CallRex and Cisco Call Connector software
I'm quoting a UC560 solution for a client that needs call recording along with Call Connector. I am interested in CallRex but it appears it is based on TAPI and therefore, unlikely to get it setup in the same environment as Call Connector. Am I correct in assuming I can't get both for the same phones? Anyone have experience with this or any recommendations or workarounds? I'm also looking at TIM Talk, but I may only need to do a few phones and CallRex appears attractive for recording only a few select phones based on their user cost.
thanks,
Steve
Hi Nathan, from my understanding CallRex registers the TAPI under the ephone, correct? The Cisco Call Connector also does the same thing. In the past I've had issues trying to setup the UC system to dial out from a CRM along with having the Cisco Call Connector. In this experience I had an issue as the Call Connector server would register and hold onto the TAPI for that ephone and it broke the dial out function of the CRM. So you are saying to setup a dual endpoint on the Cisco device, one being hard phone and one being a softphone, registering 1 TAPI to CallRex and the other TAPI to Call Connector?
If that's the case though, the softphone would need to be on at all times in order for it to register the TAPI, correct? Am I understanding this or missing something?
Similar Messages
-
Windows 8 and Cisco Call Connector
Hi,
Does Cisco Call Connector work on Windows 8?
We have a customer running Windows 8 and they have encountered the following error when they tried to install it.
Thanks
Raymondtry using PPTP vpn. it will work without Cisco vpn client. below is config example.
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
hope this helps. -
Cisco Call Connector Server Confusion
Hi all, we have a customer who is interested in the Cisco Call Connector Server.
In terms of ordering do I need 1 X SW-UCC-SERVER and then however many client licenses SW-UCC-CLIENT-1? Or are the Client licenses SW-UCC-CME?
Also does anyone know if the Call Connector Client will work over terminal services?
Also can Cisco provide copies for demo purposes?
Any info greatly appreciated.Hi Nathan, from my understanding CallRex registers the TAPI under the ephone, correct? The Cisco Call Connector also does the same thing. In the past I've had issues trying to setup the UC system to dial out from a CRM along with having the Cisco Call Connector. In this experience I had an issue as the Call Connector server would register and hold onto the TAPI for that ephone and it broke the dial out function of the CRM. So you are saying to setup a dual endpoint on the Cisco device, one being hard phone and one being a softphone, registering 1 TAPI to CallRex and the other TAPI to Call Connector?
If that's the case though, the softphone would need to be on at all times in order for it to register the TAPI, correct? Am I understanding this or missing something? -
Connectivity Issue between ASA 5520 firewall and Cisco Call Manager
Recently i have installed ASA 5520 firewall, Below is the detail for my network
ASA 5520 inside ip: 10.12.10.2/24
Cisco Switch 3560 IP: 10.12.10.1/24 for Data and 10.12.110.2/24 for Voice
Cisco Call Manager 3825 IP: 10.12.110.2/24
The users and the IP phone are getting IP from the DHCP server which configured on cisco 3560 Switch.
the Default Gateway for Data user is 10.12.10.2/24 and
for the voice users is 10.12.110.2/24
now the problem is that the users is not able to ping 10.12.110.2 call manager. please if somebody can help in this regard. i will appreciate the prompt response against this issues.Actually i don't wana to insert new subnet and complicate the nework. i need a simple way to solve the problem. below is the details for the asa 5520 config.
