Cam I add more than two audio tracks in a clip in iMovie 11?

I want to add more than two audio tracks in a clip, is it possible. I'm using iMovie 11.

You, you can add several.
Good Tutorial Here

Similar Messages

More than two audio tracks?

Is it possible on iMovie to have more than two audio tracks? Is there a way I can add more? If so, how?
Thanks so much,
-Rachel

At the recommendation of Matthew Morgan and others in this forum, I took about twenty minutes and checked out garage band.
You can click on a movie tab, in which you can import your imovie project. Garage band gives you the option of, at least, 8 simultaneous tracks. You can record from your mic, mind you that's a bit tricky, you'll have to read the garage band manual, but like I said, it only took twenty minutes to configure everything.
Once everything's recorded, you can export to imovie. I didn't try that, but I know it absolutely can be done, and it shouldn't be hard. That will give you 9 tracks at a minimum, plus your video's sound as a 10th. Pretty cool stuff.
FYI, it's not enough to have your mic selected in sound preferences. You'll want to go to Utilities and audio/midi setup and choose your mic AND choose it again in the Properties For tab. Once that's done, go to Preferences in Garage Band, click on audio/midi and choose your mic. Now, you're good to go. (I found this out under an "imic" microphone question in garage band help.) Awesome app.
Hope this helps.

Adding More Than 16 aUdio Tracks.

How do I add more than 16 Audio Tracks when my computer says there are no more audio tracks available?

" I set the max number of audio tracks to 35 and I am still notable to add more audio tracks."
Did you then re-launch the audio driver by deselecting it and then re-selecting it? It does not take effect until you do.

[Help !]Exporting more than 2 audio tracks impossible ?

Hi all,
I am trying to export a sequence with 6 audio tracks using *Menu->File->Export->Using Quicktime conversion...* and it seems to be impossible to export to more than 2 audio tracks !
If I use the option Export->Quicktime movie I can export my 6 audio tracks but I don't want to export to .mov file...
Can anyone confirm or has a solution ?
Thanks in advance.
Tom Douce

Nope, Red is correct on this Tom, unless I'm misunderstanding your question. Regardless of your audio hardware, to export more than 2 channels of audio you must define those extra channels by creating additional "audio outputs" for your sequence ... basically the number of audio channels in your export is equal to the number of audio outputs in your sequence settings; additionally you must map the audio tracks in your sequence to those audio outputs ... you do that by right clicking on or around the audio track lock icon / auto select icon for each channel and using the context menu to assign the track to a given output (you can also do this in the Audio Mixer toolbench window). This is the workflow regardless of whether you are exporting to a file or exporting to tape or otherwise.
For what its worth tho, in my own quick hardly conclusive tests earlier on, exporting a correctly configured multichannel sequence "Using Quicktime Conversion" always resulted in a stereo downmix being passed to the chosen export component, so I still think you're likely to end up needing to use the private export component API to get around this.
Hope I'm wrong tho, as it would surely make life a lot easier for you
Best
Andy

More than 8 Audio Tracks?

I can't seem to have more than 8 Audio Tracks. - I can create new ones, but they are 'greyed out' - I can't select or use them. How do I use more? Thanks.

Create more audio objects in the environment, or
use the setup assistant to create a default song with more audio tracks than you'll ever be likely to use, or
just say **** it and switch to Logic 8 or 9, which is actually designed to be used by people with more brains than time (sorry, old-timers, but if you didn't start out on Logic during simpler times and grow with its idiosyncrasies, Logic 7 really was a horrific mess, as this thread shows).
I hated every version of Logic prior to 8.

How do I add more than two numbers in a single cell

I am wanting to add more than two numbers/values in a single cell.

A1 = B1+C1+D1
OR
A1 = SUM(B1:D1)
this is exactly summing three cells but may be extended to any number of cells up to the limit of the Numbers application

Creating more than 16 Audio Tracks

I am working on a project that needs more than 16 Audio Tracks. Then I click on the track, then go to Audio Tracks, there is only 16 available, and they are all being used. I went into Preferences --> Audio --> Drivers, and boosted the Max. Number of Audio Tracks up, but there is still only 16, and my 16, I mean 16 different Channels. I know there has to be a way to do this. I have gotten more the 16 using Garage Band. Thanks in advance.

ChicleB76 wrote:
I am working on a project that needs more than 16 Audio Tracks. Then I click on the track, then go to Audio Tracks, there is only 16 available, and they are all being used. I went into Preferences --> Audio --> Drivers, and boosted the Max. Number of Audio Tracks up, but there is still only 16, and my 16, I mean 16 different Channels. I know there has to be a way to do this. I have gotten more the 16 using Garage Band. Thanks in advance.
You need to learn to use the Environment.
In the Environment there is an audio objects page, and there it is where you have to manually create the new 17+ audio tracks you need.
Now, go crack open the manual, and go to the Environment chapter... it will enlighten you.
Cheers

Cannot seem to add more then 4 audio tracks

Hi everyone, I'm a new logic user and I just can't seem to add more then four audio tracks. If I keep going "track>create with next instrument" I seem to only add buses. I've been searching for answers in Orren Merton's "Logic Pro 7 Power" but I still can't seem to find an answer. Hope someone can help me, thanks in advance.
Mac Pro Mac OS X (10.4.9)

Highlight one of the audio tracks, then in that same menu in the arrange window, select "Create Multiple..." then it will ask you how many you need....
If that doesn't do it, come back here for further instruction.
Welcome to the forum.
X

