Calls forwarded from sip device

I am setting up a callmanager with an h323 gateway.
for incoming and outgoing calls , the customer wants the calls passed to the H323 gateway and then passed to another gateway within the Lan, which has a SIP trunk to the outside world.
Is it just a simple case of having a H323 dial peer on each gateway to pass calls to and from callmanager?

Yes, you need to have the ff dial-peers
On h323 gateway
1. inbound h323 dial-peer from cucm to h323 gateway
2. outbound h323 dial-peer to cucm from h323 gateway
3. Outbound sip-dial-peer from h323 gateway to the sip gateway
4. inbound sip dial-peer from sip gateway to h323 gateway
On SIP gateway
5. inbound sip dial-peer for calls from h323 gateway to sip gateway
6. outbound sip dial-peer to h323 gateway
7. outbound dial-peer for PSTN calls to ITSP
8. You may also have inbound dial-peer from ITSP for inbound PSTN calls

Similar Messages

Re-translate number for calls forwarded from Lync

On a user's desk phone, a call shows up as "315554443333" with 3 being the dial-out code. This way, a user can easily return a missed/received call. In Lync, the call shows up as "+5554443333".
This is fine for Lync users, but if a Lync user were to transfer a call to a desk phone user, the call appears as "+5554443333". The desk phone user can no longer return this call, they would have to dial the digits manually.
How would I go about re-translating this number? Thanks!
It worked for me.

That is correct, PSTN to Call Manager with SIP trunk off to Lync. I am thinking the manipulation needs to occur in Lync, not in Call Manager. We are using several number translations already, here is an example:
OutsideCaller at 555-444-3333 calls InsideUser1 at 222-333-4444. The user has a desk phone and is configured for Enterprise Voice in Lync, so both their DeskPhone1 extension (4444) and their LyncPhone extension (3444) ring. 315554443333 appears
as the Calling Number on DeskPhone1, but +5554443333 appears on LyncPhone.
1. If InsideUser1 forwards a call received on DeskPhone1 from OutsideCaller to InsideUser2 who answers it on their DeskPhone2, it appears on DeskPhone2 as 315554443333 (GOOD).
2. If InsideUser1 forwards a call received on DeskPhone1 from OutsideCaller to InsideUser2 who answers it on their LyncPhone2, it appears on LyncPhone2 as 4444 (BAD, should show original calling party 315554443333).
3. If InsideUser1 forwards a call received on LyncPhone1 from OutsideCaller to InsideUser2 who answers it on their DeskPhone2, it shows on DeskPhone2 as +555444333 (BAD, should display number as 315554443333).
4. If InsideUser1 forwards a call received on LyncPhone1 from OutsideCaller to InsideUser2 who answers it on their LyncPhone2, it shows on LyncPhone2 as +555444333 (GOOD).
I hope this helps to clarify.
It worked for me.

CCME Call Forward from one Hunt Group to another Hunt Group Failure

Hi I have a couple of hungroups in Cisco Call Manager Express. I am trying to configure a Call Forward no answer from one hunt group to another. Does anybody know if this is possible? If so, is there a config available? Here is my config, but it is not working.
Thanks,
Derek
voice hunt-group 20 parallel
final 2290
list 2201,2251,2252
timeout 30
pilot 2209

Hi Derek,
This is supported with the restriction shown below;
final number
Router(config-voice-hunt-group)# final 8888
Defines the last extension in a voice hunt group.
If a final number in one hunt group is configured as a pilot number of another hunt group, the pilot number of the first hunt group cannot be configured as a final number in any other hunt group.
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#72373
Cheers!
Rob

Caller ID no longer shown on calls forwarded from ...

I setup my skype number to forward all calls to my mobile phone and I used to have the caller ID shown correctly for calls incoming to my skype number on my mobile. However, it is suddenly not working in past one week. Is there any setup I need to do to correct it?

I have had exactly the same carry on as you as well as my daughter being in Egypt and missing her calls! I asked about this last YEAR but never got a single solution for it. I also am inundated by cold callers at least 10 times a day + all of their calls just show 'call' which is all I see when my calls are forwarded from Skype. I am cancelling it now and think it should be taken off Skype completely, it is clearly a problem for the majority of users yet has never been addressed or even rectified due to the odd few who state they have no problems with it. It's ridiculous that a company making billions can't listen to the people making the money for them & fix a problem that would probably take 5mins to correct! Surely enough users complaining about the same problem should have been sorted by now? Shameful

Setting Call Forwarding from Off-site

I have managers who want to be able to dial into their main phone line from home and set call forwarding remotely. Is this possible?

