Calls dropping with new OS

I have a 4s, and updated to the new OS a couple of days ago. Ever since then it has been constantly dropping calls. Any suggestions before I head for the Apple store? And what will they tell me?

Hello Ron,
Thank you for using Apple Support Communities!
I would recommend the troubleshooting from this Troubleshooting Assistant:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Cheers,
Sterling

Similar Messages

Calls dropping with disconnect cause 16 (normal clearing)

I am faicing a strange problem within my voice network.
I am using both VoIP and SS7. For VoIP I am using IPIPGW and for SS7 PGW.
Some calls connect normally but immdeiately drop with disconnect cause 16, or ISDN cause 8090 (which mean normal clearing) .
I have difficulty on tracing the cause as I don't know where to start from.
Can someone indicate any poosible cause for this problem or where to start looking at.

First specify where is the clearing message come from ? where do you see it
also intitate a debug for isdn q.931 messages to get deep into the cause...

Internet connection drops with new HH4....

I recently signed up to a new deal with BT and had to pay for my HH4. I have it all connected up the exact same way as my HH3. I am receiving a faster connection now but am now getting VERY frequent internet connection drops....
My PC is wired to the HH so NOT a wireless issue. I have checked ALL my microfilters and seem to be working. Nothing within my home has changed apart from the homehub. I used to be connectiong at around 6.5Mb, I am now connecting between 7.5 and 8Mb....
9 times out of 10 the connection drops when I receive an incoming call.... but not always. I can make outgoing calls with ZERO issues....

Shand359tbe wrote:
I forgot to state also that I since removed the HH4 and put my old trusty HH3 back into use......... it does the EXACT same thing now.........
BT engineer was out to fix the line in February of this year. A new main box was fitted (which I was billed for) and he also fitted an iplate to the box to allow the hub to be connected without the need for a filter since they are built in.......
an Iplate will not do away with any filters and they will be required on all sockets - unless you mean a filtered faceplate not iplate - 2 sockets 1 adls and 1 phone
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

ABAP proxy client call PI with new client 120 in old business system

Hi all
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
Will it work or we need to do some extra configuration for communication channel.
Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
Thanks in Advance.

Hi Naina ,
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
> hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
Will it work or we need to do some extra configuration for communication channel.
> since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
For this check blog : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Abap proxies ( Client and Server proxies)
Other steps i.e Interface determination/receiver determination are as usual .
Regards ,

Unable to make conference call + calls dropping with iPhone 6? :(

I have an iPhone 6 and i keep experiencing my phone calls randomly dropping out on me. I would sometimes hear a beeping noise and then a 'call failed' message would appear on the screen. Other times the call would just cut off and the screen would go back to the caller information or the home screen. Second problem is that i cannot create a conference call. Please help!

Hi ,
To make the conference call, click here for information.
The dropped calls, is this the one area?
Do you have any problems with texts?
Thanks.

Call dropped by new incoming call

Quite often when I am in the middle of a Lync voice call a new incoming call comes in and causes the live call to be instantly dropped before the incoming call can be ignored.
This does not happen all the time but does happen several times per week and is very frustrating.
What could the issue be?

Hi,
Please check if there is any error message on Mediation Server when the issue happen again.
You can try to update Lync Server 2013 to the latest version and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Iphone4 4.3.3 update - calls drop with static

Ever since I updated to the 4.3.3 iphone update on my iphone 4, I keep having calls that have to be dropped when major static appears on the other persons line from my phone. I thought maybe it was them, but it has happened to every person I have called! It started exactly after I completed the 4.3.3 update on May 8, 2011 and keeps happening since.

I have taken a leap of faith and pressed 'restore to factory settings'.. Yes, it has now given me the option to restore from the last back up (fortunately immediately before attemting the iOS update !!). This is now in progress with 27 mins to go !!
The point of this message is to try to give some confidence to others in the same situation - I had not been in this situation before.
Fingers crossed to be able to find out just how much of the earlier (pre-update attempt) I get back.
Promise to let you know.
Rob

Calling form with new db connection

Hi all,
This is my problem. I have a requirement to call a form from the when-button-pressed trig of a different form and connect to that called form using a different username/password/connect string. I used logout and logon to do it and it works fine for me (or this machine). My problem is that it doesn't work for anyone else. Whenever anyone else tries the same button (including myself logged into the form on a different machine) they get the error ORA-01012 Not Logged On.
I have the following code in the pre-form trigger of the called form :
logout;
Logon ('scott','tiger'| |'@'| |'dev');
AS I said it works for me on this machine. What am I missing? Thanks in advance.
Required info:
Forms [32 Bit] Version 6.0.5.0.2 (Production)
Oracle Toolkit Version 6.0.5.6.0 (Production)
PL/SQL Version 8.0.5.1.0 (Production)
OPerating sys: windows 2000
Database Oracle 8.0.6.1.0

make sure that the same database alias is configured in the tnsnames.ora on all the machines.

CS call drop with Wi-Fi option enabled

My Friend bought Iphone 6 from U.S and using the same in Inida ( Indian SIM ) and facing a unique issue where First MO CS call is getting failed when Wi-Fi option enabled on device. As soon as we Disable Wi-Fi on Device , No such behavior and CS calls works perfectly fine .
As per oerator analysis , such failed calls are not even hitting there network .
Need Apple expert support to identify exact reason for these CS call failures .Why device is behaving in such manner.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Call drop while talking long distance and strange number in log

Talking to relative in NY, call dropped with no dial tone after that. Unplugged all phones, checked the connection box. Dial tone came back after about 15 minutes. Checking the digital phone log revealed that {edited for privacy}was listed as being called 7 times during the time of no dial tone. Looking at the log again showed that {edited for privacy} was called eight times yesterday. About a call a minute to this number. Have no idea what this number is. It seems that everytime the calls are dropped, this is the number in the log. What is happening?

