CallsAnsweredToHalf shows more calls than CallsHandledToHalf + ReserveCallsToHalf columns

We're running UCCE 8.5 with CVP 8.0 and UCM 7.5
When I look at the Agent_Skill_Group_Half_Hour table I see that the
CallsAnsweredToHalf column equals the sum of the CallsHandledToHalf and the ReserveCallsToHalf columns but only 95% of the time.
What I mean is that out of the 300+ agents we have for 10 of them it doesn't match.  The CallsAnsweredToHalf column shows 1 more call than in the
CallsHandledToHalf and ReserveCallsToHalf columns. 
I have looked and compared at the other columns to see if maybe there's a third column in the mix but it doesn't look like it.
Does anybody know why of this discrepancy?  a bug maybe?
thanks

Hi,
It wont be same always the CallsAnsweredToHalf and CallsHandledToHalf because with in half hour which are call is answered by the agent is updated in the CallsAnsweredToHalf column but only the calls that have been answered and have completed wrap-up by agents in the skill group during the half-hour interval will be updated in the CallsHandledToHalf column.
Regards,
Gnaneswaran.

Similar Messages

  • Why does my exported swf show more content than actually on frame?

    Why does my exported .swf show more content than actually on frame?
    My problem is relatively simple, though, I had some trouble finding a solution to it:
    When I play my exported animation using flash player in Google Chrome, if the window is bigger than the resolution flash document/frame, it shows content not meant to show up on the frame -- like parts of a huge background that aren't supposed to show up yet.
    In other words, how do I constraint the .swf to the white background/document resolution?

    Anyone? I'd appreciate it if someone replied soon -- I am done with my project once this issue is resolved, and I am excited to publish it.
    Please respond if you have any useful knowledge on the matter!
    Thanks!

  • HT201210 My Music library is showing more songs than I actually have? How do I fix this?

    My actual music library on my phone is showing 100+ more songs than I actually have. But on my computer it's showing a completely different (less) number? Should I restore?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • Reports showing more visits than Google Analytics

    Question:
    I have been receiving significantly high reports on numerous blogs posted across two different sites. When I compare the BC report to Google Analytics it's a massive different in numbers/page views.
    Page views on web pages seems normal. But the blog reporting is significantly higher than what we suspect.
    Answer:
    A couple of things:
    1, Always expect a 10% difference between BC reporting and a JavaScript based solution such as Google Analytics, as roughly 10% of web users browse with JavaScript disabled.
    With this disabled, Google Analytics has a very limited ability for tracking unique user visits, as it can't place a cookie on their system or send data back to the Google servers.
    As BC's tracking is all done server side (ie. not some code snippet you're pasting in), it should be able to more accurately measure these statistics.
    2. Some web crawlers may not bypass BCs filtering and hence be recorded as hits.
    For instance, with your blog you may have more heavily distributed links throughout the web via social media. A whole range of crawlers, archivers and indexers then visit those links to absorb the information and further spread it.
    Most of these automated browsers have JavaScript disabled, so again, your Google Analytics simply won't pick their traffic up.
    BC will record their traffic however, and they actively try to filter these out - but I'm sure some inevitably fall through the cracks  and get marked as legitimate traffic.

    Hi,
    Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
    Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
    Just a thought..................
    Regards
    Andre

  • Control array's scrollbar shows more rows than dimensions

    When an array's dimension and Number of Rows property are set to the same value, its vertical scrollbar is shown and implies there is one more row available in the array than the actual array size.
    This happen only if the array is a control, not when it is an indicator.  As an indicator, no scrollbar is shown at run time.  In edit mode, a scrollbar is shown when as an indicator.
    Is there a way to not have the scollbar appear if the number of rows equals the array size yet have it appear when the number of rows is less than the array size ?
    Example vi attached.
    Attachments:
    Array scroll bar dimension.vi ‏18 KB

    Jennifer,
    In practice, the number of displayed array rows is restricted so that only enough rows are shown to remain within the bounds of the front panel.  Otherwise as the array size is increased, the array will extend off the bottom of the screen.  My modified version shows this restriction.  But notice that as a control, the array shows one more dimension than it had been allocated to (and is shown as a disabled row).   In fact, clicking on the bottom arrow of the scollbar will continue to add more rows to the array control.
    Steve
    Attachments:
    Array scroll bar dimension.vi ‏22 KB

  • IPad mail icon shows more emails than there actually is?

    My iPad shows more unread emails than there actually is - How do I fix this?

    I figured it out! Clicked on EDIT then clicked on "mark as unread," on the bottom of the page; then clicked "mark as read," and it was fixed.

  • BW Query showing more Material than R/3 Query, Why..??

    Hi All,
    I am facing problem when running the query on Inventory cube 0IC_C03.
    I have loaded data from 3 Data Sources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM as mentioned in below link and strictly followed by applying Marker updates after the load
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Now the problem is,
    End User trying to compare BW Inventory Query (Plant Analysis: Stock) values with MC.1 (Plant Analysis: Stock: Selection)
    In R/3 (MC.1) showing the total number of materials are 3755 for the period 01.2008
    In BW Query for the same period (01.2008) total number of materials are 3960
    I am doubting why BW showing more materials?, this resulting the differance value for Valueated Stock value and Valuated Stock Quantity when we compare with R/3.
    When i am comparing material wise in BW query with MC.1, whatever the missing Materials are showing in BW Query as 0 Quantity but some value
    Ex:    Values is =  -£ 51.46 and Quantity is = 0 EA
    Please provide me some inputs, your help will be appreciated.
    Regards,
    Rajesh

    Hi Rajesh,
    Please check the Material numbers which are coming extra in BW not in R/3 whether they are under any material group. If they are all in under the "#" material group then u can restrict the query by filtering the material group "#".
    Just filter Excluding the "#" material group in the query.
    Then you will get the right values.
    Hope this may help you.
    The difference between the BW and R/3 material numbers is because. Some extra materials may get from the UM datasource, so you are getting only values and not the quantities.
    Try the above idea. I hope it works.
    With Regards,
    Ravi Kanth.