The only method I am aware of is to allow them to change their call forwarding via ccmuser.
They would need to have access to your network from home and log in to thier ccmuser page.

Call forwarding from an international Skype number

Ok so here is my setup. I live in Ottawa, Canada and I have an Australian Skype number. What I want to know is, if I put a forwarding number on my australian Skype number to a landline Canadian number and someone from Canada tries to call my Australian Skype number, what rate are they charged when they connect to my forwarded Canadian number and what rate is my Canadian number charged?

To make sure you should contact AT&T but if you set up call forwarding to an international number, you will be the one charged for the international call since your account/phone is dialing the final number.
Again, find out for sure from AT&T who gets the charge.

Track call forwarding from two online numbers

Hi,
I have two online numbers that are being forwarded to one phone number. How can I track separately the calls coming to my online numbers? Right now I can only see the calls altogether to both numbers.
Thanks.
Solved!
Go to Solution.

keibay wrote:
I have a landline number I want to show up when I dial from Skype, I went to set it up so it would show to people I am calling and the verification process is to send a text.. it's not a cell?
Except for a very few countries where you can receive an SMS message at a landline number (someone mentioned Germany as an example, somewhere else in these forums), you are not able to have a landline number show up as your Caller ID when calling from Skype. You are generally limited to using certain Skype Online Numbers or a mobile number that passes the SMS verification process, and that's it for Caller ID with Skype.
Sorry!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Locking down call forwarding

I just started a new job, this company doesn't want call forwarding from phones but one of the high level vendors was allowed to have his phone sent to just one number. The last technician figured out how to disallow the change of the forwarding number he set in call manager. I can't for the life of me figure out how he did it. When I set a number in call manager the phone is still allowed to change the number locally and reset it in call manager. I'm really interested to know how he did this.

Hi
In case you want to lock down the call forwarding, you can just remove the CFA button from the softkey template from all the phones. This would prevent users from doing from the phone.
The only option would now be the ccm end user page. In case you want to remove from there as well, use the following enterprise parameter on CCM Administration page :
Show Call Forwarding :This parameter determines whether end users can configure all, none, or specific call forwarding
directives for their phone(s) when using the Cisco Unified CM User Options (ccmuser) window. Call forwarding
options are not provided regardless of the setting in this parameter if the phone template assigned to the user's device does not support call forwarding
With this, what ever CFA settings you put on the phone, users won;t be able to change that.
Regards
Aditya

Call Forwarding Breaks with iOS 8.3 Update on iPhone 6 and iPhone 6 Plus with AT&T

Ever since the iOS 8.3 Update, call forwarding is no longer working on my iPhone 6 Plus. I have spent dozens of hours troubleshooting with both AT&T Advanced Business Technical Support as well as many hours with top technicians from Apple at my local Genius Bars.
This is a critical bug for me as I used to use the call forwarding option multiple times a day, EVERY DAY, because when I am in certain business locations my mobile phone gets no reception and calls go right to voice mail. I need to have them forwarded to the land line I'm located at.
APPLE, PLEASE HELP!!!
I've done extensive testing, and this seems definitely to be related to Apple iOS 8.3, and it seems to be specific to the iPhone 6 and iPhone 6 Plus ONLY.
To illustrate the EXACT problem:
A: Settings -> Phone -> Call Forwarding
B. Call Forwarding - Turn on
C. Enter Number and return to previous screen by touching the blue "Call Forwarding" to return to previous screen.
D. Call forwarding button is "green" for a split second, then returns to previous OFF state and no forwarding number is displayed. DOES NOT WORK.
NOT AN AT&T PROBLEM. IF SOMEONE IS EXPERIENCING THIS WITH OTHER CARRIERS PLEASE COMMENT HERE.
Further validation this is isolated to iOS 8.3 on the iPhone 6 and 6 Plus ONLY and not the sim card from AT&T...
Here are the latest steps I did with my AT&T sim card and my wife AT&T sim card (she has an iPhone 5s):
1. Removed my sim and put it in the 5s. The phone said that a "carrier update" was required and I selected "NO" to that prompt. Call forwarding functionality worked as expected on the 5s running iOS 8.3
2. I removed the sim from the 5s and re-inserted it. This time I selected "YES" to do the carrier update to eliminate that as a variable, and the call forwarding functionality still worked as expected.
3. I then placed my wifes sim in my 6 Plus. Call forwarding functionality does NOT work on the 6 Plus (was not prompted for carrier update). Also, keep in mind this is my second phone (Apple provided me with a new iPhone 6 Plus when they couldn't resolve the problem at the Genius Bar after hours of troubleshooting).
Note: I did one additional test which as interesting: I put my sim in the 5s and turned call forwarding "on". Then, I put the sim back into my 6 Plus. The calls were still being forwarded to the number I put in while it was in the 5s, but the call forwarding interface in the 6 Plus showed that it was NOT forwarding calls. I could not turn OFF the call forwarding from the 6 Plus and had to put the sim back into the 5s in order to turn off the call forwarding.
If anyone has an update on this, or any other suggestions please advise! This is a critical issue for me as when I travel and when I am in poor areas of reception I need to forward calls. This is a featured I was using multiple times a day, EVERY DAY.
APPLE????????? HELP!!!!!!

