CAM - Central Address Management

Hi All,
IR8A SG tax report is reading the employers address from CAM, i.e. Cental address management.
Can anyone share where are the nodes for CAM present in IMG...
On searching for CAM i get certain nodes under Business area but not sure are they the correct one??
Thanks & Regards,
Swat

Hi All,
IR8A SG tax report is reading the employers address from CAM, i.e. Cental address management.
Can anyone share where are the nodes for CAM present in IMG...
On searching for CAM i get certain nodes under Business Partner but not sure are they the correct one??
Thanks & Regards,
Swat

Similar Messages

  • PRAA in combination with central address management

    Hello,
    In our system we have central adress management activated. All the
    personell nrs are entered with the correct address (sreetname and
    housenumber in 2 separate fields). We use this information to create
    the corresponding vendor numbers in FI (transaction PRAA).
    However, with transaction PRAA both the address (streetname and
    housenumber) are copied into one field (streetname). As a consequence,
    the corresponding batch input session, which is using program SAPMF02K,
    cannot automatically (in bcakground) create all the vendors, since we
    always get a message about central address management. (Streetname does
    not exist, because it wrongly contains both the streetname as well as
    the housnumber.)
    The field USE_ZAV which is automatically ENTERED in the background
    processing of the SAPMF02K batch job, is causing this address check.
    We think this is a bug.
    Ideally the PRAA should be entering the streetname and housnumber in 2
    separate fields in FI-vendor master data, of the automatic check of
    field USE_ZAV should not be entered in this batch input background
    processing.
    Can you please give us some advice on how to deal with this situation?
    Kind regards
    Karinne Van Goethem
    SAP Consultant - Holland Casino

    XXX

  • CRM - IS-M Central Address Management

    Hi Guys,
    Can we integrate CRM (7.0) with IS-M Central Address Management.
    In IS-M trx. BP when creating a Business Partner address system validates against Central Address if this address exists and fill, for instance Postal Code.
    CRM can download standard ERP Regional Structure (Address Management), but I'm not sure if and what type of integration we can have with Media Central Address Management.
    Any inputs are welcomed.
    Best regards,
    Renato Petrulis

    Close since no answer for so long.

  • Tcode for Central Address Managment

    Hi
    I've an issue with sending emails to external systems and i beleive i need to set the email address of the sender in central address management. Anyone is asare of how to maintain  this email via transaction code only and not by coding !!!
    i assume that this is done using SU01. is this correct? kindly guide
    thkx
    Prabhu

    Hi,
    Check this,
    hope it helps,
    Re: RFBIDE00 - Address data issue not populated
    Re: T-Code(RZ20)
    regards,
    Pritha.
    Message was edited by:
            Pritha Agrawal

  • Update to Fax Number Required in Central Address Management

    We are on 4.6C, also using SRM.  A fax number is incorrect for a specific address in CAM, and needs to be updated.  How do I make this change in CAM?

    resolved

  • Function Module in Central Address Management

    Hi,
            Is there any function module which updates a filed in ADRC based on the customer number( KNA1) and again i need to update Email information in ADC6.
           Actually i am creating a sales order and need to update Customer master.

    resolved

  • Anyone know about centarl address management.

    hi expert,
       nyone know about centarl address management. how to use it in xdo1

    Hi
    Central address Managements stores the data in ADRC and other ADR* tables
    These tables contains the entire address details of the Customers.
    KNA1 may contain only few but these ADR* like ADRC contains all.
    So when you create Customer usinf XD01, if you create address centrally these tables are filled.
    Reward points if useful
    Regards
    Anji

  • Creating Vendors (RPRAPA00) and Central Adress Management

    Hi Experts,
    Is there a step by step explanation on how to create Vendors out of employees in SAP HR? I try to use RPRAPA00, but because Central Adress Management is active, I get an error in the Batch Input on the adress. Street and house number are two seperate fields on the CAM screen, the Batch Input program concatenated the two fields into one.
    Hope you can help!
    Marco

