read finished A"
[Thr 11]   Server's List of trusted CA DNames (from cert-request message):
[Thr 11]     #1 " certificate 1
[Thr 11]     #2 " certificate 2
[Thr 11]   SSL NI-sock: local=ip peer=ip2
[Thr 11] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000652010)==SSSLERR_SSL_CONNECT
[Thr 11] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt.c 2012]
SAP_ABA     700     0012     SAPKA70012     Componenti validi per tutte le applicazioni
SAP_BASIS     700     0012     SAPKB70012     Componenti di base SAP
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C     PI_BASIS 2005_1_700
ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
SAP_BW     700     0013     SAPKW70013     SAP NetWeaver BI 7.0
SAP_AP     700     0010     SAPKNA7010     Piatt. d'applicazione SAP
CCM     200_700     0010     SAPK-27010INCCM     CCM 200_700 : Add-On Supplement
SRM_PLUS     550     0010     SAPKIBK010     SRM_PLUS per mySAP SRM
SRM_SERVER     550     0010     SAPKIBKT10     SRM_SERVER
BI_CONT     703     0001     SAPKIBIIP1     Contenuto Business Intelligence
ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04
What do you think about it?
Best regards,
Norberto.

Don´t forget to set your proxy settings! Be sure that the application server could establish a connection to the external server.
From the BLog.
Thr 11 WARNING in ssl3_read_bytes: (536875072/0x20001040) received a fatal SSLv3 handshake failure alert message from the peer
From the Error.
Have you looked into the above details?
Thanks
SM

Is posible call WebServices from Forms???

Hi.
My cuestion is simple. I don´t found information about this.
Can I call webservices from a Forms???. If it´s possible how it is??.
I don´t find anything document.
Thanks and sorry for my english.

Hi!. thnaks for response.
The version is Forms 11g.
FormsEleven thaks!! !!
The webService are in .Net C# in a IIS. There is some problem???.
Edited by: Adama on 30-ago-2010 14:33

Error while calling webservice from oracle8i

Hi,
i am trying to call a webservice from a stored procedure in Oracle 8i.
I am getting the following error.
ORA-31011: XML Parsing failed
ORA-19202: Error occurred in XML processing
LPX-00225: end-element tag "body" does not match start element tag "br"
Kinldy help me in knowing the cause of this issue. Also i wanted to know if
webservices will work in oracle 8i enterprise edition release 8.1.7.4.0
or do we need to add any patches for it.
Thanks,
Sathia

This forum is for XML DB issues. XML DB is a feature of 9iR2 and later.You need t look in the XML Technology forum

How to call webservice from Java application

Hi XI gurus
Pls let me know how to call a webservice from Java application.
I wanted to build synchronous interface from Java Application to SAP using SAP XI
For example, i need to create Material master from Java application and the return message from SAP, should be seen in Java application
Regards
MD

Hi,
If your JAVA Application is Web based application, you can expose it as Webservice.
JAVA People will pick the data from Dbase using their application and will send the data to XI by using our XI Details like Message Interface and Data type structure and all.
So we can Use SOAP Adapter or HTTP in XI..
If you use HTTP for sending the data to XI means there is no need of Adapter also. why because HTTP sits on ABAP Stack and can directly communicate with the XI Integration Server Directly
If you are dealing with the Webservice and SAP Applications means check this
Walkthrough - SOAP XI RFC/BAPI
REgards
Seshagiri

Problem in calling Webservice from Webdynpro ABAP

I want to call a BAPI FM which is available in SAP ECC server when user is clicking on a button in a web dynpro application which is available in SAP Portal server.
For example,
Portal server name is DVP-EPP &
ECC server name is DVP-ECC
I have the done the following steps to achieve it,
In Server DVP ECC:
1) Created Web service from the standard BAPI FM (SE37-->Utilities-->More Utilities-->Create WebService --> From the the Func.Module)
2) Downloaded the WebService as WSDL file from SOAMANAGER
3) Tested the Web service through SE80, it is correctly calling the BAPI & creating necessary data.
In Server DVP EPP:
4) Created a Proxy class as follows,
a) SE80 --> Package --> Create --> Enterprise service
b) Selected Object type "Service Consumer"
c) Selected Service Consumer "Local File"
d) Browsed and selected WSDL file downloaded from DVP ECC
e) Selected the Package, Prefix, Request, Completed the process & Activated it.
5) Configured the Logical port as follows,
a) Selected my Proxy class through F4
b) Wrote a name for Logical port, Selected 'Default port' checkbox and selected 'Create'
c) In the next screen, in 'Call parameters' tab, selected the 'URL' radio button & mentioned the URL of the WSDL-Document created in DVP-ECC system
d) Saved the data & activated it
5) Now, tested the service through (SE80-->Package-->Enterprise Services-->Client Proxy) option.
6) When I test it, system prompts a dialog box for User-Name & Password (as available in DVP-ECC system).
After the details are given, system throws the Information message as "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/" - Exception of class CX_AI_SYSTEM_FAULT
No record is created in DVP-ECC through the WebService BAPI.
Please tell me whether the steps that I followed are correct as per my requirement and a solution for the above interruption.
Thanks in advance