Yes, I am dealing with this right now on at&t with a 6 plus. I've been down the same road as you. I got it to work with a windows phone yesterday but not my 6 plus when I switched back to the iPhone. My wifes 6 works fine. I believe it is an at&t issue and not an 8.3 issue. After dealing through several levels of support at at&t, they are telling me it has to do with their transition to hd voice. Some people are having this issue because they are updating their system and some peoples phone profile, on phones that have hd voice capabilities, are not getting added to their line and call forwarding will not work without it. I have a trouble ticket open to their engineering dept and they promise it will work for me on or before the 24th of april. Engineering has to build my phones profile so call forwarding will work with my iPhone.
This is frustrating because like you, I need to forward my calls because I have no signal in my office and need to forward to another phone so I can get my calls. If at&t would quit dragging their feet and enable wifi calling, this wouldn't be an issue for me. I would suggest you put more pressure on at&t and escalate this until it gets resolved. Or put your sim in a phone that does not have hd voice capability and see if it works then.
Good luck. I'm keeping my fingers crossed this will be fixed for me on or before the 24th. We'll see.
EDIT: I see you did put it in another phone and it worked. That backs up that the issue is at&t and their hd voice upgrades. They had no explanation as to why some work and some don't, but have them make sure a profile for your phone is on the line. If not, they'll need to build one for the phone so that it''l work. At least that's the story for now. Like I said, I'll know more in a day or two.

Setup call forwarding

I can't setup call forwarding to my mphone phone. I'm getting the error that I need to use the international dialing standard. I used (with and without spaces): +1236xxxxxxx 1236xxxxxxx xxxxxxx Where xxxxxxx is my actual phone number. Is it because the 236 area code is new, or how does this international dialing format supposed to look like?

Hi Xibir,
Oh no! Call forwarding is a great feature, and I am sad to hear that your having issues activating this feature. Let's get this fixed. To set an Immediate Call Forwarding from your work phone,
• Dial *72 then the 10-digit phone number of your personal phone.
• press Send and wait for confirmation beeps/message, and
• press End.
If this does not work, please accept my follow & send us a Private message with your work mobile number. We can set this forwarding up for you.
Thanks,
PamelaF_VZW
Tweet us @vzwsuport

Activate a call forward with a Third-party SIP Device or with a analog device

Hi,
In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?
I want to activate a call forward like a Alcatel or Aastra PBX with a code.
For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.
It's possible?
Thanks.

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.
Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.
For FXS that's only doable if you're running SCCP
http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

CME, Call forward to CUE from CCM IP phone

I want to call forward the call from CCM IP phone to CME ephone's voicemail which setup in CUE. works okay between CME ephones. configured voice service as follows but no luck. what did I missing to implement?
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
-CCM4.1.3, configured H225 trunk. leave uncheck the MTP on the trunk device
-gatekeeper to connect between CCM and CME
-CME3.3, h323 to gatekeeper and sip to CUE
-CUE2.1
Thanks in advance,