    Solved by creating a Z-version of the program

  • RPRAPR00 and Central Adress Management

    Hi Experts,
    Is there a step by step explanation on how to create Vendors out of employees in SAP HR? I try to use RPRAPA00, but because Central Adress Management is active, I get an error in the Batch Input on the adress. Street and house number are two seperate fields on the CAM screen, the Batch Input program concatenated the two fields into one.
    Hope you can help!
    Marco

    solved

  • Central Contract Management in case of Classic Scenario

    Hi,
    At our current implementation, requirement is to implement both Service procurement(with hierarchy) and Central Conract Management. I was exploring the possibility of utilizing Central Contract Management with Classic scenario.
    Will the Central Contracts created in this fashion be available in Sourcing Cockpit for the buyer to select against Purchase Requisitions? Will the Central Contract be visible at all in SRM in this case ?
    Please respond only with reference to Classic scenario.
    Thanks,
    Abhilash

    Yes the Central Contract will be available in the Sourcing Cockpit, both local and classic scenario's. Yes the Central Contracts will be available for the creation of Purchase Requisitions in R/3 and to assign SOS in R/3.
    Do know that for SRM 7.0 PI is required for setting up Central Contracts. This is promised to change with the release of EHP1 for SRM (due june 2010).
    Kind regards,
    Tim

  • Error-IM258-This refers to an error in central status management.

    Dear All
    We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
    System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
    But while executing IP10 system throws an error message as follows
    Error Msg no: IM 258- Object does not exist (Status Management)
    This refers to an error in central status management.
    Kindly help on the above issue
    Regards
    Thyagarajan
    Edited by: thyagarajan krishnamurthy on Feb 18, 2011 11:10 AM
    Edited by: thyagarajan krishnamurthy on Feb 18, 2011 2:28 PM

    Dear,
    Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
    Regards,
    R.Brahmankar

  • Using central Solution Manager for monitoring multiple customers

    Hello,
    We are working on monitoring SAP systems of several customers. For every customer we have configured central monitoring on Solution Manager system of that customer. All satellite systems are added to RZ21 and CCMS agents are configured correctly. On the Solution Manager, in RZ20 we have created a rule based monitor specific to the needs of customer, and that monitor is used for the whole landscape of every customer.
    But now I need to configure our central Solution Manager system which will collect CCMS data from all satellite systems of all customers on one place in RZ20. That central Solution Manager system should have direct connection only to customer Solution Manager systems and not to their satellite systems. Is this possible? If yes, can you please explain me how to do it or point me to documentation? I was unable to find solution.
    To make this more clear I made a picture of desired configuration:
    https://picasaweb.google.com/108686894540363563900/SAP#slideshow/5571983242527848482
    Edited by: Dejan Terzic on Feb 10, 2011 10:04 AM

    Hi Dejan,
    as far as I know this is not possible.
    we had similar issues, every time we migrated a new customer to or datacenter. Our solution was, to register the CCMS agents to two systems for a period of migration.
    Sometime ago, I found a question for that an SDN:
    Using another CEN for Solution Manager
    I know, that this is not your question exactly, but it is the right direction...
    Kind regards

  • I can't found ActiveX for Camera DVR Remote Management Sýtem

    Dear Firefox
    Tôi xài FF 8.0.1 tôi vào đầu ghi Camera DVR Remote Management System nhưng thông báo no plugin, ở trang web này có down ActiveX Setup. nhưng chạy xong vẫn không vào được
    Làm ơn hỗ trợ

    ActiveX only works in IE and not in Firefox. that mean Firefox can see Camera on the Internet ?

  • Multi-Site WAN With Centralized Call Manager

    The customer has HQ with 15 Branches. Head quarter has about 4300 Phones, and Branches has:
    Branch 1 = 420
    Branch 2 = 256
    Branch 3 = 385
    Brnach 4 = 298
    Branch 5 = 262
    Branch 6 = 171
    Branch 7 = 200
    Branch 8 = 97
    Branch 9 = 198
    Branch 10 = 254
    Branch 11 = 269
    Branch 12 = 224
    Branch 13 = 90
    I would still like to propose Centralized Call Manager Cluster with SRST, but little confused since the number of phones per branch is very high.
    What would be best deployment model for this type of scenerio along with VoiceMail and CER.