Good day guys,
Somehow I managed to resolve the above error.
Now in DVP-EPP system, I am able to Test the Web service Client Proxy (through SE80) and a record is successfully created in destination system (DVP-ECC).
Now, in Webdynpro I am unable to call this webservice proxy class.
System throws the error,
Error (id=SoapFaultCode:5): Web service processing error; more details in the
web service error log on provider side (UTC timestamp 20141006045544;
Transaction ID 9A144DE49C12F1B5A6B9E41F137BE3CC)
I just created a sample WDA application and on click of a button I am calling the Webservice Proxy class as follows,
Method on_submit_click().
TRY.
      CREATE OBJECT wd_assist
        EXPORTING
          logical_port_name = 'ZLOG_PORT'. "Logic port creatd for Proxy class (in SOAMANAGER)
      CALL METHOD wd_assist->bus1240create     "Method available in generated Proxy Class
        EXPORTING
          input = ls_inp
        IMPORTING
          output = ls_outp.
    CATCH cx_ai_system_fault.
ENDTRY.
ENDMETHOD.
Do I have to do any thing additionally in order to call the WebService in WDA?? Because, in the same system, if I test it in SE80, record is perfectly created in destination server.
Also please suggest if I have to do any other configuration changes related to this.
Keenly awaiting your reply.
Have a nice day .
Thank you.

Problem calling WebService from Oracle Forms created by JDeveloper

Hi All,
I am trying to call a Webservice from Oracle Form using JAVA Class created by Oracle JDeveloper.
The Java Function (in JDeveloper) is as follows:
public Vector GetPIValue(String TagName, String ReadingTime) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
requestBodyEntries.addElement(TagName);
requestBodyEntries.addElement(ReadingTime);
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.send(endpointURL, "http://tempuri.org/GetPIValue", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
return responseBody.getBodyEntries();
When this Class is Imported into Oracle Forms the Function is converted into the following PL/SQL code:
FUNCTION GetPIValue(
obj ORA_JAVA.JOBJECT,
a0 VARCHAR2,
a1 VARCHAR2) RETURN ORA_JAVA.JOBJECT IS
BEGIN
Message('param passed: '||a0||' - '||a1);
cls := JNI.GET_CLASS('oracle/forms/demos/webservice/ConnectToPIStub');
mid := JNI.GET_METHOD(FALSE, cls, 'GetPIValue', '(Ljava/lang/String;Ljava/lang/String;)Ljava/util/Vector;');
args := JNI.CREATE_ARG_LIST(2);
JNI.ADD_STRING_ARG(args, a0);
JNI.ADD_STRING_ARG(args, a1);
Message('I am Here');
RETURN JNI.CALL_OBJECT_METHOD(obj, mid, args);
END;
When I am calling this Function from Within Forms and Passing into it the Parameters, I am displaying some Debugging Messages. When the Code reaches "JNI.CALL_OBJECT_METHOD" there is NO RESPONSE from the Webservice and nothing is moving forward after this Point...
A similar Webservice that can be Tested is:
http://www.webservicex.com/CurrencyConvertor.asmx
with WSDL file:
http://www.webservicex.com/CurrencyConvertor.asmx?wsdl
Kindly note that this Webservice is running properly from the Web Browser but the call from Oracle Forms is not Succeeding!!!! :-((
Any help is much appreciated.
Regards,
Baz

Hi,
Yes, you need to compile your source files with JDK 1.3 (since JInit 1.3.x.x uses JDK 1.3).
Other solution would be to use JRE 1.5 (instead of JInitiator).
Check out [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=550563] on how to use JRE1.5
-Arun

Problem while calling webservice from a plsql stored procedure

Hi everybody,
I need to call a webservice from a plsql stored procedure.
I was following documentation published in the otn at the following link.
"http://www.oracle.com/technology/tech/webservices/htdocs/samples/dbwebservice/DBWebServices_PLSQL.html"
I am encountering the following error on my sql prompt-
SQL> exec dbms_output.put_line(time_service.get_local_time('94065'));
BEGIN dbms_output.put_line(time_service.get_local_time('94065')); END;
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1022
ORA-12545: Connect failed because target host or object does not exist
ORA-06512: at "APPS.DEMO_SOAP", line 65
ORA-06512: at "APPS.TIME_SERVICE", line 13
ORA-06512: at line 1
Has anybody worked on the same example. Please direct me.
Thanks & Regards
Kiran Kumar

Kiran, were you able to solve this?
I am facing the same error.
Oracle Server is Unix and webservice is .NET.
I am able to connect to Java web service.

Calling webservice from Peoplecode to upload pictures

Similar Messages

Maybe you are looking for