It works by restart the CME router and have a question the sip-ua output. I have two media streams but the 2nd shows "STREAM_IDLE". I think this is for g729 connected to CCM via h323 gk. Can I get an explanation why?
CME#sh sip-ua calls
SIP UAC CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 4083132006
Called Number : 4211
Bit Flags : 0x101A0030 0x100000 0x500
CC Call ID : 95
Source IP Address (Sig ): 10.253.66.254
Destn SIP Req Addr:Port : 10.253.66.2:5060
Destn SIP Resp Addr:Port: 10.253.66.2:5060
Destination Name :
Number of Media Streams : 2
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 95
Stream Type : voice-only (0)
Negotiated Codec : g711ulaw (160 bytes)
Codec Payload Type : 0
Negotiated Dtmf-relay : inband-voice
Dtmf-relay Payload Type : 0
Media Source IP Addr:Port: 10.253.66.254:16998
Media Dest IP Addr:Port : 10.253.66.2:16904
Orig Media Dest IP Addr:Port : 0.0.0.0:0
Media Stream 2
State of the stream : STREAM_IDLE
Stream Call ID : -1
Stream Type : voice+dtmf (1)
Negotiated Codec : No Codec (0 bytes)
Codec Payload Type : 255 (None)
Negotiated Dtmf-relay : inband-voice
Dtmf-relay Payload Type : 0
Media Source IP Addr:Port: 10.253.66.254:17120
Media Dest IP Addr:Port : 0.0.0.0:0
Orig Media Dest IP Addr:Port : 0.0.0.0:0
Number of SIP User Agent Client(UAC) calls: 1
SIP UAS CALL INFO
Number of SIP User Agent Server(UAS) calls: 0
CME#sh sccp connections
sess_id conn_id stype mode codec ripaddr rport sport
1 2 xcode sendrecv g711u 10.253.66.254 2000 16518
1 1 xcode sendrecv g729 10.253.66.254 2000 17620
Total number of active session(s) 1, and connection(s) 2

Unable to place call on calls on hold - SIP Trunk from CUCM to CUBE and from CUBE to ISTP

