Cam in a separate group above a baked layer moves baked layer also?
Hi Guys
In Motion 3 I have baked a group which contains lots of camera movement and moving objects.
I created a totally separate 3d group with its own camera contained within its group.
I placed the new group on the layer above the baked layer.
However, whenever I move the active camera for the new group, it causes the baked layer to also similarly move.
I want the baked layer to remain as it is, and instead be able to swoop my camera around text only in the new layer.
Any tips about how I might overcome this please?
Thanks in advance for any thoughts you might offer.
Warm regards
Peter
Make sure your baked layer is inside a 2D group. Then the camera will not affect the layer.
Andy
Similar Messages
-
I am trying to do a group left within or below a group above, like so.
Name John Doe
Incident Activity
12345 Apply
Accept
Modify
12346 Apply
Accept
Modify
Name Bill Smith
Incident Activity
12347 Apply
Accept
Modify
12348 Apply
Accept
Modify
I can't figure out how to specify different types of grouping for different groups.
Any suggestions?
nullMake a group above report for the first 2 groups. in the Data model extend the detail's repeating enclosing frame.
Inside this frame draw an additional default layout (a button in the Layout Editor on the left toolbar) and inside this one insert your detail group.
Or... you can create an above group without any break first, then separate a group in the Data Model and add a repeating frame around the detail columns. Specifi as source of this frame the name of the detail group from the Data Model. -
Hi,
I am facing problem in Group Above report this can be said in the schema of Scott as follows.
I have developed group above report on Dept,Emp tables. It is showing all the data but the deptno =40 is not showing. The query used is
select * from emp,dept
where dept.deptno=emp.deptno(+)
There I have also used formula column to calculate total salary for each department in front of each department. I case of dept no =40 it is also showing blankHi Riaz
The 'emp' table does not have employees in dept 40.
Regards
Sripathy -
How to create a Group Above report using APEX
I want to create a Group above report with more that one group using APEX. Is it possible to generate such a report using APEX. If so kindly let me know how to go about creating a Group above report with more than one group.
Hello Srini,
Thank you very much for the reply but I'm not into OBIEE... I want the required query to be processed and the output to be shown in xml layout to load into RTF document. The rest I can manage.. but please let me know how to get the .xml output with out using the report builder or the apps environment(concurrent prg submission)..
Please let me know if any... urgent
Thanks in advance
Krishna -
Break Column in Group Above Report - Causing Error in Data Groupings
Since I'm required to designate at least one Break Column in my Group Above report, I created a dummy column in my SELECT statement. I did this so that I could designate the required minimum of at least one break column, but I designated one that won't have any impact on how the report is ordered, because it will be the same value (NULL) for every record. So, my SELECT statement starts out looking something like this:
SELECT
NULL break_column,
column_1 column1_name,
column_2 column2_name,
column_3 column3_name,
column_4 column4_name,
column_5 column5_name
I needed for the break column to have no impact on the ordering of the report because I need for the ORDER BY clause to completely control how the report is sorted, w/o any interference by a hard-coded break column. I need this because my intention is to make the ORDER BY clause dynamic, and a hard-coded break column with actual data would supercede the ORDER BY clause, thereby making it static.
Everything is working correctly with regard to how the report is sorting the records designated as group columns; however, the detail columns are getting all messed up as far as what main record they're grouped under.
By this I mean that when I designate only one break column, some details may display under the wrong group, where they're not supposed to. For example, each page consists of demographic info. about a specific record on a table, and the details listed under it should be the individual comments that have been made on that record. The issue I'm seeing is that for some records, it's showing comments from not only the record for that group, but it continues to list out comments made for other requests as well, when those comments should be displayed under their own respective records.
Why is this happening when I designate only one break column, and how can I keep it from doing this?Did you get a solution for this?
I have the same problem.
Any help would be appreciated.
Thanks,
Madhu -
Display Total in Group Above Report
Hello,
I have a group above report with month, product_id, product_name as group above fields I have product_entry_date, description, total_qty, actual_qty etc as display fields in my report.
I would like to have a total and grand total for total_qty and actual_qty for product_id and product_name. Issue I am having is when I add a summary column for total_ qty and actual_qty, total is getting displayed for each month.
How can I display total and grand for total_qty and actual_qty?
Any help is highly appreciable.
Thanksponic wrote:
Hello,
I have a group above report with month, product_id, product_name as group above fields I have product_entry_date, description, total_qty, actual_qty etc as display fields in my report.
I would like to have a total and grand total for total_qty and actual_qty for product_id and product_name. Issue I am having is when I add a summary column for total_ qty and actual_qty, total is getting displayed for each month.
How can I display total and grand for total_qty and actual_qty?