  • If Apple incorrectly showed more bars than it should have... wouldn't most

    phone makers do the same, to make their phone look better?
    I lost two bar after upgrading, but I do seem to have similar service. No dropped calls.

    I wouldnt say that they are throwing at&t under the bus.. It will just keep at&t honest about where the weak spots are. I would say that they are showing a "truer" signal than was previously shown. Granted my personal opinion like in my previous post.. my best dBm level i've ever seen on my BlackBerry was -70dBm which was full 5 bars. but according to apples new software that 70dBm is within the "5 bar" limit. altho its much closer to the 4 bar section. So realistically should the blackberry have shown 4 instead of 5? Im curious to see if any former blackberry users like myself are able to mention if they have ever had lower than a -70dBm reading on their berry and how their new signal on the iPhone 4 matches up. I usually display the same level signal (with 4.0.1) as i did with my bold 9000. There are some locations that i will show 3 bars where it used to be 5 - but its a very reliable 3 (even had data rates in the 4000kbps down/2400kbps up) in the 3 bar range. So i'm very pleased.

  • Usage showing more memory than is accounted for

    how do i get rid of 'other' storage bloating?

    Other is email, text messages, and the stuff that apps use in the background, like when you save your place in a game.  You can try deleting old email and text messages.  Specifically if people send you pictures in text messages and as attachments. 
    Other than that, yes you need to restore your phone as new and do not restore from a backup, the backup will put the "Other" stuff right back on your phone.

  • Photo library shows more photos than it really has

    My photo library has 41 photos, however when checking "Usage" it shows I have 10.4Gb. Why?
    The complete Photo & Camera shows:
    1. Photo Library = 10.4 Gb
    2. My Photo Stream = 20.1 Mb
    3. Shared Photo Stream = 821 Mb
    when checking via iTunes, it shows I have 3801 photos, where are they? I know they are not the in recently deleted album.
    Any ideas?

    Hi rfirmeza,
    It may help to force close all open apps and restart your iPhone.
    Force an app to close in iOS
    http://support.apple.com/en-us/HT5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/en-us/HT1430
    If you're still seeing a discrepancy in the number of photos on your device and storage space used, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    https://support.apple.com/en-us/HT201412
    Cheers,
    Allen

  • Why does my iTunes show more photos than I really do on my device?

    I only have 493 photos on my device but my iTunes shows that I have 644 and a lot of memory is used because of that? Any reason why this happens and how I might be able to delete the extra photos?

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • My iPhone showing more pics than are really on the phone

    I only have about 300 pics on my phone, but the storage shows 4GB used on the phone, and when i view via iTunes, it shows i have over 1300?  I have deleted all the photos in the "deleted" folder, as well as iMessages.  I have restarted my phone, hard reset, just about everything I know to do, and it still is the same.  I have seen the same issue other places, but no real solutions.

    Before you unplug the phone you have to sync it with iTunes.

  • SSD show more elements than HD

    Hi,
    I installed an internal SSD. Then I copied folder from an external HD to my SSD.
    I use this terminal command : sudo rsync -va --progress '/Volumes/d2 Quadra/Unity Démos/' '/Users/myMac/Documents/Unity Démos'
    "Info" show different data about my folder :
    SSD : 3 262 662 357 octets (3,3 Go on disk) for 27 361 elements
    HD : 2 980 330 379 octets (3,01 Go on disk) for 23 610 elements
    If I launch the shell command again it say
    building file list ...
    23801 files to consider
    sent 638339 bytes  received 20 bytes  1276718.00 bytes/sec
    total size is 2972259141  speedup is 4656.09
    Is this normal ?
    Is there a way to list the difference inside Terminal ?
    Thanks.

    Deleting and copying again via finder is Ok ...

  • Is there a way of showing more info than just the title and author for books in my iPad "library", say date downloaded, or date last read, eg ?

    Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly. 
    I may be missing something simple, so can anyone please help?
    Thanks in advance.

    Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly. 
    I may be missing something simple, so can anyone please help?
    Thanks in advance.

  • Why is verizon showing more data than I use?

    So i am on a family plan where there is two smartphones each line is billed separate for 2gb each for a total of 4 gb.  According to verizon I have been going over my data.  Yet I watch it carefully with my built-in app and the verizon approved app, I have text alerts that notifies me of overages and the closest I have came to going over is 90%, and we have never had an overage on our bill. This is not coming from one rep either I have spoke to multiple different reps and each have said we are using between 6-7gb which is not true.  I am positive there is a glitch in your software just trying to get them to understand that is the problem?  Has anyone else experienced this problem?

    Neil Goldstein2 wrote:
    Do I have to also delete the apps on the mac I'm syncing to before initiating wireless sync?
    No.  You must configure the sync characteristics.

Maybe you are looking for