Hi Cisco Community,
I have a SIP Trunk setup between the CUCM and CUBE and another SIP Dial Peers from the CUBE to the ITSP. All incoming/outgoing calls, DTMF-Relay works well except one thing which is the ability to hold the call.
On the SIP Trunk from the CUCM to the CUBE, I did not select “MTP” because when I do so, I am forced to select my preferred MTP codec which when selected G.729/G.729a, all my outgoing calls goes out using G.729r8. This codec works well for most of the calls until the ITSP replies back with G.729br8. When this condition occur, my call simply fails (this is very intermittent and only some random numbers).
That said, I have some issues with DTMF Relay when I select MTP on the SIP Trunk. DTMF Relay only works if the call is G.729r8 all the way from the CUCM to the ITSP. If the ITSP replies back with G.729br8, the call might established but will simply be “voice-only”.
The current setup is no MTP is selected and everything is working perfectly. I am happy with that until I place a call on hold, which when I do so, the call immediately terminate. Could you please help me understand why?
I have all media resources configured such as G.729r8 MTP, G.729br8 MTP, G.711u MTP, Transcoding with all codecs, etc. All MRG and MRGL are configured on all devices and SIP Trunks.
Below is an example of a call that is connected with the current setup:
Note:
IP: 10.18.81.2 (CUBE)
IP: 10.18.81.11 (CUCM SUB)
IP: 10.111.111.254 (ITSP SBC)
PM-HO-VG-01#
PM-HO-VG-01#
Nov 30 11:44:29.938: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence, kpml
Supported: X-cisco-srtp-fallback,X-cisco-original-called
Call-Info: <sip:10.18.81.11:5060>;method="NOTIFY;Event=telephone-event;Duration=500"
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
Session-Expires: 1800
Contact: <sip:[email protected]:5060>
Max-Forwards: 70
Content-Length: 0
Nov 30 11:44:29.942: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:29.946: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1417347869
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.18.81.2:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Session-Expires: 1800
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 301
v=0
o=CiscoSystemsSIP-GW-UserAgent 7676 6958 IN IP4 10.18.81.2
s=SIP Call
c=I
PM-HO-VG-01#N IP4 10.18.81.2
t=0 0
m=audio 22256 RTP/AVP 18 0 8 101
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Nov 30 11:44:29.950: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Nov 30 11:44:30.658: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 180 Session Progress
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Session: Media
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:30.662: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2747 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:31.226: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 180 Session Progress
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Session: Media
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
X-BroadWorks-Correlation-Info: bbf9
PM-HO-VG-01#4839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept: application/media_control+xml,application/sdp,application/xml
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 10.111.111.254
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC81D00
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:31.634: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2747 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:31.726: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72075e3a02c1
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence, kpml
Content-Type: application/sdp
Content-Length: 236
v=0
o=CiscoSystemsCCM-SIP 9082578 1 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 10.18.80.40
b=TIAS:8000
b=AS:8
t=0 0
m=audio 21928 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 10.18.80.40
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
PM-HO-VG-01#
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 10.18.80.40
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
PM-HO-VG-01#sh sip
PM-HO-VG-01#sh sip-ua call
PM-HO-VG-01#sh sip-ua calls
Total SIP call legs:2, User Agent Client:1, User Agent Server:1
SIP UAC CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 27218091323
Called Number : 0862000000
Bit Flags : 0xC04018 0x10000100 0x0
CC Call ID : 64511
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : [10.111.111.254]:5060
Destn SIP Resp Addr:Port: [10.111.111.254]:5060
Destination Name : 10.111.111.254
Number of Media Streams : 1
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Mode : flow-through
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 64511
Stream Type : voice+dtmf (0)
Stream Media Addr Type : 1
Negotiated Codec : g729br8 (20 bytes)
Codec Payload Type : 18
Negotiated Dtmf-relay : rtp-nte
Dtmf-relay Payload Type : 101
QoS ID : -1
Local QoS Strength : BestEffort
Negotiated QoS Strength : BestEffort
Negotiated QoS Direction : None
Local QoS Status : None
Media Source IP Addr:Port: [10.18.81.2]:22256
Media Dest IP Addr:Port : [10.111.111.254]:20074
Options-Ping ENABLED:NO ACTIVE:NO
Number of SIP User Agent Client(UAC) calls: 1
SIP UAS CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 0218091323
Called Number : 0862000000
Bit Flags : 0xC0401E 0x10000100 0x80004
CC Call ID : 64510
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : [10.18.81.11]:5060
Destn SIP Resp Addr:Port: [10.18.81.11]:5060
Destination Name : 10.18.81.11
Number of Media Streams : 1
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Mode : flow-through
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 64510
Stream Type : voice+dtmf (1)
Stream Media Addr Type : 1
Negotiated Codec : g729br8 (20 bytes)
Codec Payload Type : 18
Negotiated Dtmf-relay : rtp-nte
Dtmf-relay Payload Type : 101
QoS ID : -1
Local QoS Strength : BestEffort
Negotiated QoS Strength : BestEffort
Negotiated QoS Direction : None
Local QoS Status : None
Media Source IP Addr:Port: [10.18.81.2]:22350
Media Dest IP Addr:Port : [10.18.80.40]:21928
Options-Ping ENABLED:NO ACTIVE:NO
Number of SIP User Agent Server(UAS) calls: 1
PM-HO-VG-01#
PM-HO-VG-01#
PM-HO-VG-01#
As you can see, the call is connected and everything is working perfectly. When I press the hold button, here is what I get:
NOTE: I have # debug ccsip messages and #debug ccsip calls (running)
PM-HO-VG-01#
PM-HO-VG-01#
Nov 30 11:44:49.210: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 102 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Contact: <sip:[email protected]:5060>
Content-Type: application/sdp
Content-Length: 244
v=0
o=CiscoSystemsCCM-SIP 9082578 2 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 0.0.0.0
b=TIAS:8000
b=AS:8
t=0 0
m=audio 21928 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=inactive
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Nov 30 11:44:49.218: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:49.218: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC9241
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1417347889
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.18.81.2:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Length: 271
v=0
o=CiscoSystemsSIP-GW-UserAgent 7676 6959 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 0.0.0.0
t=0 0
m=audio 22256 RTP/AVP 18 101
c=IN IP4 0.0.0.0
a=inactive
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC9241
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 102 INVITE
Timestamp: 1417347889
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Supported:
Accept: application/media_control+xml,application/sdp,application/xml
Contact: <sip:[email protected]:5060;transport=udp>
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 360
v=0
o=BroadWorks 316169737 2 IN IP4 10.111.111.254
s=-
c=IN IP4 0.0.0.0
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
a=inactive
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 0.0.0.0
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.282: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECA2633
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:49.282: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Length: 271
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2748 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 0.0.0.0
t=0 0
m=audio 22350 RTP/AVP 18 101
c=IN IP4 0.0.0.0
a=inactive
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Nov 30 11:44:49.282: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72094953dfea
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: presence
Content-Length: 0
Nov 30 11:44:49.290: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 103 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Contact: <sip:[email protected]:5060>
Content-Length: 0
Nov 30 11:44:49.294: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:49.294: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECB16F3
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 103 INVITE
Max-Forwards: 70
Timestamp: 1417347889
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:49.338: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECB16F3
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 103 INVITE
Timestamp: 1417347889
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Supported:
Accept: application/media_control+xml,application/sdp,application/xml
Contact: <sip:[email protected]:5060;transport=udp>
Content-Type: application/sdp
Content-Length: 306
v=0
o=BroadWorks 316169737 3 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:49.342: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 2
PM-HO-VG-01#00 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2749 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:49.350: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720b594cd517
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 103 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 213
v=0
o=CiscoSystemsCCM-SIP 9082578 3 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 10.18.81.10
t=0 0
m=audio 4000 RTP/AVP 18
a=X-cisco-media:umoh
a=rtpmap:18 G729/8000
a=ptime:20
a=fmtp:18 annexb=no
a=sendonly
Nov 30 11:44:49.354: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECC55
From: <sip:[email protected]>;tag=3C365010-1E42
To: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Max-Forwards: 70
Timestamp: 1417347889
CSeq: 101 BYE
Reason: Q.850;cause=86
P-RTP-Stat: PS=874,OS=17480,PR=872,OR=17440,PL=0,JI=0,LA=0,DU=17
Content-Length: 0
Nov 30 11:44:49.354: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECD1ECD
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Max-Forwards: 70
Timestamp: 1417347889
CSeq: 104 BYE
Reason: Q.850;cause=65
P-RTP-Stat: PS=872,OS=17440,PR=952,OR=19040,PL=0,JI=0,LA=0,DU=17
Content-Length: 0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 Race Condition
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECD1ECD
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
Timestamp: 1417347889
CSeq: 104 BYE
Content-Length: 0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 10.111.111.254
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 65
Disconnect Cause (SIP) : 200
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECC55
From: <sip:[email protected]>;tag=3C365010-1E42
To: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 101 BYE
Content-Length: 0
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 0.0.0.0
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 86
Disconnect Cause (SIP) : 200
PM-HO-VG-01#