ASA Version 8.2(1)
name x.x.x.x Mobily
interface GigabitEthernet0/0
nameif inside
security-level 99
ip address 10.12.10.2 255.255.255.0
interface GigabitEthernet0/1
nameif outside
security-level 0
ip address x.x.x.x 255.255.255.252
object-group service DM_INLINE_SERVICE_1
service-object tcp-udp
service-object ip
service-object icmp
service-object udp
service-object tcp eq ftp
service-object tcp eq www
service-object tcp eq https
service-object tcp eq ssh
service-object tcp eq telnet
access-list RA_VPN_splitTunnelAcl_1 standard permit Inside-Network 255.255.255.0
access-list RA_VPN_splitTunnelAcl standard permit Inside-Network 255.255.255.0
access-list inside_nat0_outbound extended permit ip Inside-Network 255.255.255.0 10.12.10.16 255.255.255.240
access-list inside_nat0_outbound extended permit object-group DM_INLINE_SERVICE_1 10.12.10.16 255.255.255.240 Inside-Network 255.255.255.0
access-list inside_nat0_outbound_1 extended permit ip Inside-Network 255.255.255.0 10.12.10.16 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
ip local pool VPN-Pool 172.16.1.1-172.16.1.30 mask 255.255.255.0
ip local pool VPN-Users 10.12.10.21-10.12.10.30 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-641.bin
asdm history enable
arp timeout 14400
global (inside) 2 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound_1
nat (inside) 1 Inside-Network 255.255.255.0
route outside 0.0.0.0 0.0.0.0 Mobily 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http Mgmt-Network 255.255.255.0 mgmt
http Inside-Network 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet Inside-Network 255.255.255.0 inside
telnet timeout 5
ssh Inside-Network 255.255.255.255 inside
<--- More ---> ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy RA_VPN internal
group-policy RA_VPN attributes
dns-server value 86.51.34.17 8.8.8.8
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RA_VPN_splitTunnelAcl
username admin password LPtK/u1LnvHTA2vO encrypted privilege 15
tunnel-group RA_VPN type remote-access
tunnel-group RA_VPN general-attributes
address-pool VPN-Users
default-group-policy RA_VPN
tunnel-group RA_VPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:e5a64fa92ae465cd7dabd01ce605307d
: end -
Eurocom and Cisco Call release
Hi Pros,
I have a problem here, I been trying to resolve this issue for months.I still dont find out what the magic fix is.
There it is, I have a telecom system: A Gateway PRI, a 2801 which does only translation between the PSTN network and the Iridium Network(satellite-8816), and a few Eurocom Unit connected to the 2801 via FXO port.
The communication flow works great, the issue I am having is sometimes certains calls can stay up for more than 24 hours!!!
When this happens, I have to physicly shutdown the port or reboot the 2801. Still can find out whether this Eurocom common issue or it cisco!
With this issue going on for months, I am pretty sure that we been over-bill our customer.
Any ideas or suggestions are more than welcome and thanks in advance for your help guys.Any ideas guys???!!
-
German Dial Plan Smart Cisco Call Connector Server
Hi everyboddy,
has someone the Dialplan Config for the UCC ?
In the rar Documents in this Forum the Links for the examples are down.
https://supportforums.cisco.com/docs/DOC-11019
Philippjeliasoncisco wrote:Hello. I have a growing practice selling UC500 and would like to know this too. Cisco, please keep selling and developing this. Thanks a million!
Check forums here or talk to your Channel Account Manager.
Cisco doesn't care for the UC500 anymore and will not continue selling it for much longer. -
Cisco call manager and ip phone software.
Hi everybody.
Does Cisco call manager also include software required for ip phone? Or software for ip phone needs to be installed on tftp server and it does not come with cisco call manager.?
thanks and have a great weekend.Hi Sarah,
by ip phone software, do you mean Cisco IP Phone Agent software?
if yes, then you need to have Customer Response Solution (CRS) and Call Manager together to setup ip phone software (services).
check this link for further info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801c5765.shtml
plz Rate if it helped.
Soroush. -
Cisco Call Manager MIB and OID.
Hi,
One of our customer has developed their own NMS software to manage multiple OEM products.
They want to integrate Cisco Call Manager 7.0 and Cisco Router with the NMS software for monitoring/managing of Voice traffic.
The monitoring of CUCM 7.0 will consists of the following-
1. Call History
2. Missed calls.
3. Calls in progress,
4, Dropped Calls.
The Monitoring of Cisco Router will Consists of Interface statistics and Portwise Traffic statistics of LAN and WAN Ports.
I believe this monitoring is done through Call Detailed Record and if I will load the CDR MIBs in NMS software it will be able to log CRD logs from CUCM 7.0.
Please suggest that if the same is possible.??.
kindly help me in getting the MIBs/OIDs for the same.
Best regards,
Puneet K.Hi,
For 200+ users you should better go with Cisco CallManager (CUCM). Although ISR G2 supports 250+ users, it will not provide clustering mechanism and additional HA capabilities as CUCM does.
You can read the Call Processing chapter of the CUCM SRND:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/callpros.html
Hope to help, please remember to rate helpful posts.
Kind regards,
- Adrian. -
Cisco Smart Call Connector / Advanced Client / Server for UC500
Would like to hear from Cisco:
Is there still development in progress on Cisco Smart Call Connector, the advanced client, server and operator involving compatibility and support for Windows 8 / Outlook 2013 / and IE 10 32 and 64 bit ?