    Of course you can use CME/CUE, but the problem is that you need 3845 for SRST with CME/CUE, which cost a lot of money CISCO3845-CCME/K9 is $16495 plus CUE ($3000, not include voice mail subscriber box).
    So I will agree what people suggest here.
    I have centralized design (Publisher, subscriber) at Main Location, and another subscriber at remote site coz 500 users. I chose put subscriber there rather than use 3845 with SRST.
    They share voice box at Main site (Unified).
    The rest of remote site use SRST for backup.
    Large remote site with T1 PRI with SRST if WAN down.
    Small remote site with vic2-2fxo/4fxo with SRST if WAN down.
    You can read the SRND here:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806e8a79.html
    Also, you can design multiple cluster depends the location of main and branches. For example, half office located at West Coast, another half at East Coast. If I were you, I will create two clusters.
    Again, it depends a lot of things, for example bandwidth, round-trip delay etc...
    Hopefully, thats can help you.
    Ken

  • IPv6 Address Management and Security Questions

    I'm trying to draft an IPv6-based version of our location's current routing configuration in anticipation of when our ISP will finally roll it out, and address management has been giving me the biggest headache - ironic, considering IPv6 was supposed to simplify address allocation.
    My first config draft was made assuming that I would be getting a static /56 or /60 prefix from the ISP, and I was just going to insert the prefix into my DHCP pools and there would be no issues. That was before reading around and discovering that some ISPs are considering prefix delegation (PD) for both residential and business accounts instead of static blocks. Now I have questions about how to stick as close to the current IPv4 configuration as possible.
    For the PD scenario, what I am looking at now are two addresses ranges for each network - a ULA /120 space that I want to control using stateful DHCPv6, and the global space which can be /64 and auto-configured. That way there will be a "private" address space for internal routing in the event of a prefix change or an extended outage. But I'm not sure how the config should look for such a scenario. What I have drafted so far is this:
    ipv6 dhcp pool DHCP6_INTERNAL
     address prefix FDAB::1:0/120
     domain-name whatever.net
     dns-server FDAB::1:1
    ipv6 dhcp pool DHCP6_DMZ-WIFI
     address prefix FDAB::2:0/120
     domain-name guest.whatever.net
     dns-server FDAB::2:1
    interface GigabitEthernet0
     description WAN-LINK
     ipv6 enable
     ipv6 address dhcp
     no ipv6 unreachables
     no ipv6 redirects
     ipv6 flow ingress
     ipv6 flow egress
     ipv6 virtual-reassembly in
     ipv6 nd autoconfig default-route
     ipv6 dhcp client pd hint ::/56
     ipv6 dhcp client pd ISP-PREFIX
     zone-member security OUTSIDE
     speed auto
     duplex auto
     no cdp enable
    interface FastEthernet8.1
     description VLAN_1-INTERNAL
     encapsulation dot1Q 1 native
     ipv6 enable
     ipv6 address FDAB::1:1/120
     ipv6 address ISP-PREFIX ::1:0:0:0:1/64
     ipv6 flow ingress
     ipv6 flow egress
     ipv6 virtual-reassembly in
     zone-member security INSIDE
     ip tcp adjust-mss 1300
     ipv6 dhcp server DHCP6_INTERNAL
     ipv6 nd managed-config-flag
     ipv6 nd other-config-flag
    interface FastEthernet8.2
     description VLAN_2-DMZ-WIFI
     encapsulation dot1Q 2
     ipv6 enable
     ipv6 address FDAB::2:1/120
     ipv6 address ISP-PREFIX ::2:0:0:0:1/64
     ipv6 flow ingress
     ipv6 flow egress
     ipv6 virtual-reassembly in
     zone-member security DMZ
     ip tcp adjust-mss 1300
     ipv6 dhcp server DHCP6_DMZ-WIFI
     ipv6 nd managed-config-flag
     ipv6 nd other-config-flag
    Will this config work? By which I mean: will the DHCPv6 servers provide ULA addresses, and will SLAAC work for global address allocation? If not, what needs to be changed?
    Also, another question. I found a few references to a prefix name (the "ISP-PREFIX") which can be used as part of a static IPv6 address on an interface, which is a good idea in case the prefix changes. But that brings up another concern - if the prefix changes, that will invalidate ACLs referencing the global addresses using the previous prefix. Is there anything similar to the prefix name string that can be used in ACLs to keep this from occurring?

