Camcorder connected but will not import or show video

I have a Sony Digital 8 camcorder that used to work well with imovie. Although I have it connected and the blue screen states that the camcorder is connected, imovie will not import the video nor will it show it playing. When I rewind or fast-forward, it will show the counter but I will not get a picture. The play, fast forward and rewind buttons in imovie will operate the camcorder but no image or sound. The import button shows that it is being pressed but still no results. Aill I get is the blue screen with its message of camera connnected.
I have used different tapes, verified that the tapes have content, rechecked the connections and reset the permissions. Could use any and all advice.
Thanks
Rich
Mini Mac   Mac OS X (10.4.1)  

Hi Richard
In rare cases this can have happened.
A. Try Your Camera on another Mac. OK - Then skip the rest !
B. Control the 6-pin end of Your FW-cable and the connector on Your Mac so
that it is not broken.
As You see it is Non-symetrical BUT it can be forced in upside down and if
You use back side connecter it is even easier while it's hard to see what's
going on.
If this has happened = You have a broken Camera.
It will be controlable by iMovie
will record and play normally via lens/analog connector
but - NO import or export via FW-connector
Analog/digital chip blown. Expencive repair.
Yours Bengt W

Similar Messages

  • HT1222 Certain wifi's will not work on my iPad, it will show that it's connected but will not connect.

    Certain wifi's will not work on my iPad, it shows it's connected but will not connect.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps

    my ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • My mac is connected but will not display webpages

    My mac says I'm connected to wireless interent, but will not display the webpage. It says that it is not connected to the interent. My hp computer is working though. Does anyone know what is causing it not to connect to the interent and what I can do to get it to connect?
    Thanks

    Make sure in the network settings that you arent trying to connect to the internet through a Proxy server, unless you actually are of course. Make sure the connection you are using is set to get its IP address via DHCP automatically, and that the router you are connecting to is set up to do so.

  • Bluetooth connects but will not pair to device

    Iphone 5 running on 7.1.2. bluetooth connects to CAR KIT but will not pair (does not ask for code after connecting). audio only plays from phone and not through the speakers connected by bluetooth. I have done the apple trouble solution steps and the problem still persists. any help would be appreciated. the device is compatible with iPhone.

    Hey there jrf07d,
    It sounds like your phone is not pairing to your vehicles bluetooth connection. I would recommend these steps to get it paired, from the following article:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your accessory to attempt to connect it.
    Tap Settings > Bluetooth and turn Bluetooth off and then on again.
    Restart your iOS device.
    Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and "Forget this Device". Try to pair your Bluetooth accessory again.
    You may need to your Bluetooth accessory PIN again if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
    Restart your Bluetooth accessory by turning it off and then on again1.
    Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
    If your Bluetooth accessory has upgradable firmware, check to see that you have the latest version1, 2.
    Can't pair to a Bluetooth accessory
    If you see the word "Connected" next to a Bluetooth accessory in Settings > Bluetooth, your iOS device is already paired to a Bluetooth accessory. Remember, you can only connect to one Bluetooth accessory at a time.
    If your Bluetooth accessory requires a PIN for pairing, be sure that you are entering the correct PIN1.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Facetime keeps connecting but will not answer

    facetime will connect on ipad but will not answer - "facetime failed" message comes up.
    does anyone know why?

    Read this and see if it helps
    http://support.apple.com/kb/TS5419
    After april 16 all devices using facetime must be updated to a certain level to work

  • Itouch will charge on wall charger, but will not charge or show up when I plug it into the computer. All I get is a double beep and nothing happens. I uninstalled and re installed itunes. I shut down the computer and shut down the itouch. What next?

    I touch will not charge or show up on the computer. It charges on the wall charger. I uninstalled and re-installed itunes and I also restarted the itouch and the computer. What next?

    Play it safe with the charging.  Use the wall charger for at least an hour and then connect to the computer.  If iTunes still denies that it exists, go here:
    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Ipad has wifi connection but will not download

    Hi, I'm having an issue with my Ipad 2 iOS 7.1.2, it only started happening last night. IPad can see and is joined to wifi but will not download or send anything. Always times out after spinning wheel.
    Have tried connecting to and joined, various wifi routers in other houses. So know it's not the router. Still no Download or send.
    Have done a hard reset.
    Have reset the network settings.
    Any other suggestions. I'm at a bit of a loss.
    Oh and the iPad is away from my mac so can not reinstall or restore.

    Howdy PJRS,
    It sounds like you are unable to access the internet on your iPad, but you are indeed connected to a Wi-Fi network. I would use the troubleshooting from the following article to help you get that resolved:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Unable to access the Internet while connected to Wi-Fi
    If you're using a public or commercial network, you may need to log in or subscribe.
    Check to see if you have a self-assigned IP address:
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
    If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
    If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
    If they do not, consult with your network administrator or ISP for further assistance.
    If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Shows being connected, but will not run

    I have (2) I-pads in the house and after coming home from a long weekend both show that they are connected in the settings wi-fi but both will not run any wi-fi programs. I have Mac computer that works fine and my I-phoneG-3 works fine, all which worked ok before we left for the long weekend. I have turned off the I-Pads to reboot and still does not connected. Need Help!