Please vote this up if interested !jeliasoncisco wrote:Hello. I have a growing practice selling UC500 and would like to know this too. Cisco, please keep selling and developing this. Thanks a million!
Check forums here or talk to your Channel Account Manager.
Cisco doesn't care for the UC500 anymore and will not continue selling it for much longer. -
Transfer VOIP Calls Between Cisco Desk Phone and Cisco Jabber For IPhone 9.5
Does anyone know how to transfer an active voip call from a Cisco IP Desk Phone to Cisco Jabber for IPhone? I can transfer a call from Cisco Jabber for IPhone to my Cisco IP Desk Phone no problem. I put the call on hold and then click "Resume" on my Cisco IP Desk Phone. However I cannot do the same but the other way around. If I put the call on hold on my Cisco IP Desk Phone, I see "no active call" on my Jabber client. The only information I could find slighlty relevant was using the Mobility Key/Remote Destination Profile feature however this defeats the object as this will forward to an external number, e.g. mobile and I just want to transfer the call within the VOIP environment between the two devices that are using the same directory number.
I am using Cisco Call Manager 9.1(2), Cisco Presence 9.1 and Cisco Jabber for IPhone 9.5.
Any help would be greatly appreciated.
Kind Regards,
Paul Parker.Did you ever find an answer to this ?
I am seeing the same behavior and trying so see if I can put calls on hold and pick them up both ways also.
The only answer I seem to have found is to use park instead
That would/should work but I would just prefer to hold/unhold
Just not sure why we would not be able to hold/unhold on what is essentially a "shared" line
Does anyone have this working for them ? -
Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i downgrade back to my default software?
Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff. -
I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.Can anyone help me?
I updated my ipad to the ios7.4 and my wifi connection just wouldn't work any longer.
-
i have iphone 4 and just updated my software to i.o.s 7 and i have no log and no calls appears in recent calls. what should i do ?????
was ur phone previously jailbroken and Unlocked using this method?
-
Need to disable logs of Received and placed calls in cisco
Hi All,
How and Where do i disable the logs of received and placed calls in cisco phone configuration?
I am using CUCM V7X.
Thanks in advance !!!!I've tried them all and nothing beats Verizon. All around. I live in a building with metal walls and couldn't get reception with my iPhone 5. I looked on eBay and saw a Verizon Wireless Network Extender actually made to Verizon specs by Samsung. I checked the prices and a new one from Verizon was $159.00. I got one on eBay for $59.00 free shipping. Hooked it up, called Verizon for free activation and now I always have 5 bar reception. No additional charges besides purchasing the extender. Out of 5 different providers including AT&T I get the best reception everywhere with Verizon.
Just thought you might want to know. -
Placing, and receiving calls through the iPhone's dock connector.
Can calls be placed and received through the iPhone's dock connector?
For example, assume you have a device, with two connectors, an iPhone dock, and a telephone jack. The device would allow you to connect a standard phone, cordless phone base station, fax machine, etc, and make calls using your iPhone cell service instead of you landline.No, that can not be done.
Maybe you are looking for
-
IPod appears in My Computer but not in iTunes.
I have a 30GB Video iPod, & everytime I plug it in I get a an error message that says: iPodService Module has encountered a problem and needs to close. We are sorry for the inconvenience. I'm not to sure what to do, I've tried the 5 r's & nothing hel
-
Photoshop randomly not applying Lightroom-generated .xml files
Hi there. I have a problem with Photoshop or Lightroom. This has happened to me before, but it's just somehow resolved itself previously. This time it won't. I'm using LR 2.7 and PS CS4 and CS5. I've edited a bunch of Nikon RAW files (NEF) in LR
-
just purchased elements 12 but it won't allow me to size above 416...need to size 2145 X 1050,, anyway to override or get refund to get another photoshop verison that allows higher sizing?
-
Show/hide Section depending upon a field Value
Post Author: breathshadow CA Forum: Formula Hi I am not very good at Crystal Reports.Basically this is what i have to do.in the Details Records if i find Certain Text in a Field,I have to show a section or else..Hide it.here's the formula I useWhileP
-
Before Report Trigger Running Endlessly
Hi all, I got the following query in my before report trigger. But the system is running endlessly without stop. Any advise is appreciated. function AfterReport return boolean is begin delete chart_temp; COMMIT; IF :P_1 IS NOT NULL THEN INSERT I