Hi Manish,
Again, excellent feedback. Much appreciated.
I will try the commands suggested above and see if I can get DTMF to work correctly while interworking H.323 and SIP.
But my ultimate goal is to have SIP all way from the CUCM to the CUBE and from the CUBE to the ITSP.
If I enable SIP Early Offer with MTP on the CUCM going to the CUBE, all SIP Invite sent from the CUCM to the CUBE uses G.729r8 as the codec and once the call is established using G.729r8 should the ITSP reply with that codec, the call succeed and I am able to see an active MTP session using G.729 when I issue the command # show sccp connections.
One thing that I saw is that my ITSP love so much sending G.729br8 most of the times, so even if using SIP EO with MTP on the SIP Trunk to the CUBE, when I sent my INVITE out from the CUCM to the CUBE using G.729r8, specially on call center numbers such as 0800 numbers, you will see that the call established but the codec being negotiated is G.729br8 which is voice only (missing DTMF).
I will be doing some intensive test again later on this week and will send the logs.
Here is my question to both of you:
Which is the best way of having a proper SIP to SIP setup all the way that will not pose any problem?
Do I have to enable Early Offer on the SIP Profile used by the CUBE SIP Trunk or should I use the normal Standard SIP Profile? Do I need to enable MTP on my CUBE SIP Trunk or not?
From the CUBE point of view, I have a voice class codec that support G.729r8 or G.729br8 and the DTMF Relay method supported by the ITSP is RFC 2833.
I will send more logs for each scenario. I think that we are getting close to the resolution of this problem.
Thanks again for your support fellows.