Any help is highly appreciable.
ThanksIf you want to display total qty for each month and you already done it. as you says..
total is getting displayed for each month.If not ,
Take a summary column at month group >> at properties .. Summary Function : Sum , Reset at month group.
and for grand total
take a summary column outside the query. >> at properties .. Summary Function : Sum , Reset at report.
Hope it works.
hamid
If someone's response is helpful or correct, please mark it accordingly. -
How to design group above report manualy
I want to design group above report manually. How can i define main repeating frame and then internal repeating frame like report builder.
Hi,
one possibel way is:
//-- loop through all master values
<?for-each:DEPT_ROW?>
//-- store the master key in a variable
<?xdoxslt:set_variable($_XDOCTX,'v_DEPTNO',DEPTNO)?>
//-- Output of master data
<?DEPTNO?>
<?DNAME?>
//-- Loop through second dataset looking vor all data suitable to the current master key
<?for-each://EMP_ROW[xdoxslt:get_variable($_XDOCTX, 'v_DEPTNO')=DEPTNO]?>
<?ENAME?>
<?JOB?>
<?end for-each?>
<?end for-each?>
Hope that helps
Rainer -
Multi-query group above report creates more pages
Hi,
I have a multi-query group above report (paper only), the parent group creates 5 rows(subframes) all onto the same page, but then creates 4 more IDENTICAL pages!!?
at the end I have 5 repating frames and 5 pages.
If I set Maximum Records per Page to 1, I have 5 pages (IDENTICAL) with the first frame only...
any idea?
cheers
Matteohello,
you will have to create a counter, that tells you the numbers of students (summary-column, function : count, reset on : course) and create a format-trigger on the heading that hides it when the number of students is 0.
regards,
the oracle reports team --pw -
Multi level Group Above Report
I have a multi level Group Above report like this.
School name : xxxx
Course1
Student1
Student2
Course2
Student1
School name : yyyy
etc...
No students are enrolled in some of the courses. I used the Outer Query in SQL to include those courses. Everything looks okay, except the header for the students are still appearing. how do I supress the student heading if no drecords are present?
Can somebody help me.
Thank you
David Smithhello,
you will have to create a counter, that tells you the numbers of students (summary-column, function : count, reset on : course) and create a format-trigger on the heading that hides it when the number of students is 0.
regards,
the oracle reports team --pw -
hi,
To get clear idea i am using emp table as an example.
I am creating a report using style GroupAbove and save it in .jsp file.
I took empno as group .
My report was displayed in this way:
page 1:
empno 7369
ename job sal comm deptno
simth clerk 800 0 20
empno 7499
ename job sal comm deptno
allen sales 1600 30 30
ramu manager 4000 0 20
and so on...
page2 :
empno 7499
ename job sal comm deptno
raju clerk 500 0 10
empno 7599
ename job sal comm deptno
ramu worker 300 0 40
..... so on
But My result should be in this way :
page 1:
empno 7369
ename job sal comm deptno
simth clerk 800 0 20
empno 7499(problem :Here i dont want to display heading of ename.... and so on)
allen sales 1600 30 30
ramu manager 4000 0 20
page 2:(if next page starts then should start with heading of ename... and so on)
ename job sal comm deptno
raju clerk 500 0 10
empno 7599
ramu worker 300 0 40
..... so on
If any one know this probelm help me soon
it's very urgent
with regard's
vijayYou may have been better to use deptno as the group column in your example, since I'm not sure that grouping on empno makes sense (and hence makes the example difficult to picture).
That said, it seems that the problem is that you only want the details headings to be displayed once per page (for a group above report). This isn't going to be too easy, and will require some coding, but bear with me.
The first thing to do is to create a PL/SQL package with a single boolean variable in it. This will be used a flag to determine whether the headers should be displayed.
In the before report trigger, set this variable to TRUE.
In the format trigger for the frame containing all the boilerplate labels, check to see if the variable is TRUE. If it is then set it to FALSE, and return TRUE.
If it's not then return FALSE (to suppress the display).
In the between pages trigger set the variable to TRUE.
Hope this helps (and that I've understood the problem),
Danny -
Hi All,
I am using reports 6i.
I designed a master/detail report with style group above.
Its working fine. But I need every master record has to start from a new page.
But now First master record with its details ends at page no 8 and second master record starts at
page no 8 itself.
how to make the report output as new master record starts from a new page.
Help will be appreciated.