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Prores with more than 2 audio tracks

hello Adobe!
we can't export timeline to apple prores with more than 2 tracks.... however FCP7 many years ago was able to export 16 tracks in "no recompress mode".
how can modern premiere be locked to 2 audios tracks ???
as broadcaster and postproduction house we are required to deliver contents with 8 audio tracks MINIMUM!
fred

hi Benita!
thanks for this, i notice that's a popular question on forums.
we already use this audio remapping feature, but i've not noticed that's was the way to enable multiple audio in AME.
also, you can create a custom sequence preset (with any number of multichanel audio, channels output and panning) .
fred

CS3, exporting to tape has problems with more than two video tracks

Well, not quite, but that's the best I could do in the subject line.
I record multiple performances and edit scenes from among them. At times, this results in three or four video tracks on the timeline at once. Each track is 100% opaque, so only the top Enabled track shows. By Enabling or Disabling the various tracks, I can get the sequence I want.
And the sequence plays back fine in the Monitor window. But when I try to Export it to tape, as soon as I get to such a place, the image hiccups around the same small number of frames (think of the video equivalent of an audio sample).
It's not the number of video tracks. I can add Image Mattes on a third video track operating on the two below. I can add any number of titles on different tracks. They need to render, but then they export to tape perfectly.
What's different about three or more .avi tracks, even when they are Disabled?

Thanks, Jim, for your reply to this and other threads. (Warning: I had two other questions — been saving them up for awhile — that I'll post shortly. It was too late already last night).
> AVIs need to be "read" from the hard drive and can create a bottleneck depending on certain conditions.
Agreed, but unless there is partial opacity in the top Enabled track, only one track at a time is exported. And in the cases I cited, the unused clips were Disabled. No need for Premiere to read them at all. I assume the state of each clip is part of the Project.
Ah well, I was only curious if I was missing something obvious, or perhaps it was a known bug that would be addressed. Apparently the additional resources needed for tape export push Premiere over some edge. Remember, I can watch (even Preview) the sequence in the Monitor window without seeing this artifact.
> Render before exporting to tape is SOP. Go with that.
Naturally. And I do. And if I didn't, Premiere would do it for me automatically before opening the Export to Tape window.
Thanks again. On to the next thread.

How to add more than one music track in iphoto slideshow

how do i add a second music track to a slideshow in iphoto. When I have a slide show longer than one song I'd like to start a second music track rather than repeat the song. Thanks for any help...

I shortened songs in the playlist by changing the end time but when I select for slideshow in iphoto, it plays the full length????
I know that feature works with later versions of iPhoto but don't remember it it did with iPhoto 8 and 10.5.8.

Prime Infrastructure 2.1.1 cannot add more than two interfaces in Dynamic Interface Controller Templates

Cisco Prime Infrastructure is a damned nightmare of browser bugs (some features work in IE8, some in IE9, and some only in Firefox). And I am not sure if what I am experiencing is a browser bug - or a real bug - or something that I was able to do before and can't any more? I would love for someone to either explain why this is happening to me, or reproduce the bug!
I'm running Prime 2.1.1. I am doing this ...
Configure > Controller Template Launchpad
System > Dynamic Interface
Select a command > Add interface (GO)
Enter all the properties - roll to the bottom of the page, and click Apply to Controllers
I have four controllers. And normally I would add an interface for each controller. But I can only create two out of the four. It doesn't matter which two I choose. When I click Add under Manage Interfaces for the third controller, I cannot click the Done button to apply it (see screenshot, attached). I have found that if I change the VLAN to something else, it will let me save it. But ... why? I went back and reviewed all of my existing interface templates and I am not doing anything different. Although, they were all created a long while ago using WCS 7.x.
Any help, guidance, or confirmation of insanity would be appreciated.
-Steve Ballantyne

I doubt I will get any hits on this here but I always try. I opened a TAC case. I will come back and comment on whatever they find.

SharePoint 2013 shows the same picture library after add more than two picture library slideshow web part in one page.

The environment is SP2013 with SP1, I had check the KB, but don't have any hotfix about this.
I had try it on the different fram, also the same result.
I try it on sharepoint online is work. So I think that must have hotfix about this.
I find there is someone have the sam problem.
http://sharepoint.stackexchange.com/questions/70944/picture-library-slideshow-issue-with-multiple-libraries
Some snapshot about this :
Vinci Wang

Hi Vinci,
Thanks for posting your issue, This is a known issue in 2013. You could have multiple slideshow
webparts on a page in 2010, but it won't work in 2013. As of now there is no hot fixes for this issue. you can try code mentioned in below URL
https://social.technet.microsoft.com/Forums/sharepoint/en-US/5ca65f7f-770b-4b0f-8e40-d08578a6442b/sharepoint-2013-picture-library-slideshow-web-part-image-not-displaying-correct-size
Also, check out below mentioned URLs to know more about this issue and fixes
http://sharepoint.software.tech.answers.ninja/post/70944
https://social.msdn.microsoft.com/Forums/office/en-US/63b2ce8c-5f31-4a39-934e-6d759e9afa0c/picture-library-slideshow-web-part?forum=sharepointgeneralprevious
http://blog.vgrem.com/2013/04/27/beyond-the-slideshow-web-part-capabilities-in-sharepoint-2010/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Recording more than two seperate tracks into Garage, same time

Hi there,
What I want to do is run four inputs simultaneously into Garage onto four seperate tracks (no spillage). What is best? What should I do? I have an iMac (10.4.1).
I am aware that a Presonus Firebox might work but I am also aware that there might be a sound card that would also work.
Cheers,
Harry

Here's a set of interfaces:
http://www.bulletsandbones.com/GB/Interfaces.html

Cam I add more than two audio tracks in a clip in iMovie 11?

Similar Messages

Maybe you are looking for