SIP- h323 in a AS5850 - Not able to send h323 calls coming from a SIP Phone

Dear All!
I have an AS5850 configured as a SIP Gateway and as a H323 Gateway. I'm planning to use this equipment as an interconnection point between PSTN,SIP and H323.
I already have a functional H323 Network with ISDN trunks to the pstn and it is working fine. I added SIP configuration to the AS5850 in order to be able to route calls out to the PSTN or H323 remote ends coming from a SIP Phone registered with a third-party SIP Proxy.
When the calls coming from the SIP Phone goes to a PSTN destination the calls completes properly, but i am having problems trying to send calls coming from the SIP phone to a remote h323 gateway(also cisco)
Attached is my configuration and the error i'm getting in my cdr. It seems that the "ext" number of the phone is being used as destination string in the last call leg, but i'm not sure.
Please Help!
dial-peer voice 100 pots
application session
destination-pattern 5T
port 2/6:D
forward-digits all
dial-peer voice 102 pots
application session
destination-pattern 044T
port 2/6:D
forward-digits all
dial-peer voice 103 voip
application session
incoming called-number 001T
destination-pattern 001T
session protocol sipv2
session target ipv4:20X.21X.17X.1X
tech-prefix 10511
sip-ua
sip-server ipv4:20X.6X.14X.18X
CDR ERROR:
.Mar 24 2004 18:31:42.620 GMT: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 2, ConnectionId 9F74CE17 7D2A11D8 82A09B41 D2C3D418, SetupTime .18:31:42.470 GMT Wed Mar 24 2004, ***PeerAddress 2006***, PeerSubAddress , DisconnectCause 3 , DisconnectText no route to destination (3), ConnectTime .18:31:42.620 GMT Wed Mar 24 2004, DisconnectTime .18:31:42.620 GMT Wed Mar 24 2004, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
Thanks.
Attached you can find the debug ccsip messages output.

There are 2 solutions here.
1. Use of SIP/H.323 Signalling Gateway as the protocol convertor. Search google will yield heaps of hits on this subject. Product available both commercial and open source, trial, etc. Using this method means that the SIP End Point will communicate with H.323 End Point without going out the PSTN. I believe this is what you want to achieve in the long term. You are trying the AS5xxx as the protocol convertor for you, which it will not work. A call flow will be something like SIP IP Phone->SIP Server->SIP-to-H.323 Gateway->H.323 Gatekeeper->H.323 End Point. Of couse there is a SIP server that do the protocol convertor in the same box but the functionality is the still the same. Performance and concurrent call setup differ from products to products. Going for this solution would require you to find such products and test it on the your network.
2. If you do not wish to try on Soluton 1, this solution is a workaround way by not getting device but using the existing equipment that you have right now. Onto whether this good long term solution for depends on what you want to achieve both in term of commercially and technically. A call flow will be SIP End Point->SIP Server->Voice Gateway (AS5xxx)->PSTN Switch(ISDN/PRI)->Voice Gateway->H.323 Gatekeeper>H.323 End Point. The key is the Voice session must traverse the ISDN link. In other words your dial pattern must be setup is such as way that will go out thru the dial peer pots to pstn switch then come back to another dial-peer pots. I am not saying this is the most efficient way of doing it, I merely suggesting a workable way to achieve your desired goal without soluton 1.
Hopes you get better understanding now.
Thanks
SSng

TS3510 I have 3 different apple devices using the same Apple ID and would like to use FaceTime to call from one device to the other. Do I need a different Apple ID for one of the devices in order to do that?

I have 3 different apple devices (iPod Touch, iPad and MacBook Pro) using the same Apple ID and would like to use FaceTime to call from one device to the other. Do I need a different Apple ID for one of the devices in order to do that?

I found this on a related question in the Community:
Yes you can do it. I do it with 4 different devices all using the same Apple ID.
You need to associate different email addresses for each device in order to use those email addresses as the "contact at" email address. The reason the calls are dropping on you now is that what you are trying to do is like calling yourself on your own phone.
You can also create new iCloud accounts on each device simply to use for FaceTime, but I'm guessing that the users of the other two devices have their own email addresses which will make this work for you quite easily.
Take a look at this for more information.
The seems to go against what Gail said and the issue you raised about buying dup apps was my first concern. If this other post is correct, how to I set a different "contact at" in the iPod Touch?
Goose

Calls forwarded from sip device

Similar Messages

Maybe you are looking for