The alarm system checks out OK, strange number was just the system making the regular 28 day call. Calls are still dropping, mostly after talking for a long time. Can call the number back immediately and get connected. Dial tone is not missing for these latest incidents, althought it was missing once in the past. Also have an answering machine that clicks at random as if someone is picking up a phone. Answering machine is set to 4 rings and digial voice answering is set to 6 rings. The whole system worked fine when installed, now is a constant problem. Going to start disconnecting things and probably run a wire from the box directly to one phone. Is there a tracer that can be hooked up to monitor the line?

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

I'm trying to write an Applescript: when I add a file to a folder, I want finder to name it "1" and increment the other files in the folder by 1. i.e. once I drop a new file into the folder, the file originally called "1" will be renamed "2" etc

I'm trying to write an Applescript. I have never used Applescript but my boss has just asked me to write a script so I dutifully nodded and said "Yes Boss"...
The funtionality I need is that I want finder to rename the files in folder when I drop a new file in. When I add the new file (file neame: "1") to a folder, I want to increment the other file names in the folder by 1.
So when I drop a my new "1" file into the folder, the file original file called "1" will be renamed "2", the original file named "2" will be renamed "3" etc
I'm creating a 'stream' of images. When I add a new image i want it to nudge the other images in the folder along.
Thanks guys!

Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/1986834#1986834

[svn] 3127: Updating asdoc to replace the avmplus call with new set of java files.

Revision: 3127
Author: [email protected]
Date: 2008-09-05 14:16:53 -0700 (Fri, 05 Sep 2008)
Log Message:
Updating asdoc to replace the avmplus call with new set of java files.
Removing all files related to asdochelper.
QA: Yes, also please test on non windows platform.
Doc:
Tests: checkintests, asdoc
Reviewed by: Pete Farland
Modified Paths:
flex/sdk/trunk/asdoc/templates/ASDoc_Config_Base.xml
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/modules/compiler/build.xml
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
Added Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsClass.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocHelper.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/QualifiedNameInfo.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/SortComparator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
Removed Paths:
flex/sdk/trunk/asdoc/templates/asDocHelper
flex/sdk/trunk/asdoc/templates/asDocHelper.linux
flex/sdk/trunk/modules/compiler/asdoc/

I had a generic record class that has a HashMap to hold the data fields (...)
method called createRecord() for each record type which would populate the HashMap with the correct data fieldsI'm not sure I understand: are the contents of this field map the same between two records of the same type? Then yes, you don't need to clone the map per record instance.
one thing that needs fixing is the fact that each time the createRecord() method is called I'm creating a new fieldMap to define the dataFields in the record class.Probably, but that will only get you a little bigger files; you won't gain an order of magnitude on the size of files. The problem for huge files is that as soon as their content is bigger than the available memory, you'll run into problems. A more radical approach if you need to address huge files is to process the records on the fly, and not load all records in memory. Of course not all algorithms or business logic can afford that...
I know I could rewrite the code and create a class for each record type and declare the fieldMap static but I was wondering if anyone had any better suggestions The Record instance could receive and keep a reference to its RecordType instance, and ask the RecordType instance the DataType for a field's name. That way the RecordType encapsulates the map, and there's less risk that a clumsy other class modifies the static map.
before I go rewriting a load of code.A load of code?!? Even with the idea of the static map, you only have to edit the enum type (well more accurately, each RecordType enumerated constant's createRecord() method).

BB Drops with Call

Hi, I wonder if someone may be able to help.
We have an issue with our BB dropping out when the phone rings, even when there is no phone connected.
I have done several test with the master socket, and tried different filters. I have dialed 17070 Option 2 and done the line test If I call up with out any filter connected and just a phone its crystal clear, and as soon as the modem is in the noise changes? is this correct?
I have done the adsl speed test, please see the results below.
1. Best Effort Test: -provides background information.
Download Speed
3.96 Mbps
0 Kbps
4 Mbps
Max Achievable Speed
Download speedachieved during the test was - 3.96 Mbps
For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.
IP Profile for your line is - 4 Mbps
2. Upstream Test: -provides background information.
Upload Speed
837 Kbps
0 Kbps
832 Kbps
Max Achievable Speed
Upload speed achieved during the test was - 837Kbps
Additional Information:
Upstream Rate IP profile on your line is - 832 Kbps
These are our adsl status results from the router
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:18:44
Downstream:
4.431 Mbps
Upstream:
1.059 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
21.8 dB / 4.1 dB
Line attenuation (Down/Up):
22.4 dB / 9.4 dB
Output power (Down/Up):
18.3 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
0 / 33
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 9
Error Seconds (Local/Remote):
65 / 49
Thank you for your help in advance?

Which type of master socket do you have?
One of these
Or one of these
Or if you are lucky
One of these
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Having issues with phone calls on my new phone.

Having issues with phone calls on my new phone. Other user is hearing echoes or nothing at all. This seems to be a common issue on here. VERY annoying! Anything seem to fix this problem?

I had similar issues - Turns out it was a hardware problem or bad antennae - Call the tech support number and they can do some testing to determine the issue. They might be able to give you a replacement if you do it quickly.

Calls dropping with new OS

Similar Messages

Maybe you are looking for