    Try:
    - Powering off an then back on your router
    - On the iPad reset network settings:Settings>General>Reset>Reset Network Settings.

  • Airport shows being connected but will not connect to internet

    Airport will not connect to internet yet shows me as connected. 
    When and if I do get connected, I will loose the connection and unable to access the internet.
    This has happened using several different wireless locations.
    Please help as to what my settings should be or how to correct the problem

    What debugging steps have you taken?
    Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
    If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x?

  • Usb connected but will not sync iphone

    I'm trying to sync my grandma's iPhone but it will not. i get it under the devices section but can't sync it.I have the latest iTunes, and Internet. help me please.

    Solution:
    I fixed it! It seems some files in the iPod were corrupt. Here's the resolution:
    1. Put the iPod into Disk Mode (see http://support.apple.com/kb/HT1363)
    2. Connect it to the PC. If iTunes starts, close the program.
    3. Use Windows Explorer to browse the files on the iPod device. In my case, it was showing as drive G:(IPOD).
    4. You may need to configure Windows Explorer to show hidden files: in the Tools / Folder Options / View tab, select the "show hidden files and folders" option.
    5. In my case, there was a file \bootex.log showing that some files were corrupt. I deleted the files it listed.
    6. There was also a folder \found.000 containing recovered file fragments. I deleted all the .CHK files in this folder.
    7. Look in the folder \iPod_Control and you will see a folder called iTunes (it's a hidden folder). I renamed this folder to iTunes-OLD.
    8. Using the Windows "safely remove hardware", stop the iPod device.
    9. Reset the iPod (hold the centre & menu button till the Apple appears).
    10. Reconnect the iPod and start iTunes (if it doesn't start itself).
    11. It will now recognise the iPod. You may have the re-load the library and settings, but at least it now works!
    Good luck!

  • I'm at work and my Mac book pro is saying its connected  but will not display a web page. Others who have the MacBook is connected. Tried to restart. Please help

    I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working

    You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"

  • BEFW11S4 Problems - Says connected but will not connect to Internet

    Hello, everyone, I have one desktop hooked up to a BEFW11S$ router. I also have another desktop and a notebook running off of it. The main one, as well as the other desktop work perfectly fine, while the other desktop is just a  bit on the slow side, but the laptop, which says it is connected will not connect to any form of internet, whether it be IE or MSN. I'm not sure, but I think the connection between the computers needs re-establishing. Though I have no idea how to go about doing this... Any help? T.T
    Message Edited by ravens6938 on 01-02-200702:23 PM

    Hi… I would suggest you to delete preferred wireless networks on your wireless laptop, and then try to reconnect to the wireless network. Also check what ip address you are getting, is it a valid ip address from the router. Try deleting cookies in internet explorer. Then check the connection. You cannot change anything on the router because other two computers are working fine.

  • Iphoto recognizes my camera but will not import the photos becasue of the format, what do I need to do?

    Iphoto will recognize my camera, but it doesn not import the pictures.  It will give me an error message stating that it is the wrong format.  Has anyone had this experience and can you advise?
    Thanks,  Jeff

    Well it wold help a lot is you provided some details
    What version of iPhoto? what camera? what format are you shooting? when did you last reformat yoru memory card? what has recently changed? has it every worked? any other information that might =hlep a totla strange who only know swha tyou tell them to assist you?
    LN

Maybe you are looking for

  • FS10N and FBL3N

    SAP Guru's, I need your help.  I am trying to view activity by G/L using t-code FS10 and FBL3 however I get a message telling me that Account NNNNN NNNN not posted to in fiscal year 2007 or trans. figures archived.  We are new to SAP and I suspect th

  • Trouble when adding / modifying authorization objects in a role through ERM

    Hi everyone!!! We're having some issues when configuring ERM, we followed the Post-Installation guides and we are done with the config part, but when we try to do an example creating a role, we're getting an error message when attempt to add the auth

  • Noob Question 1: Selecting Objects On Layer Like CorelDraw?

    Hi, I'm moving from CorelDraw. (I know this makes a lot of people laugh, but it's a great program. I'm moving to Adobe just because the pre-press house we're using demands it. Anyhoo... In CorelDraw, there is a button one use to see in a sort of 'tre

  • Computer broken, how to transfer music from ipod to the new computer?

    Hi, so the problem is that my computer got broken and all my music went down with that also. Now i want to put the music on my ipod to my new computer so how do I do it? Or can I even do it? I hope so. So, please tell me! Thanks

  • How do I keep a meeting open on Adobe Connect continuously?

    I was wondering if anyone could tell me how to keep a meeting open continuously on Adobe Connect? So that anyone could enter the meeting at anytime. Please help.