    DHCPv6-PD is not necessarily dynamic the same way as DHCP was with the public IPv4 addresses in the IPv4 world.
    While the outside network (PPPoE, DHCPv6, anything) might be truly dynamic and changing with possibly every login session, the DHCPv6 delegated prefix might be tied to your login credentials or DHCPv6 client's DUID after the first connection. A bit like a DHCP lease reservation.
    If that is the case, there is some possibility that your ISP will run reverse route injection, and will always route your "fixed" prefix  to the currently active dynamic "outside" address.
    Talk to your ISP and have them confirm that, once the PD'd /48 or /56 is initially assigned, it won't change, and that the same prefix will be delegated every time. Then you can treat it as if it were fully static, and you won't have to go down the ULA path.
    I contacted one of our local ISPs, and they're doing it exactly that way: PPPoE for IPv4 and IPv6 (fully dynamic), and DHCPv6-PD with the /48 tied to the PPPoE login credentials. I might change to that ISP sooner or later.
    With my current ISP, my IPv6 access is 6RD based. I get a /60, with my current public ipv4 address (by DHCP) embedded into those 60 bits. Readressing is bound to happen sooner or later, and it happens every so often, and it breaks my IPv6 ACLs.
    I'm also looking for a way to write IPv6 ACLs with wildcard bits, not prefix/mask, so I can use them with ZBFW. So far, no sign of it.
    A few more comments:
    ULA addressing: 
    It may look tempting, plausible and intuitive to use dual global and ULA addressing. 
    I started this way as well. However, it turns out that Windows 7 has (had?) some issues with proper source address selection. The "longest common prefix" rule never seemed to work properly. In some cases, it would pick the global address to talk to ULA hosts, or stubbornly insist to use the ULA address to talk to an IPv6 internet host. It was a frustrating experience. Be sure to test this to the full extent (and back, and again and then some more) with every operating system you intend to use.
    Using /120:
    Be sure to test this as well, and very thoroughly. Subnet masks longer than /64 are sometimes called "uncharted territory" in IPv6. Longer subnet masks will break SLAAC, and there may be (embedded) devices that will not react benevolently to a subnet mask other than /64, or simply lack support for DHCPv6.
    adjust-mss
    I see you have "ip tcp adjust-mss 1300". While PMTUd may be mandatory with IPv6, I found it being broken already :-( . "ipv6 tcp adjust-mss .... " is now a separate command since IOS 15.4(1). I would suggest considering it, depending with your experience with PMTUd on IPv6.

Maybe you are looking for

  • How can I get to the desktop?

    Can't get to the desktop. When I press the Start button, or the combo Command-Ctrl-Start I get the musical cord but no desktop. I always shut it down with the Shut Down command from the Apple menu. Could this be another motherboard problem? The mothe

  • Scheduling a job in SAP R/3 !

    Dear All For one of the requirements we need to increase the DELTA job frequency on the R/3 side. We will schedule a job for this with the report 'RMBWV317' in the background. We are fetching data from the three different clients on the same R/3 syst

  • Is this jsp or oracle issue

    Hi , I have published a view as jsp link(using a in-house applcation) but i got the following error : An error occurred while fetching the results. Error Message : ORA-29925: cannot execute acctA.STRINGAGGTYPE.ODCIAGGREGATEINITIALIZE note : i am usin

  • Regarding error messages &submit

    Hi have a customised transaction zc10 which is a report with the selection screen. if we enter the fields and execute it will update co01 record by record manualy. previously this is executed record by record and it displays error messages.but now i

  • DataSocket Failures followed by Inability to parse URL

    I am having a recurring problem with Data Socket Where I get a "No traffic from server " error or "write failed" How can I repair this?