Regards
Sankar MNHello,
You can use the "Repeating Frame" property : Maximum Records Per Page
Set this property to 1 for the Master Repeating Frame
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_maximum_records_per_page.htm
Regards -
Group above report - help please
Good Morning,
I'm trying to create a group above report that resembles the following:
LETTER TYPE: 00001
BATCH TOTAL NOREPLY
1234 3 1
2345 2 0
TOTAL VOL. FOR LETTER 00001 5
I've tried using:
select ltrtype, batch, count(reply)
from ltr
where reply = 'N'
group by ltrtype, batch
which does give me the correct figures under the NOREPLY Heading, but I can't get the correct figures for the TOTAL heading (NOTE: The figures in the TOTAL column should be a total of both the reply = 'Y' and reply = 'N' for the ltrtype and batch - the figures in the NOREPLY column should be a total of only the reply = 'N' for the ltrtype and batch.) I hope this explanation is clear
I've also tried eliminating the where clause, but then I get the correct figures under the TOTAL heading, but I can't get the correct figures for the NOREPLY heading.
I've also tried using two queries and a data link, but I couldn't get that to work either.
Any help would be greatly appreciated.
Thanks.Go to report wizard and check the groups and fields tabs. Otherwise map the repeating frames accordingly.
-
Need urgent help on mailing lable report in group above style
Hi
I need to prepare a report on reports 6i in mailing lable style based on group above style (multiple levels) e.g. yellow page directory. can anybody help me.
rgdsHi,
That's something I also had to do.
Ad here's how this works.
Suppose you have:
Select ...
from ...
where ...
order by name;
Yet in your data model, in your group the fields appear, let's say, in the following order:
date
name
So, Reports will sort within the group first by date.
The answer is that your fields should appear in the data model in the order you wish to have them sorted. Thus, in the example, you should have:
name
date
Frankly, I don't really like the way it works. Yet, it's just that simple.
Hope this will help,
BD. -
Group above and left classic reports
how can i group above and left in an existing classic reports? is there any document around here please share it to me.
>
Please update your forum profile with a real handle instead of "user13653962".
how can i group above and left in an existing classic reports? What does "group above and left" mean? A demonstration layout on apex.oracle.com or here (using tags<tt>\...\</tt> tags to preserve formatting) would be helpful.
The options for break formatting on classic reports are:
<li>The basic built-in control break features.
<li>Simple DIY break layout on any number of columns using analytics in the source query: +{message:id=10679160}+
<li>Complex report layout with multi-level headings using analytics in the source query and a custom named column report template with conditional row templates: +{message:id=9816577}+
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand. -
Group Above - 1 Master & 2 Detail Queries
Hi Techies,
I have 2 queries(Q1 & Q2). Using Q1, I fetch the master records. Q2 fetches Detail records from a set of 3 tables. I created a group above report using wizard. It works fine.
Now I want to add 1 more query Q3 which is same as Q2 but the resulting records differ based on the type 'English' or 'Arabic'. I have hard coded the Type in the queries to fetch the respective records.
Master Query Key is datalinked to both the Detail queries Q2 and Q3 using PK. I have the display of records as DOWN in the wizard. The Arabic details are shrunk and displayed in a very small in font. Pls advise on how to go about this.
Thanks,
SriHi,
You could implement Master/Detail regions just by mapping a
field in the master dataset to the detail dataset. In your case,
you can create two dataset as shown below.
var master = new Spry.Data.XMLDataSet("path to xml",
"xpath");
let's say you have an "id" element in your master dataset.
and detail dataset depends on it, then you can pass it to the
detail dataset in the url as a request paramter (or any other
technique).
var detail = new Spry.Data.XMLDataSet("path to
xml?id={master::id}", "xpath");
So, whenever the current row changed in the master dataset,
the detail dataset makes a call to the server with the selected id
and the detail region gets updated automatically.
Maybe you are looking for
-
HELP!!! Here are the specs of my machine: 2011 13.3" MacBook Pro 4 GB Ram/320 GB HD For the past several months my MacBook Pro refuses to shut down or restart without holding down the power button. Whenever I choose to restart or shut down the comput
-
VERY strange behavior - HELP!
I don't know if anyone can help, but I have had some VERY strange Powerbook this afternoon while doing some Word processing. I was doing a quick search on the internet, when web pages would not load and applications became EXTREMELY SLOW. It was almo
-
after using task manager to close the firefox.32*exe process, then FF will restart properly. Doesn't seem to happen if the laptop is powered off.
-
I have very much liked using Preview as the standard viewer for PDF as well as various image formats, but evidently Acrobat 7 introduced elements that my version of Preview cannot handle any more - I get 'the file may be corrupt or a version that Pre
-
hi experts Can anybody explain me the STO process step by step from Mnaufacturing plant to DEPOT. How its being done in SAP. Explain me the full cycle, for eg, the sales order the created from DEPOT to Manufacturing plant ....then... what are the ste